Kramer H2A-IN2-F34 Manual


Læs nedenfor 📖 manual på dansk for Kramer H2A-IN2-F34 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
VS- Card 34 Family Quick Start
P/N:
2 9 0 0 - 3 0 1 2 0 9 QS
Rev:
1
Scan for full manual
VS-34 Family Card Installation Sheet
Quick Start Guide
This guide helps you install and use your VS-34 Family Card for the rst time.
Go to www.kramerav.com/downloads/VS-34FD to download the latest user manual.
The attached card mounts in one of the slots on the rear of the chassis. Slots are numbered from left to right.
(The process for inserting cards is the same for all cards and the figures are for illustration purposes only.)
Input and output cards m be mounted in any slotay .
To install an I/O card:
1. Power o the machine and all devices connected to it.
2. Using a Phillips screwdriver, loosen the screws at the top and bottom of the blanking plate.
3. Remove the blanking plate from the slot and store it for possible future use.
4. Remove the new card from its shipping box and anti-ESD bag.
5. Holding the card by the lower handle, align the card with the plastic guide rails.
6. Slide the card into the chassis until the front of the card contacts the connector inside the chassis.
7. Press the card rmly into the slot until the
connector plate is ush with the rear panel of
the chassis and the connector is fully seated.
8. Using a Phillips screwdriver, tighten the
retaining screws at the top and bottom of the
card to secure it to the chassis.
9. Power on the machine and follow the
procedure in the user manual to congure
the new card.
10. Power on the peripheral devices.
VS- HDMI Card 34
For optimum range and performance use the recommended Kramer cables available at www.kramerav.com.
Using third-party cables may cause damage!
Safety Instructions
Caution: There are no operator serviceable parts inside the unit.
Warning: Use only the power cord that is supplied with the unit.
Warning: Do not open the unit. High voltages can cause electrical shock! Servicing by qualied personnel only.
Warning: Disconnect the power and unplug the unit from the wall before installing.
See for updated safety information www.kramerav.com


Produkt Specifikationer

Mærke: Kramer
Kategori: Ikke kategoriseret
Model: H2A-IN2-F34

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer H2A-IN2-F34 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Kramer Manualer

Kramer

Kramer AD-RING Manual

3 Januar 2025
Kramer

Kramer VSM-4x4A Manual

19 December 2024
Kramer

Kramer VS-6464DN-EM Manual

19 December 2024
Kramer

Kramer VIA GO3 Manual

19 December 2024
Kramer

Kramer VS-8FDxl Manual

19 December 2024
Kramer

Kramer VA-4X Manual

19 December 2024
Kramer

Kramer VA-14 Manual

19 December 2024
Kramer

Kramer VS-48HDxl Manual

19 December 2024
Kramer

Kramer VS-44HDxl Manual

19 December 2024
Kramer

Kramer VP-81KSi Manual

19 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AXESS

AXESS AXTC-TY1 Manual

27 Januar 2025
AXESS

AXESS AXDI-FOC Manual

27 Januar 2025
Adj

Adj LTS-10B Manual

27 Januar 2025
Neutrik

Neutrik NL4FXX-W-S Manual

27 Januar 2025
DOD

DOD Chthonic Fuzz Manual

27 Januar 2025
URC

URC MRX-15 Manual

27 Januar 2025