Kramer SID-DVI Manual


Læs nedenfor 📖 manual på dansk for Kramer SID-DVI (2 sider) i kategorien AV forlænger. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
The Kramer SID- DVI Step-In Commander DVI
Congratulations on purchasing your Kramer DigiTOOLS
® SID-DVI DVI Step-In
Commander which is ideal for boardrooms and presentation rooms.
The Kramer is a and unbalanced stereo audio remote control commander SID-DVI DVI
that is used to remotely take control of a compatible switcher, for example, the
VP-81SID. The commander is HDCP compliant and does not need a power adapter if
located within 50m (1 ft) of the switcher. 64
Figure 1 Table 1 and define the . SID- DVI DVI Step-In Commander
Figure 1 SID-DVI DVI Step-In Commander Front and Rear Panel :
Table 1 SID-DVI DVI Step-In Commander Front and Rear Panel Features :
#
Feature
Function
1
AUDIO INPUT 3.5mm Mini Jack
Connect to the unbalanced stereo audio source
2
DVI INPUT DVI Connector
Connect to the DVI video source
3
STEP Button IN
Press to switch the input to this remote control commander. The
button lights when active
4
ON LED
Lights green when the unit receives power
5
LINE OUT Twisted Pair RJ-45
Connector
Connect to the TP input of a compatible switcher (for example,
the VP-81SID) using CAT 6 or higher specification cable
6
Remote Switch Terminal Block
Connections (pins 2 and 3)
Connect to the remote step-in switch
7
12V DC Power Connector
Connect to the power adapter
8
Remote LED Terminal Block
Connections (pins 1 and 3)
Connect to the remote LED (observe correct polarity, pin 1 to the
LED anode and pin 3 to the cathode) )
Figure 2 shows the wiring connections of the SID-DVI.
Figure 2 SID-DVI Wiring Connections :
To connect the SID- as illustrated in : DVI Figure 2
1. Connect the DVI video sourc (for example, a computer graphics source to the e )
D connector on the front panel of the VI SID-DVI.
2. Connect the unbalanced stereo audio source (for example, a computer graphics
source) to the 3.5mm mini jack AUDIO INPUT connector on the front of the
SID-DVI.
3. Using STP cable, connect the LINE OUT RJ-45 connector on the rear panel of the
SID- -81SIDDVI to one of the inputs on the rear panel of the VP (up to 50m away).
4. Optional Connect the terminal block on the rear of the to the remote SID-DVI
switch and LED.
Note: The LED supply includes a current limiting resistor and is designed to work
with any standard LED.
5. Connect the power adapter to the 12V DC connector on the rear of the SID-DVI
and to the mains electricity (if the distance exceeds 50m ( ft) from the switcher). 164


Produkt Specifikationer

Mærke: Kramer
Kategori: AV forlænger
Model: SID-DVI

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer SID-DVI stil et spørgsmål nedenfor, og andre brugere vil svare dig




AV forlænger Kramer Manualer

Kramer

Kramer EXT3-U3-T Manual

20 Januar 2025
Kramer

Kramer VP-427X2 Manual

19 December 2024
Kramer

Kramer TP-594Rxr Manual

19 December 2024
Kramer

Kramer TP-752R Manual

19 December 2024
Kramer

Kramer TP-780T Manual

19 December 2024
Kramer

Kramer TP-594Txr Manual

19 December 2024
Kramer

Kramer TP-752T Manual

19 December 2024
Kramer

Kramer TP-583Txr Manual

19 December 2024
Kramer

Kramer W-3H2 Manual

19 December 2024
Kramer

Kramer WP-872xr Manual

19 December 2024

AV forlænger Manualer

Nyeste AV forlænger Manualer