Kyocera ECOSYS P7040cdn Manual

Kyocera Printer ECOSYS P7040cdn

Læs nedenfor 📖 manual på dansk for Kyocera ECOSYS P7040cdn (7 sider) i kategorien Printer. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/7
Installaon Manual
Type
LED Power Supply
Families
AP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD,
PLC, PLD, PLM, PLN, PLP, PWM, ULP
Introducon
The LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an
adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of
them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.
Mean Well’s LED power supplies include metal case, plasc case, and PCB types.
Installaon
( )1 Before commencing any installaon or maintenance work, please disconnect the power supply from the ulity.
Ensure that it cannot be re-connected inadvertently!
( )2 Keep proper venlaon around the unit and do not stack any object on it. Also a 10-15 cm clearance must be
kept when the adjacent device is a heat source.
( )3 Mounng orientaons other than standard orientaon or operate under high ambient temperature may
increase the internal component temperature and will require a de-rang in output current. Please refer to
the specicaon sheet to receive the opmum mounng posion and informaon about the -rang curve. de
( )4 Current rang of an approved primary /secondary cable should be greater than or equal to that of the unit.
Please refer to its specicaon.
( )5 For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighng
xture is ght so that water cannot intrude into the system.
( )6 For dimmable LED power supplies, make sure that your dimming controller is capable of driving
these units. For ELN series, either “D” or “Ptype, require 40mA each unit; for those with “3 in 1” dimming
funcon, e.g. HLG and LPF series, require 0.15mA each unit.
( )7 Wiring: The wire color will vary by country, please refer to the table below.
North America
European Harmonized
Live and ACL
Black
Brown
Neutral and ACN
white
Blue
PE and FG (Class I only)
Green
Green/yellow
( )a Connect the FG wire (green or green/yellow) of the LED power supply to (green or green/yellow), this PE
step can be skipped when the unit is marked class II, ungrounded.
( )b Connect the ACL wire (black or brown) of the LED power supply to Live (black or brown).
( )c Connect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).


Produkt Specifikationer

Mærke: Kyocera
Kategori: Printer
Model: ECOSYS P7040cdn

Har du brug for hjælp?

Hvis du har brug for hjælp til Kyocera ECOSYS P7040cdn stil et spørgsmål nedenfor, og andre brugere vil svare dig




Printer Kyocera Manualer

Printer Manualer

Nyeste Printer Manualer

Huawei

Huawei PixLab X1 Manual

21 December 2024
HP

HP Deskjet 3000 Manual

21 December 2024
HP

HP LaserJet P3005x Manual

21 December 2024
Samsung

Samsung SCX-3205 Manual

21 December 2024
Pantum

Pantum BP4200DN Manual

20 December 2024
Pantum

Pantum BP4200DW Manual

20 December 2024
Pantum

Pantum BM4200AD Manual

20 December 2024
Pantum

Pantum BM4200ADN Manual

20 December 2024