Kyocera Qua Tab 01 Manual

Kyocera Smartphone Qua Tab 01

Læs nedenfor 📖 manual på dansk for Kyocera Qua Tab 01 (3 sider) i kategorien Smartphone. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
June 2015, 1st Edition
Basic Manual
使い方ガ(operation guide)
Qua tab 01 includes a convenient " (operation guide) app". 使い方ガイド
In the Home screen, [Apps] tap " (operation guide)". You → 使い方ガイド
will be able to view detailed instructions in video and images.
- 7 -
Description of Operations for Selecting Item/Icon/
Button etc.
The notations used for operation procedures in this manual are as follows.
Tapping is to select a key or icon displayed on the screen by lightly tapping it
with your finger.
Description Explanation
Home screen
[Settings] [Wi-Fi]
Tap " (Settings)" at the bottom of the Home
screen. Continue by tapping "Wi-Fi".
In sleep mode,
F (Power button)
In sleep mode, press F (Power button).
* Unless specified otherwise, steps describe operations using onscreen keys.
Notes on Illustrations/Screenshots
This manual gives screens and operations for the product with an au Nano IC
Card 04 LE installed.
Screen illustrations shown in this manual may look different from the actual
screens.
In some cases, minor details or a part of a screen may be omitted.
Notations used in this manualActual screen
In this manual, some
icons on a screen
are omitted.
- 14 -
Removing the au Nano IC Card 04 LE
󱈠 Turn the power off and open the card slot cover
󱈢 Pull tray straight out by groove
Groove
󱈤 Remove the au Nano IC Card 04 LE, then insert the tray in
the slot without bending, aligned with the rib on the right
of the slot
Projection on left
Rib
󱈦 Close the card slot cover
- 1 -
Preface
Thank you for buying the "Qua tab 01" (simply called the "product" or "main
unit" from here on).
Before use, please read the "Setting Guide", "Notes on Usage", or "Basic
Manual" (This Manual) for proper usage.
List of Packaged Items
Before your start using the product, make sure that you have all the following
packaged with the product.
Main unit
取扱説明書
(Basic Manual) (Japanese)
ご利用にあたっての注意事項
(Notes on Usage) (Includes warranty)
(Japanese)
設定ガイド
(Setting Guide) (Japanese)
The following items are not included in
the package.
microSD memory card
AC adapter
microUSB cable
Earphones
Purchase a specified charger (sold separately).
The illustrations in the manual are used only for explaining. They may
differ from the actual product.
The battery is built into the product.
- 8 -
Operations from the vertical display are mainly described. Menu items/
icons/buttons on a screen may be different from the ones in the horizontal
display.
Menu items/layers/icons may be different depending on functions,
conditions, etc.
In this manual, screenshots for body color "White" are provided as
examples.
In this manual, "microSD™ memory card", "microSDHC™ memory card"
and "microSDXC™ memory card" are abbreviated as "microSD memory
card" or "microSD".
All of the indicated amounts exclude tax unless otherwise specified.
- 15 -
Attaching/Removing a microSD Memory Card
Attaching a microSD Memory Card
󱈠 Open the card slot cover
󱈢 Confirm the direction of the microSD memory card and
slowly insert it into the slot until it clicks
Insert a microSD memory card until you hear a click and confirm it is
locked. Releasing the microSD memory card before it is locked may
cause it to pop out.
microSD memory card slot (left)
au Nano IC Card 04 LE slot (right)
󱈤 Close the card slot cover
Insert a microSD memory card with the right side up in the appropriate
direction. Inserting a microSD memory card forcefully into the slot could
result in failure to remove the microSD memory card or damage to the
microSD memory card.
- 2 -
About Operating Instructions
"Basic Manual" (This manual)/"Setting Guide"
Handles only basic operations for main features.
For detailed descriptions on various functions, refer to the "Instruction Manual
application" (Japanese) installed on the product or " (Full 取扱説明書 詳細版
Instruction Manual)" (Japanese) available on the au homepage.
( http://www.au.kddi.com/support/mobile/guide/manual/)
Company names and product names referred to in this manual are
trademarks or registered trademarks of respective companies.
"Instruction Manual Application" (Japanese/English)
You can use the "Instruction Manual application" (Japanese) on the product to
confirm detailed operational procedures.
Certain functions can be directly activated from the application screens on
which their operations are described.
Home screen [Apps] [ (Instruction Manual)] → 取扱説明書
Also, you can use the "Instruction Manual application" (English version) on the
product to check operational procedures.
Home screen [Apps] [Basic Manual]→ →
To use the applications for the first time, you need to download and install
them by following on-screen instructions.
Downloading Manuals
You can download the English version of the Basic Manual from the au
website.
Download URL:
( http://www.au.kddi.com/english/support/manual/)
- 9 -
Names and Functions of Parts
③ ⑤
- 16 -
Removing a microSD Memory Card
󱈠 Home screen [Settings] [Storage] [Unmount SD → →
card] [OK]
󱈢 Open the card slot cover
󱈤 Slowly push the microSD memory card toward the slot
until it clicks
When a click sound is heard, pull your finger with the microSD memory
card touched. Keep putting your finger on the microSD memory card until
it comes out a little. Releasing the microSD memory card when pushed
hard may cause it to pop out.
󱈦 Slowly remove the microSD memory card
Slowly pull the microSD memory card straight out.
Some microSD memory cards cannot be unlocked and do not come out
smoothly. In such case, pull it out with your finger.
󱈨 Close the card slot cover
- 3 -
When Using the Product
Before using the product, be sure to read the "Notes on Usage" for proper
usage.
Before you assume that the product is malfunctioning, check for possible
remedies in the following au Customer Support site of au homepage:
( http://www.au.kddi.com/english/support/)
During communication, maintain a 1.5-cm separation from yourself with no
metal (parts) located in between.
Communication is not possible even inside the service area in places where
the signal does not reach (e.g. tunnels and basements). Also,
communication is sometimes not possible in poor r eception areas.
Communication is sometimes interrupted if you move into a poor reception
areas during communications.
Since this product uses radio waves, the possibility of communication
interception by third parties cannot be eliminated. (Although, the 4G (LTE/
WiMAX 2+) system has highly secure confidential communication features.)
This Product is designed for use in Japan only and cannot be used in any
other country.
Since this product is a radio station under the Radio Law, you may be asked
to temporarily submit the product for inspection in accordance with the
Radio Law.
IMEI information of the product is automatically sent to KDDI CORPORATION
for maintenance and monitoring operational status of the product.
The Company is not liable for any damages arising from earthquakes,
lightning, storms, floods or other natural disasters, as well as fires, actions
by third parties, other accidents, intentional or mistaken misoperation by the
customer, or use under other unusual conditions outside the responsibility of
the Company.
The Company is not liable for any incidental damages (change/
disappearance of described content, loss of business income, disruption of
business, etc.) arising from use or inability to use the product.
The Company is not liable for any damages arising from failure to observe
the described content of this manual.
The Company is not liable for any damages arising, for example, from
malfunction caused by combination with connected devices or software not
related to the Company.
- 10 -
Earphone microphone terminal
F Power button
Power ON/OFF, activate/deactivate sleep mode, etc.
In camera (lens)
Speaker
Notification tone or alarm sound can be heard from here.
Light sensor
Detects the ambient light level to adjust the display brightness.
Display (touch panel)
External connection terminal
Used for connecting Common AC Adapter 05 (sold separately), microUSB
Cable 01 (sold separately), etc.
Out camera (lens)
Built-in Wi-Fi
® antenna
*
- 17 -
Do not touch the terminal part of microSD memory card.
Do not remove the microSD memory card forcefully. It may result in
damage to the microSD memory card or the data loss.
The microSD memory card may be warm after a long time use. It is
normal.
Charging
When you purchase your product, the internal battery is not fully charged.
Make sure to charge the product before use.
The product may become warm while charging, depending on the
situation, but this is not abnormal.
Charging while using camera etc. may take longer.
When you operate the product with the specified charger (sold
separately) connected, the product may repeat short-time charging/
discharging resulting in short battery life.
When temperature of environment or the product becomes extremely
high or low, charging may be stopped. Try to charge the battery as far as
possible at room temperature.
Do not allow conductive for
eign objects (metal fragments, pencil leads,
etc.) to come into contact with or get inside the connection terminals.
The magnetic field produced during charging may prevent the magnetic
sensor from working properly.
- 4 -
Captured image data or downloaded data may sometimes be altered or lost
due to faults, repair or other handling of the product. The Company is not
liable for any damage or lost income resulting from recovery of these data.
It is recommended you keep a copy of important data in your PC's hard disk,
etc. Whatever the cause of fault or malfunction may be, the Company
assumes no responsibility for alteration or loss of saved information.
Contents saved in the product, such as contacts, mails and favorites, might
be altered or lost in an accident, fault, repair or mishandling. Be sure to keep
a copy of important contents. Note that Company assumes no responsibility
for any damages or lost profits resulting from altered or lost contents.
Note that content data (both charged or free content) saved with the product
cannot be returned to the customer when the product is replaced for repair
of a fault, for example.
The product uses liquid crystal for its display. The display response speed
may become slow when the ambient temperature is low, which is due to the
property of liquid crystal and not a malfunction. Display response speed will
return to normal at room temperature.
Although the display used on the product is made using high-precision
technology, some pixels (dots) might be lit or out at all times. This is not a
malfunction.
You are recommended to store copies of individual data such as photos you
took, videos and music on your PC by sending each file as mail attachment,
etc. Note, however, that you may not be able to make copies of any
copyrighted data even by the above-mentioned means.
Do not discard the product together with regular trash. Please cooperate in
the collection of the product when it is no longer needed to protect the
environment and effectively use resources. Old product is collected at au
shops and other places.
* "The Company" as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: KYOCERA Corporation
Note
Reproduction of the content of this manual in part or in whole is prohibited.
The content of this manual is subject to change without notice.
Every effort has been made in the preparation of this manual. Should
you notice any unclear points, omissions, etc., feel free to contact us.
- 11 -
d Volume UP/DOWN button
Adjusts sound volume.
Built-in main antenna
*
Built-in GPS antenna
*
Card slot cover
au Nano IC Card 04 LE slot
microSD memory card slot
Built-in sub antenna
*
Microphone
Used when recording voice, etc.
* Do not cover antennas with your hand or put stickers etc. It might affect
communication quality.
Do not place stickers, etc. over light sensor.
The back cover of the product is not removal. Removing the back cover
with force may cause damage or malfunction.
The battery is built into the product and it is not user replaceable. For
force shutdown and restarting, see "Force Shutdown and Restarting"
( P. 20).
- 18 -
Charging with a Specified AC Adapter (Sold
Separately)
Charging with Common AC Adapter 05 (sold separately) is explained. For
information on specified AC adapters (sold separately), see "Related
Accessories" ( P. 32).
󱈠 Check the orientation of the microUSB plug of Common
AC Adapter 05 (sold separately) and insert it straight into
the external connection terminal
Common AC Adapter 05 (sold separately)
With the
projection
facing down
- 5 -
Tablet Etiquette
Use of the product is not allowed in the following
places!
Do not listen to music or watch videos while driving a car or motorbike, or
riding a bicycle. Use while driving a car or motorbike is prohibited by law.
(Use while riding a bicycle may also be punishable by law.) In addition, stay
alert to the traffic around you even when walking. Surrounding sounds may
not be heard clearly, and gazing at the screen might distract your attention
causing a traffic accident. Be especially careful at railroad crossings, on a
platform, and at pedestrian crossings.
Use of tablets on board aircraft is restricted. Follow the instructions of each
airline.
Consider people around you!
To prevent the notification tone, etc. from bothering other people, power off
or set the notification tone not to sound at a movie theater, theater, museum,
library, etc.
In a city area, use in a place where you do not bother people walking.
It is extremely dangerous to walk while looking at the screen. Do not operate
a tablet while walking or by stopping suddenly.
Move to a place where you do not disturb others while you are in shinkansen,
a hotel lobby, etc.
Be careful of sound leakage from earphones in trains or other places with
many people around you.
Ask permission if you take photos with your camera.
There may be a person with a cardiac pacemaker nearby at a place filled
with people such as in a crowded train. Set "Airplane mode" or turn off
beforehand.
When a medical institution has laid down designated areas where use of the
product is prohibited or is not allowed to be brought in, abide by the
instructions of that medical institution.
- 12 -
au Nano IC Card 04 LE
The au Nano IC Card 04 LE contains customer phone number and other
information.
The product is compatible with au Nano IC Card 04 LE only. You cannot use
the product with an IC card other than au Nano IC Card 04 LE.
IC (metal) part
au Nano IC Card 04 LE
Before attaching/removing au Nano IC Card 04 LE, be sure to remove a
power plug of specified AC adapter etc. from the product.
Attaching the au Nano IC Card 04 LE
󱈠 Turn the power off and open the card slot cover
- 19 -
󱈢 Insert the power plug of Common AC Adapter 05 (sold
separately) into an outlet (100 VAC to 240 VAC)
When the battery power turns on, " " appears on the status bar.
Common AC Adapter 05 (sold separately)
󱈤 When charging ends, pull out the microUSB plug of
Common AC Adapter 05 (sold separately) straight from the
external connection terminal
󱈦 Pull out the power plug of Common AC Adapter 05 (sold
separately) from the outlet
Note that applying unnecessary force with the external connection
terminal connected to the external device might cause damage.
- 6 -
Notations Used in This Document
Note on Button Illustrations
In this manual, buttons are represented by simplified illustrations as shown
below.
r
(Volume
UP
button)
l
(Volume
DOWN
button)
Navigation bar
F (Power button)
CHN
- 13 -
󱈢 Pull tray straight out by groove
Groove
󱈤 Place the au Nano IC Card 04 LE on the tray, IC (metal) part
up, then insert the tray with the au Nano IC Card 04 LE all
the way in without bending, aligned with the rib on the
right of the slot
Note direction of notch.
Notch
Projection on left
Rib
󱈦 Close the card slot cover
- 20 -
Turning the Power On/Off
Turning the Power On
󱈠 F (Power button) (press and hold for at least 2 seconds)
The Start screen is displayed ( P. 21 "The Start Screen").
For the first time the product turns ON, the initial settings such as "au
Easy Setting" activate. Make the settings as required.
While logos are displayed after the power is on, initial settings for touch
panel are in process. Do not touch the screen. The touch panel may not
work properly.
"au Easy Setting" can be set up later even though it is skipped the first
time starting up the product.
Turning the Power Off
󱈠 F (Power button) (press and hold for at least 1 second)
󱈢 [Power off]
Force Shutdown and Restarting
Force shutdown and restart the product when the screen freezes or the power
cannot be turned off.
󱈠 F (Power button) (press and hold for at least 11 seconds)
If the product is forced shutdown and restarted, unsaved data will be
erased. Do not force shutdown except when the product becomes
inoperative.


Produkt Specifikationer

Mærke: Kyocera
Kategori: Smartphone
Model: Qua Tab 01

Har du brug for hjælp?

Hvis du har brug for hjælp til Kyocera Qua Tab 01 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Smartphone Kyocera Manualer

Smartphone Manualer

Nyeste Smartphone Manualer

Logicom

Logicom Le Up Manual

7 September 2024
ZTE

ZTE Grand X Pro Manual

7 September 2024
Aligator

Aligator R35 eXtremo Manual

6 September 2024
HMD

HMD Crest Manual

5 September 2024
Aplic

Aplic 302144 Manual

4 September 2024
CSL

CSL 300588 Manual

3 September 2024
CSL

CSL 301096 Manual

3 September 2024
CSL

CSL 300831 Manual

3 September 2024
CSL

CSL 300589 Manual

3 September 2024
Nokia

Nokia 225 4G (2024) Manual

3 September 2024