La Crosse Technology 30416 Manual


Læs nedenfor 📖 manual på dansk for La Crosse Technology 30416 (2 sider) i kategorien Clockradio. Denne guide var nyttig for 53 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Page 3 Page 4Page | 2
.9-inch LED Alarm Clock
with Dual Charging Ports
Model: 30416 & 30417
DC: 011419
POWER UP
1. Insert the 120 volt power cord into an outlet, then into your
clock. Optional: Insert one 9 volt battery for backup.
2. 12:00 will flash as an indication to set the time and/or alarm.
TIME SETTING
1. Continuously hold down the TIME button while setting your hour
and minutes.
2. While holding the TIME button, press the HOUR button to set
your hour. Note: The PM indicator will appear when you advance
to PM time.
3. Press the MINUTE button to set your minutes.
4. Release the TIME button when the correct time is shown on the
display.
USB CHARGING PORT
• Connect your external device’s USB charging cable (not included) to the
USB charging port.
• USB Power Output: 5V 1A or 2A maximum current.
• Charge devices that are self-regulating.
TIME ALARM
• Slide the ON/OFF switch to the ON position to activate the alarm
• Slide the ON/OFF switch to the OFF position to deactivate the alarm
ALARM ON/O FF
1. Continuously hold down the ALARM button while setting your alarm
time.
2. While holding the ALARM button, press the HOUR button to set your
alarm hour. Note: The PM indicator will appear when you advance to
PM time.
3. Press the MINUTE button to set your alarm minutes.
4. Release the ALARM button when the correct alarm time is shown on the
display.
SNOO Z E
• When alarm sounds, press the SNOOZE button to silence alarm for 8
minutes.
• Snooze function can be repeated many times if desired.
• Always purchase the correct size and grade of battery most suitable for
intended use.
• Clean the battery contacts and also those of your clock prior to battery
installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for an extended
period of time.
• Promptly remove an expired battery.
CARE & MAINTENANCE
BATTERY BACKUP
• Insert one “9V” battery into the battery compartment on the back of the
clock. The battery will keep the alarm and time settings until the power
is restored.
• The LED display will not light-up but the alarm will sound at the preset
alarm time.
• If there is no battery installed but the power is interrupted, the display
will flash at 12:00 and the time and alarm need to be set again.
Power: 120V power cord
Requires one 9V battery for back-up not included
Dimensions: 2.75”H x 4.92”W x 2.32”D
POWER REQUI REMENTS
PM Light
Indicator
Alarm Light
Indicator
Time
Display
Hour MinuteAlarmTime Snooze
Alarm ON\OFF
Switch
PM
AL
DC5V 1 A DC5V 2 A
TIME
H O U R
M
I N
A L A R M
DIMMER
HIL
O
A LARM
O
F
F
O
N
Dimmer HI \ LO
Switch
1 Amp. 2 Amp.
USB Cord not included
Brighter: Slide the HI/LO display dimmer switch to HI position.
Normal: Slide the HI/LO display dimmer switch to LO position.
CLOCK D IMME R SWI TCH


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Clockradio
Model: 30416

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 30416 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Clockradio La Crosse Technology Manualer

Clockradio Manualer

Nyeste Clockradio Manualer

ADE

ADE CK 1706 Manual

15 November 2024
Numan

Numan Mini One Manual

3 November 2024
Insignia

Insignia NS-ALCL24 Manual

15 Oktober 2024
JVC

JVC RA-E314B Manual

10 Oktober 2024
Denver

Denver CRL-340 Manual

4 Oktober 2024
Roadstar

Roadstar CLR-450R Manual

4 Oktober 2024
Caliber

Caliber HCG 011DAB Manual

4 Oktober 2024
Muse

Muse M-188P Manual

4 Oktober 2024