La Crosse Technology 30902 Manual


Læs nedenfor 📖 manual på dansk for La Crosse Technology 30902 (2 sider) i kategorien Clockradio. Denne guide var nyttig for 27 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Page 3 Page 4Page | 2
0.9” 12 VOLT RED
LED ALARM CLOCK
Model: 30902
DC: 022421
PO W E R U P
1. Insert the 12V car plug into a 12V car outlet. Optional: Insert one
9 volt battery for backup.
2. 12:00 will flash as an indication to set the time and/or alarm.
TI M E S E T TI N G
1. Continuously hold down the TIME button while setting your hour
and minutes.
2. While holding the TIME button, press the HOUR button to set
your hour. Note: The PM indicator will appear when you advance
to PM time.
3. Press the MINUTE button to set your minutes.
4. Release the TIME button when the correct time is shown on the
display.
TI M E A L A R M
ON HI: Slide the ALARM HI/LO/OFF switch to the HI position to turn
the alarm on at the highest volume (90db). The alarm light indicator will
appear.
ON LO: Slide the ALARM HI/LO/OFF switch to the LO position to turn the
alarm on at a normal volume. The alarm light indicator will appear.
OFF: Slide the ALARM HI/LO/OFF switch to the OFF position to turn the
alarm OFF. The alarm light indicator will disappear.
A L A R M O N / O F F & V O LU M E
1. Continuously hold down the ALARM button while setting your alarm
time.
2. While holding the ALARM button, press the HOUR button to set your
alarm hour. Note: The PM indicator will appear when you advance to
PM time.
3. Press the MINUTE button to set your alarm minutes.
4. Release the ALARM button when the correct alarm time is shown on the
display.
S N O O Z E
• When alarm sounds, press the SNOOZE button to silence alarm for 8
minutes.
• Snooze function can be repeated many times if desired.
• Always purchase the correct size and grade of battery most suitable for
intended use.
• Clean the battery contacts and also those of your clock prior to battery
installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for an extended
period of time.
• Promptly remove an expired battery.
C A R E & M A I N TE N A N C E
B AT T E R Y B AC K U P
• Insert one “9V” battery into the battery compartment on the back of the
clock. The battery will keep the alarm and time settings until the power
is restored.
• The LED display will not light-up but the alarm will sound at the preset
alarm time.
• If there is no battery installed but the power is interrupted, the display
will flash at 12:00 and the time and alarm need to be set again.
Power: 12V power cord. Requires one 9V battery for back-up not included
Dimensions: 1.90”H x 4.55”W x 2.10”D
PO W E R R E Q U I R E M E N TS
HOUR Button
SNOOZE Button
ALARM HI/LO/OFF Switch
MINUTE Button TIME Button ALARM Button
12V CAR PLUG
PM
Light
Indicator
Alarm
Light
Indicator
Time Display


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Clockradio
Model: 30902

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 30902 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Clockradio La Crosse Technology Manualer

Clockradio Manualer

Nyeste Clockradio Manualer

Sogo

Sogo SS-3905 Manual

17 December 2024
Denver

Denver CRL-320 - v2 Manual

17 December 2024
AKAI

AKAI AR150 Manual

17 December 2024
TriStar

TriStar CL 1489 Manual

17 December 2024
AKAI

AKAI AR 175D Manual

16 December 2024
Vimar

Vimar 20449.N Manual

15 December 2024
Vimar

Vimar 14449 Manual

15 December 2024
Vimar

Vimar 20449.B Manual

15 December 2024
Vimar

Vimar 20449 Manual

15 December 2024
Vimar

Vimar 16573 Manual

15 December 2024