Lancom GS-3152XSP Manual

Lancom Skifte GS-3152XSP

Læs nedenfor 📖 manual på dansk for Lancom GS-3152XSP (2 sider) i kategorien Skifte. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
T E C H N I C A L D A T A
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks
of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for
technical errors and / or omissions. 111584/0120
Hardware
Power supply Exchangeable power supply (110-230 V, 50-60 Hz)
Power consumption Max. 920 W when using one PSU, max. 1840 W when using two PSUs
Environment Temperature range 0–40° C; short term temperature conditions 0–50°C; humidity 10–90%;
non-condensing
Housing Robust metal housing, 19“ 1U (442 x 44 x 440 mm > W x H x D) with removable mounting
brackets, network connectors on the front
Number of fans 2 (3 when using 2 PSUs)
Interfaces
ETH
SFP
A48 TP Ethernet ports 10/100/1000 Mbps
A4 10 G SFP+ ports 1 / 10 Gbps
A52 concurrent ports in total
Declaration of Conformity
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in
compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of
the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
Package Content
Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)
Mounting brackets Two 19” brackets for rack mounting;
If an additional rear support surface is required for more stable mounting of the switch,
please use the LANCOM Switch Rack Mount L250, item no.: 61432, which is available as an
accessory.
Power supply unit 1x exchangeable power supply LANCOM SPSU-920
(expandable up to 2 PSUs for redundancy / higher PoE budget)
Cable 1 IEC power cord, 1 serial configuration cable 1.5 m
M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E
d 10 G SFP+ ports
Off Port inactive or disabled
Blue Link 10 Gbps
Blue, blinking Data transfer, link 10 Gbps
Green Link 1 Gbps
Green, blinking Data transfer, link 1 Gbps
c TP Ethernet ports
LEDs switched to Link/Act/Speed mode
Off Port inactive or disabled
Green Link 1000 Mbps
Green, blinking Data transfer, link 1000 Mbps
Orange Link < 1000 Mbps
Orange, blinking Data transfer, link < 1000 Mbps
LEDs switched to PoE mode
Off Port inactive or disabled
Green Port enabled, power supply to connected
device
Orange Hardware error
b ca
aConfiguration interface (Console)
Connect the configuration interface via the included serial
configuration cable to the serial interface of the device you want to
use for configuring / monitoring the switch.
bTP Ethernet interfaces
Use Ethernet cables to connect the interfaces 1 to 48 to your PC or
a LAN switch.
cSFP+ interfaces
Insert suitable LANCOM SFP modules into the SFP+ inter faces
49 to 52. Choose cables which are compatible with the SFP
modules and connect them as described in the module’s
documen tation.
dPower supply modules with power connectors
(device back side)
Supply power to the device via the power connectors of the
power supply modules on the device’s back side. Please use the
IEC power cables supplied (not for WW devices) or country-
specific LANCOM Power Cords.
DC
OK
AC
OK
D
D
D
DD
4
Please observe the following when setting up the device
AThe mains plug of the device must be freely accessible.
AFor devices to be operated on the desktop, please attach the adhesive rubber
footpads.
ADo not rest any objects on top of the device and do not stack multiple devices.
A Keep all ventilation slots of the device clear of obstruction.
AMount the device into a 19unit in a server cabinet using the provided screws and mounting brackets.
If an additional rear support surface is required for more stable mounting of the switch, please use the
LANCOM Switch Rack Mount L250.
APlease note that support for third-party accessories (SFP and DAC) is not provided.
LANCOM GS-3152XSP
Quick Reference Guide
C ud eadylo -r
b Mode/Reset button
Short press Port LED mode switch
~5 sec. pressed Device restart
7~12 sec. pressed Configuration reset and device restart
a System / PWR A / PWR B / Link/Act/Speed / PoE
System: off Device powered off
System: green Device operational
System: red Hardware error
PWR A / PWR B: off
PWR A / PWR B: green
Link/Act/Speed: green Port LEDs show link / activity status or
port speed
PoE: green Port LEDs show PoE status
b dca c
DC
OK
AC
OK
e f
e f Power supply unit LEDs
DC OK: green, blinking Secondary power supply OK
DC OK: red, blinking Secondary power supply failure
AC OK: green, blinking Primary power supply OK
AC OK: red, blinking Primary power supply failure
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.


Produkt Specifikationer

Mærke: Lancom
Kategori: Skifte
Model: GS-3152XSP

Har du brug for hjælp?

Hvis du har brug for hjælp til Lancom GS-3152XSP stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skifte Lancom Manualer

Lancom

Lancom CS-8132F Manual

7 Oktober 2024
Lancom

Lancom YS-7154CF Manual

7 Oktober 2024
Lancom

Lancom IGS-3510XUP Manual

1 September 2024
Lancom

Lancom XS-5116 Manual

30 August 2024
Lancom

Lancom GS-1326 Manual

30 August 2024
Lancom

Lancom XS-5110 Manual

30 August 2024
Lancom

Lancom GS-4554 Manual

30 August 2024
Lancom

Lancom XS-61 Manual

30 August 2024
Lancom

Lancom GS-3652 Manual

30 August 2024
Lancom

Lancom GS-4530 Manual

30 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Berker

Berker 80161865 Manual

16 December 2024
Berker

Berker 80262280 Manual

16 December 2024
Berker

Berker 80141170 Manual

16 December 2024
Berker

Berker 80162785 Manual

16 December 2024
Berker

Berker 80164773 Manual

16 December 2024
Berker

Berker 80162865 Manual

16 December 2024
Berker

Berker 80162780 Manual

16 December 2024
Berker

Berker 80142170 Manual

16 December 2024
Berker

Berker 80164776 Manual

16 December 2024
Berker

Berker 80262170 Manual

16 December 2024