Lancom GS-3528X Manual

Lancom Skifte GS-3528X

Læs nedenfor 📖 manual på dansk for Lancom GS-3528X (2 sider) i kategorien Skifte. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
T E C H N I C A L D A T A
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This docu-
ment contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111901/1121
Hardware
Power supply Internal power supply unit (110–230 V, 50–60 Hz)
Power consumption max. 50 watts
Environment Temperature range 0–40°C; short-term temperature range 0–50°C; humidity 10–90%;
non-condensing
Housing Robust metal housing, 19“ 1U (442 x 44 x 375 mm > W x H x D) with removable mounting
brackets, network connectors on the front
Number of fans 1
Interfaces
ETH A12 TP Ethernet ports 10 / 100 / 1000 Mbps
A12 TP Ethernet ports 10 / 100 / 2500 Mbps
A4 SFP/SFP+ ports 1 / 10 Gbps
A28 concurrent Ethernet ports in total
Declaration of Conformity
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in
compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of
the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
Package Content
Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)
Mounting brackets Two 19” brackets for rackmounting
Cable 1 IEC power cord, 1 serial configuration cable 1.5 m
M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E
e 10 G SFP+ ports
Off Port inactive
Blue Link 10 Gbps
Green Link 1000 Mbps
a System
System: off Device switched off
System: green Device operational
System: red Hardware error
aConfiguration interface (Console)
Connect the configuration interface via the included serial
configuration cable to the serial interface of the device you want to
use for configuring / monitoring the switch.
bTP Ethernet interfaces
Use Ethernet cables to connect the interfaces 1 to 24 to your PC or
a LAN switch.
cSFP+ interfaces
Insert suitable LANCOM SFP modules into the SFP+ interfaces
25 to 28. Choose cables which are compatible with the SFP
modules and connect them as described in the module’s
documen tation.
dPower connector (device back side)
Supply power to the device via the power connector. Please
use the IEC power cable supplied or a country-specific LAN-
COM Power Cord.
LANCOM GS-3528X
Quick Reference Guide
C ud eadylo -r
a b c
4Please observe the following when setting up the device
AThe mains plug of the device must be freely accessible.
AFor devices to be operated on the desktop, please attach the adhesive rubber
footpads.
ADo not rest any objects on top of the device and do not stack multiple devices.
A Keep the ventilation slots on the side of the device clear of obstruction.
AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.
c TP Ethernet ports 10M / 100M / 1G
LEDs switched to Link/Act/Speed mode
Off Port inactive or disabled
Green Link 1000 Mbps
Green, blinking Data transfer, link 1000 Mbps
Orange Link < 1000 Mbps
Orange, blinking Data transfer, link < 1000 Mbps
LEDs switched to PoE mode
Off Port inactive or disabled
Green Port enabled, power supply to connected
device
Orange Hardware error
d TP Ethernet ports 100M / 1G / 2.5G
LEDs switched to Link/Act/Speed mode
Off Port inactive or disabled
Green Link 2500 Mbps
Green, blinking Data transfer, link 2500 Mbps
Orange Link < 2500 Mbps
Orange, blinking Data transfer, link < 2500 Mbps
LEDs switched to PoE mode
Off Port inactive or disabled
Green Port enabled, power supply to connected
device
Orange Hardware error
D
D
D
DD
a b d ec
b Reset button
~5 sec. pressed Device restart
7~12 sec. pressed Configuration reset and device restart
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.


Produkt Specifikationer

Mærke: Lancom
Kategori: Skifte
Model: GS-3528X

Har du brug for hjælp?

Hvis du har brug for hjælp til Lancom GS-3528X stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skifte Lancom Manualer

Lancom

Lancom CS-8132F Manual

7 Oktober 2024
Lancom

Lancom YS-7154CF Manual

7 Oktober 2024
Lancom

Lancom IGS-3510XUP Manual

1 September 2024
Lancom

Lancom XS-5116 Manual

30 August 2024
Lancom

Lancom GS-1326 Manual

30 August 2024
Lancom

Lancom XS-5110 Manual

30 August 2024
Lancom

Lancom GS-4554 Manual

30 August 2024
Lancom

Lancom XS-61 Manual

30 August 2024
Lancom

Lancom GS-3652 Manual

30 August 2024
Lancom

Lancom GS-4530 Manual

30 August 2024

Skifte Manualer

Nyeste Skifte Manualer