Lancom XS-5116QF Manual

Lancom Skifte XS-5116QF

Læs nedenfor 📖 manual på dansk for Lancom XS-5116QF (2 sider) i kategorien Skifte. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2



 

 

 

 



 



 











 

 

 



 



 



 



Connect the configuration interface via the included serial 

configuration cable to the serial interface of the device you want

to use for configuring / monitoring the switch. Alternatively use

the interface with a suitable micro USB cable.



Connect a USB stick to the USB interface to store general

configuration scripts or debug data.

You can also use this interface to upload a new firmware.



Insert suitable LANCOM SFP modules into the SFP+ interfaces

1to 12. Choose cables which are compatible with the SFP

modules and connect them as described in the SFP modules

mounting instructions www.lancom-systems.com/SFP-module-MI.



Insert suitable LANCOM SFP modules into the SFP+ interfaces 13

to 14. Choose cables which are compatible with the SFP modules

and connect them as described in the SFP modules mounting

instructions www.lancom-systems.com/SFP-module-MI.



Connect the interfaces 13 to 14 via Ethernet cables to your PC or

a LAN switch.



 

 

 

 





 









 





  

  



 



Plug suitable LANCOM QSFP+ modules into the QSFP+

interfaces 15 to 16. Select cables suitable for the QSFP+

modules and connect them as described in the SFP modules

mounting instructions

www.lancom-systems.com/SFP-module-MI.



Supply the device with power via the power supply socket of the power supply module. Use the

supplied power cord or a country-specific LANCOM power cord.

To remove the power supply module, disconnect the module from the power supply and then pull

the plug out of the module. While pressing the release lever

 to the left, you can pull the module

out of the device by the handle

 .



To install an additional power supply module, remove the corresponding module bay cover by

loosening both associated screws and push the power supply module in as far as it will go until

the release lever  audibly engages. Check by pulling the handle

 that the module cannot be

removed from the bay without the release lever

 being pressed to the left.

LANCOM XS-5116QF

Hardware Quick Reference

Cloud-ready





 

 

 

 

 



 





 

 



 

 

 

 

 



 

 

 

 

 



 

 

 

 

 



 

 

 



 

 

 











 



















 