LC-Power ATX Case 7018B Manual

LC-Power Ikke kategoriseret ATX Case 7018B

Læs nedenfor 📖 manual på dansk for LC-Power ATX Case 7018B (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
ATX CASE
7018B
Thank you for purchasing this case from LC-Power.
Please read the manual carefully before usage.
Specifications may be subject to change without prior notice.
This product has a two year warranty period from the date of purchase, service issues will be handled by your dealer.
If the case is damaged due to improper operation, the warranty period expires immediately.
The case supports most SSDs/HDDs and mainboards. Incompatibility to a certain individual SSD/HDD/MB is not a reason
for repair or replacement.
We recommend parental guidance to children using the device, under strict observance to the security notes above.
Check www.lc-power.com or contact us by e-mail at support@lc-power.com.
Silent Power Electronics GmbH
Formerweg 8
47877 Willich
Germany
support@lc-power.com
www.lc-power.com
Remove the thumbscrews and slide out the side panels. Position the power supply unit on the bottom of the case and
fix it with screws.
Fan facing downwards:
Make sure thet there is enough space for air-intake between
the bottom of the case and the surface where the case is located.
Clean the dust filter regularly to ensure an adequate airflow!
Place the motherboard standoffs based on the manufacturer specs.
Fix the motherboard with screws.
NOTE: Not every motherboard is a standard one, please place the
standoffs according to your motherboard.
Unscrew the slot cover to remove them.
Install the add-in PCI card and secure it with screws.
Remove the front cover by pulling from the bottom and remove
the bay cover.
Mount in the external 5,25“ device into the chassis and fix the
ODD with screws.
Fix the 2,5“ HDDs/SSDs with screws from the back side of the chassis.
Insert the 3,5“ HDD into the HDD rack. 2,5“ HDDs/SSDs must be fixed with screws onto the rack.
Insert the HDD rack into its slot in the chassis.
Connect the HDD with the correct cables to the mainboard.


Produkt Specifikationer

Mærke: LC-Power
Kategori: Ikke kategoriseret
Model: ATX Case 7018B

Har du brug for hjælp?

Hvis du har brug for hjælp til LC-Power ATX Case 7018B stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret LC-Power Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MSW

MSW -RF15S Manual

25 December 2024
MSW

MSW -HFCV-A7 Manual

25 December 2024
MSW

MSW -HFCV-A5 Manual

25 December 2024
MSW

MSW -LRL2T-1 Manual

25 December 2024
MSW

MSW -HFCV-A6 Manual

25 December 2024
Philips

Philips SWF2620 Manual

25 December 2024
Philips

Philips 13BDL4150IW Manual

25 December 2024
Vivax

Vivax TS-950B Vintage Manual

24 December 2024