Lectrosonics LT/E01 Manual


Læs nedenfor 📖 manual på dansk for Lectrosonics LT/E01 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
LT
TECHNICAL DATA
Rio Rancho, NM, USA
www.lectrosonics.com
The LT transmitter oers a full set of professional
features in a compact, rugged package. The unit is
compatible with all Digital Hybrid Wireless
® receivers
and even some from other manufacturers, making it
comfortable in a wide variety of applications from video
production to theater, stage and house of worship.
The LT can be congured to operate as a “one touch”
device with a single power on/o switch on the top pan-
el, or with full access to all operational parameters using
the side panel membrane switches and LCD interface.
The top panel switch can also be congured to provide
a mute or function.talkback
Frequencies are selectable in 25 kHz or 100 kHz steps.
An IR port on the membrane panel enables automatic
setup when coupled with an IR enabled receiver. A USB
port on the side panel allows rmware updates to be
made easily.
The servo bias input accepts mic or line level signals
with a wide range of gain adjustment in 1 dB steps. A
menu selectable instrument level input is available on
the LCD. Accurate LED indications on the top panel and
a bar graph indicator on the LCD allow precise gain ad-
justments to be made for the maximum signal to noise
ratio and minimum distortion.
The limiter in the preamp can cleanly handle signal
peaks over 30 dB above full modulation, allowing the in-
put gain to be set high enough to achieve the maximum
signal to noise ratio with no risk of overload distortion.
The unit is powered by two AA batteries or an optional
battery eliminator that replaces the hinged battery door.
Wired or spring loaded belt clips are available.
The housing is machined from a solid aluminum billet,
nished with an ultra hard, black electroless nickel nish
called .ebENi
• Digital Hybrid Wireless® for compandor-free audio
• Selectable 50 or 100mW output power (varies per model - see
specifications)
• Compatibility modes for use with analog receivers
• 25 or 100 kHz tuning steps (varies per model)
• Integrated multi-function switch for mute or talkback modes
Wide range input gain control in 1 dB steps
• IR port for setup with IR enabled receivers
• USB port for firmware updates
• Menu selectable mic or instrument input
• Optional battery eliminator
Digital Hybrid Wireless® Belt-Pack Transmitter
LT, LT/E01, LT/E06, LT/X
Digital Hybrid Wireless® is a patented design that combines
24-bit digital audio with an analog FM radio link to provide
outstanding audio quality and the extended operating range
of the nest analog wireless systems.
The design overcomes channel noise in a dramatically dif-
ferent way, digitally encoding the audio in the transmitter
and decoding it in the receiver, yet still sending the encoded
information via an analog FM wireless link.
This proprietary algorithm is not a digital implementation of
an analog compandor. Instead, it is a technique which can
be accomplished only in the digital domain, even though the
audio inputs and outputs are analog signals.
*US Patent 7,225,135
WARNING: Moisture, including talent’s sweat,
will damage the transmitter. Wrap the LT in
a plastic baggie or other protection to avoid
damage, or see the LTCVR.


Produkt Specifikationer

Mærke: Lectrosonics
Kategori: Ikke kategoriseret
Model: LT/E01

Har du brug for hjælp?

Hvis du har brug for hjælp til Lectrosonics LT/E01 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Lectrosonics Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer