Lenovo R27i-30 Manual

Lenovo overvåge R27i-30

Læs nedenfor 📖 manual på dansk for Lenovo R27i-30 (2 sider) i kategorien overvåge. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany

Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com

SAFETY INFORMATION

1. Please read these instructions carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.

5. Use the equipment only in the intended manner and for the intended purpose.

6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain

that wall mounts are properly installed and secured. Make certain that the equipment is installed securely

and cannot fall down.

7. During installation, observe the applicable safety regulations for your country.

8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make

certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.

9. Never place sources of ignition, e.g., burning candles, on the equipment.

10. Ventilation slits must not be blocked.

11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment

- in this case, observe the special instructions noted below. Do not expose this equipment to flammable

materials, fluids or gases.

12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled

with liquids, such as vases or drinking vessels, on the equipment.

13. Make certain that objects cannot fall into the device.

14. Use this equipment only with the accessories recommended and intended by the manufacturer.

15. Do not open or modify this equipment.

16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to

tripping hazards.

17. During transport, make certain that the equipment cannot fall down and possibly cause property damage

and personal injuries.

18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or

if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is

a powered device). This equipment may only be repaired by authorized, qualified personnel.

19. Clean the equipment using a dry cloth.

20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate

plastic and paper/cardboard.

21. Plastic bags must be kept out of reach of children.

FOR EQUIPMENT THAT CONNECTS T O THE POWER MAINS:

22. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do

not switch it on immediately. Moisture and condensation could damage the equipment. Do not switch on

the equipment until it has reached room temperature.

23. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency

match the values specified on the equipment. If the equipment has a voltage selection switch, connect

the equipment to the power outlet only if the equipment values and the mains power values match. If the

included power cord or power adapter does not fit in your wall outlet, contact your electrician.

24. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at

the mains outlet and/or power adapter and the equipment connector.

25. When connecting the equipment, make certain that the power cord or power adapter is always freely

accessible. Always disconnect the equipment from the power supply if the equipment is not in use or if

you want to clean the equipment. Always unplug the power cord and power adapter from the power outlet

at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with

wet hands.

26. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this

can shorten the useful life of the equipment.

27. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter

from the power outlet.

28. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or

before extended periods of disuse.

CAUTION:

CAU T I O N

RIS K OF SELE CTRIC HOCK

DO N O NOT PE

Never remove the cover, because otherwise there may be a risk of electric shock. There are no user serviceable

parts inside. Have repairs carried out only by qualified service personnel.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to

the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electrical shock.

The exclamation mark within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance instructions.

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY

You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/

downloads/documents/manufacturersdeclarations.pdf

To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267

Neu Anspach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)

(Valid in the European Union and other European countries with waste separation)

This symbol on the product, or the documents accompanying the product, indicates that this appliance may not

be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled

waste disposal. Please dispose of this product separately from other waste and have it recycled to promote

sustainable economic activity.

FEATURES

Rated @ 250 V, 16 A

2 x IP54 outlets with flip lid covers

Black and yellow striped power I/O connectors

All-metal enclosure

2 x M10 inserts

INTRODUCTION

Designed for easy daisy chaining, the PROPORT 2T power strip provides 2 type F grounded outlets with individual flip

lid covers plus yellow and black striped power I/O connectors. Featuring a rugged all-metal enclosure and two female

thread M10 suspension points it is ideal for neat, custom power distribution on stages, trusses and in gear rigs.

SPECIFICATIONS

Model name: AHPROPORT2T

Product type: Power strips

Number of IP54 outlets: 2x Schuko folding cover as well as black and yellow power I/O

Operating voltage: 250 V

Max. current: 16 A

Power supply: 230 V

Cabinet material: Metal

Colour: black

Width: 208 mm

Height: 65 mm

Depth: 78 mm

Weight: 0.77 kg

Other features: 2x M10 inserts , gum-rubber cap

AHPROPORT2T

2-Outlet Power Strip

Attention: This product should only be installed and operated by qualiﬁed personnel.

Produkt Specifikationer

Mærke:	Lenovo
Kategori:	overvåge
Model:	R27i-30

Har du brug for hjælp?

Hvis du har brug for hjælp til Lenovo R27i-30 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

overvåge Lenovo Manualer

Lenovo G25-20 Manual

4 Oktober 2024

Lenovo ThinkCentre TIO Flex 24i Manual

1 Oktober 2024

Lenovo 10QXPAT1EU Manual

24 September 2024

Lenovo D22e-20 Manual

22 September 2024

Lenovo ThinkVision T1714 Manual

16 September 2024

Lenovo C27q-30 Manual

15 September 2024

Lenovo ThinkVision T24d-30 Manual

6 September 2024

Lenovo N27p Manual

6 September 2024

Lenovo Legion R27qc-30 Manual

6 September 2024

Lenovo L24m-4A Manual

6 September 2024

overvåge Manualer

Nyeste overvåge Manualer

Acer EB321HQUDbmidphx Manual

15 Oktober 2024

Bauhn APMTR-0624 Manual

15 Oktober 2024

Acer K272HUL Dbmidpx Manual

14 Oktober 2024

Hannspree Hanns.G HP 225 PJB Manual

13 Oktober 2024

13 Oktober 2024

12 Oktober 2024

10 Oktober 2024

10 Oktober 2024

9 Oktober 2024

7 Oktober 2024