LG LDFC2423V Manual

LG Opvaskemaskine LDFC2423V

Læs nedenfor 📖 manual på dansk for LG LDFC2423V (84 sider) i kategorien Opvaskemaskine. Denne guide var nyttig for 63 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/84

OWNER'S MANUAL

DISHWASHER

ENGLISH

LDFC242**

MFL69261741

Rev.00_012023

www.lg.com

Read this owner’s manual thoroughly before operating the appliance

and keep it handy for reference at all times. This abridged owner's

manual addresses user safety, precautions, and installation

information.

To view the complete owner's manual, you may:

1. Online manual: Visit the LG website at: http://gscs-manual.lge.com/

Total/HQ/GatewayPage/main.html or scan the QR code above; or

2. Printable PDF manual: Visit lg.com and search for your model

number; or

3. Call or write to customer service as provided in your Limited

Warranty.

Scan to see the online manual.

en-us_main.book.book Page 1 Friday, January 20, 2023 8:33 AM

TABLE OF CONTENTS

3 IMPORTANT SAFETY

INSTRUCTIONS

3 READ ALL INSTRUCTIONS BEFORE USE

3 WARNING STATEMENTS

6 CAUTION STATEMENTS

7 PRODUCT OVERVIEW

7 Product Features

9 INSTALLATION

9 Before Installing

10 Preparing Cabinet Opening

11 Preparing Water and Electrical Connections

12 Preparing Dishwasher

13 Sliding Dishwasher into Cabinet Opening

15 Connecting Water Supply Line and Power

17 Connecting the Drain Hose

18 Leveling Dishwasher

19 Securing Dishwasher in Cabinet Opening

20 Final Installation Check

22 OPERATION

22 Before Using

23 Control Panel

24 Wash Cycles

24 Options and Extra Functions

25 Loading the Dishwasher

26 Loading the Silverware Basket

26 Loading the Lower Rack

27 Loading the Upper Rack

27 Adding Cleaning Products

29 SMART FUNCTIONS

29 LG ThinQ Application

30 MAINTENANCE

30 Cleaning and Care

34 TROUBLESHOOTING

34 Before Calling for Service

36 LIMITED WARRANTY

36 USA

en-us_main.book.book Page 2 Friday, January 20, 2023 8:33 AM

3IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Safety Messages

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and

follow all safety messages.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,

and tell you what may happen if the instructions are not followed.

WARNING STATEMENTS

WARNING

• To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this

product, follow basic precautions, including the following:

Installation

• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.

• To reduce the risk of severe injury or death, follow all installation instructions.

• The appliance must be installed and electrically grounded by qualified service personnel in accordance

with local codes.

• Disconnect the power supply line, house fuse or circuit breaker before installing or servicing the

appliance.

• When moving or installing the product in a different location, call qualified service personnel for

installation and service.

• Keep packing materials out of the reach of children. Packaging material can be dangerous for children.

There is a risk of suffocation.

• Moving or installation of the appliance requires two or more people.

• This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or

aircraft.

• Store and install the appliance where it will not be exposed to temperatures below freezing or exposed

to outdoor weather conditions.

• This appliance must be positioned near to an electrical power supply.

• Do not, under any circumstances, cut or remove the ground from the power supply line.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages

will follow the safety alert symbol and either the word WARNING or CAUTION.

These words mean:

WARNING

You may be killed or seriously injured if you do not follow instructions.

CAUTION

You may be injured or cause damage to the product if you do not follow instructions.

en-us_main.book.book Page 3 Friday, January 20, 2023 8:33 AM

4IMPORTANT SAFETY INSTRUCTIONS

• When installing or moving the appliance, be careful not to pinch, crush, or damage the power supply

line.

• Do not install the appliance in humid spaces.

• Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children

might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight

chambers.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has

missing or broken parts, including a damaged power supply line.

• Adhere to all industry recommended safety procedures including the use of long-sleeved gloves and

safety glasses.

• The installer must ensure that th ed at the time of installation.e dishwasher is completely enclos

• Use new hoses when connecting the appliance to the water supply. Do not reuse old hoses.

• After installing, check the hose connection for leaks.

• Do not damage or place heavy items on the power supply line of the appliance.

Operation

• Repair or immediately replace all power supply lines that have become frayed or otherwise damaged. Do

not use a power supply line that shows cracks or abrasion damage along its length or at either end.

• If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug

it immediately, and contact an LG Electronics customer information center.

• Never unplug the appliance by pulling on the power supply line.

• Do not use an extension cable or adapter with this appliance.

• Do not grasp the power supply line or touch the appliance controls with wet hands.

• Do not modify or extend the power cable.

• If the product has been submerged, contact an LG Electronics customer information center for

instructions before resuming use.

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other

appliance.

• Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags,

etc.), gasoline, chemicals and other flammable vapors and liquids.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning the use of the appliance by a person responsible for their safety.

• If the electrical supply line is damaged, it must only be replaced by the manufacturer or its service agent

or a similar qualified person in order to avoid a hazard.

• Do not abuse, sit on, or stand on the door of the appliance.

• Read all instructions before using the appliance and save these instructions.

• Use this appliance only for its intended purpose.

• Do not allow children to play on, in or with the appliance. Close supervision of children is necessary when

the appliance is used near children.

• Do not tamper with controls.

• In the event of a gas leak (propane gas, LP gas, etc.) do not operate this or any other appliance. Open a

window or door to ventilate the area immediately.

• Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used

for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for

such a period, before using the appliance turn on all hot water faucets and let the water flow from each

for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not

smoke or use an open flame during this time.

en-us_main.book.book Page 4 Friday, January 20, 2023 8:33 AM

5IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• Fix the drain hose securely in place.

• Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the

reach of children.

• Do not let children eat detergent or dishwasher rinse agent.

• When loading items to be washed:

- Locate sharp items so that they are not likely to damage the door seal.

- Load sharp knives with the handles up to reduce the risk of cuts or other injuries.

• Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items

not so marked, check the manufacturer’s recommendations.

• Do not touch the HEATING ELEMENT during or immediately after use.

• Do not operate your dishwasher unless all ENCLOSURE panels are properly in place.

• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.

• Do not install or store the dishwasher where it will be exposed to weather conditions.

• After cleaning the dishes, turn off the water supply. Before cleaning, turn the water supply back on and

check the connections.

• Do not open the appliance door while it is operating. For safety reasons, the drain pump operates if the

door is opened, resulting in a longer cycle time.

• Be careful not to catch your hand when closing the door of the product.

• Do not plug the dishwasher into a damaged outlet.

• Do not install or keep the dishwasher near electrical components or exposed flames.

• Do not wash dishes exposed to gasoline, solvents or other flammable materials.

• When cleaning, do not spray water on the product directly.

• Do not press buttons with a sharp object such as an awl or pin.

• Do not use solvent-based detergent.

• Do not come into contact with the steam outlet.

• Small parts, such as rack clips and filter retaining posts can be a choke hazard to small children if

removed from the dishwasher. Keep out of reach of small children.

Maintenance

• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by

qualified service personnel unless specifically recommended in this Owner’s Manual. Use only

authorized factory parts.

• Do not disassemble or repair the appliance by yourself.

• Remove any dust or foreign matter from the power supply line.

• Disconnect this appliance from the power supply before cleaning and attempting any user maintenance.

Turning the controls to the OFF position does not disconnect this appliance from the power supply.

• Remove the door before the appliance is removed from service or discarded to avoid the danger of

children or small animals getting trapped inside.

• Unplug the appliance before cleaning to avoid the risk of electric shock.

• Before discarding the appliance, cut off the power supply line and destroy the appliance's control panel.

Grounding Instructions

• For a permanently connected dishwasher: This appliance must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding conductor must be run with the circuit

conductors and connected to the equipment-grounding terminal or lead to the appliance.

• Connect the ground wire to the green ground connector in the terminal box.

en-us_main.book.book Page 5 Friday, January 20, 2023 8:33 AM

6IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Tip Over Hazard

• Do not use the dishwasher until completely installed.

• Do not push down on the open dishwasher door.

• Failure to follow these instructions may result in serious injury or cuts.

CAUTION STATEMENTS

CAUTION

• To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or

property when using this product, follow basic precautions, including the following:

Installation

• Install the product on a firm and level floor.

• This dishwasher must be connected to a hot water supply with a temperature range between 120 °F (49

°C) and 149 °F (65 °C). This temperature range provides the best washing results and shortest cycle time.

The temperature should not exceed 149°F (65 °C) to prevent damage to dishes.

• Do not put the drain hose under the dishwasher during installation.

Operation

• Do not place objects on top of the appliance.

• Turn off the water faucets and unplug the appliance if the appliance is to be left for an extended period

of time, such as during vacations.

• Do not store or spill liquid detergents, cleaners, or bleaches (chlorine bleach, oxygen bleach) on the

appliance. Doing so may result in corrosion, discoloration or damage to the surface of the appliance.

• Do not touch draining water which may be hot.

• If the drain hose and the water supply hose are frozen in winter, defrost before using the appliance.

• Do not put hands, feet, or metal objects below or behind the appliance.

Maintenance

• If cooking oil is spilled on the exterior of the product, wipe it off immediately. Do not clean the exterior of

the product with cleaners which contain alcohol, thinners, bleach, benzene, flammable liquids, or

abrasives. These substances may discolor or damage the appliance.

en-us_main.book.book Page 6 Friday, January 20, 2023 8:33 AM

7PRODUCT OVERVIEW

ENGLISH

PRODUCT OVERVIEW

Product Features

The images in this guide may be different from the actual components and accessories, which are subject

to change by the manufacturer without prior notice for product improvement purposes.

NOTE

• For your safety and for extended product life, use only authorized components. The manufacturer is not

responsible for product malfunction or accidents caused by the use of separately purchased

unauthorized components or parts.

• Do not remove the safety cover at any time.

• To ensure reliability, each LG dishwasher goes through thorough quality control before it leaves the

factory.

• You may find water droplets or water spots from this process inside your new dishwasher.

Front View

aControl Panel & Door Handle

bFront Cover

cLower Cover

dLeveling Feet

eBase

fSafety Cover

gShipping Brace

Interior View

aTop Wash Impeller

bUpper Spray Arm

cLower Spray Arm

dFiltration System

eDetergent and Rinse Aid Dispenser

fDrying Vent Cover

gLower Rack

hSilverware Basket

iUpper Rack

en-us_main.book.book Page 7 Friday, January 20, 2023 8:33 AM

8 PRODUCT OVERVIEW

NOTE

• The silverware basket ships installed at the back

of the bottom rack. For best performance, install

it along the right side.

• Remove all packing materials from the exterior

and interior of the dishwasher before installing

the appliance.

• Press the tab to remove the cable tie by hand.

Cutting the tie with a knife or scissors may

damage the rack or the silverware basket.

Accessories

aInstallation Brackets (2 ea)

bWood Screws (4 ea)

cHose Clamp

Product Specifications

The appearance and specifications listed in this

manual may vary due to constant product

improvements.

Model LDFC242**

Electrical

Requirements

120 V, 60 Hz AC only,

15 A circuit breaker

Water Pressure 20 psi - 80 psi

(140 kPa - 550 kPa)

Dimensions

(Width X Depth X

Height)

23 3/4” X 24 5/8” X 33 5/8”

(603 mm X 625 mm X 854

mm)

Inlet Water

Temperature

120 ℉ - 149 ℉

(49 ℃ - 65 ℃)

Net Weight 66 lbs. - 75 lbs.

(30 kg - 34 kg)

abc

en-us_main.book.book Page 8 Friday, January 20, 2023 8:33 AM

9INSTALLATION

ENGLISH

INSTALLATION

Before Installing

Online Installation Guide

This QR code is for reference only. For complete

installation instructions, see the owner's manual

supplied with each dishwasher.

English

https://www.lg.com/us/support/video-tutorials/lg-

dishwasher-installation-CT10000009-

1366643457088

French

https://www.lg.com/ca_fr/soutien/aide-produit/

CT20100059-20152463332979

WARNING

• DISCLAIMER - This Guide is strictly confidential

and shall not be copied, disclosed, distributed,

disseminated, publicized or reproduced, in

whole or in part, without the prior written

authorization of LG Electronics.

The Guide may contain inaccuracies and/or

typographical errors and may be changed or

updated at any time by LGE without notice.

Parts not Provided

aElectrical Cable

• 16 AWG, with 2 conductors and 1 ground

bWater Supply Tube

• Minimum 3/8″ O.D. copper tubing or

stainless steel braided water supply line

cFittings for Tube

dCoupler

eElectrical Tape

fAir Gap

gWire Nuts for 16-Gauge Wiring

hHose Clamp

i3/8″ UL Approved Strain Relief

Tools Needed

a b c

d e f

ghi

a b c

d e f

ghi

k lj

en-us_main.book.book Page 9 Friday, January 20, 2023 8:33 AM

10 INSTALLATION

aFlat-Blade Screwdriver

bPhillips Screwdriver

cHole Saw min. 2 1/2” bit

dElectric Drill

eGloves

fSafety Glasses

gAdjustable Wrench

hTape Measure

iUtility Knife

jLevel

k1/4” Square Drive Wrench

lNipper

mPliers

nWire Stripper

oTubing Cutter

p3/8” Square Drive Wrench + 1/2” Socket

Installation Overview

Please read the following installation instructions

first after purchasing this dishwasher or

transporting it to another location.

aPreparing Cabinet Opening

bPreparing Water and Electrical Connections

cPreparing Dishwasher

dSliding Dishwasher into Cabinet Opening

eConnecting Water Supply Line and Power

fConnecting the Drain Hose

gLeveling Dishwasher

hSecuring Dishwasher in Cabinet Opening

iFinal Installation Check

Product Dimensions

Back View

Side View

For easiest installation, see marked areas a for

water and electrical clearances in base of

dishwasher. Water supply hose, drain hose and

electric cable should be passed through this area.

Preparing Cabinet Opening

This dishwasher is designed to fit a standard

dishwasher opening. An opening may be needed

on both sides to route plumbing and electrical

connections.

mno

p23 /4" (603 mm)

9 /8"

(238 mm)

3 4 / " 16

(119 mm)

5 4/ "

(134 mm)

4 / 2"

(115 mm)

33 /16"

(846 mm)

4 / 2"

(115 mm)

33 8/ "

(854 mm)

2 /16" (75 mm)

20 / " (512 mm) 16

24 /8" (625 mm)

4 4/ " (120 mm)

en-us_main.book.book Page 10 Friday, January 20, 2023 8:33 AM

11INSTALLATION

ENGLISH

• To ensure proper drainage, install the

dishwasher no more than 12 ft. (3.65 m) from

the sink.

• The location must have sufficient space for the

dishwasher door to open easily and provide at

least 0.1” (2 mm) between the dishwasher and

the cabinet sides.

• If installing the dishwasher in a corner, leave a

minimum of 2” (50 mm) between the dishwasher

and the adjacent wall.

• The adjacent wall must be free of obstructions.

• For flush installations only, you may remove the

cabinet brace a inside the cabinet.

Choosing the Proper Location

1 Select a location as close to the sink as

possible for easy connections to water supply

line, drain hose and electrical connection.

2 To allow for proper clearance of plumbing

and electrical, use the template included with

the literature to determine the clearance on

the side of the cabinet where the cabinet

meets the back wall. Using a 2 1/2” diameter

hole saw, drill a hole in the target area as

shown on the template.

WARNING

• Installation damage is not covered by the

warranty, and leaks caused by improper

installation may result in property damage.

• Do not use existing holes unless they are in the

target area.

• Failure to properly locate the hole for the water

and drain lines may prevent the dishwasher

from installing flush with the cabinets and could

result in kinked, pinched, crushed, stressed or

damaged lines.

Preparing Water and

Electrical Connections

WARNING

• Water Connection

- Do not reuse an old hose. Use only a new hose

when installing the dishwasher. The old hose

could leak or burst causing flooding and

property damage. Contact an LG Customer

Information Center for assistance in buying a

new hose.

• Electrical Connection

- Use a time-delay fuse or circuit breaker.

- Operate this appliance with the correct voltage

as shown in this manual and on the rating

plate.

- The wiring must be grounded properly. If in

doubt, have it checked by a qualified

electrician.

- Connect the appliance using 3-wires, including

a ground wire.

- The appliance and outlet must be positioned

so that the plug is easily accessible.

- Do not use an extension cable or adapter with

this dishwasher.

- Do not overload the outlet with more than one

appliance.

- The included 16AWG wire nuts should be used.

3.5

2.5

en-us_main.book.book Page 11 Friday, January 20, 2023 8:33 AM

12 INSTALLATION

WARNING

- It is the personal responsibility and obligation

of the product owner to have a proper outlet

installed by a qualified electrician.

CAUTION

• When connecting the dishwasher water supply

line to the house water supply, sealing tape or

compound should be used on pipe threads to

avoid leaks. Tape or compound should not be

used on compression fittings.

• Connect the dishwasher to a hot water supply

with a temperature range between 120 °F (49 ℃)

and 149 °F (65 ℃). This temperature range

provides the best washing results and shortest

cycle time. To prevent damage to dishes, the

temperature should not exceed 149 °F (65 ℃).

• Water supply pressure must be between 20 psi

and 80 psi (140–550 kPa). If the water supply

pressure exceeds 80 psi, a pressure reducing

valve must be installed. Otherwise premature

failure of the inlet valve may occur.

Routing Water Supply Line and

Electrical Wiring

There are 2 channels in the bottom of the

dishwasher for routing the water and electrical

connections.

• As shown in the bottom view below, channel a

is for the water supply line, and channel b is for

the electrical cable.

1 Turn off the house water supply and the

circuit breaker or dedicated power before

connecting the dishwasher.

2 Run the water supply line along the floor 6 1/

2" – 7 3/4" (165 mm – 197 mm) from the left

side of the opening and tape it in place in

front of the opening.

3 Run the electrical cable c along the floor 14"

– 16" (356 mm – 406 mm) from the water

supply line d and tape it in place.

• The electrical outlet must be within 4 ft.

(1.22 m) of either side of the dishwasher.

• The best location for the electrical conduit is

on the right side of the back wall. Re-route

the electrical cable before installation if the

electrical conduit pipe is longer than 3" (76

mm) and is centered on the back wall.

Preparing Dishwasher

WARNING

• Do not remove safety cover a. Removal can

result in fire, electric shock or death.

Releasing Drain Hose

Remove the twist tie holding the drain hose to the

back of the shipping brace.

en-us_main.book.book Page 12 Friday, January 20, 2023 8:33 AM

13INSTALLATION

ENGLISH

Removable Shipping Brace

The rear shipping brace can be removed if

additional clearance is needed when installing the

dishwasher under a low countertop.

Removing Lower Cover

CAUTION

• If you lay the dishwasher on its back, do so

carefully to avoid damaging the drain hose and

the tub.

1 Remove the screws at either side which attach

the lower cover to the dishwasher.

2 Remove the lower cover.

3 If there is insulation padding behind the lower

cover, remove it.

4 Set the parts aside until the installation is

complete.

Removing Packing Materials from

the Interior

Remove all packing materials from the interior of

the dishwasher before installing the appliance.

Attaching Installation Brackets

For countertops made of wood or other materials

that will not be damaged by drilling, use the metal

installation brackets provided.

For countertops made of granite, marble, or other

materials that could be damaged by drilling, use

the wood screws to attach the dishwasher to the

cabinet. See installation instructions in Securing

Dishwasher to Cabinet Opening.

NOTE

• Installation brackets and screws can be found in

the silverware basket.

1 Insert the tabbed end of the installation

brackets into the slots in the upper frame.

Rotate the brackets until the tabbed ends are

facing up.

2 Bend the tabs on the brackets to secure them

to the frame using a pair of needle nose

pliers.

Sliding Dishwasher into

Cabinet Opening

How to Slide Dishwasher

CAUTION

• Do not pull or lift the dishwasher using the

handle a. Doing so can damage the door and

hinges.

en-us_main.book.book Page 13 Friday, January 20, 2023 8:33 AM

14 INSTALLATION

CAUTION

• Do not push the door of the dishwasher with

knees when sliding the dishwasher into position.

Doing so can damage the front cover.

• Do not push the top of the dishwasher. Doing so

can damage the interior of the dishwasher.

NOTE

• Open the door and grab the body frame and the

top front opening b of the tub to move or lift the

dishwasher.

1 Align the dishwasher with the opening. Make

sure the water supply line and electrical cable

are in the correct positions to slide into their

channels properly.

2 Smooth out or pad the edges of the hole

drilled for the water supply to avoid damaging

the drain hose.

3 Make sure the drain hose is straight before

feeding the end of it through the hole for the

water supply. As you slide the dishwasher into

the opening, you will want to slowly pull on

the drain hose from inside the cabinet to take

up some slack. Be careful not to kink, pinch,

crush or stress the drain hose during

installation to avoid leaking and water

damage.

4 Gradually slide the dishwasher into the

opening, making sure that the water supply

line and electrical cable are passing freely

through the channels and do not get caught

under the dishwasher.

CAUTION

• To avoid malfunctions or leakage, it is important

that the drain hose not get kinked, pinched,

stressed or crushed behind or under the

dishwasher or inside the neighboring cabinet.

• Damage resulting from improper installation is

not covered under the warranty.

• As you slide the dishwasher into the

opening, stop periodically (or have an

assistant help) to take up the slack by

en-us_main.book.book Page 14 Friday, January 20, 2023 8:33 AM

15INSTALLATION

ENGLISH

pulling the drain hose farther into the

cabinet.

5 Remove the tape from the water supply line

and the electrical cable.

Connecting Water Supply

Line and Power

Connecting Water Supply Line

1 With the home water supply turned off,

connect the water supply line to the inlet valve

on the left front of the dishwasher.

CAUTION

• Tape or compound should not be used on

dishwasher inlet valve.

2 Tighten the compression nut.

3 Slide the water supply line back through the

channel, pulling gently from inside the

cabinet to make sure the line is not kinked,

pinched, stressed or crushed.

Connecting Power

The dishwasher should have a dedicated properly

grounded branch circuit to connect the 3 wire

setup which includes the ground wire.

If a 3-prong power supply is used, it should be in

an accessible location adjacent to the dishwasher

within 4 ft. (1.22 m) of the dishwasher side and not

behind the dishwasher.

NOTE

• The best location for the electrical conduit is on

the right side of the back wall. Re-route the

electrical cable before installation if the electrical

conduit pipe is longer than 3” (76 mm) and is

centered on the back wall.

1 Turn off electrical power to the unit at the

circuit breaker.

2 Use a Phillips screwdriver to remove the

screw from the junction box cover and

remove the cover.

3 Use a Phillips screwdriver to remove 2 screws

en-us_main.book.book Page 15 Friday, January 20, 2023 8:33 AM

16 INSTALLATION

4 Remove the junction box from the appliance.

5 Insert a 3/8” strain relief b through the hole

in the junction box. Tighten the ring nut c to

secure it in place.

6 Insert the electrical cable through the hole in

the strain relief. Tighten 2 screws to secure

the cable.

7 Pull the existing wires through the openings

in the junction box. Tighten 2 screws d to

reassemble the junction box in the appliance.

8 Pair the white, black, and green wires to the

matching colored wires from the dishwasher.

Then twist on the provided wire nuts e tightly

to connect the corresponding wires.

9 Wrap electrical tape f around each

connection.

10 Fold the connected wires back into the

junction box and screw on the junction box

cover.

WARNING

• Verify that the black wire is hot (120 V). If not, or

if you are unsure of the power supply, have it

checked by a licensed electrician.

CAUTION

• Do not leave stripped wire exposed. Trim

stripped wire to fit completely inside wire nuts.

en-us_main.book.book Page 16 Friday, January 20, 2023 8:33 AM

17INSTALLATION

ENGLISH

Connecting the Drain Hose

If the end of the drain hose does not fit the drain

line, use a heat and detergent resistant adapter

(not supplied). These may be obtained from a local

plumbing supply store.

• Cut the adapter so the end matches the size of

the drain connection.

NOTE

• For drain hose installation, use the screw style

hose clamp provided with this dishwasher in the

silverware basket.

• If connecting the dishwasher’s drain hose to the

garbage disposal, be sure to follow your

garbage disposal’s manual for proper

installation instructions.

Drain Hose Requirements

• Follow local codes and ordinances.

• Do not exceed 12 ft. (3.65 m) distance to drain.

• Do not connect drain hoses from other

appliances to the dishwasher’s drain hose.

• If an extension drain hose is required, use a 5/8"

or 7/8" inside diameter, 2-3 ft. length hose and a

coupler a for connecting the two hose ends.

Height of the Drain Hose

The height of the drain hose end must be at least

12" (305 mm) and within 40" (1016 mm) from the

base of the dishwasher to avoid water being

siphoned from the tub.

Connecting to Disposal without Air

Gap

1 Remove the knockout plug on the disposal

with a hammer and screwdriver.

2 Remove the knockout plug a from the

disposal.

CAUTION

• If the knockout plug has not been removed, the

dishwasher will not be able to drain properly.

3 Attach the drain hose to the disposal with the

hose clamp provided. Move the hose clamp

into position and tighten it with a flat-blade

screwdriver.

Connecting Waste Tee without Air

Gap

The height of the drain hose end must be at least

12” (305 mm) and within 40” (1016 mm) from the

base of the dishwasher to avoid water being

siphoned from the tub.

en-us_main.book.book Page 17 Friday, January 20, 2023 8:33 AM

18 INSTALLATION

1 Remove the knockout plug with a hammer

and screwdriver.

CAUTION

• If the knockout plug has not been removed, the

dishwasher will not be able to drain properly.

2 Attach the drain hose to the waste tee with

the hose clamp provided. Move the clamp into

position and tighten it with a flat-blade

screwdriver.

Connecting to Disposal or Waste

Tee with Air Gap

1 Remove the knockout plug with a hammer

and screwdriver.

2 Connect the end of the drain hose a to the air

gap b with the hose clamp provided. Move

the clamp into position and tighten it with a

flat-blade screwdriver.

• This avoids water being siphoned from the

tub.

3 If it is not connected, attach the rubber hose

connector to the disposal or waste tee with a

hose clamp (not provided).

Leveling Dishwasher

Check that the dishwasher is level and adjust the

leveling feet if necessary.

CAUTION

• Failure to level the dishwasher may result in

leakage, problems closing the door, or noise.

• Where the cabinet opening is narrower than

recommended (see Preparing Cabinet

Opening), the dishwasher must be carefully

leveled and aligned so that the dishwasher is

supported fully by the 3 leveling feet and is not

hanging from the installation brackets. Failure to

do so can result in leaks from the front of the

dishwasher, AE errors, difficulty in closing the

door, or failure to operate.

Checking Leveling

To check that the tub is level from front to back,

remove the lower rack and pour 169 oz. (5 L) of

water into the bottom of the tub. The water level

should be near the center of both tub lower

indentations at the front.

With the lower rack removed, place a level on the

inside wall of the tub to check that the dishwasher

is level from side to side.

• If you do not have a level, try using a

smartphone level application instead.

en-us_main.book.book Page 18 Friday, January 20, 2023 8:33 AM

19INSTALLATION

ENGLISH

Make sure that the gap between the tub walls and

the door liner is the same on either side.

Adjusting Leveling Feet

Adjust as needed until the dishwasher is

completely leveled.

• Adjust the front and rear leveling feet until they

are all in firm contact with the floor. Failure to

level the dishwasher may prevent the door from

closing properly and the dishwasher will not turn

on.

Adjusting Front Leveling Feet

Use a flat-blade screwdriver to turn the front

leveling feet and adjust the front of the tub.

• Turn the front leveling feet clockwise to raise the

front of the tub and counterclockwise to lower it.

• The adjustments work identically for both front

leveling feet.

• When a flat-blade screwdriver is unavailable, use

a 1/4" square drive wrench a or 3/8" square

drive wrench b with 1/2" socket c to turn the

front leveling feet and adjust the front of the tub.

Adjusting Rear Leveling Foot

Use a Phillips screwdriver to adjust the rear

leveling foot and the rear of the tub using the

center screw at the base of the appliance in the

front.

• Turn the center screw clockwise to raise the rear

of the tub and counterclockwise to lower it.

NOTE

• To avoid damaging the screw, do not use an

electric screwdriver.

Securing Dishwasher in

Cabinet Opening

There are 2 options for securing the dishwasher. If

the countertop is made of wood or a material that

can safely be drilled into, secure the dishwasher to

the countertop with the provided brackets. If the

countertop is granite, marble, or a material that

cannot be drilled into, secure the dishwasher to

the cabinet frame with the provided wood screws.

CAUTION

• Ensure the dishwasher is level and all leveling

feet are in firm contact with the floor before

attaching the dishwasher to the countertop or

cabinet. If the dishwasher is not leveled

properly, the door may not close properly or

water may leak.

NOTE

• Installation brackets and screws can be found in

the silverware basket.

• Use a magnetic screwdriver.

• Cover the filter hole with towels to prevent

screws from falling down into the pump.

en-us_main.book.book Page 19 Friday, January 20, 2023 8:33 AM

20 INSTALLATION

Securing Dishwasher to Countertop

Use the bracket screws provided to secure the

brackets at the top of the dishwasher to the

underside of the wood countertop.

Securing Dishwasher to Cabinet Frame

If desired, the dishwasher can also be secured to

the cabinet frame using the instructions which

follow.

1 Remove the 2 plastic caps from the mounting

bracket access holes.

2 Drive a wood screw through the mounting

bracket and into the cabinet frame.

3 Reinstall the plastic caps.

Final Installation Check

Testing the Dishwasher

Check if the dishwasher is properly installed.

1 Turn on the circuit breaker.

2 Turn on the house water supply.

3 Make sure that the door opens and closes

smoothly.

• If necessary, level the dishwasher again.

• If the door will not close, make sure the rack

is level.

• Make sure that all packaging materials have

been removed.

4 Power on the dishwasher and run a Turbo

cycle to verify proper operation.

5 Check for leaks at the drain hose and water

supply connection.

6 If a water leak is detected, press and hold the

Start button for 3 seconds to cancel the wash

cycle and automatically drain the water from

the dishwasher. Tighten all water connections

and run another cycle. Repeat until no leaks

are detected.

7 Replace the lower cover.

CAUTION

• Only install the lower cover provided with the

dishwasher. Do not install cabinet baseboard a

as it may cause noise and leakage.

8 Remove the protective film from the door, if

present. Leaving the film on may cause

discoloration or condensation on the door.

en-us_main.book.book Page 20 Friday, January 20, 2023 8:33 AM

21INSTALLATION

ENGLISH

Installation Check Error Codes

Refer to the chart below before calling for service.

Error Code Possible Cause and Solution

OE Drain hose is kinked or pinched.

• Feed the drain and water

supply hoses through the hole

under the sink. Then gradually

slide the dishwasher into the

cabinet while pulling on the

hoses under the sink to take up

any slack. This helps avoid

kinking the hoses or trapping

them beneath the dishwasher.

Drain hose is connected to the

disposal without removing the

knockout plug.

• Remove the knockout plug

from the disposal.

Waste tee or disposal is clogged.

• Remove knockout plug on the

waste tee or disposal.

IE Water supply line is kinked

under dishwasher.

• Feed the drain and water

supply hoses through the hole

under the sink. Then gradually

slide the dishwasher into the

cabinet while pulling on the

hoses under the sink to take up

any slack. This helps avoid

kinking the hoses or trapping

them beneath the dishwasher.

House water supply is not turned

on.

• Turn the water faucet on.

en-us_main.book.book Page 21 Friday, January 20, 2023 8:33 AM

22 OPERATION

OPERATION

Before Using

WARNING

• To reduce the risk of fire, electric shock, or injury to persons, read the before SAFETY INSTRUCTIONS

operating this appliance.

NOTE

• Connect to the hot water supply only. The water supply temperature should be a minimum of 120 °F (49

°C) for better washing performance and shorter cycle time.

• Follow the instructions for loading the dishwasher to ensure effective cleaning.

• Remove insoluble items such as bones, toothpicks, and pieces of paper while loading the dishwasher.

Quick Start

1) Load the dishes.

2) Add the detergent.

3) Turn on the dishwasher.

4) Check the rinse aid.

5) Select the cycle and options.

6) Operate the dishwasher.

•Method 1

- Press the Start button and then close the

door in less than four seconds to operate

the dishwasher. If the door is not closed

within four seconds, the white LED with

time flashes, an audible tone is heard, and

the cycle does not start.

•Method 2

- Close the door first and then press the

Start button to operate the dishwasher.

NOTE

• If the door is opened during the cycle, the

dishwasher will stop. To resume the cycle, see

methods 1 and 2 above.

• If the door is opened during the cycle and is not

closed within four seconds after selecting the

Start button, or if the door is closed without

pressing the Start button, the white LED with

time flashes, an audible tone is heard, and the

cycle does not start.

7) End of cycle.

• When the cycle is complete, a chime will

sound and the display will show ENd until the

door is opened or Power is pressed. To save

energy, press and hold Extra Dry and Night

Dry simultaneously for three seconds to set

the ENd display to automatically turn off a

few minutes after the cycle ends.

• It is normal for the dishwasher to chime

continuously if you open it during operation

or just after the cycle ends. The dishwasher

is letting you know that the interior

temperatures of the unit are hot and to use

caution when reaching inside. Once the unit

has cooled down, the chiming will stop.

For more details, refer to the online owner's

manual.

CAUTION

• Do not open the door during operation or

immediately after it has completed the wash

cycle as the escaping steam may cause scalding

as the door is opened.

Auto-Off

The dishwasher automatically turns off after four

minutes of inactivity if paused or if no cycle is

started.

en-us_main.book.book Page 22 Friday, January 20, 2023 8:33 AM

23OPERATION

ENGLISH

Control Panel

Control Panel Features

aPower On/Off Button

• Press this button to turn the washer on or off.

• If there is a power surge, power outage, or disruption of any kind, power is automatically turned off

for safety.

• When power is connected again, the dishwasher will turn on automatically and resume the cycle.

NOTE

• When opening or closing the product door, keep fingers and hands away from the control panel to avoid

activating buttons.

bDisplay

•Rinse Aid

- This LED illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse

aid is refilled or the level is set to 0.

- Refer to the Rinse Aid Dispenser Adjustment section.

•8:88 : Digital Display

- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and

options are selected, the display shows the total estimated time to complete those selections.

During operation, the display shows the remaining estimated operating time.

NOTE

• The estimated time shown on the display does not include delay times for heating water, etc.

• If Delay Start is selected, the display shows the delay time in hours.

• Cycle time may vary depending on the soil level of your load.

•Ctrl. Lock, CL : Control Lock

- The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this

feature locks all of the buttons, except for the Power button, on the control panel. This feature

does not lock the door.

- While a cycle is running, press and hold Flex Zone and High Temp. simultaneously for three

seconds to activate or deactivate Control Lock.

- To start a new cycle, deactivate Control Lock.

•Tub Clean

- The Tub Clean LED flashes every 30 cycles. To activate or deactivate the LED, press and hold the

Cycles and High Temp. buttons for three seconds.

- Select the Auto cycle and follow the instructions in the Maintenance section to clean the tub.

•Sanitized

- If the High Temp. option is added to a cycle, the Sanitized LED stays lit at the end of the cycle if the

heated rinse reached the proper temperature.

en-us_main.book.book Page 23 Friday, January 20, 2023 8:33 AM

24 OPERATION

cChime On/Off Button

• To activate or deactivate the button sounds, press and hold Cycles and Flex Zone simultaneously for

three seconds. The error alert sound cannot be turned off.

dTub Clean Reminder On/Off Button

• To activate or deactivate the Tub Clean Reminder, press and hold Cycles and High Temp.

simultaneously for three seconds. Please refer to the Tub Clean LED description under Display b.

eEnd Notification On/Off Button

• To activate or deactivate the End Notification, press and hold Extra Dry and Night Dry

simultaneously for three cation ON to display seconds. Turn the notifi ENd at the end of the cycle until

you press the POWER button or open the door. Turn the notification OFF to turn the machine off 30

seconds after the end of the cycle.

fCancel Button

• The drain pump activates and the cycle cancels. Once the dishwasher finishes draining, the power

turns off.

• Press and hold Start for three seconds to activate.

gStart Button

• To operate the machine, either press Start and close the door within four seconds or close the door

and press Start.

• If more than 4 seconds have passed since pressing Start, an alarm will sound when the door is

closed.

Wash Cycles

Select your desired cycle.

Selecting the Cycle

The default cycle is Auto. You can also customize

these settings using the Cycles button.

• Press the button repeatedly Cycles to select the

Normal, Heavy, or Turbo cycle.

Auto

This cycle senses the soil amount and soil

toughness and is optimized to achieve the best

cleaning.

Normal

This cycle is for daily, regular, or typical use to

completely wash a full load of normally soiled

dishes. The energy usage label is based on this

cycle without any options. Select the Night Dry

option if leaving dishes overnight.

• After the cycle ends, the fan runs for an hour to

help vent the warm, moist air in the tub. You can

stop the fan by opening the door after the cycle

ends.

Heavy

This cycle is for heavily soiled dishes and dishes

with hardened on soil. This cycle defaults to the

strongest spray intensity and uses it to wash

heavily soiled dishes.

Turbo

This cycle will clean heavily soiled dishes in an hour

using slightly more energy and water.

• This cycle does not have drying. Select the Extra

Dry and Night Dry option or another cycle for

better drying.

Options and Extra Functions

Select the desired cycle and then select the options

for that cycle.

Using the Flexible Zone

This option adjusts the wash intensity to target

different zones inside the dishwasher. Set it to

wash just the upper rack or lower rack, or set the

intensity to soft for the upper spray arm and

strong for the lower spray arm.

The Flex Zone is off by default. Press the Flex

Zone button to customize settings.

• Press the Flex Zone button repeatedly to select

the 4 modes for cleaning the dishes.

en-us_main.book.book Page 24 Friday, January 20, 2023 8:33 AM

25OPERATION

ENGLISH

High Temp.

Raises the main wash temperature to improve

cleaning.

If the High Temp. option is added to a cycle, the

Sanitized LED stays lit at the end of the cycle if the

heated rinse reached the proper temperature. If

the dishwasher could not properly use the heated

rinse because the High Temp. option was not

selected, the cycle was interrupted or the water

could not be heated to the required temperature,

the indicator will not light up at the end of the

cycle. Open and close the door or press POWER to

turn the indicator off.

Extra Dry

Select the Extra Dry option for better drying

performance. This option adds extra drying time to

the cycle and raises the heated rinse temperature.

• When the rinse aid is empty, the Extra Dry

option is selected automatically.

Night Dry

Dishes are often left in the dishwasher overnight

after the cycle ends. This can result in the steam

inside the tub condensing on dishes, leaving them

wet. This option runs the ventilation fan

periodically to help vent the steam from the tub.

• The Night Dry option is selected by default for

all cycles for which it is available, except the

Normal cycle.

Delay Start

This feature delays the start of a selected cycle.

Each time the Delay Start button is pressed, the

delay time increases by an hour. The delay time

can be set from 1 to 12 hours, in one-hour

increments.

Cycle/Option Guide

The cycle guide shows the available options for

each cycle.

To see the Cycle/Option Guide, refer to the online

owner's manual.

Loading the Dishwasher

The extra tall tub allows loading of dishes, pans, or

other utensils up to 14" high. For effective washing

performance, always follow these instructions.

• Remove large particles of food debris from

plates including bones before loading.

• Items with burnt on food should be soaked prior

to loading in the dishwasher.

• Deep pots or dishes should be placed upside

down.

• Make sure that all items do not touch each other.

Non-Dishwasher Safe Items

The combination of high water temperature and

dishwasher detergents may damage certain items.

Do not wash the following items in the dishwasher.

• Copper or anodized aluminum

• Hand painted silver or gold leaf china

• Wood or bone handled utensils

• Iron or non-rustproof utensils

• Plastic items which are not dishwasher safe

• Sterling silver or gold-plated flatware or delicate

or metal-rimmed china

• Fragile items such as crystal glasses

Mode Description

Small loads & light soil

• Use just the upper rack to save

energy and time.

Small loads & heavy soil

• Use just the lower rack to save

energy and time.

Small loads & heavy soil & light/sensitive

dishes

• Focus on lower rack, but also

operate lightly to wash some light

or sensitive dishes in the upper

rack.

Various conditions

• Place heavily soiled dishes like

plates and bowls in the lower rack

and lightly soiled dishes like cups

and small plates in the upper rack to

get the best results.

en-us_main.book.book Page 25 Friday, January 20, 2023 8:33 AM

26 OPERATION

CAUTION

• Do not place pots or pans with plastic handles in

the appliance as the handles may deteriorate

due to the heat and detergent.

• Waterproof or long-lasting lipstick smudges on

glasses may not be removed during the wash.

Loading the Silverware

Basket

The silverware basket has separators to avoid

scratching and tarnishing of delicate silverware.

Loading Silverware into the Basket

Loading 10 Place Settings

Loading 12 Place Settings

Silverware Loading Tips:

• For best cleaning results, use the top separators

in the basket when loading silverware. The

separators will prevent nesting of silverware.

• Load sharp items, such as knives, pointing down.

• When unloading the dishwasher, it is best to

start with the silverware basket. Doing so will

prevent water droplets from falling on your

silverware from the upper rack.

WARNING

• Be careful when loading and unloading sharp

items. Load sharp knives with the handles up to

reduce the risk of personal injury.

Loading the Lower Rack

Loading Dishes into the Lower Rack

Loading 10 Place Settings

Loading 12 Place Settings

Lower Rack Loading Tips:

For details, refer to the online owner's manual.

Folding Down the Lower Tines

Fold tines down to fit larger dishes; pull tines back

up to fit smaller dishes.

544

3 3 4 6 5 5

5 1

34 6 5

5 1

en-us_main.book.book Page 26 Friday, January 20, 2023 8:33 AM

27OPERATION

ENGLISH

For more details, refer to the online owner's

manual.

Loading the Upper Rack

Loading Dishes into the Upper Rack

Loading 10 Place Settings

Loading 12 Place Settings

Upper Rack Loading Tips:

For details, refer to the online owner's manual.

Folding Down the Upper Tines

Fold tines down to fit larger dishes; pull tines back

up to fit smaller dishes.

For more details, refer to the online owner's

manual.

Height Adjustable Upper Rack

The upper rack adjusts up and down. Raise the

upper rack to allow items up to 14" tall in the lower

rack. Lower the upper rack to allow dishes up to

12" tall in the upper rack. The dishwasher ships

with the upper rack raised.

For more details, refer to the online owner's

manual.

WARNING

• Before adjusting, ensure the rack is empty of all

dishes. Otherwise dishes may get damaged or

you may get injured.

Adding Cleaning Products

Adding Detergent to the Dispenser

• Remove the label on the dispenser prior to

running the dishwasher for the first time.

• The amount of detergent needed depends on

the cycle, load size, and soil level of dishes.

• Put detergent into the detergent compartment

before starting any cycle, except the Rinse cycle.

WARNING

• Dishwasher detergent and rinse aid contain

chemical components, like all other household

detergent. So, they must be kept out of the

reach of children.

CAUTION

• Use only detergent intended for dishwashers.

Incorrect detergent may cause the dishwasher

to fill with suds during operation. Excess suds

may reduce wash performance and may cause

the dishwasher to leak.

• To avoid damaging the dispenser, do not pull up

on the dispenser to close the dishwasher door.

For more details, refer to the online owner's

manual.

en-us_main.book.book Page 27 Friday, January 20, 2023 8:33 AM

28 OPERATION

Adding Rinse Aid to the Dispenser

The Rinse Aid LED appears in the display when

more rinse aid is needed.

The use of rinse aid is recommended to prevent

water spots on dishes and to enhance drying

performance.

For more details, refer to the online owner's

manual.

Rinse Aid Dispenser Adjustment

The dispenser has five adjustment levels. The

dishwasher is programmed at the factory for a

rinse aid dispenser level of 2. This can be checked

and adjusted from the control panel.

NOTE

• Adjust the setting higher if you have hard water

and notice calcium buildup on your dishes.

• Setting the rinse aid control too low will

contribute to spotting and streaking on dishes

and poor drying performance.

• Setting the control too high can cause foaming,

which will cause poor wash performance.

1 Ensure the appliance is off.

2 Press Power and Delay Start simultaneously

to check the current setting.

3 Press Delay Start to change the rinse aid

dispenser setting. Each press of the button

changes the setting one step from L0 to L4.

4 Once the desired rinse aid dispenser setting is

selected, press Start to save.

Refilling the Rinse Aid

How often the dispenser needs to be refilled

depends on how often dishes are washed and the

rinse aid setting used.

• The Rinse Aid LED flashes when more rinse aid

is needed, unless the rinse aid dispenser setting

is set to L0.

en-us_main.book.book Page 28 Friday, January 20, 2023 8:33 AM

29SMART FUNCTIONS

ENGLISH

SMART FUNCTIONS

LG ThinQ Application

The LG ThinQ application allows you to

communicate with the appliance using a

smartphone.

LG ThinQ Application Features

•Smart Diagnosis

- This function provides useful information for

diagnosing and solving issues with the

appliance based on the pattern of use. Select

Smart Diagnosis in the app and follow the

instructions. For additional information, refer

to the online owner's manual.

Installing the LG ThinQ Application

Search for the LG ThinQ application from the

Google Play Store or Apple App Store on a

smartphone. Follow instructions to download and

install the application.

en-us_main.book.book Page 29 Friday, January 20, 2023 8:33 AM

30 MAINTENANCE

MAINTENANCE

To maintain performance and prevent trouble, it is important to check the outside and inside of the

dishwasher, including filters and spray arms, at regular intervals.

WARNING

• When cleaning the outside and inside of the dishwasher, do not use benzene or thinner. Otherwise, it

may cause fire or explosion.

• To prevent injury during care an oves and/or protd maintenance or cleaning, wear gl ective clothing.

Cleaning and Care

Cleaning the Exterior

• Do not use scrub pads or abrasive cleaners on

the exterior of the dishwasher.

• Most soil can be removed using a soft, damp

cloth or sponge. A mild soap can be used to help

release stubborn soil. Rinse and wipe dry with a

soft cloth after cleaning.

• Stainless steel surfaces can be polished using a

stainless steel cleaner. Follow the instructions on

the cleaner, and wipe in the direction of the

grain.

CAUTION

• If cooking oil is spilled on the exterior of the

product, wipe it off immediately. Do not clean

the exterior of the product with cleaners which

contain alcohol, thinners, bleach, benzene,

flammable liquids, or abrasives. These

substances may discolor or damage the

appliance.

Cleaning the Interior

• Clean the interior of the dishwasher periodically

with a soft, damp cloth or sponge to remove

food and dirt particles.

• To remove white spots and odor from inside the

dishwasher, run an empty cycle, without

detergent, with one cup of white vinegar in a

dishwasher safe glass or bowl placed on the

upper rack. (Vinegar is an acid and with constant

use it could damage the appliance.)

• Cleaning the Tub

- Run the Auto cycle once a month or after

every 30 cycles to eliminate residual soil, odor,

white spots and other dirt inside the appliance.

1 Remove all dishes from the appliance.

2 Add 3 tbsp. (40 g) of citric acid to the

detergent dispenser or follow the

manufacturer’s instructions if using a

dishwasher cleaning agent. Do not use

dishwasher detergent.

3 Press Cycles to select the Auto cycle.

4 Press Start.

NOTE

• Run the Auto cycle once a month, or more often

if needed, to remove detergent buildup and

other residue.

• If you have not used the dishwasher for a long

time, refresh the inside by running the Auto

cycle without detergent. When the cycle is

finished, clean the inside and outside of the

dishwasher according to the MAINTENANCE

instructions.

Clogged Drain Air Gap or In-Sink

Disposal

Check the drain air gap or in-sink disposal if the

dishwasher is not draining well.

NOTE

• The drain air gap and disposal are external

plumbing devices that are not part of the

dishwasher.

• The warranty provided with the dishwasher does

not cover service costs directly associated with

the cleaning or repair of the external drain air

gap and disposal.

Cleaning the Air Gap

1 Turn off the dishwasher.

en-us_main.book.book Page 30 Friday, January 20, 2023 8:33 AM

31MAINTENANCE

ENGLISH

2 Remove the air gap cover and the plastic cap

underneath it.

3 Clean out any debris with a toothpick or

brush.

4 Replace the plastic cap and air gap cover.

Cleaning the Filters

WARNING

• Be cautious of sharp edges when handling the

stainless steel filter.

CAUTION

• Remove food residue caught in filters to prevent

the buildup of odor-causing bacteria and

possible drainage problems.

NOTE

• For best wash performance, clean the filter after

each load. If food debris remains in the filter, it

may cause an odor.

• In areas with hard water, clean the filter at least

once a month with a soft brush.

• Clean the filters using non-abrasive materials

and warm running water.

1 Remove the lower rack and position the

bottom spray arm so a wider vee is open to

the front.

2 Turn the inner filter counter-clockwise and

take out the assembled inner filter and

stainless steel filter.

With the filters removed, check the sump

opening and remove any foreign materials, if

needed.

3 Clean the filters with a soft brush under

running water. Reassemble the filters before

reinstalling them.

4 To replace the assembled filters, position the

spray arm so the wider vee is toward the

front. Fit the filters back into the filter holder

and secure them by turning the inner filter

clockwise until it clicks into place.

en-us_main.book.book Page 31 Friday, January 20, 2023 8:33 AM

32 MAINTENANCE

NOTE

• Make sure the filter is assembled correctly

before starting a cycle. When assembling, rotate

the filter firmly until it clicks.

Recommended Filter Cleaning

Schedule

Cleaning the Spray Arm

If the spray arm holes are blocked by any food

residue, dishes may not be cleaned well due to

improper water spray.

It is recommended that the spray arms be cleaned

once every two weeks.

Cleaning the Lower Spray Arm

1 Make sure that the water jet holes are not

blocked by food particles.

2 When cleaning is necessary, remove the lower

spray arm by pulling up.

3 Remove food particles by rinsing or shaking

the spray arm.

4 After cleaning the lower spray arm, replace it

by pushing down until it clips into place. Be

sure that the spray arm is able to turn freely.

Cleaning the Upper Spray Arm

1 Pull the upper rack forward. Make sure that

the water jet holes are not blocked by food

particles.

2 When cleaning is necessary, remove the

upper spray arm by turning the nut on the

bottom of the spray arm 1/8 turn counter-

clockwise and pulling down.

3 Remove food particles by rinsing or shaking

the spray arm.

4 If any food residue blocks the spray arm

holes, remove it with a pin or any sharp tool.

Number of

Loads Per

Week

If you wash

dishes before

If you scrape

and rinse

dishes before

1 - 3

Every 6 months

Once a year

4 - 7

8 - 12

Every 6 months

13 - 14

Number of

Loads Per

Week

If you only

scrape dishes

before

If you do not

scrape or

rinse dishes

before

1 - 3

Four times a

year

Once a month

4 - 7

Twice a

month(every

15 days)

8 - 12 Every 1.5

months

Every week

13 - 14 Twice a week

en-us_main.book.book Page 32 Friday, January 20, 2023 8:33 AM

33MAINTENANCE

ENGLISH

5 After removing the food residue, clean the

spray arms under running water.

6 After cleaning the upper spray arm, press it

up into place. Turn the nut 1/8 turn clockwise

to make sure that the nut locks back into

place.

7 After assembly, make sure that the spray

arms rotate freely.

Seasonal Maintenance and Storage

• If you will be absent for an extended period of

time during warmer months, close the water

valve and disconnect the power supply line, or

turn off the circuit breaker. Clean the filter, tub

and dispenser to prevent odor.

• If you will be absent for an extended period of

time during colder months and there is a

possibility of freezing temperatures, winterize

the water supply lines and the dishwasher itself.

Winterization must be performed by qualified

service personnel.

en-us_main.book.book Page 33 Friday, January 20, 2023 8:33 AM

34 TROUBLESHOOTING

TROUBLESHOOTING

The washer is equipped with an automatic error-monitoring system to detect and diagnose problems at an

early stage. If the washer does not function properly or does not function at all, check the following before

you call for service.

Before Calling for Service

For more troubleshooting, refer to the online owner's manual.

User Support Videos

For further assistance, there are videos and tutorials available through the LG.com website.

1 On the www.lg.com home page, click on the Support menu tab to bring up the menu selections.

Select Video Tutorials.

2 Select a product category and then pick a topic or search a keyword.

NOTE

• Scan this QR code to quickly access the video search page on the LG website.

Error Messages

Problem Possible Cause & Solution

IEIE Water inlet problem.

• Check for a clogged, kinked or frozen water inlet hose.

• Check water supply.

OEOE Drainage Problem.

• Check for a clogged, kinked or frozen water drain hose.

Air gap or disposal is clogged.

• Clean air gap or disposal.

Filters are clogged.

• Clean filters.

bEbE Oversudsing caused by improper detergent, such as liquid dish soap.

• Do not use hand dishwashing liquids. Only use detergents which are designed for use in

automatic dishwashers.

• A bE error can appear if dishes soiled with a lot of foamy food, such as whipped cream, are

loaded in the appliance. To clear the error, turn the appliance off and start a new cycle.

• To remove detergent residue in the tub, pour approximately 4 oz ~ 8 oz (100 ml ~ 200 ml)

of milk into a shallow bowl, place it in the upper rack and then run the appliance on the

Auto cycle.

en-us_main.book.book Page 34 Friday, January 20, 2023 8:33 AM

35TROUBLESHOOTING

ENGLISH

bEbE Failure to level dishwasher.

• Make sure that the appliance is properly leveled.

AEAE Water leakage

• Turn off the water supply to the dishwasher and call an LG Electronics Customer

Information Center at 1-800-243-0000 (U.S.A.) or 1-888-542-2623 (Canada).

• The dishwasher makes an alert sound for 10 seconds, and runs the drain pump

intermittently. If power is turned off to the machine, the machine powers back on

automatically until the AE error is resolved.

FEFE Excessive Water supplied.

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

HEHE Heater circuit failure.

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

tEtE Water temperature sensor error

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

LELE Wash motor error

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

NENE Vario motor error

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-

888-542-2623 (Canada).

N:N:#, U:

U:U: d:

d:d:#, #, t

tt#

(# is a number.)

Test mode is selected.

• This is not an error code. This code is used when testing the dishwasher. Power the unit off

and on and the code will disappear.

LOLO, L1

L1L1 Lz

LzLz L3

L3L3 L4

L4L4, , , Rinse aid level setting mode is selected.

• This is not an error code. This code indicates the current rinse aid level. For more

information, refer to the Adding Cleaning Products section.

CLCL Control Lock is activated.

• This is not an error code. This code indicates that the control lock is activated. Press and

hold Flex Zone and High Temp. buttons simultaneously for three seconds.

Problem Possible Cause & Solution

en-us_main.book.book Page 35 Friday, January 20, 2023 8:33 AM

36 LIMITED WARRANTY

LIMITED WARRANTY

USA

TERMS AND CONDITIONS

ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT

REQUIRES YOU AND LG ELECTRONICS (“LG”) TO RESOLVE DISPUTES BY BINDING ARBITRATION

INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND

JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING

DISPUTES” BELOW.

Should your LG Dishwasher (“Product”) fail due to a defect in materials or workmanship under normal and

proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product.

This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only

when purchased lawfully and used within the United States including U.S. Territories.

† Main control board is located on the bottom right of the dishwasher when viewed from the front.

• Replacement Products and parts are warranted for the remaining portion of the original warranty period

or ninety (90) days, whichever is greater.

• Replacement Products and parts may be new, reconditioned, refurbished, or otherwise factory

remanufactured.

• Replaced Product or part(s) will be the property of LG.

• Proof of original retail purchase specifying the Product model and date of purchase is required to obtain

warranty service under this limited warranty.

EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THE PRODUCT IS LIMITED IN

DURATION TO THE DURATION OF THE ABOVE LIMITED WARRANTY. UNDER NO CIRCUMSTANCES

SHALL LG OR ITS U.S. DISTRIBUTORS/DEALERS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,

CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST

GOODWILL, LOST REVENUES OR PROFITS, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, COST OF

REMOVAL AND REINSTALLATION OF THE PRODUCT, LOSS OF USE, OR ANY OTHER DAMAGES WHETHER

BASED IN CONTRACT, TORT, OR OTHERWISE. LG’S TOTAL LIABILITY, IF ANY, SHALL NOT EXCEED THE

PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE

EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU

SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

Warranty Period Scope of

Warranty HOW SERVICE IS HANDLED

One (1) year from date of original retail

purchase

Labor / Parts LG will also provide, free of charge, all

labor and on-site service to replace the

defective part.

Two (2) years from date of original retail

purchase

Main control

board†/ Racks /

Stainless Steel Door

Liner / Tub

Main control board, dishwasher racks,

stainless steel door liner, tub. Customer

will be responsible for any labor or in-

home service to replace defective parts.

Ten (10) years from date of original retail

purchase

Direct Drive Motor Direct Drive motor. Customer will be

responsible for any labor or in-home

service to replace defective parts.

en-us_main.book.book Page 36 Friday, January 20, 2023 8:33 AM

37LIMITED WARRANTY

ENGLISH

THIS LIMITED WARRANTY DOES NOT COVER:

• Service trips to deliver, pick up, or install, rrect wiring, or correct educate how to operate, co

unauthorized repairs.

• Damage or failure of the Product to perform during power failures and interrupted or inadequate

electrical service.

• Damage or failure of the Product caused by leaky or broken water pipes, frozen water pipes, restricted

drain lines, inadequate or interrupted water supply or inadequate supply of air.

• Damage or failure of the Product resulting from operating the Product in a corrosive atmosphere or

contrary to the Product owner’s manual.

• Damage or failure of the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, acts

of nature, or any other causes beyond the control of LG.

• Damage or failure of the Product caused by unauthorized modification or alteration, or if the Product is

used for other than the intended purpose, or any water leakage where the Product was not properly

installed.

• Damage or failure of the Product caused by incorrect electrical current, voltage, or plumbing codes.

• Damage or failure of the Product caused by transportation, storage, and/or handling, including

scratches, dents, chips, and/or other damage to the finish of the Product, unless such damage is

reported within one (1) week of delivery.

• Damage or failure of the Product resulting from misuse, abuse, improper installation, repair, or

maintenance. Improper repair includes the use of parts not authorized by LG. Improper installation or

maintenance includes installation or maintenance contrary to the Product owner’s manual.

• Damage or failure of the Product caused by the use of parts, components, accessories, consumable

cleaning products, or any other products or services that were not authorized by LG.

• Damage or missing items to any display or open box Product.

• Refurbished Product or any Product sold “As Is”, “Where Is”, “With all Faults”, or similar disclaimer.

• Products with original serial numbers that have been removed, altered, or cannot be readily determined.

• Increases in utility costs and additional utility expenses.

• Any noises associated with normal operation.

• Products used for other than normal and proper household use (e.g., commercial or industrial use) or

contrary to the Product owner’s manual.

• Costs associated with removal and reinstallation of the Product for repairs, or the removal and

reinstallation of the Product if it is installed in an inaccessible location or not installed in accordance with

the Product Owner's manual.

• Accessories, removable components, or consumable parts (e.g. Shelves, door bins, drawers, water/air

filters, racks, light bulbs, batteries, etc., as applicable), except for internal/functional parts covered under

this limited warranty.

The cost of repair or replacement under these excluded circumstances shall be borne by You.

TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION

Call 1-800-243-0000 and select the appropriate option from the menu.

Or visit our website at http://www.lg.com

Or by mail: LG Electronics Customer Service P.O. Box 240007 Huntsville, AL 35813 ATTN: CIC

PROCEDURE FOR RESOLVING DISPUTES:

ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED

WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND

NOT IN A COURT OF GENERAL JURI ANS THAT YOU AND LG ARE EACH SDICTION. BINDING ARBITRATION ME

WAIVING THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION.

Definitions. For the purposes of this section, references to “LG” mean LG Electronics U.S.A., Inc., its

parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries,

en-us_main.book.book Page 37 Friday, January 20, 2023 8:33 AM

38 LIMITED WARRANTY

predecessors in interest, successors, assigns and suppliers; references to “dispute” or “claim” shall include

any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute,

regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or

relating in any way to the sale, condition or performance of the product or this Limited Warranty.

Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify

LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG

Electronics, USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.

You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The

notice must provide your name, address, and telephone number; identify the product that is the subject of

the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to

resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.

Agreement to Binding Arbitration and Class Action Waiver. Upon failure to resolve the dispute during

the 30 day period after sending written notice to LG, you and LG agree to resolve any claims between us

only by binding arbitration on an individual basis, unless you opt out as provided below. Any dispute

between you and LG shall not be combined or consolidated with a dispute involving any other person’s or

entity’s product or claim. More specifically, without limitation of the foregoing, any dispute between you

and LG shall not under any circumstances proceed as pa tative action. Instead of rt of a class or represen

arbitration, either party may bring an individual action in small claims court, but that small claims court

action may not be brought on a class or representative basis.

Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written

demand for arbitration. The arbitration will be administered by the American Arbitration Association

(“AAA”) and will be conducted before a single arbitrator under the AAA’s Consumer Arbitration Rules that

are in effect at the time the arbi as the “AAA Rules”) and under the tration is initiated (referred to

procedures set forth in this section. The AAA Rules are available online at www.adr.org/consumer. Send a

copy of your written demand for arbitration, as well as a copy of this provision, to the AAA in the manner

described in the AAA Rules. You must also send a copy of your written demand to LG at LG Electronics,

USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632. If there is a

conflict between the AAA Rules and the rules set forth in this section, the rules set forth in this section will

govern. This arbitration provision is governed by the Federal Arbitration Act. Judgment may be entered on

the arbitrator’s award in any court of competent jurisdiction. All issues are for the arbitrator to decide,

except that issues relating to the scope and enforceability of the arbitration provision and to the

arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this

provision.

Governing Law. The law of the state of your residence shall govern this Limited Warranty and any

disputes between us except to the extent that such law is preempted by or inconsistent with applicable

federal law.

Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand

for arbitration, LG will promptly pay all arbitration filing fees to the AAA unless you seek more than $25,000

in damages, in which case the payment of these fees will be governed by the AAA Rules. Except as

otherwise provided for herein, LG will pay all AAA filing, administration and arbitrator fees for any

arbitration initiated in accordance with the AAA Rules and this arbitration provision. If you prevail in the

arbitration, LG will pay your attorney they are reasonable, by considering s’ fees and expenses as long as

factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the

foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an arbitrator

can award them to the same extent that a court would. If the arbitrator finds either the substance of your

claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by

the standards set forth in Federal Rule of Civil Procedure 11(b)), then the payment of all arbitration fees will

be governed by the AAA Rules. In such a situation, you agree to reimburse LG for all monies previously

disbursed by it that are otherwise your obligation to pay under the AAA Rules. Except as otherwise

provided for, LG waives any rights it may have to seek attorneys’ fees and expenses from you if LG prevails

in the arbitration.

Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration

conducted solely on the basis of (1) documents submitted to the arbitrator, (2) through a telephonic

hearing, or (3) by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000, the

right to a hearing will be determined by the AAA Rules. Any in-person arbitration hearings will be held at a

location within the federal judicial district in which you reside unless we both agree to another location or

we agree to a telephonic arbitration.

en-us_main.book.book Page 38 Friday, January 20, 2023 8:33 AM

39LIMITED WARRANTY

ENGLISH

Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can

require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no

later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by

either: (i) sending an e-mail to optout@lge.com, with the subject line: “Arbitration Opt Out” or (ii) calling 1-

800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and address;

(b) the date on which the product was purchased; (c) the product model name or model number; and (d)

the serial number (the serial number can be found (i) on the product; or (ii) online by accessing https://

www.lg.com/us/support/repair-service/schedule-repair-continued and clicking on “Find My Model & Serial

Number”).

You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail

or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure.

Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any

way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and

do not opt out, then you accept all terms and conditions of the arbitration provision described above.

Warranty Exceptions

Poor wash results caused by

debris remaining in the filter. Clean the filter regularly.

Poor wash results caused by

improper loading or over stacking:

wash arm won't rotate or soap

dispenser is held closed.

Make certain that no dishes or

utensils are in the path of the

spray arms.

Do not place one dish on top of

another.

Poor drying results caused by lack

of rinse aid.

Use rinse aid or combination

detergent.

Water is not supplied because the

water tap is not turned on.

IE error

Check and turn on the water tap.

Water is not supplied because the

inlet hose is kinked.

IE error

Reinstall the inlet hose.

Not draining because drain hose is

kinked.

OE error

Reinstall the drain hose.

The knockout plug in the garbage

disposal is not removed.

OE error

Remove the plug on the disposal.

en-us_main.book.book Page 39 Friday, January 20, 2023 8:33 AM

40 LIMITED WARRANTY

The disposal or air gap is blocked

by debris.

OE error

Clean the disposal or the air gap.

Inlet valve and drain hose

connection problem caused by

improper installation.

External leakage

Reinstall the hose.

Door movement or closing

compromised by incorrect

leveling.

Adjust the lower front leveling feet

to the required height.

No power due to loose connection

of power supply line or electrical

outlet problem.

Reconnect the power supply line

or repair the electrical outlet.

Pick-up, electrical wiring,

plumbing.

Installation

You will be charged for the

installation.

en-us_main.book.book Page 40 Friday, January 20, 2023 8:33 AM

MANUAL DEL PROPIETARIO

LAVAVAJILLAS

ESPAÑOL

LDFC242**

www.lg.com

Escanee el código QR para ver el manual.

Lea el manual del propietario detenidamente previo a operar el

electrodoméstico y mantengalo al alcance para futuras referencias.

Este manual del propietario abreviado aborda la seguridad del

usuario, las precauciones y la información de instalación.

Para ver el manual del propietario completo, puede

1. Manual en línea: visite el sitio web de LG en: http://gscs-manual.lge.

com/Total/HQ/GatewayPage/main.html o escanee el código QR que

se encuentra en la parte superior; o

2. Manual en PDF imprimible: Visite lg.com y busque su número de

modelo; o

3. Llame o escriba al servicio de atención al cliente según lo dispuesto

en su Garantía limitada.

es-us_main.book.book Page 1 Friday, January 20, 2023 8:45 AM

ÍNDICE

3 INSTRUCCIONES IMPORTANTES

DE SEGURIDAD

3 LEA TODAS LAS INSTRUCCIONES ANTES DE

UTILIZAR

3 MENSAJES DE ADVERTENCIA

6 MENSAJES DE PRECAUCIÓN

7 DESCRIPCIÓN GENERAL DEL

PRODUCTO

7 Características del producto

9 INSTALACIÓN

9 Antes de la instalación

11 Preparación de la abertura para el gabinete

12 Preparación de las conexiones eléctricas y de

agua

13 Preparación del lavavajillas

14 Deslizamiento del lavavajillas en la abertura

del gabinete

16 Conexión de la línea de suministro de agua y

energía eléctrica

17 Conexión de la manguera de desagüe

19 Nivelado del lavavajillas

21 Sujeción del lavavajillas en la abertura del

gabinete

21 Verificación final de la instalación

23 FUNCIONAMIENTO

23 Antes de usar

24 Panel de control

25 Ciclos de lavado

26 Opciones y funciones adicionales

27 Carga del lavavajillas

27 Carga en el cesto para cubiertos

28 Carga en la bandeja inferior

28 Carga en la bandeja superior

29 Agregado de productos de limpieza

31 FUNCIONES INTELIGENTES

31 Aplicación LG ThinQ

32 MANTENIMIENTO

32 Limpieza y cuidado

36 SOLUCIÓN DE PROBLEMAS

36 Antes de llamar al servicio técnico

38 GARANTÍA LIMITADA

38 EE. UU.

es-us_main.book.book Page 2 Friday, January 20, 2023 8:45 AM

3INSTRUCCIONES IMPORTANTES DE SEGURIDAD

ESPAÑOL

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

LEA TODAS LAS INSTRUCCIONES ANTES DE UTILIZAR

Mensajes de seguridad

Su seguridad y la de los demás son muy importantes.

Tanto en este manual como en el equipo, hemos proporcionado muchos mensajes de seguridad

importantes. Siempre debe leer y respetar todos los mensajes de seguridad.

Todos los mensajes de seguridad le indicarán cuáles son los peligros potenciales, cómo reducir la

posibilidad de lesiones y qué podría suceder si no sigue las instrucciones.

MENSAJES DE ADVERTENCIA

ADVERTENCIA

• Para disminuir el riesgo de explosiones, incendios, descargas eléctricas, quemaduras, lesiones o muerte

para las personas que usen este artefacto, siga las precauciones básicas, incluidas las siguientes:

Instalación

• Debe conectarse a un circuito de alimentación de clasificación y tamaño adecuados y debidamente

protegido para evitar la sobrecarga eléctrica.

• Para reducir el riesgo de lesiones graves o muerte, siga todas las instrucciones de instalación.

• El artefacto debe ser instalado y conectado a tierra por personal de servicio calificado, de acuerdo con

los códigos locales.

• Desconecte la línea de alimentación, el fusible del hogar o el interruptor de corriente antes de instalar o

reparar el artefacto.

• Cuando traslade o instale el producto en un lugar diferente, llame a personal de servicio calificado para

la instalación y el mantenimiento.

• Mantenga los materiales de empaque fuera del alcance de los niños. Los materiales de empaque

pueden ser peligrosos para los niños. Corren riesgo de asfixia.

• El traslado o la instalación del artefacto requieren de dos o más personas.

• Este artefacto no p43-ha sido diseñado para ser usado en embarcaciones o instalaciones móviles, tales como

casas rodantes, remolques o aeronaves.

• Almacene e instale el artefacto donde no esté expuesto a temperaturas bajo cero ni a la intemperie.

• Debe posicionar este artefacto cerca de una fuente de suministro eléctrico.

• En ninguna circunstancia debe cortar o quitar la tercera clavija (tierra) de la línea de alimentación.

Este es el símbolo de alerta de seguridad.

Este símbolo le advierte sobre posibles riesgos que pueden ocasionar lesiones o la muerte a usted o

a otros. El símbolo de alerta de seguridad siempre estará acompañado de las palabras

"ADVERTENCIA" o "PRECAUCIÓN" y seguido de un mensaje de seguridad importante.

Estos términos significan lo siguiente:

ADVERTENCIA

El incumplimiento de las instrucciones podría causarle la muerte o lesiones graves.

PRECAUCIÓN

El incumplimiento de las instrucciones podría causarle lesiones o daños al producto.

es-us_main.book.book Page 3 Friday, January 20, 2023 8:45 AM

4INSTRUCCIONES IMPORTANTES DE SEGURIDAD

• Cuando traslade o instale el aparato, tenga especial cuidado en no apretar, aplastar o dañar la línea de

alimentación.

• No instale el artefacto en lugares húmedos.

• Destruya el cartón, la bolsa de plástico y los demás materiales de empaque luego de desempacar el

artefacto. Estos materiales podrían utilizarlos los niños para jugar. Las cajas de cartón cubiertas con

tapetes, colchas o láminas plásticas pueden convertirse en cámaras herméticas.

• Nunca intente operar este artefacto si se encuentra dañado, si no funciona correctamente, si no está

ensamblado por completo o si tiene piezas faltantes o rotas, incluido una línea de alimentación dañada.

• Cumpla con todos los procedimientos de seguridad del sector recomendados, incluido el uso de guantes

de manga larga y gafas de seguridad.

• El instalador debe asegurarse de que el lavavajillas esté completamente cerrado al momento de la

instalación.

• Use mangueras nuevas cuando conecte el aparato al suministro de agua. No reutilice mangueras viejas.

• Después de instalar el lavavajillas, verifique que no haya fugas en la conexión de la manguera.

• No dañe la línea de alimentación del artefacto ni coloque objetos pesados sobre él.

FUNCIONAMIENTO

• Repare o reemplace de inmediato todas las líneas de alimentación deshilachados o dañados de otra

forma. No use un cable que exhiba roturas o abrasión en su longitud o en sus extremos.

• Si detecta un sonido extraño, olor a quemado o a químico, o humo provenientes del artefacto,

desconéctelo de inmediato y contáctese con un Centro de Información al Cliente de LG Electronics.

• Nunca desconecte el artefacto tirando de la línea de alimentación.

• No use un cable de extensión ni un adaptador con este artefacto.

• No sujete la línea de alimentación ni toque los controles del artefacto con las manos húmedas.

• No modifique ni extienda el cable de alimentación.

• Si el producto se ha mojado accidentalmente, comuníquese con el Centro de Información al Cliente de

LG Electronics para que le den instrucciones antes de reanudar el uso.

• No almacene ni use gasolina u otros líquidos o vapores inflamables cerca de este artefacto ni de ningún

otro.

• Mantenga el área debajo de los artefactos y sus alrededores libre de materiales combustibles (pelusa,

papel, trapos, etc.), gasolina, productos químicos y otros vapores o líquidos inflamables.

• Este artefacto no ha sido diseñado para ser utilizado por personas con capacidades físicas, sensoriales o

mentales disminuidas (incluidos niños) o que no cuenten con la experiencia o los conocimientos

necesarios para operarlo, salvo que una persona responsable de su seguridad les brinde la supervisión o

la instrucción pertinente en cuanto al uso del artefacto.

• Si se daña la línea de alimentación eléctrica, solo el fabricante está autorizado para reemplazarlo, o bien

su agente de servicio técnico o una persona de calificación similar para prevenir riesgos.

• No maltrate la puerta, no se siente ni se pare sobre ella.

• Lea todas las instrucciones antes de usar el artefacto y consérvelas.

• Use el artefacto únicamente para el fin previsto.

• No permita que los niños jueguen con el artefacto. Es necesario supervisar atentamente a los niños

cuando el artefacto esté en funcionamiento cerca de ellos.

• No utilice indebidamente los controles.

• En el caso de que se produzca una fuga de gas (gas propano, gas licuado de petróleo, etc.), no ponga en

funcionamiento este artefacto ni ningún otro. Abra una puerta o una ventana para ventilar el área de

inmediato.

• Bajo ciertas condiciones, podría producirse gas hidrógeno en un sistema de agua caliente que no ha sido

utilizado por dos semanas o más. EL GAS HIDRÓGENO ES EXPLOSIVO. Si el sistema de agua caliente no

se ha usado durante ese período de tiempo, abra todas las llaves de agua caliente y deje que fluya varios

es-us_main.book.book Page 4 Friday, January 20, 2023 8:45 AM

5INSTRUCCIONES IMPORTANTES DE SEGURIDAD

ESPAÑOL

minutos antes de usar el artefacto. Esto eliminará el gas hidrógeno acumulado. Dado que el gas

hidrógeno es inflamable, no fume ni use ninguna llama abierta durante este proceso.

• Fije la manguera de desagüe en su sitio de manera segura.

• Solo use detergentes y agentes de enjuague recomendados para lavavajillas. Mantenga dichos

productos fuera del alcance de los niños.

• No permita que los niños ingieran detergente o agentes de enjuague para vajilla.

• Cuando cargue objetos para su lavado:

- Cargue los objetos cortantes de tal forma que no dañen el sello de la puerta.

- Cargue los cuchillos filosos con el mango hacia arriba para disminuir el riesgo de heridas cortantes u

otras lesiones.

• No lave artículos de plástico a menos que contengan la indicación de que son "seguros para lavar con

lavavajillas" o una indicación equivalente. Para los artículos de plástico que no contengan tal indicación,

consulte las recomendaciones del fabricante.

• No toque el ELEMENTO CALENTADOR durante el uso o inmediatamente después.

• No ponga en funcionamiento el lavavajillas a menos que todos los paneles del CERRAMIENTO estén en el

lugar adecuado.

• No maltrate la puerta o las bandejas del lavavajillas, no se siente ni se pare sobre ellas.

• No instale ni almacene el lavavajillas en lugares expuestos a la intemperie.

• Después de limpiar la vajilla, cierre el suministro de agua. Antes de limpiar, vuelva a abrir el suministro

de agua y revise el estado de las conexiones.

• No abra la puerta del artefacto durante la operación. Por motivos de seguridad, la bomba de purga

opera si la puerta está abierta, lo que de ciclo más largo.genera un tiempo

• Tenga cuidado de no apretarse la mano al cerrar la puerta.

• No enchufe el lavavajillas en un tomacorriente dañado.

• No instale ni coloque el lavavajillas cerca de componentes eléctricos o llamas expuestas.

• No lave vajilla que haya estado expuesta a gasolina, solventes u otros materiales inflamables.

• Al limpiar, no rocíe agua directamente sobre el producto.

• No presione los botones con objetos punzantes o filosos como un alfiler o un punzón.

• No utilice detergente con base solvente.

• No haga contacto con la salida de vapor.

• Si se extraen del lavavajillas, las piezas pequeñas como los ganchos de las bandejas y los postes de

retención del filtro pueden presentar riesgo de asfixia para niños pequeños. Mantenga dichas piezas

fuera del alcance de los niños.

Mantenimiento

• No repare ni reemplace ninguna pieza del artefacto. Todas las reparaciones y el servicio de

mantenimiento deben ser realizados por un miembro del personal de servicio calificado, a menos que se

recomiende lo contrario en este Manual del propietario. Use solamente piezas de fábrica autorizadas.

• No desarme ni repare el artefacto por su cuenta.

• Quite el polvo o los materiales extraños de las clavijas de la línea de alimentación.

• Desconecte el artefacto del suministro eléctrico antes de limpiarlo o de realizar cualquier tipo de

mantenimiento que pueda realizar el usuario. Colocar los controles en la posición de apagado no

desconecta el artefacto del suministro eléctrico.

• Quite la puerta antes de sacar de servicio o desechar el artefacto para evitar el riesgo de que niños o

animales pequeños queden atrapados adentro.

• Desconecte el artefacto antes de limpiar para descargas eléctricas. evitar el riesgo de

• Antes de desechar el producto, corte la línea de alimentación y destruya el panel de control del producto.

es-us_main.book.book Page 5 Friday, January 20, 2023 8:45 AM

6INSTRUCCIONES IMPORTANTES DE SEGURIDAD

GUARDE ESTAS INSTRUCCIONES

Instrucciones de conexión a tierra

• Para conectar el lavavajillas de modo permanente: Este artefacto debe estar conectado a un sistema

permanente de cableado de metal con descarga a tierra, o bien debe instalarse un conductor de puesta

a tierra del equipo con los conductores de circuito y conectarse a un terminal de puesta a tierra del

equipo o a un extremo del dispositivo.

• Conecte el cable a tierra al conector a tierra de color verde en la caja de conexiones eléctricas.

Riesgo de vuelco

• No use el lavavajillas hasta que esté instalado por completo.

• No empuje hacia abajo la puerta del lavavajillas cuando esté abierta.

• El incumplimiento de estas instrucciones podría causar heridas o cortes graves.

MENSAJES DE PRECAUCIÓN

PRECAUCIÓN

• Para reducir el riesgo de lesiones leves o moderadas a personas, el mal funcionamiento o daño al

producto o propiedad cuando use este producto, siga las precauciones básicas, incluidas las siguientes:

Instalación

• Instale el producto sobre un piso firme y nivelado.

• El lavavajillas debe estar conectado a un suministro de agua caliente con un rango de temperatura entre

120 °F (49 °C) y 149 °F (65 °C). Este rango de temperatura brinda los mejores resultados de lavado y el

ciclo más corto. La temperatura no debe superar los 149 °F (65 °C) para evitar dañar la vajilla.

• No coloque la manguera de desagüe debajo del lavavajillas durante la instalación.

FUNCIONAMIENTO

• No coloque ningún objeto encima del artefacto.

• Cierre las llaves de agua y desconecte el artefacto si este no será usado por un periodo de tiempo

prolongado, por ejemplo, durante las vacaciones.

• No almacene ni vierta limpiadores, blanqueadores (blanqueador con cloro, blanqueador oxigenado, etc.)

ni detergentes líquidos encima del artefacto. Si lo hace, podría ocasionar corrosión, decoloración o daño

de la superficie del artefacto.

• No toque el agua de desagüe, ya que podría estar caliente.

• Si la manguera de desagüe y la manguera de suministro de agua se congelan en invierno, descongélelas

antes de usar el artefacto.

• No coloque las manos, pies u objetos metálicos debajo ni detrás del artefacto.

Mantenimiento

• En caso de derramar aceite de cocina en el exterior del producto, límpielo de inmediato. No limpie el

exterior del producto con productos de limpieza que contengan alcohol, diluyentes, blanqueadores,

benceno, líquidos inflamables o abrasivos. Estas sustancias pueden decolorar o dañar el

electrodoméstico.

es-us_main.book.book Page 6 Friday, January 20, 2023 8:45 AM

7DESCRIPCIÓN GENERAL DEL PRODUCTO

ESPAÑOL

DESCRIPCIÓN GENERAL DEL PRODUCTO

Características del producto

Las ilustraciones en esta guía pueden diferir de los componentes y accesorios reales, los cuales están

sujetos a cambios sin previo aviso por parte del fabricante a fin de introducir mejoras en el producto.

NOTA

• Para su seguridad y para prolongar la vida útil del producto, use solo componentes autorizados. El

fabricante no se hace responsable del mal funcionamiento del producto o de accidentes provocados por

el uso de componentes o piezas no autorizados adquiridos por separado.

• No retire la cubierta de seguridad en ningún momento.

• Para garantizar la fiabilidat, cada lavavajillas se somete a un extenso control de calidad antes de salir de

fábrica.

• Puede encontrar gotas de agua o manchas de agua como resultado de este proceso en su nuevo

lavavajillas.

Vista frontal

aPanel de control y manija de la puerta

bCubierta frontal

cCubierta inferior

dPatas de nivelación

eBase

fCubierta de seguridad

gSoporte de embalaje

Vista interior

aRotor superior de lavado

bBrazo rociador superior

cBrazo rociador inferior

dSistema de filtrado

eDispensador de detergente y abrillantador

fCubierta de ventilación de secado

gBandeja inferior

hCesto para cubiertos

iBandeja superior

es-us_main.book.book Page 7 Friday, January 20, 2023 8:45 AM

8DESCRIPCIÓN GENERAL DEL PRODUCTO

NOTA

• El cesto para cubiertos se envía instalado en la

parte posterior de la bandeja del fondo. Para

obtener un mejor desempeño, instálelo a lo

largo del lado derecho.

• Retire todos los materiales de empaque del

exterior y el interior del lavavajillas antes de

instalar el artefacto.

• Presione la lengüeta para quitar la atadura del

cable con la mano. Cortar la atadura con un

cuchillo o tijeras puede dañar el estante o la

canasta de cubiertos.

Accesorios

aSoportes de instalación (2 c/u)

bTornillos de madera (4 c/u)

cAbrazadera para manguera

Especificaciones del producto

La apariencia y las especificaciones detalladas en

este manual podrían variar debido a mejoras

constantes en el producto.

Modelo LDFC242**

Requisitos

eléctricos

120 V~ CA, 60 Hz solo,

interruptor de corriente de

15 A

Presión de agua 20 psi - 80 psi

(140 kPa - 550 kPa)

Dimensiones

(Ancho X

Profundidad X

Altura)

23 3/4” X 24 5/8” X 33 5/8”

(603 mm X 625 mm X 854

mm)

a b c

Temperatura de

entrada

del agua

120 ℉ - 149 ℉

(49 ℃ - 65 ℃)

Peso neto 66 lbs. - 75 lbs.

(30 kg - 34 kg)

Modelo LDFC242**

es-us_main.book.book Page 8 Friday, January 20, 2023 8:45 AM

10 INSTALACIÓN

aDestornillador de hoja plana

bDestornillador Phillips

cBroca con sierra de perforación de 2 1/2” mín.

dTaladro eléctrico

eGuantes

fGafas de seguridad

gLlave ajustable

hCinta medidora

iCuchilla

jNivel

kLlave con accionamiento cuadrado de 1/4”

lTenazas

mPinzas

nPelacables

oCortador de tubería

pLlave con accionamiento cuadrado de 3/8” y

casquillo de 1/2”

Descripción general de la

instalación

Lea las siguientes instrucciones de instalación

inmediatamente después de adquirir el lavavajillas

o transportarlo a otra ubicación.

aPreparación de la abertura para el gabinete

bPreparación de las conexiones eléctricas y de

agua

cPreparación del lavavajillas

dDeslizamiento del lavavajillas en la abertura del

gabinete

eConexión de la línea de suministro de agua y

energía eléctrica

fConexión de la manguera de desagüe

gNivelado del lavavajillas

hSujeción del lavavajillas en la abertura del

gabinete

iVerificación final de la instalación

Dimensiones del producto

Vista posterior

Vista lateral

Para una instalación más sencilla, observe las

áreas marcadas con a para los espacios libres

correspondientes a la línea eléctrica y la línea de

suministro de agua en la base del lavavajillas. La

manguera de suministro de agua, la manguera de

mno

23 /4" (603 mm)

9 /8"

(238 mm)

3 4 / " 16

(119 mm)

5 4/ "

(134 mm)

4 / 2"

(115 mm)

es-us_main.book.book Page 10 Friday, January 20, 2023 8:45 AM

11INSTALACIÓN

ESPAÑOL

desagüe y el cable eléctrico deben pasar a través

de esta área.

Preparación de la abertura

para el gabinete

Este lavavajillas está diseñado para ajustarse a una

abertura estándar para lavavajillas. Es posible que

sea necesario hacer una abertura en ambos lados

para pasar las conexiones de fontanería y

eléctricas.

• Para asegurar un desagüe adecuado, el

lavavajillas no se debe instalar a más de 12 pies

(3.65 m) de distancia del fregadero.

• La ubicación debe tener espacio suficiente para

que la puerta del lavavajillas se abra fácilmente y

debe dejarse una distancia de, al menos, 0.1” (2

mm) entre el lavavajillas y los lados del gabinete.

• Si instala el lavavajillas en un rincón, deje un

mínimo de 2” (50 mm) entre el lavavajillas y el

muro adyacente.

• El muro adyacente debe estar libre de

obstáculos.

• Solamente para instalaciones al ras: puede

retirar el soporte del gabinete a del interior del

gabinete.

Elección de la ubicación adecuada

1 Seleccione una ubicación tan cercana al

fregadero como sea posible para facilitar la

conexión de la línea de suministro de agua, la

manguera de desagüe y la conexión eléctrica.

2 Para dejar el espacio adecuado para tareas de

fontanería y electricidad, use la plantilla

incluida con el material impreso para

determinar el espacio libre del lado del

gabinete donde el lavavajillas hace contacto

con el muro posterior. Con una sierra de

perforación de 2 1/2” de diámetro, haga un

agujero en el área objetivo según se muestra

en la plantilla.

ADVERTENCIA

• El daño durante la instalación no está cubierto

por la garantía, y las fugas causadas por la

instalación inadecuada podrían dañar la

propiedad.

• No use los orificios existentes, a menos que se

encuentren en el área objetivo.

• Si no se realiza la perforación para las líneas de

agua y desagüe en las ubicaciones adecuadas,

esto podría impedir que el lavavajillas quede al

ras de los gabinetes y podría plegar, aplastar,

tensionar o dañar las líneas.

33 /16"

(846 mm)

4 / 2"

(115 mm)

33 8/ "

(854 mm)

2 /16" (75 mm)

20 / " (512 mm) 16

24 /8" (625 mm)

4 4/ " (120 mm)

3.5

2.5

es-us_main.book.book Page 11 Friday, January 20, 2023 8:45 AM

12 INSTALACIÓN

Preparación de las

conexiones eléctricas y de

agua

ADVERTENCIA

• Conexión de agua

- No reutilice una manguera vieja. Emplee solo

una manguera nueva cuando instale el

lavavajillas. La manguera vieja podría

presentar fugas o explotar, causando

inundaciones y daños a la propiedad. Póngase

en contacto con un Centro de información al

cliente de LG para obtener ayuda en la compra

de una nueva manguera.

• Conexión eléctrica

- Utilice un interruptor de corriente o fusible de

acción retardada.

- Este artefacto debe operarse con el voltaje

correcto, que se indica en este manual y en la

placa de datos técnicos.

- El cableado debe tener una conexión a tierra

adecuada. Si tiene dudas, solicite que lo

verifique un electricista calificado.

- Conecte el artefacto con una conexión de 3

cables, incluido un cable de conexión a tierra.

- El artefacto y el tomacorriente deben

colocarse de manera que el enchufe sea de

fácil acceso.

- No use un cable de extensión ni un adaptador

con este lavavajillas.

- No sobrecargue el tomacorriente con más de

un artefacto.

- Deben utilizarse las tuercas para cable 16AWG

que se incluyen.

- Es obligación y responsabilidad personal del

propietario del producto que un electricista

calificado instale un tomacorriente adecuado.

PRECAUCIÓN

• Cuando conecte la línea de suministro de agua

del lavavajillas al suministro de agua de la

vivienda, se debe usar cinta o compuesto de

sellado en las roscas de la tubería para evitar

fugas. No se debe emplear cinta ni compuesto

en los accesorios de compresión.

• Conecte el lavavajillas a un suministro de agua

caliente con un rango de temperatura entre

120 °F (49 °C) y 149 °F (65 °C). Este rango de

temperatura brinda los mejores resultados de

lavado y el ciclo más corto. Para evitar daños en

la vajilla, la temperatura no debe superar los

149 °F (65 °C).

• La presión del suministro de agua debe ser de

entre 20 psi y 80 psi (de 140 a 550 kPa). Si la

presión del suministro de agua es mayor a 80

psi, debe instalarse una válvula reductora de

presión, de manera que se evite el fallo

prematuro de la válvula de entrada.

Cómo pasar la línea de suministro

de agua y el cableado eléctrico

Hay 2 canales en la base del lavavajillas para pasar

la conexión de agua y la conexión eléctrica.

• Como se muestra en la vista inferior debajo, el

canal a es para la línea de suministro de agua, y

el canal b es para el cable eléctrico.

1 Corte el suministro de agua de la vivienda y

apague el interruptor de corriente o la fuente

de energía dedicada antes de conectar el

lavavajillas.

2 Pase la línea de suministro de agua a lo largo

del piso a 6 1/2" – 7 3/4" (165 mm – 197 mm)

del lado izquierdo de la abertura y fíjela con

cinta adhesiva delante de la abertura.

3 Pase el cable eléctrico c a lo largo del piso a

14" – 16" (356 mm – 406 mm) de la línea de

suministro de agua d y fíjelo en su sitio con

cinta adhesiva.

• El tomacorriente debe estar a 4 pies (1.22

m) de cualquiera de los lados del

lavavajillas.

• La mejor ubicación para el conducto

eléctrico es sobre el lado derecho de la

pared posterior. Redirija el cable eléctrico

antes de realizar la instalación en caso de

que la longitud de la tubería del conducto

es-us_main.book.book Page 12 Friday, January 20, 2023 8:45 AM

13INSTALACIÓN

ESPAÑOL

eléctrico sea mayor a 3" (76 mm) y esté

centrada en la pared posterior.

Preparación del lavavajillas

ADVERTENCIA

• No retire la cubierta de seguridad a. Si lo hace,

puede ocasionar incendios, descargas eléctricas

o la muerte.

Para soltar la manguera de

desagüe

Retire la atadura que sujeta la manguera de

desagüe a la parte posterior de la abrazadera de

envío.

Abrazadera de envío removible

La abrazadera de envío trasera puede ser

removida, si es necesario más espacio libre, al

instalar el lavaplatos debajo de un mostrador bajo.

Extracción de la cubierta inferior

PRECAUCIÓN

• Si recuesta el lavaplatos por la parte trasera,

hágalo con precaución de no dañar la manguera

de drenaje y la cuba.

1 Retire los tornillos ubicados a ambos lados

que sujetan la cubierta inferior al lavavajillas.

2 Retire la cubierta inferior.

3 Si hubiera material aislante detrás de la

cubierta inferior, retírelo.

4 Reserve las piezas hasta que se complete la

instalación.

Retiro de los materiales de

empaque del interior

Retire todos los materiales de empaque del

interior del lavavajillas antes de instalarlo.

Colocación de los soportes de

instalación

Para mostradores de madera u otros materiales

que no se dañen al taladrar, utilice los soportes de

instalación metálicos suministrados.

es-us_main.book.book Page 13 Friday, January 20, 2023 8:45 AM

14 INSTALACIÓN

Para mostradores de granito, mármol u otro

material que podría dañarse al taladrar, utilice los

tornillos para madera para sujetar el lavavajillas al

gabinete. Consulte las instrucciones de instalación

en la sección Sujeción del lavavajillas en la

abertura del gabinete.

NOTA

• Los soportes de instalación y los tornillos se

pueden encontrar en el cesto para cubiertos.

1 Inserte el extremo con lengüeta de los

soportes de instalación en las ranuras del

bastidor superior. Gire los soportes hasta que

los extremos con lengüeta queden hacia

arriba.

2 Doble las lengüetas de los soportes con un

par de pinzas de punta para fijarlos al

bastidor.

Deslizamiento del

lavavajillas en la abertura

del gabinete

Cómo deslizar el lavavajillas

PRECAUCIÓN

• No tire ni levante el lavavajillas usando la manija

a; hacerlo podría dañar la puerta y las bisagras.

• No empuje la puerta del lavavajillas con las

rodillas cuando lo deslice en su lugar. Hacerlo

podría dañar la cubierta frontal.

• No empuje la parte superior del lavavajillas.

Hacerlo podría dañar el interior del artefacto.

es-us_main.book.book Page 14 Friday, January 20, 2023 8:45 AM

15INSTALACIÓN

ESPAÑOL

NOTA

• Abra la puerta y sujete el bastidor del cuerpo del

lavavajillas y la abertura superior frontal b de la

cuba para mover o levantar el lavavajillas.

1 Alinee el lavavajillas con la abertura.

Asegúrese de que la línea de suministro de

agua y el cable eléctrico estén en la posición

correcta para que puedan deslizarse sin

problemas en sus canales.

2 Suavice o acolche los bordes del orificio

taladrado para el paso de la línea de

suministro de agua a fin de evitar dañar la

manguera de desagüe.

3 Asegúrese de enderezar la manguera de

desagüe antes de insertar su extremo a través

del orificio para el suministro de agua. A

medida que desliza el lavavajillas en la

abertura, es conveniente que tire lentamente

de la manguera de desagüe desde el interior

del gabinete para enderezarla. Para evitar

fugas o daños ocasionados por el agua, tenga

cuidado de no plegar, aplastar o tensar

demasiado la manguera de desagüe durante

la instalación.

4 Gradualmente, deslice el lavavajillas en la

abertura, asegurándose de que la línea de

suministro de agua y el cable eléctrico pasan

libremente por los canales y no quedan

atrapados bajo el lavavajillas.

PRECAUCIÓN

• Para evitar fallas o fugas, es importante que la

manguera de desagüe no quede plegada,

tirante ni aplastada detrás o debajo del

lavavajillas o dentro del gabinete adyacente.

• La garantía no cubre los daños derivados de una

instalación inadecuada.

• A medida que desliza el lavavajillas en la

abertura, deténgase periódicamente (o

solicítele a otra persona que lo ayude) para

tensar la manguera de desagüe, tirando de

ella hacia el interior del gabinete.

5 Retire la cinta de la línea de suministro de

agua y el cable eléctrico.

es-us_main.book.book Page 15 Friday, January 20, 2023 8:45 AM

16 INSTALACIÓN

Conexión de la línea de

suministro de agua y

energía eléctrica

Conexión de la línea de suministro

de agua

1 Con el suministro de agua de la vivienda

cerrado, conecte la línea de suministro de

agua a la válvula de entrada en la parte

delantera izquierda del lavavajillas.

PRECAUCIÓN

• No se debe utilizar cinta ni compuesto en la

válvula de entrada del lavavajillas.

2 Apriete la tuerca de compresión.

3 Deslice la línea de suministro de agua en el

canal tirando suavemente desde el interior

del gabinete para asegurarse de que la línea

no quede plegada, tirante o aplastada.

Conexión de la alimentación

eléctrica

El lavavajillas debe tener un circuito con la debida

conexión a tierra para conectar la configuración de

3 cables que incluye el cable a tierra.

Si se usa una línea de alimentación de 3 clavijas,

debe estar en un lugar accesible adyacente al

lavavajillas, a no más de 4 pies (1220 mm) del lado

del artefacto, nunca detrás del mismo.

NOTA

• La mejor ubicación para el conducto eléctrico es

sobre el lado derecho de la pared posterior.

Redirija el cable eléctrico antes de realizar la

instalación en caso de que la longitud de la

tubería del conducto eléctrico sea mayor a 3” (76

mm) y esté centrada en la pared posterior.

1 Desde el interruptor de corriente, apague el

suministro de energía eléctrica que va a la

unidad.

2 Use un destornillador Phillips para quitar el

tornillo de la cubierta de la caja de empalmes

y retire la cubierta.

3 Utilice un destornillador Phillips para retirar 2

tornillos a.

4 Retire la caja de empalmes del artefacto.

5 Inserte un aliviador de tensión b de 3/8” a

través del orificio de la caja de empalmes.

es-us_main.book.book Page 16 Friday, January 20, 2023 8:45 AM

17INSTALACIÓN

ESPAÑOL

Apriete la tuerca redonda c para asegurarlo

en su sitio.

6 Inserte el cable eléctrico a través del orificio

del aliviador de tensión. Ajuste los 2 tornillos

para asegurarlo.

7 Tire de los cables existentes a través de las

aberturas de la caja de empalmes. Ajuste los 2

tornillos d para volver a ensamblar la caja de

empalmes en el artefacto.

8 Haga coincidir los cables blanco, negro y

verde con los cables de los colores

correspondientes del lavavajillas. Luego, gire

las tuercas para cables e suministradas y

apriételas firmemente para conectar los

cables correspondientes.

9 Envuelva cada conexión con cinta aislante f.

10 Pliegue los cables conectados, introdúzcalos

nuevamente dentro de la caja de empalmes y

atornille la cubierta de la caja.

ADVERTENCIA

• Verifique que el cable negro esté caliente (120 V).

De no ser así o si no está seguro de que haya

suministro eléctrico, solicite que lo verifique un

electricista calificado.

PRECAUCIÓN

• No deje expuesto ningún cable pelado. Recorte

el cable pelado para que quepa completamente

dentro de las tuercas para cable.

Conexión de la manguera de

desagüe

Si el extremo de la manguera de desagüe no se

adapta a la línea de desagüe, use un adaptador

resistente al calor y al detergente (no está

incluido). Este accesorio se puede comprar en una

tienda local de artículos de fontanería.

• Corte el adaptador para que el extremo coincida

con el tamaño de la conexión de desagüe.

es-us_main.book.book Page 17 Friday, January 20, 2023 8:45 AM

19INSTALACIÓN

ESPAÑOL

1 Extraiga el tapón ciego con un martillo y un

destornillador.

PRECAUCIÓN

• Si no se p59-ha extraído el tapón ciego, el lavavajillas

no podrá desagotar correctamente.

2 Sujete la manguera de desagüe a la pieza en T

para desechos con la abrazadera para

manguera suministrada. Mueva la abrazadera

a la posición correcta y apriétela con un

destornillador de hoja plana.

Conexión al triturador o a la pieza

en T para desechos con trampa de

aire

1 Extraiga el tapón ciego con un martillo y un

destornillador.

2 Conecte el extremo de la manguera de

desagüe a a la trampa de aire b con la

abrazadera para manguera suministrada.

Mueva la abrazadera a la posición correcta y

apriétela con un destornillador de hoja plana.

• Esto impide que el agua haga sifón desde la

cuba.

3 Si no está conectado, acople el conector de la

manguera de caucho a la pieza en T para

desechos o al triturador con una abrazadera

para manguera (no incluida).

Nivelado del lavavajillas

Verifique que el lavavajillas esté nivelado y ajuste

las patas de nivelación si es necesario.

PRECAUCIÓN

• Si el lavavajillas no está bien nivelado, pueden

producirse fugas, problemas para cerrar la

puerta o ruidos.

• Si la abertura del gabinete es más angosta de lo

recomendado (ver Preparación de la abertura

del gabinete), el lavavajillas debe nivelarse y

alinearse cuidadosamente para que este se

apoye completamente en las 3 patas de

nivelación y no quede colgado de los soportes

de instalación. De lo contrario, el lavavajillas

puede no funcionar o pueden producirse fugas

desde la parte frontal del lavavajillas, errores AE

y dificultad para cerrar la puerta.

Cómo comprobar que el lavavajillas

esté nivelado

Para verificar que la cuba esté nivelada de

adelante hacia atrás, retire la bandeja inferior y

vierta 169 oz. (5 L) de agua en el fondo de la cuba.

El nivel del agua debe quedar cerca del centro de

las dos muescas inferiores que presenta la cuba en

la parte delantera.

es-us_main.book.book Page 19 Friday, January 20, 2023 8:45 AM

20 INSTALACIÓN

Tras extraer la bandeja inferior, coloque un nivel

en la pared interior de la cuba para verificar que el

lavavajillas esté nivelado de lado a lado.

• Si no tiene un nivel, en su lugar puede utilizar

una aplicación de nivel de un teléfono

inteligente.

Asegúrese de que el espacio entre las paredes de

la cuba y el revestimiento de la puerta sea el

mismo de cada lado.

Ajuste de las patas de nivelación

Ajuste según sea necesario hasta que el

lavavajillas esté completamente nivelado.

• Ajuste las patas de nivelación delanteras y

traseras hasta que hagan contacto firme con el

piso. Si el lavavajillas no está bien nivelado,

puede impedir que la puerta cierre

correctamente y el artefacto no se encenderá.

Ajuste de las patas de nivelación

delanteras

Use un destornillador de punta plana para girar las

patas de nivelación delanteras y ajustar la parte

frontal de la cuba.

• Haga girar las patas de nivelación delanteras en

el sentido de las agujas del reloj para levantar la

parte frontal de la cuba y en el sentido contrario

a las agujas del reloj para bajarla.

• Los ajustes funcionan de la misma forma para

ambas patas de nivelación.

• Cuando no disponga de un destornillador de

punta plana, use una llave con accionamiento

cuadrado de 1/4" a o una llave con

accionamiento cuadrado de 3/8" b con casquillo

de 1/2" c para girar las patas de nivelación

delanteras y ajustar el frente de la cuba.

Ajuste de la pata de nivelación trasera

Use un destornillador Phillips para ajustar la pata

de nivelación trasera y la parte posterior de la cuba

girando el tornillo central que se encuentra en la

parte delantera de la base del artefacto.

• Haga girar el tornillo central en el sentido de las

agujas del reloj para levantar la parte posterior

de la cuba y en el sentido contrario a las agujas

del reloj para bajarla.

NOTA

• Para evitar producir daños en el tornillo, no

utilice un destornillador eléctrico.

es-us_main.book.book Page 20 Friday, January 20, 2023 8:45 AM

Produkt Specifikationer

Mærke:	LG
Kategori:	Opvaskemaskine
Model:	LDFC2423V

Har du brug for hjælp?

Hvis du har brug for hjælp til LG LDFC2423V stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Opvaskemaskine LG Manualer

LG LDTH555NS Manual

31 Marts 2025

LG XD3A25PS Manual

6 Februar 2025

LG Studio LSDF995ST Manual

22 December 2024

22 December 2024

22 December 2024

4 Oktober 2024

6 September 2024

5 September 2024

31 August 2024

31 August 2024

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer

Sharp QW-I1GI47EX Manual

9 April 2025

Hotpoint HA6FA14BN7A0X Manual

8 April 2025

Asko DFI544BXXL Manual

7 April 2025

Asko DFI534A Manual

7 April 2025

Asko DFI545V Manual

7 April 2025

Asko DFI545N Manual

7 April 2025

Arçelik AB 252 Manual

6 April 2025

Arçelik 6466 Manual

6 April 2025

Arçelik 6667 WF I Manual

6 April 2025

Etna VW938CR Manual

6 April 2025