LG V280 Manual


Læs nedenfor 📖 manual på dansk for LG V280 (36 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 28 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/36
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNERS MANUAL
MODEL : V280
Before connecting, operating or adjusting this
product, please read this instruction booklet carefully
and completely.
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference.
This manual provides information on the operation and
maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
About the Symbol Display
may appear on your TV display during operation
and indicates that the function explained in this owner’s
manual is not available on that specific DVD video disc.
Symbol Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols is
applicable only to the disc represented by the symbol.
All discs listed below
DVD and finalized DVD±R/RW
Audio CDs
MP3 files
WMA files
DivX files
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on the
surface. Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the
center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
DivX
WMA
MP3
ACD
DVD
ALL
Before Use
4
Notes:
If you insert a disc while this unit is in the VCR mode,
this unit will switch to DVD mode automatically.
If you insert a cassette tape without prevention tab
while this unit is in the DVD mode, this unit will switch
to VCR mode automatically.
Selecting the Viewing Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
lights and output source of DVD deck is viewed on the
TV screen.
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
lights and output source of VCR deck is viewed on the
TV screen.
Types of Playable Discs
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit plays DVD±R/RW and CD-R/RW
that contains audio titles, DivX, MP3, WMA, and/or
JPEG files.
This indicates a product feature that is capable
of playing DVD-RW discs recorded with Video
Recording format.
Notes:
Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD±R/RW) disc itself,
some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in mal-
functions.
This unit requires discs and recordings to meet cer-
tain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatical-
ly set to these standards. There are many different
types of recordable disc formats (including CD-R con-
taining MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compat-
ible playback.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always be sought from the copyright owner.
Regional Code
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled same as
the rear of the unit or “ALL”.
Notes on Regional Codes
Most DVD discs have a globe with one or more num-
bers in it clearly visible on the cover. This number
must match your unit’s regional code or the disc can-
not play.
If you try to play a DVD with a different regional code
from your player, the message “Check Regional
Code” appears on the TV screen.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show, broad-
cast via cable, play in public, or rent copyrighted materi-
al without permission. This product features the copy
protection function developed by Macrovision. Copy
protection signals are recorded on some discs. When
recording and playing the pictures of these discs picture
noise will appear. This product incorporates copyright
protection technology that is protected by method
claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disas-
sembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COM-
PATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
Introduction
5
Before Use (Continued)
Front Panel
6
1. Disc Tray
Insert a disc here.
2. 1
1
1
1
1/
/
/
/
/I
Switches the unit to ON or OFF.
3. PROG. (V/v)
Channel Programme Selectors
.
4. DVD
Opens or closes the disc tray.
5. Display window
Shows the current status of the unit.
DVD: DVD deck is selected.
: A disc is loaded in the DVD deck.
[P]: Indicates the Progressive Scan is set to On mode.
: Indicates repeat mode.
: Child Lock is engaged.
: DVD+VCR is in timer recording or a timer
recording is programmed.
: A Cassette is in the VCR deck.
VCR: VCR deck is selected.
REC:
VCR recording is engaged.
DVD to Video tape copy is in progress.
TV: Indicates TV mode.
(See Notes on page 21.)
:
Indicates total playing time/elapsed
time/current time.
6. Remote Sensor
Point the remote control here.
7. Tape Compartment
8. VCR
Tape Eject
9. .
.
.
.
./
/
/
/
/m
m
m
m
m
Go to beginning of current chapter/track or to
PREVIOUS chapter/track.
Press and hold for two seconds for a fast reverse
search. Rewinds the tape.
10. N
N
N
N
N
Starts playback.
11. M
M
M
M
M/
/
/
/
/>
>
>
>
>
Go to NEXT chapter/track.
Press and hold for two seconds for a fast forward
search. Winds the tape forwards.
12. x
x
x
x
x
Stops playback.
13. DVD/VCR
DVD/VCR Selector
14. Video IN Jack
15.
Audio IN (L/R) Jacks
3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Introduction
7
Remote Control
Remote Control Operation
Point the remote control at the remote sensor and press
the buttons.
Do not mix old and new batteries and never mix
different types of batteries such as standard,
alkaline, etc.
Remote control battery installation
Detach the battery cover on the rear of the
remote control, and insert two batteries (size
AAA) with 3 and #aligned correctly.).
AAA
AAA
POWER
Switch this unit ON or OFF.
DVD/VCR select button
Selects operational mode of
remote control.
OPEN/CLOSE
EJECT
Open or close the disc tray.
Tape Eject.
0-9 numerical buttons
Select numbered items in a menu.
TV/VCR
Switch between your TV’s tuner
and the VCR’s internal tuner.
AV
Select input source for recording
into tape.
BACKWARD / FORWARD
( )m/ M
DVD: Search backward or forward.
VCR: Rewinds the tape during the
STOP mode, for fast reverse picture
search and Advances the tape during
the STOP mode, fast forward picture
search.
SKIP (./ >)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous
chapter or track.
PAUSE/STEP (X)
Pause playback temporarily / press
repeatedly for frame-by-frame
playback.
PLAY (N
N
N
N
N)
Starts playback.
STOP ( Á
Á
Á
Á
Á)
Stops playback.
MARKER
Mark any point during playback.
SEARCH
Display MARKER SEARCH menu.
CLEAR
Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
REPEAT
Repeat chapter, track, title, all.
TV Control Buttons (see p. 33)
TV POWER: Turns on or off the TV.
TV AV: Selects the TV’s source.
TV PR +/:Selects TV’s channel.
TV VOL +/:Adjusts TV’s volume.
DISPLAY
CLK/CNT
Access the On-Screen Display.
Shows you the current time or
counter.
F G D E (left/right/up/down)
Select an item in the menu.
PR/TRK(+/-)
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
ENTER/OK
Acknowledge menu selection.
DISC MENU
Access menu of a DVD disc.
SETUP/ i
Access or remove setup menu.
RETURN
Hides or displays the help menu
while watching JPEG picture in full
screen.
AUDIO
Select an audio language (DVD).
SUBTITLE
Select a subtitle language.
ANGLE
Select DVD camera angle if available
ZOOM
Enlarge video image.
REC/ITR (O
O
O
O
O)
Record your input sources into tape.
LOCK (Child Lock)
Switch the Child Lock on and off.
TITLE
Display the title menu of the disc if
available.
PROGRAM
Access or remove program menu.
A-B/LP
Repeat sequence.
Select the recording speed of the
tape.
RANDOM/CM SKIP
Play tracks in random order.
CM SKIP
Preparation
9
Connections
Caution:
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
Do not connect this unit’s AUDIO OUT jack to the
phone in jack (record deck) of your audio system.
Connecting to a TV & Decoder
(or Satellite)
Make one of the following connections, depending on
the capabilities of your existing equipment.
Basic connection (AV)
1. Connect the EURO AV1 AUDIO/VIDEO on the rear
panel of this unit to the SCART input socket on the
TV using a SCART lead (S1).
2. Some TV broadcasters transmit encoded television
signals which you can only see with a purchased or
rented decoder. You can connect such a decoder
(descrambler) to this unit (S2).
or
1. Connect the jacks on theVIDEO (DVD/VCR OUT)
DVD Player to the corresponding in jacks on the TV
using the video cable (V).
2. Connect the Left and Right or AUDIO (DVD/VCR
OUT) jacks of the DVD+VCR to the audio left/right in
jacks on the TV using the audio cables (A1).
Note:
The encoded television signals (CANAL+ or PRE-
MIERE) are not decoded in the 1W Mode (see p. 25).
Basic connection (RF)
1. Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel of
this unit.
2. Connect the supplied RF antenna cable from the
RF.OUT jack on the rear panel of this unit to your
television’s Antenna Input (R).
DVD exclusive out connection
Component Video connection
1. Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD Player to the
corresponding in jacks on the TV using the Y Pb Pr
cable (C).
2. Connect the Left and Right jacks ofAUDIO OUT
this unit to the audio left/right in jacks on the TV
using the audio cables (A2).
Progressive Scan connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD
Player’s progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
1. Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD Player to the corre-
sponding in jacks on the TV using the Y Pb Pr cable.
2. Connect the Left and Right jacks of theAUDIO OUT
this unit to the audio left/right in jacks on the TV
using the audio cables.
Notes:
Set the Progressive to “On” on the setup menu for
progressive signal, see page 17.
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
AUDIO INPUT
L
R
AERIAL
Rear of TV
Rear of this unit (Basic connection)
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
Pr
Pb Y
VIDEO
INPUT
Decoder (or Satellite)
SCART INPUT
RV A1
S2
S1
AUDIO INPUT
L
R
AERIAL
Rear of TV
Rear of this unit (DVD exclusive out connection)
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
Pr
Pb Y
VIDEO
INPUT SCART INPUT
C A2
Preparation
11
Before Operation-VCR part
Tuning in a video channel on your
TV
Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from
the DVD+VCR through the RF cable.
If you have used a SCART lead you will not have to
tune your TV, simply select the AV channel. The AV
channel is already pre-tuned for optimum video play-
back on your TV.
Perform the following steps only if interference appears
in the TV picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connec-
tion to AV connection, or vise versa.
1. Turn on DVD+VCR and TV.
2. Set the vacant position 36 on your TV.
3. Press POWER on the remote control to enter the
stand by mode (the clock indicator will be
dimmed).
4. Press and hold PROG. (v
v
v
v
vor V
V
V
V
V)on the DVD+VCR
for more than 4 seconds.
RF 36 will appear in the display.
The following picture will be displayed on the TV
screen.
If the picture is snowy, move to step 5. If the picture
is clean, press on the DVD+VCR to finish.POWER
5. Press PROG. (v
v
v
v
vor V
V
V
V
V)on the DVD+VCR to set the
video channel to a vacant position between 22 and
68 which is not occupied by any local station in your
area.
Note:
The RF channel will not change until step 6 has
been executed.
6. Press POWER to store the new RF video channel
into the DVD+VCR memory.
Now tune your TV set to the new DVD+VCR RF
channel.
Note
If the TV picture was clear in step 4, do not retune your
TV.
Using your VCR for the very first
time
Following picture will display on the TV screen when
you have just connected your video recorder for the
very first time.
To make tuning TV stations, please follow stages 3 to 4
as shown "ACMS" (see p.13).
RF CHANNEL 36
A
N NL P S SF OTHERS
BDDK EF I
OK
i
Pr-12
ACMS
CH
Before Operation-VCR part
12
Setting the clock Manually
The clock in your DVD+VCR controls time and date set-
tings for your DVD+VCR.
1. Press i.
Press b
b
b
b
bor B
B
B
B
Bto select SET.
Press ENTER/OK.
2. Use the v
v
v
v
vor V
V
V
V
Von the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
The day of the week will appear automatically when
you enter the year.
3. If you make a mistake press b
b
b
b
bor B
B
B
B
Band enter the
correct details.
4. Press ito return to a TV picture.
To set the colour system
1. Press i.
2. The main menu will appear on the TV screen.
3. Press 1or 2to select the SYS and press
ENTER/OK.
4. Press 3or 4to select according to the COLOUR
system used.
5. Press 2to select the RF AUDIO.
Press 3or 4to select according to the RF AUDIO
used.
6. Press ito remove the menus from the TV screen.
HH MM DD MM YY
: . .- -- - - - - - - - - - -
i
1 2
SET
HH MM DD MM YY
: . .00 1 01 MON 8 07
1 2
SET
i
SYS
ON
OFF
OSD
f
i
SYS
SYS
ON
OFF
OSD
f
i
SYS
Before Operation-VCR part
Tuning in TV Stations Manually
In certain areas of the country broadcast signals may
be too weak for your DVD+VCR’s automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations man-
ually in order for your DVD+VCR to store them.
1. Press i.
The main menu will appear on the TV screen.
Press 1 2or to select the PR SET.
Press ENTER/OK.
2. Press i.
The station table will appear.
3. Press 3or 4to select the programme number that
you want to tune (for example, PR 04).
4. Press ENTER/OK.
Press (CableAV to select C(Standard stations) or S
stations):
C02 - C69, S01 - S41.
Enter the channel number of station that you want to
tune, use to find the required station.3 4or
5. Searching will stop when it locates a stations.
Press 2to select MFT.
Control the fine tuning of the station by using 3 4or
.
6. Press 2to select STATION so that you may name
your TV station.
Press ENTER/OK.
7. Use and 3or 4to select letters numbers for the
station name.
Use 1or 2to move back and forth between
characters.
Press ENTER/OK.
8. Press i, confirm the station placement.
If you wish to manually tune other stations repeat
stages 3 - 8.
9. Press again.i
Your new TV station has now been tuned into your
DVD+VCR.
PR CH MFT
04 00C04
i
OK
STATION
PSET
R
-
PR CH MFT STATION
04 00C04 PR-04
i
OK
P
SET
R
02 C02 00 PR-02
03 C03 00 PR-03
04 C04 00 PR-04
05 - - - - - - - - -
06 - - - - - - - - -
07 - - - - - - - - -
08 - - - - - - - - -
01 C01 00 PR-01
OK
i
,DELETE :
MOVE :
PSET
R
PR CH STATION
04 00 C04
MFT
CHANNEL/CABLE : AV
P
SET
R
i
14
16
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
1. Press DISPLAY to show various playback
information.
The items displayed differ depending on the disc
type or playing status.
2. You can select an item by pressing v V/ and
change or select the setting by pressing b B/ .
Title (Track) Current title (or track) number/total
number of titles (or tracks)
Chapter Current chapter number/total number of
chapters
Time Elapsed playing time
Audio Selected audio language or channel
Subtitle Selected subtitle
Angle Selected angle/total number of angles
Note:
If no button is pressed for a few seconds, the on-screen
display disappears.
Initial Settings
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup
menu item, see pages 16 to 19.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press Bon the remote control.
To go back to the previous level:
Press bon the remote control.
General Operation
1. Press DVD on the remote control.
2. Press SETUP.
The Setup menu appears.
3. Use v V/ to select the desired option then press B
to move to the second level.
The screen shows the current setting for the
selected item, as well as alternate setting(s).
4. Use v V/ to select the second desired option then
press Bto move to the third level.
5. Use v V/ to select the desired setting then press
ENTER/OK to confirm your selection.
Some items require additional steps.
6. Press SETUP or N
N
N
N
Nexit the Setup menu.
Before Operation-DVD part


Produkt Specifikationer

Mærke: LG
Kategori: Ikke kategoriseret
Model: V280

Har du brug for hjælp?

Hvis du har brug for hjælp til LG V280 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret LG Manualer

LG

LG DTL-7740 Manual

9 Januar 2025
LG

LG MF-JM52 Manual

8 Januar 2025
LG

LG MBD62I Manual

8 Januar 2025
LG

LG 24BR750E Manual

4 Januar 2025
LG

LG 24BP45YP Manual

4 Januar 2025
LG

LG 24BN55YP Manual

4 Januar 2025
LG

LG 24CK550 Manual

4 Januar 2025
LG

LG 24BR750C Manual

4 Januar 2025
LG

LG 24ML60SP Manual

4 Januar 2025
LG

LG 24GS65F Manual

4 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer