Liebherr SBSbs 8673 Manual

Liebherr Fryser SBSbs 8673

Læs nedenfor 📖 manual på dansk for Liebherr SBSbs 8673 (54 sider) i kategorien Fryser. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/54

User Guide

freezer

20220916 7088213 - 00

(S)GN(es)

1.7 SmartGrid

Depending on model and options, your

appliance is prepared for the advanced

"SmartGrid" technology.

SmartGrid is a future option for reducing household elec‐

tricity costs via an intelligent meter supplied by the energy

provider. In the event of surplus energy being generated, for

instance, by regenerative sources, households are supplied

with low-cost electricity. SmartGrid-ready upright freezers

are prepared for this future technology. With an appropriate

additional module, you will be in a position to optimise your

electricity costs.

For more information about the benefits, requirements

and operating principle visit the homepage of your energy

provider and www.liebherr.com.

1.8 Smart device

The appliance is ready for integration into a

smart home and for extended services. With a

SmartDevice Box, you can activate this and other

options. This is activated via the MyLiebherr

customer portal.

Note

The SmartDevice Box is available for purchase from the

Liebherr Household Store (home.liebherr.com).

You will find more information about availability and

prerequisites and the individual options on the website,

www.smartdevice.liebherr.com.

2 General safety instructions

Please keep these instructions in a safe place and pass

them on to any subsequent owners.*

Please keep these operating instructions in a safe place so

you can refer back to them at any time.*

If you pass the appliance on, please hand these operating

instructions to the next user.*

Read these operating instructions carefully before use to

ensure safe and correct use of the appliance. Follow the

instructions, safety instructions and warning messages

included at all times. They are important for ensuring you

can operate and install the appliance safely and without any

problems.

Danger for the user:

-This device can be used by children and people with

impaired physical, sensory or mental abilities or with a

lack of experience and knowledge provided that they are

supervised or have received instruction in the safe use

of this device, and about the resulting hazards. Children

must not play with this appliance. Cleaning and user

maintenance work must not be carried out by children

without adult supervision. Children aged between 3 and

8 are allowed to load and unload the appliance. Children

below the age of 3 must be kept away from the appliance

unless they are under continuous adult supervision.

-The socket must be easily accessible so that the appli‐

ance can be disconnected quickly from the electricity in

an emergency. It must not be located in the area behind

the appliance.

-When disconnecting the appliance from the supply,

always take hold of the plug. Do not pull the cable.

-In the event of a fault pull out the mains plug or deacti‐

vate the fuse.

-Do not damage the mains power cable. Do not operate

the appliance with a defective mains power cable.

-If the supply cord is damaged, it must be replaced by a

special cord or assembly available from the manufacturer

or its service agent.*

-Only customer service or other specially trained staff

may repair or perform other operations on the appliance.

-Only assemble, connect and dispose of the appliance

according to the instructions.

-Special lights, such as LED lights on the appliance, are

used to illuminate the interior of the appliance and are

not suitable for room lighting.*

-The manufacturer is not liable for damage caused by a

faulty fixed water connection.

Fire hazard:

-This appliance contains a refrigerant which is environ‐

mentally friendly, but flammable. Leaking refrigerant may

ignite. It is hazardous for anyone other than an Author‐

ised Service Person to service this appliance. In Queens‐

land, the authorised Service Person MUST hold a Gas

Work Authorisation for hydrocarbon refrigerants, to carry

out Servicing or repairs where the gas system is being

opened or charged.*

-The coolant used (information on the model plate) is

ecofriendly but also flammable. Any leaking coolant may

ignite.

•Do not damage the refrigerant circuit pipes.

•Do not handle ignition sources inside the appliance.

•Do not use electrical appliances inside the appliance

(e.g. steam cleaners, heaters, ice cream makers, etc.).

•If the refrigerant leaks: remove any naked flames or

ignition sources from the vicinity of the leakage point.

Properly air the room. Inform customer services.

-Do not store explosives or sprays using combustible

propellants such as butane, propane, pentane, etc. in the

appliance. To identify these spray cans, look for the list of

contents printed on the can, or a flame symbol. Gases

possibly escaping may ignite due to electrical compo‐

nents.

-Keep burning candles, lamps and other items with naked

flames away from the appliance so that they do not set

the appliance on fire.

-WARNING: Keep ventilation openings, in the appliance

enclosure or in the built-in structure, clear of obstruc‐

tion.*

-WARNING: Do not use mechanical devices or other

means to accelerate the defrosting process, other than

those recommended by the manufacturer.*

-WARNING: Do not damage the refrigerant circuit.*

-Please be sure to store alcoholic drinks or other pack‐

aging containing alcohol in tightly closed containers.

Any alcohol that leaks out may be ignited by electrical

components.

Danger of tipping and falling:

-Do not misuse the plinth, drawers, doors etc. as a step or

for support. This applies particularly to children.

Danger of food poisoning:

-Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

-Avoid prolonged skin contact with cold surfaces or refri‐

gerated/frozen goods or take protective measures, e.g

wear gloves.

-Do not consume ice cream, water ice or ice cubes imme‐

diately and do not consume them too cold.*

General safety instructions

4 * Depending on model and options

Back:

Cancels the selection.

The display switches to the next

higher level or to the home screen

OK:

Confirms the selection.

After confirmation the display

switches to the home screen.

ON / OFF, START / STOP

Starts/ stops options.

After selecting or cancelling an

option the display switches to the

home screen.

RESET:

Resets timer.

Access to customer service

Note

If no selection is made after 1 minute the display

switches to the home screen.

3.4 Display symbols

Display symbols provide information on the current appli‐

ance status:

Up arrows:

The temperature increases.

Down arrows:

The temperature reduces.

Standby:

The appliance or temperature zone

is switched off.

Messages:

There are active error messages

and reminders.

3.5 Appliance options

You can select or set the following options; explanations

and setting options, (see 5 Control) :

Symbol Option

SuperFrostx

SabbathMode

IceMakerx

Child safety device x

Temperature unit

Status displayx

Smart Gridx

x If the option is selected, the relevant symbol is displayed

in the menu field.

If more than 6 selected options are selected only 4 options

are displayed in the menu field. The other options are

displayed by pressing the bottom navigation arrow. Pressing

the navigation arrow repeatedly takes you back to the home

screen.

The symbol disappears if the option ends or is disabled.

4 Putting into operation

4.1 Transporting the appliance

uTransport the appliance only in suitable packaging.

uTransport the appliance upright.

uDo not transport the appliance on your own.

4.2 Installing the appliance

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause

short circuits.

uThe appliance is designed for use in enclosed areas. Do

not operate the appliance outdoors or in areas where it is

exposed to splash water or damp conditions.

WARNING

Improper use!

Fire. If a mains cable/plug comes into contact with the back

of the appliance, the mains cable/plug can be damaged by

appliance vibrations and this may result in a short circuit.

uStand the appliance so that it is not touched by connec‐

tors or main cables.

uDo not connect any appliances to sockets in the area of

the back of the appliance.

uMulti-sockets/power distributors and other electronic

appliances (such as halogen transformers) may not be

placed and operated at the back of appliances.

WARNING

Leaking coolant and oil!

Fire. The coolant contained in the appliance is eco-friendly,

but also flammable. The oil contained in the appliance

is flammable. Escaping coolant and oil can ignite if the

concentration is high enough and in contact with an

external heat source.

uDo not damage the pipelines of the coolant circuit and

the compressor.

WARNING

Fire hazard and danger of damage!

uDo not place appliances emitting heat e.g. microwaves,

toasters etc. on the appliance!

Putting into operation

6 * Depending on model and options

For appliances without the soft stop mechanism these

sections apply:*

qFor appliances the soft stop mechanismwithout

qFor all appliances

NOTICE

Risk of condensation damage for Side-by-Side appliances!*

Certain appliances can be set up as Side-by-Side combina‐

tions (two appliances next to each other).

If your appliance is :a Side-by-Side (SBS) appliance

uSet up the SBS combination in accordance with the

enclosed document.

If the :positioning of the devices is stipulated

uDo not change the door hinges over.

4.3.1 Remove the soft stop mechanism*

For appliances with the soft stop mechanism:*

Fig. 7

uOpen the door.

NOTICE

Risk of damage!

If the door seal is damaged, the door may fail to close prop‐

erly and the cooling will be inadequate.

uDo not damage the door seal with the screwdriver!

uRemove the outer cover. Fig. 7 (1)

uDisengage and release the bearing bracket cover.

Remove the bearing bracket cover. Fig. 7 (2)

uUnlatch the panel with a slotted screwdriver and swivel it

to one side. Fig. 7 (3)

Fig. 8

CAUTION

Crushing hazard by joint folding up!

uEngage safety device.

uEngage the locking device in the opening. Fig. 8 (1)

uUnscrew the bolt with a screwdriver. Fig. 8 (2)

uRemove the bolt in an upward direction. Fig. 8 (3)

uTurn the hinge in the direction of the door. Fig. 8 (4)

Fig. 9

uPress the tab with the slotted screwdriver. Fig. 9 (1)

uPull cover out of the catch mechanism. Fig. 9 (2)

Fig. 10

uUndo the soft stop mechanism screw with a T15 screw‐

driver approx. 14 mm. Fig. 10 (1)

uInsert a screwdriver behind the soft stop mechanism on

the handle side and rotate forwards. Fig. 10 (2)

uRemove the soft stop mechanism. Fig. 10 (3)

4.3.2 Remove the door

For appliances without a soft top mechanism:*

Putting into operation

8 * Depending on model and options

Fig. 24

uSlide the soft stop mechanism on the bearing bracket

side at an angle into the slot as far as the limit stop.

Fig. 24 (1)

uSlide the unit in fully.

wThe unit is positioned correctly when the rib on the soft

stop mechanism is in the guide in the housing.

uTighten the screw with the T15 screwdriver. Fig. 24 (2)

Fig. 25

The door is open 90°.

uTurn the hinge in the bearing bracket. Fig. 25 (1)

uInsert the bolt in the bearing bracket and hinge. Make

sure that the catch mechanism is sitting correctly in the

groove. Fig. 25 (2)

uRemove the locking device. Fig. 25 (3)

uSlide on the cover. Fig. 25 (4)

Fig. 26

uPosition the bearing bracket and engage. If necessary

push apart carefully. Fig. 26 (1)

uPosition the panel. Fig. 26 (2)

uSwing in the panel and click into place. Fig. 26 (3)

uSlide on the external cover. Fig. 26 (4)

uClose the upper door. Fig. 26 (5)

4.4 Water connection

WARNING

Electricity in combination with water!

Electric shock.

uBefore connecting to the water pipe: Disconnect the

appliance from the mains.

uBefore connecting to water supply lines: Shut off the

water supply.

uThe connection to the drinking water mains may only be

carried out by a qualified gas and water engineer.

WARNING

Risk of poisoning!

uThe water quality has to comply with the drinking water

ordinance of the respective country (e.g. 98/8

uConnect to the drinking water supply only.

uThe IceMaker serves exclusively for making ice cubes in

household quantities and has to be operated with water

suitable for the purpose.

Fig. 27

a b c M

~ 1100 mm ~ 700 mm ~ 110 mm Solenoid valve

Putting into operation

* Depending on model and options 13

less occurs during operation, check whether it is due to a

handling error. In this case you will have to be charged for

the costs incurred, even during the warranty period. You

may be able to rectify the following faults yourself:

Defect Cause Remedy

Appliance does not

work.

→ The appliance is not switched on. uSwitching on the appliance.

→ The power plug is not properly

inserted in the wall socket.

uCheck power plug.

→ The fuse of the wall socket is not in

order.

uCheck fuse.

→ The appliance plug does not fit the

appliance properly.

uCheck the appliance plug.

The compressor

runs for a long

time.

→ The compressor switches to a

low speed when little cold is

needed. Although the running time

is increased as a result, energy is

saved.

uThis is normal in energy-saving models.

→ SuperFrost is activated. uThe compressor runs for longer in order to rapidly cool

the food. This is normal.

Excessive noise. → Due to the various speed steps,

speed-regulated* compressors can

generate different running noises.

uThe sound is normal.

A bubbling and

gurgling noise.

→ This noise comes from the refrig‐

erant flowing in the refrigeration

circuit.

uThe sound is normal.

A quiet clicking

noise.

→ The noise is produced whenever

the refrigeration unit (motor) auto‐

matically switches on or off.

uThe sound is normal.

A hum. It is briefly

a little louder

when the refrig‐

eration unit (the

motor) switches

on.

→ The refrigeration increases auto‐

matically when the SuperFrost,

function is activated, fresh food

has just been placed in the appli‐

ance or the door has been left open

for a while.

uThe sound is normal.

→ The ambient temperature is too

high.

uSolution: (see 1.2 Appliance range of use)

A low hum. → The sound is produced by air flow

noise of the fan.

uThe sound is normal.

Vibration noises → The appliance is not standing

firmly on the floor. As a result

objects and adjacent units start

to vibrate when the refrigerator is

running.

uAlign the appliance using the adjustable feet.

Flow sound at the

soft stop mecha‐

nism.*

→ The noise is produced when the

door is opened and closed.

uThe sound is normal.

The DEMO symbol

appears on the

screen. In addition

some time elapses.

→ DEMO mode is activated. uOFF Press .

DEMO is displayed

in the top right

corner of the

screen.

→ DEMO mode is activated. uUnplug the appliance.

uPlug the appliance in again.

wThe DEMO symbol appears on the screen. In addition

some time elapses.

uOFF Press .

The outer surfaces

of the appliance

are warm*.

→ The heat of the refrigeration circuit

is used to prevent condensate from

forming.

uThis is normal.

Malfunctions

* Depending on model and options 23

Defect Cause Remedy

The IceMaker

cannot be

switched on.

→ The appliance and therefore the

IceMaker are not connected.

uConnect the appliance to the mains (see 4 Putting into

operation) .

The IceMaker does

not make any ice

cubes.

→ The IceMaker is not switched on. uSwitch on the IceMaker.

→ The drawer of the IceMaker is not

properly closed.

uClose the drawer properly.

→ The water connection is not open. uOpen the water connection.

Functions in the

IceMaker submenu

do not start.

→ Ice cube tray rotates. uTry again after 1 minute.

The temperature is

not cold enough.

→ The door of the appliance is not

properly closed.

uClose the door of the appliance.

→ Insufficient ventilation. uKeep ventilation grille clear, and clean it.

→ The ambient temperature is too

high.

uSolution: (see 1.2 Appliance range of use) .

→ The appliance was opened too

frequently or for too long.

uWait to see whether the appliance reaches the required

temperature by itself. If not, please contact the after

sales service (see 6 Maintenance) .

→ Too much fresh food was placed

inside without SuperFrost.

uSolution: (see 5.9 SuperFrost)

→ The temperature is incorrectly set. uSet the temperature to a colder setting and check after

24 hours.

→ The appliance is too close to a

source of heat (stove, heater etc).

uChange the position of the appliance or the source of

heat.

The status display

does not light up.

→ The status display is switched off. uSwitch the status display on .

→ The door is open. uClose the door.

→ The appliance is switched off. uSwitch the appliance on.

→ LED is faulty. uContact Customer Services (see 6 Maintenance) .

The internal light

does not come on.*

→ The appliance is not switched on. uSwitch the appliance on.

→ The door was open for longer than

15 minutes.

uThe internal light switches itself off automatically after

about 15 minutes if the door is open.

→ The LED illumination is faulty or the

cover is damaged: WARNING

Risk of injury due to electric shock!

There are live electrical parts under the cover.

uOnly ever have the inside LED light replaced or repaired

by customer service or trained personnel.

WARNING

Risk of injury from LED bulb!

The light intensity of the LED light corresponds to hazard

group RG 2.

If the cover is defective:

uDo not look directly into the light from close range. It

cause injury to the eyes.

The door seal is

defective or needs

to be replaced for

another reason.

→ The door seal can be replaced. It

can be replaced without the need

for special tools.

uContact Customer Service (see 6 Maintenance) :

→ The door seal may have also

slipped out of its groove.

uCheck to ensure that the door seal is seated properly in

the groove.

Malfunctions

24 * Depending on model and options

Defect Cause Remedy

The unit has iced

up or condensation

has formed.

8 Messages

Error messages and reminders are displayed by an

audible signal and a message on the screen. The

audible signal gets louder and louder when error

messages appear. It only stops when the message

is confirmed. Highest priority messages are displayed

first if several occur at the same time. Each message

must be cleared separately.

The message stays in the menu field as long as it is active

or the fault is not eliminated.

Note

Details on the message can be displayed again via the menu

field.

uPress menu.

uPress the message symbol.

uThe display switches to the next message when you

press one. After the last active message the display

switches to the home screen.

Door alarm

An audible warning sounds if the door is open for

longer than 60 seconds. The door alarm symbol

appears on the display. The audible warning stops

automatically when the door is closed.

The audible warning can be switched off when the

door is open. The audible alarm is switched off

while the door is open.

uPress the door alarm symbol.

wThe door alarm stops.

wThe display switches to the home screen.

uClose the door.

Temperature alarm

An audible signal sounds if the temperature is

not cold enough. The temperature alarm symbol

appears on the display.

Appliances with a status display: When the status

display is active and the door is closed, a red light

appears at the same time.

The temperature had risen too high during the last

few hours or days. When the fault is eliminated the

appliance continues to work at the last temperature

setting.

The reason for too high a temperature may be:

-hot, fresh food was inserted

-too much warm room air flowed in when rearranging and

removing food

-the power was cut off for a while

-the appliance is faulty

uOpen the door.

wAppliances with a status display: When the status

display is activated, the pulsing red light goes out.

uPress the temperature alarm symbol.

wThe audible signal stops. The warmest temperature

reached during the malfunction is displayed on the

screen.

uPress the screen or wait for 30 seconds.

wThe display switches to the home screen. Arrows and the

temperature alarm symbol appear in the relevant temper‐

ature field . In addition the messages symbol is

displayed in the menu field .

uCheck the food for quality. Do not consume spoiled food.

Do not re-freeze defrosted food,

uClose the door.

wThe symbols are greyed out when the target temperature

is reached.

wAppliances with a status display: While the status display

is activated, this lights up blue.

If the alarm status persists or the temperature cannot be

reset independently:

(see 7 Malfunctions) .

Power cut

An audible warning sounds. The power cut symbol

appears on the display.

The temperature had risen too high over the last

few hours or days due to a power cut or power

interruption. When the power is restored the appli‐

ance continues to work at the last temperature

setting. Activated reminders are retained.

uOpen the door.

uPress the power cut symbol.

wThe audible signal stops. The warmest temperature

reached in the freezer compartment during the power cut

is displayed on the screen.

uPress the screen or wait for 30 seconds.

wThe display switches to the home screen. Arrows and the

symbol temperature alarm appear in the relevant temper‐

ature field . The messages symbol is also shown in

the menu field .

uCheck the food for quality. Do not consume spoiled food.

Do not re-freeze defrosted food,

uClose the door.

wThe symbols are greyed out when the target temperature

is reached.

Appliance faults

An audible warning sounds. The appliance fault

symbol appears on the display with the relevant

error code.

Appliances with a status display: When the status

display is activated and the door is closed, a red

light pulses at the same time.

An appliance component indicates a fault.

uOpen the door.

uNote down the fault code.

uPress the appliance fault symbol.

wThe audible signal stops. The display switches to the

home screen.

uClose the door.

wAppliances with a status display: While the status display

is activated, this lights up blue.

uContact Customer Services (see 6 Maintenance) .

Water inlet fault

An audible warning sounds. The appliance fault

symbol appears on the display with the WATER

error code.

Messages

* Depending on model and options 25

WARNING

Leaking coolant and oil!

Fire. The coolant contained in the appliance is eco-friendly,

but also flammable. The oil contained in the appliance

is flammable. Escaping coolant and oil can ignite if the

concentration is high enough and in contact with an

external heat source.

uDo not damage the pipelines of the coolant circuit and

the compressor.

uTransport the appliance without damaging it.

uDispose of batteries, lamps and the appliance according

to the above specifications.

Disposal

* Depending on model and options 27

Messages:

There are active error messages

and reminders.

3.5 Appliance options

You can select or set the following options; explanations

and setting options, (see 5 Control) :

Symbol Option

SuperCoolx

SabbathMode

Child safety devicex

Holiday function

Temperature unit

BioFresh

x If the option is selected, the relevant symbol is displayed

in the menu field.

The symbol disappears if the option ends or is disabled.

4 Putting into operation

4.1 Transporting the appliance

uTransport the appliance only in suitable packaging.

uTransport the appliance upright.

uDo not transport the appliance on your own.

4.2 Installing the appliance

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause

short circuits.

uThe appliance is designed for use in enclosed areas. Do

not operate the appliance outdoors or in areas where it is

exposed to splash water or damp conditions.

WARNING

Improper use!

Fire. If a mains cable/plug comes into contact with the back

of the appliance, the mains cable/plug can be damaged by

appliance vibrations and this may result in a short circuit.

uStand the appliance so that it is not touched by connec‐

tors or main cables.

uDo not connect any appliances to sockets in the area of

the back of the appliance.

uMulti-sockets/power distributors and other electronic

appliances (such as halogen transformers) may not be

placed and operated at the back of appliances.

WARNING

Leaking coolant and oil!

Fire. The coolant contained in the appliance is eco-friendly,

but also flammable. The oil contained in the appliance

is flammable. Escaping coolant and oil can ignite if the

concentration is high enough and in contact with an

external heat source.

uDo not damage the pipelines of the coolant circuit and

the compressor.

WARNING

Fire hazard and danger of damage!

uDo not place appliances emitting heat e.g. microwaves,

toasters etc. on the appliance!

NOTICE

Covered vents!

Damage. Appliance can overheat, which can reduce the

service life of various parts of the appliance and lead to

operational impairments.

uAlways make sure there is good ventilation.

uAlways keep vents or ventilation grids in the appliance

housing and in the kitchen furniture (fully integrated

appliance) unobstructed.

uAlways keep the fan air vents unobstructed.

If your appliance is not a side-by-side (SBS) appliance:*

NOTICE

Risk of damage due to condensate!*

uDo not install the appliance directly alongside a further

refrigerator/freezer.

Note

If you have several appliances next to one another, leave a

gap of 70mm between appliances. Otherwise condensation

will build up between the units.*

Fig. 8 *

qBefore you connect the appliance, report any damage

immediately to the delivery company.

qThe floor of the installation site must be horizontal and

even.

qDo not install the appliance in direct sunlight, next to an

oven, radiator or similar.

qInstall the appliance with the rear panel up against the

wall and always use the supplied wall spacers (see

below).

qOnly ever move the appliance when it is empty.

qThe surface supporting the appliance must be at the

same level as the surrounding floor.

qDo not install the appliance on your own.

qThe more coolant there is in the appliance, the larger

the room in which the appliance is installed must be. If

the room is too small, any leak may create a flammable

mixture of gas and air. For each 8 g of coolant the instal‐

lation space must be at least 1 m3. Information on the

coolant is on the model plate inside the appliance.

Putting into operation

* Depending on model and options 7

Produkt Specifikationer

Mærke:	Liebherr
Kategori:	Fryser
Model:	SBSbs 8673
Vekselstrømsindgangsspænding:	220 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	1210 mm
Dybde:	600 mm
Højde:	1850 mm
Produktfarve:	Sort
Kontroltype:	Berøring
Lampe type:	LED
Indbygget skærm:	Ja
Skærmtype:	TFT
Strøm:	2.5 A
Energieffektivitetsklasse (gammel):	A+++
Årligt energiforbrug:	255 kWh
Husmateriale:	Rustfrit stål
Placering af apparat:	Fritstående
Tilsluttet belastning:	248 W
Støjniveau:	38 dB
Børnesikring:	Ja
Understøttede scanningstilstande:	- mm
Vandfilter:	Ingen
Fryser, netto rumindhold:	262 L
Fryser, brutto rumindhold:	315 L
Frysekapacitet:	18 kg/24t
Opbevaringstid under strømafbrydelse:	20 t
Klimaklasse:	SN-T
Køleskab antal hylder/kurve:	6
Antal grøntsagsskuffer:	2
Æggebakke:	Ja
Køleskab, netto rumindhold:	367 L
Total netto kapacitet:	629 L
Understøtter VPN:	726 L
No Frost (køleskab):	Ingen
Stjernebedømmelse:	4*
Fryser position:	Side-placeret
Automatisk afrimning (fryser):	Ja
Hylder, materiale:	Hærdet glas
Ismaskine:	Ja
Køleskab, brutto rumindhold:	411 L
Multi-Airflow-system (køleskab):	Ja
Flaskeholder:	Ja
No Frost (fryser):	Ja
Fryser antal hylder/kurve:	9
Åben dør alarm:	Ja
Super Cool funktion:	Ja
Frisk zone, aflukke:	Ja
Energiforbrug:	0.696 kWh/24t
Feriefunktion:	Ja
Automatisk afrimning (køleskab):	Ja
Produktdesign:	Amerikansk dør
Bredde med åben dør:	1752 mm
Dørmontering:	Dør-til-dør
Fryser, indvendigt lys:	Ja