LigoWave MACH 5 Manual


Læs nedenfor 📖 manual på dansk for LigoWave MACH 5 (4 sider) i kategorien Adgangspunkt. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
iPoll 3
Wireless Internet service provider Linkfor, operating in Belgogrod region, is a client of LigoWave‘s distributor in Russia - WMD.
Linkfor has over 3300 commercial clients in total and 345 of those clients are connected with LigoWave devices.
Linkfor recently set up a network with 72 CPEs connected to LigoDLB 5 -90 base-station with an integrated dual-polarized 90
degree sector antenna. The base station comes with a 18 dBi dual-polarized 90° sector antenna. All of the CPEs used for this
network were LigoDLB 5 – 15s. The devices were operating in iPoll 3 mode. LigoWave’s iPoll 3 PTMP (point-to-multipoint) pro-
prietary protocol is an innovative solution to eliminate transmission congestion and close cluster interference created in PTMP
wireless installations.
The throughput was measured to be between 55 and 60 Mbps with all 72 CPEs connected. Linkfor offers the following plans for
their customers: 8 Mbps, 6 Mbps and 4 Mbps. The distribution of clients with different speed plans was set as follows: 8 Mbps
for 10% of clients, 6 Mbps for 20% of clients and 4Mbps for 70% of clients.
Stats
Firmware version APCPE.QM-1.v7.54-DEVEL.17819
Mode Access point (iPoll 3)
Channel width 20 MHz
Number of connected CPEs 72 (LigoDLB 5-15)
CPE distances 10% - 2.5-3 km/1.5-1.8 miles
50% - 3-4 km/1.8-2.4 miles
40% - 4-5 km/2.4-3 miles
Customer service Internet access
The distribution of speed plans
10 %
20 %
70 %
8 Mbps 6 Mbps 4 Mbps
COPYRIGHT ©2016 LIGOWAVE
CASE STUDY


Produkt Specifikationer

Mærke: LigoWave
Kategori: Adgangspunkt
Model: MACH 5

Har du brug for hjælp?

Hvis du har brug for hjælp til LigoWave MACH 5 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Adgangspunkt LigoWave Manualer

Adgangspunkt Manualer

Nyeste Adgangspunkt Manualer