Livarno Lux IAN 292060 Manual

Livarno Lux Ikke kategoriseret IAN 292060

Læs nedenfor 📖 manual på dansk for Livarno Lux IAN 292060 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

regular intervals and before every use.

• Never open the housing and do not insert any objects into the housing.

• Only use the lamp at a wall socket so that the LEDs are pointing upwards.

• Never cover the lamp when it is in operation.

• Never touch the mains plug with wet hands.

• Keep the lamp away from naked ﬂames and hot surfaces.

• Only use the lamp inside and not in damp areas or in the rain.

• Never store the lamp in a place where it could fall into a tub or basin.

• To charge the lamp, only use the charging station provided.

• Only use the charging station provided to charge the accompanying lamp.

Scope of supply

1 LED multi-function light

1 charging adapter

1 set of operating instructions

Technical data

• Front lamp [1]: 10 x LEDs (non-replaceable) / approx. 35,000 mcd /

60 - 80 lumens* per LED with fully charged battery / life of LED approx.

30,000 h

• Side lamp [3]: 6 x LEDs (non-replaceable)

• Front lamp burn time [1]: 2,5 - 3 h*

• Front lamp burn time [3]: 4 h*

• Battery: 1 x 500 mAh, 3.7 V lithium ion battery (non-replaceable)

• Charging station input: 230 V , 50 Hz, 1 W~

• Movement sensor: Approx. 2 m*

*according to ANSI test criteria

Before initial operation

The integrated battery has already been charged. Despite this, the battery must

be charged for 24 hours before ﬁrst use.

Charging the battery

Switch off the multifunctional LED lamp before beginning charging. Then insert

the plug [5] of the charging station [6] - with the lamp inserted - into an easily

accessible wall socket with a voltage of 230 V and a frequency of 50 Hz. ~

Be careful to ensure that you align the charging station and lamp correctly - see

Figure.

Now leave the battery for 24 hours to charge. Note: For every subsequent

charge, the charging time (maximum 24 hours) should be calculated according

to the remaining capacity of the battery.

Once the charging station [6] with inserted lamp [2] is connected to the mains,

the battery is charged contactlessly. The integrated automatic charging system

prevents the battery from overcharging. The lamp [2] can remain in the charging

station [6] constantly.

Use of the sensor function

Connect the charging station [6] with inserted lamp [2] to the mains. If movement

is sensed within a range of up to two metres and providing it is dark, the side

lamp [3] will switch on automatically. After approximately 20 seconds (+/- 5

seconds), it will switch off again automatically.

Use of the torch function

Remove the lamp [2] from the charging station [6]. The front light [1] will switch

on automatically in eco mode. By repeatedly pressing the on/off switch [4] you

can move between the following operating modes: 100% mode [1], side light

[3] or ﬂashing mode [1]. Push the switch [4] again to turn off the lamp.

Use of the emergency light function

Connect the charging station [6] with inserted lamp [2] to the mains. If the power

fails, then the front lamp [1] will switch automatically into eco mode, which

provides light for orientation. As soon as the socket is live again, the front light [1]

turns off. Note: If the electricity supply remains off, then the front light [1] is illumi-

nated until the battery runs out - up to two hours if the battery is fully charged.

Cleaning and care

Clean the product only with a dry lint-free cloth.

Environmental protection / disposal instructions /

legend

Hand in the product only at a collection point for electrical refuse. Bat-

teries do not belong in household waste! Please hand in batteries and/

or the appliance via available collection facilities. The disposal of old

equipment does not take place via the sales outlet.

The packaging consists of environmentally friendly materials which can

be disposed of through local recycling points.

The insert is made of cardboard (PAP 21).

The blister packaging is made of plastic (PET 01).

Reminds consumers to dispose of products and packaging in an environ-

mentally friendly manner.

Declaration of conformity: Products marked with this symbol fulﬁl all ap-

plicable community rules of the European Economic Area.

Products marked with symbol may only be used indoors (only for

charging station).

This symbol designates electrical devices complying with protection

class II (only for charging station).

Tested safety (only for charging station): Products marked

with this symbol comply with the requirements of the German

Product Safety Act (ProdSG).

LED MULTI-FUNCTION LIGHT

Intended use

Congratulations on the purchase of your new device. You have acquired a high-

quality product. The operating instructions are a component of this product. They

contain important information on safety, use and disposal. Familiarise yourself

with all operating and safety information before using the product. Only use the

product as described and for the declared uses. This product is intended only for

private, non-commercial use. If you give the product to a third party, also provide

them with all documents.

This LED lamp is not suitable for household room illumination.

• This light is a special product due to the colour value elements

X < 0,270

Y < -2,3172 x² +2,3653 x -0,2199

Safety instructions and warnings

LED: Do not look directly into the light, or direct the torch into the eyes of

other people. This may lead to vision impairment. Switch off the product

when not in use and place in the charging station. Always keep the product and

packaging out of the reach of children. The product is not a toy. We accept no

liability for personal or material damage caused by incorrect use or by failure to

comply with these operating instructions. In such cases, any guarantee claim is

nulliﬁed. Do not use the lamp if its plastic components are cracked or deformed.

WARNING! Danger of explosion! Batteries can explode if subjected

to high temperatures.

• Do not use the charging station and the lamp in areas which are ﬂammable

or explosion-prone.

WARNING! Risk of short circuit! Water which has penetrated the hous-

ing could cause a short circuit.

• Do not immerse the product in water or other liquids.

WARNING! Danger of injury! Incorrectly handling the lamp could lead

to injury.

• Before all cleaning and maintenance work, disconnect the lamp and the

charging station from the electricity supply.

• Cleaning and user maintenance must not be carried out by children unless

they are under supervision.

• Do not use any cleaning agents which contain carboxylic acid, petrol,

alcohol or similar. These agents attack the surface of the devices and the

vapours are harmful and explosive.

WARNING! Risk of electric shock! Incorrect electrical installation or too

high a mains voltage could cause an electric shock.

• Connect the lamp to a properly ﬁtted socket with a voltage of 230 V and ~

a frequency of 50 Hz.

• Only connect the lamp to an easily accessible socket so you can discon-

nect it from the mains quickly in the case of a fault.

• Do not connect the lamp to a socket strip or a multiple socket.

• Do not use the lamp if you can see it is damaged or the mains plug is

defective. Check the lamp for damage to the housing and mains plug at

Guarantee

This product is covered by a three-year warranty for time and materials from the

date of purchase and a six-months warranty for wear parts and consumables

in the case of normal and proper use (e.g. batteries). This guarantee does not

apply to products which are used incorrectly, modiﬁed, neglected (including

normal wear), damaged by accident or abnormal operating conditions, or are

handled incorrectly. For a claim under guarantee, the appliance together with

proof of purchase and a brief description of the fault are to be sent to Mellert

SLT. If there is no proof of guarantee, repairs will be carried out only against

payment.

BUREAU

VERITAS

PET

LED-MULTIFUNKTIONSLEUCHTE

Bestimmungsgemäßer Gebrauch

Herzlichen Glückwunsch zum Kauf Ihres neuen Gerätes. Sie haben sich für

ein hochwertiges Produkt entschieden. Die Bedienungsanleitung ist Bestandteil

dieses Produkts. Sie enthält wichtige Hinweise für Sicherheit, Gebrauch und

Entsorgung. Machen Sie sich vor der Benutzung des Produkts mit allen Bedien-

und Sicherheitshinweisen vertraut. Benutzen Sie das Produkt nur wie beschrieben

und für die angegebenen Einsatzbereiche. Das Produkt ist lediglich für den

privaten und nicht für den gewerblichen Gebrauch bestimmt. Händigen Sie alle

Unterlagen bei Weitergabe des Produkts an Dritte mit aus.

Diese LED-Lampe ist nicht für die Raumbeleuchtung im Haushalt

geeignet.

• Bei dieser Lampe handelt es sich um ein Spezialprodukt auf Grund der

Farbwertanteile

X < 0,270

Y < -2,3172 x² +2,3653 x -0,2199

Sicherheits- und Warnhinweise

LED: Nicht direkt ins Licht blicken oder Leuchte auf die Augen anderer

Menschen richten. Dies kann zur Beeinträchtigung der Sehkraft führen.

Produkt bei Nichtgebrauch ausschalten und in der Ladestation platzieren. Halten

Sie Kinder stets vom Produkt und der Verpackung fern. Das Produkt ist kein Spiel-

zeug. Bei Sach- od. Personenschäden, die durch unsachgemäße Handhabung

od. Nichtbeachten dieser Bedienungsanleitung verursacht werden, übernehmen

wir keine Haftung! In solchen Fällen erlischt jeder Garantieanspruch. Verwenden

Sie die Lampe nicht, wenn die Kunststoffbauteile der Lampe Risse oder Sprünge

aufweisen oder sich verformt haben.

WARNUNG! Explosionsgefahr! Akkus können explodieren, wenn sie

stark erhitzt werden.

• Verwenden Sie die Ladestation und die Lampe nicht in leicht entﬂammbarer

oder explosionsgefährdeter Umgebung.

WARNUNG! Kurzschlussgefahr! In das Gehäuse eingedrungenes

Wasser kann einen Kurzschluss verursachen.

• Produkt nicht in Wasser oder andere Flüssigkeiten tauchen.

WARNUNG! Verletzungsgefahr! Fehlerhafte Handhabung der Lampe

kann zu Verletzungen führen.

• Trennen Sie die Lampe und die Ladestation vor allen Reinigungs- und War-

tungsarbeiten von der Stromversorgung.

• Reinigung und Benutzerwartung dürfen nicht von Kindern ohne Beaufsichti-

gung durchgeführt werden.

• Verwenden Sie keine Reinigungsmittel, die Carbonsäure, Benzin, Alkohol

oder ähnliches enthalten. Diese Mittel greifen die Oberﬂäche der Geräte

an und die Ausdünstungen sind gesundheitsschädlich und explosiv.

WARNUNG! Stromschlaggefahr! Fehlerhafte Elektroinstallation oder

zu hohe Netzspannung können zu einem elektrischen Stromschlag führen.

• Schließen Sie die Lampe an eine ordnungsgemäß installierte Steckdose mit

230 V , 50 Hz an.~

IE NI

[1]

[2]

[3]

[5]

[6]

[4]

LED MULTI-FUNCTION LIGHT

LED-MULTIFUNKTIONSLEUCHTE

Bedienungsanleitung

IAN 292060 1 - 2

LED MULTI-FUNCTION LIGHT

Operating instructions

Produkt Specifikationer

Mærke:	Livarno Lux
Kategori:	Ikke kategoriseret
Model:	IAN 292060

Har du brug for hjælp?

Hvis du har brug for hjælp til Livarno Lux IAN 292060 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Livarno Lux Manualer

Livarno Lux HG06007A Manual

17 November 2024

Livarno Lux HG01752B Manual

17 November 2024

Livarno Lux IAN 386651 Manual

17 November 2024

Livarno Lux Z29970 Manual

17 November 2024

Livarno Lux 55895 Manual

17 November 2024

Livarno Lux IAN 386650 Manual

17 November 2024

Livarno Lux IAN 436090 Manual

19 September 2024

Livarno Lux IAN 451322 Manual

5 September 2024

Livarno Lux IAN 439088 Manual

5 September 2024

Livarno Lux HG08597A Manual

5 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

26 November 2024

26 November 2024

26 November 2024

26 November 2024

AOpen Media Engine ME57U Manual

26 November 2024

AOpen Chromebox Mini ME4100 Manual

26 November 2024

AOpen DE3129 Manual

26 November 2024

AOpen DE35-HD Manual

26 November 2024

AOpen DE3650-S Manual

26 November 2024

AOpen Chromebase Mini WT10M-FRG Manual

26 November 2024