Macrom M-DVD6560 Manual
Macrom
Multimedier
M-DVD6560
Læs nedenfor 📖 manual på dansk for Macrom M-DVD6560 (28 sider) i kategorien Multimedier. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/28
USER MANUAL
M-DVD6560
M-DVD6560 User manual_ENG.indd 1 23/05/2014 14:36:25
- 1 -
Safety Precautions
Never expose this unit, amplifier, and
speakers to moisture or water to prevent
electric sparks or fire.
Please don't change the fuse on the power
cord without professional guidance, using
improper fuse may cause damage to this unit
or even cause fire.
Please contact your nearest dealer if one of
the following symptoms is experienced:
(a). Water or other objects enters the unit.
(b). There is smoke.
(c). Peculiar smell.
Only connect the unit to a 12-volt power
supply with negative grounding.
MUTE
OK
MUTE
OK
Never install this unit where the operation &
condition for safe driving is impaired.
Never use the video display function in the
front when driving to prevent the violation of
laws & regulations and also to reduce the
risk of traffic accident except for using rear
view video camera.
MUTE
OK
MUTE
OK
MUTE
OK
MUTE
OK
Thank you for purchasing this product. Please
read through these operating instructions
so you will know how to operate your model
properly. After you’ve finished reading the
instructions, keep this manual in a safe place
for future reference.
To ensure safe driving, please adjust the
volume to a safe and comfortable level in
case of emergency situations.
M-DVD6560 User manual_ENG.indd 1 23/05/2014 14:36:25
- 2 -
1. Never disassemble or adjust the unit without any professional guidance.
For details, please consult any professional car shop / dealer for inquiry.
2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent
to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning
may result in scratching or decoloration to the monitor.
3. If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this
manual. If no relevant information is found, please press the [RESET] key on the front panel to
resume factory default.
4. If you have parked the car in hot or cold weather for a long time, please wait until the
temperature in the car becomes normal before operating the unit.
5. Using the car heater in low temperature environment may result in moisture inside the unit, DO
NOT use the unit in this situation. Eject the disc and wipe off the moisture on the disc. If the unit
still doesn't work after a few hours, please contact the service center.
6. Do not impact the LCD monitor which could cause damage.
7. To prevent damage to the screen, avoid touching it with sharp objects.
8. To provide a clear demonstration and an alternative for easy understanding to the operation of
this unit, graphic illustrations are used.
However, some illustrations are different from the actual images displayed on the screen.
9. Operate the unit correctly according to this manual to prevent unnecessary problem. The
guarantee won't be valid if the problem is caused by inappropriate operation.
Safety Precautions
M-DVD6560 User manual_ENG.indd 2 23/05/2014 14:36:26
- 3 -
Contents
Safety Precautions ....................................1-2
Contents ........................................................ 3
Produc overview ........................................... 4
Front Panel ............................................... 4
Basic Operations .......................................... 5
Detect parking brake................................ 5
Mute .......................................................... 5
Power On / Off .......................................... 5
Audible Beep Confirmation ...................... 5
Playing Source Selection ......................... 5
EQ Menu.................................................... 6
Select Preset Equalizer ............................ 6
Adjust EQ Parameters .............................. 6
Adjust FAD BAL ....................................... 6
Set Date .................................................... 7
Set Clock Mode ......................................... 7
Set Time .................................................... 7
Radio Mode ................................................... 8
Tuner TFT Display .................................... 8
Select Radio as Playing Source ............... 8
Select One Radio Band ............................. 8
Tune the radio........................................... 8
Preset Station ........................................... 9
local Seeking ............................................ 9
RDS Basics ............................................... 9
Adjust RDS Settings ................................. 9
RDS ( Radio Data System ) ..................... 10
AF Function ............................................. 10
EON ( Enhanced Other Networks ) ........ 10
TA Function ............................................. 10
CT (Clock Time) ...................................... 10
PTY Function ........................................... 10
Playback Mode ........................................... 11
Load a Disc ............................................. 11
Eject a Disc ............................................. 11
Touch Screen Controls .......................... 11
Controlling Playback .............................. 11
Connect a USB Device ............................ 11
Remove a USB Device ............................ 11
Play/Pause .............................................. 11
Previous/Next ......................................... 11
Search for a Folder ................................ 12
Repeat ..................................................... 12
Repeat A-B ............................................. 13
Shuffle (Random) Play ............................ 13
Select Audio Mode .................................. 13
Select Subtitle Language ....................... 13
Playback Information ............................. 14
Direct Track Entry .................................. 14
Rotate Pictures ....................................... 14
Zoom ....................................................... 14
Video Setup ............................................. 14
Bluetooth Mode .......................................... 15
Pair the Bluetooth-enabled Devices...... 15
Disconnect Bluetooth Device ................. 15
Make a Call ............................................. 15
Receive a Call ......................................... 16
Adjust Bluetooth Settings ...................... 16
Bluetooth Musci Mode ........................... 16
Settings ....................................................... 17
General settings ..................................... 17
Calibration .............................................. 17
Video settings ......................................... 17
Sound settings ........................................ 18
Time settings .......................................... 18
Language settings .................................. 18
Bluetooth settings .................................. 18
DVD settings ........................................... 19
Volume settings ...................................... 19
Other Modes ............................................... 20
Other Devices ......................................... 20
Reset ....................................................... 20
Replace a Fuse ....................................... 20
Navigation (GPS) ..................................... 20
SWC Programming ................................ 20
Specifications ............................................. 21
Region Code ........................................... 22
Cautions when using Discs .................... 22
Troubleshooting ......................................... 23
Wire Connections ....................................... 24
M-DVD6560 User manual_ENG.indd 3 23/05/2014 14:36:26
- 4 -
Front Panel
1. Disc slot.
2. [ ] Knob
Rotate to adjust the volume.
Press to turn the unit ON. Press and
hold to turn the unit OFF.
3. [MENU] Button
Press to switch between the available
audio/video sources applied to the unit.
4. [PIC] Key
Press [PIC] repeatedly to adjust screen
brightness.
Press and hold [PIC] to turn off the display.
5. [TILT+] Knob
Increase the display angle
6. [OPEN/CLOSE] Key
Open / Close the TFT monitor
7. [TILT-] Knob
Decrease the display angle
Product overview
Notice:
The graphic in this manual is for reference only, and may be different from the actual unit.
1
2
39
8. [MUTE] Key
Press briefly to activate the MUTE
function. Press again to resume
normal sound.
9. Reset
Load the original settings.
10. USB connector
Connect an USB device for playback of
music/video/picture files.
11. Map card slot
The MicroSD card slot is used for the
Navigation Map, not for music or other files.
12. AV IN
Accepts a 3.5mm jack through which
signals from various audio/video
devices can be applied to the unit.
13. Remote sensor
14. [ ] Key Eject disc
4 5 6 7 8 10
11
12
13
14
M-DVD6560 User manual_ENG.indd 4 23/05/2014 14:36:26
- 5 -
Detect parking brake
• Connect the cable "BRAKE" to the parking brake switch to view video files on the TFT monitor.
Engage the parking brake for viewing videos.
• When the parking brake is not engaged, the monitor displays "Warning!!!, Video playback is
disabled for your safety. Engage parking brake to watch video.", preventing the driver to watch
content while driving. The rear screens are not interested in this inhibition.
Mute
Press the [MUTE] button on the front panel or the [ ] button on the remote control to mute the
volume from the unit. Press again to restore the volume. Adjusting the volume or using any of the
audio setup features cancels the mute function.
Power On / Off
Press the [ ] knob on the unit (or the [ POWER ] button on the remote control) to turn the unit on.
The buttons on the front of the unit light up for a moment and the last working mode appears on
the screen.
Press the [ ] knob again to turn off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be disabled through the
Setup menu.
Playing Source Selection
Press the [ MENU ] button on the front panel or the [ SRC ]
button on the remote control to display the playing source menu.
1. or : Touch to view the previous or next page of playing sources.
2. Playing source icon: Touch to access corresponding work mode.
3. Clock/Date
4. EQ: Touch to access Equalizer level settings menu.
Basic Operations
M-DVD6560 User manual_ENG.indd 5 23/05/2014 14:36:26
123 4 1
- 6 -
Select Preset Equalizer
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the
EQ setup interface will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ Optimal ] /
[ Classic ] / [ Rock ] / [ Jazz ] / [ Techno ] / [ Pop ],
and the EQ mode will change.
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the parameters adjustment bar.
[ User ]: Set the desired audio effect.
[ Flat ]: Select the original audio effect.
[ Reset ]: Cancel the equalizer function settings.
[ Loud: On/Off ]: When listening to music at low volumes, this featurewill selectively boost certain
bass and treble frequencies.
Adjust FAD BAL
You can adjust front/back/left/right balance of the speaker and the subwoofer volume to get
balanced listening effect according to the surroundings and your interest.
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the EQ
setup interface will display on the screen.
2. Adjust subwoofer volume
Touch [ ] / [ ] or drag [ ] to adjust subwoofer
volume from -12 to +12.
3. Adjust fader / balance value
Touch [ ] / [ ] / [ ] / [ ] to adjust fader /
balance value from -20 to +20.
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
Basic Operations
EQ Menu
The Audio Control feature allows you to easily adjust your audio system to meet the acoustical
characteristics of your vehicle, which vary depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.
Notes:
1. The parameters of the EQ modes has been preset and you can not change them besides ‘User’.
2. The EQ mode will change to ‘User’ automatically when you adjust the frequency value under the
modes besides ‘User’.
3. The value of Sub is independent of EQ mode and can be adjusted separately.
M-DVD6560 User manual_ENG.indd 6 23/05/2014 14:36:27
- 7 -
Setting Date /Time
1. Touch [ Settings].
2. Touch [ Time ].
The date/time setup menu is displayed.
Set Date
1. Touch [ Date ].
2. Touch the date information on the screen .
A submenu is displayed.
3. Touch [ ] or [ ] to set year, month and day.
Set Clock Mode
1. Touch [Clock mode].
2. Touch [12Hr] or [24Hr] to switch clock mode.
Set Time
1. Touch [ Time ].
2. Touch the time on the screen, a submenu is displayed.
3. Touch [ ] or [ ] to set hour and minute.
4. When date/time is set, touch [ Save ] to confirm or [ Cancel ] to exit.
M-DVD6560 User manual_ENG.indd 7 23/05/2014 14:36:28
- 8 -
Select Radio as Playing Source
Open the Source Menu and then touch [Radio].
Select One Radio Band
Touch the [ ] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and
AM2.
Tune the radio
Auto Tunig
During auto tuning, the frequency will be changed in seek mode.
Touch the [ ] / [ ] icon on the user interface to tune in a higher / lower station.
Note: When a station is received, searching stops and the station is played.
Manual Tuning
Method 1:
Touch and hold [ ] / [ ] icon on the user interface more than 1 second to changed in steps
higher / lower station. Repeat the operation to change step by step.
Method 2:
1. Touch the numeric keypad icon [ ].
Numeric keyboard is displayed, touch number to
input frequency.
2. Touch [ ] to delete the input number step by step.
3. Touch [ OK ] to enter.
Radio Mode
1. Touch to view the MENU and select a new
playback source
2. Strong Local signal broadcasting indicator
3. Stereo broadcasting indicator
4. Current radio band indicator
5. Broadcaster information stored at the preset
6. Touch to view more on-screen buttons
7. Touch to seek backward
8. Touch for quick access to EQ level settings
9. Touch to seek forward
10. Touch to change between AM/FM bands
11. Clock
12. Current preset radio station
13. Current radio information
14. AF: Alternative Frequency indicator
15. TA: Traffic Announcement indicator
16. RDS setting options
17. Save the desired radio station
18. Touch to change between Local and Distance
19. Enter frequency directly
20. Search stations automatically
Tuner TFT Display 1 2 3 4
11
12
13
14
15
5
6
7 8 9 10
TA
16 17 18 19 20
M-DVD6560 User manual_ENG.indd 8 23/05/2014 14:36:30
- 9 -
Local Seeking
Touch the [ ] icon and choose the Radio Local or Distance.
When the [ ] icon turns bright, only stations with a strong signal strength will be detected .
Default is “Distance”.
EQ Selection
Press the [ ] icon and enter the EQ setup.
RDS Basics
RDS transmits data to the radio which displays information such as name station, song artist, and
song title.
RDS service availability varies with areas.
Adjust RDS Settings
1. In Radio menu, touch [ ].
The option menu is displayed.
2. Touch on the selected option to change the setting.
[RDS]: To turn on or off “RDS” function.
[CT]: To turn on or off “Clock Time” synchronization function.
[EON]: To turn on or off “EON” function.
[TA]: To turn on or off “TA” function.
[PTY]: To show PTY list.
[ VOL]: Touch [ ] / [ ] to adjust TA volume.
Radio Mode
Preset Station
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6 stations; the
unit can store 30 stations in total.
Search Stations Automatically
Touch [ ] to search station and store 6 strongest
stations in current band automatically.
Manual Store
1. Tune to a station.
2. Touch [ ].
3. Touch one of the channels P1 to P6 to save the select
band.
Tune to a Preset Station
1. Touch [Radio].
2. Select a band (if needed).
3. Touch one of the preset channels (P1 to P6) on the
screen.
M-DVD6560 User manual_ENG.indd 9 23/05/2014 14:36:31
- 10 -
RDS ( Radio Data System )
The unit provides basic functions of RDS.
RDS service availability varies with areas. Please verify if RDS service is available in your area.
AF Function
Alternative Frequencies Lists are used in conjunction with the PI code (Program Identification
code)to assist automatic tuning.
Using this information, the radio can automatically search out another frequency of the same
station.
Note:
• During auto switching radio frequency, some interference may be heard..
• Turning off AF function can settle this problem.
EON ( Enhanced Other Networks )
When EON data is received, the EON indicator lights and the TA and AF functions are enhanced.
TA: Traffic information can be received from the current station or stations in other network.
AF: The frequency list of preset RDS stations is updated by EON data. EON enables the radio to
make fuller use of RDS information. It constantly updates the AF list of preset stations, including
the one that currently tuned into.
TA Function
The TA (Traffic Announcement) function lets the unit receive traffic announcements automatically.
The TA function can be activated by a TP (Traffic Program) station broadcasting traffic information.
When TA is activated and a traffic announcement is received, the current playing source will be
overridden by the traffic announcement The unit returns to the original source after the traffic
announcement has been received.
CT (Clock Time)
Some stations broadcast the time and date within the encoded RDS signal. The clock time is
automatically adjusted when ‘CT’ is set to ‘ON’.
PTY Function
PTY is an abbreviation for the type of program defined by a code to define the program being
broadcast (eg news or Rock).
The Options of PTY is displayed on the screen. To see the options PTY, tap the scroll bar and arrows
on the screen.
When an option is selected PTY (eg News), the radio unit, the PTY search available. If the PTY
requested was not found, the unit returns to the original radio frequency.
Radio Mode
M-DVD6560 User manual_ENG.indd 10 23/05/2014 14:36:31
- 11 -
Load a Disc
You can play video, audio or images stored on the following discs:
• DVD Video, DVD-R, DVD-RW
• VCD
• Audio CD, CD-R, CD-RW
Note:Ensure that the disc contains playable content.
Eject a Disc
Press the [ ] key on the front panel to eject the disc. When the disc is ejected, the unit switches to
the previous source.
Touch Screen Controls
The touch key areas for DVD playback are outlined below:
A: Return to the main menu
B: Play the video and display playback information
C: Display onscreen control menu
D: Time display
Controlling Playback
To access the on-screen controls, touch the screen except upper left corner, and touch again to
cancel display. Touch [ ] to view all function icons.
Connect a USB Device
1. Open the USB door.
2. Insert the small end of the USB cable to mini USB socket, then connect the other end of the
cable to your USB device.
Remove a USB Device
1. Select other source on the main menu.
2. Remove the USB device.
Play/Pause
1. Once a disc, USB or SD/MMC card is inserted, play starts automatically.
For DVD movie, if a menu appears, press [ ] to start play.
2. To pause, touch [ ].
To resume play, touch [ ].
3. Skip to previous / next track / chapter, press [ ] / [ ] key.
Previous/Next
Touch [ ] / [ ] key on the screen to skip to previous / next track / chapter.
Playback Mode
M-DVD6560 User manual_ENG.indd 11 23/05/2014 14:36:31
B
C
A
- 12 -
Search for a Folder
For Audio Files
1. Touch [ ] to display all available audio folders.
2. Touch a folder,then touch the desired file.
3. Touch the file again to start play.
For Video Files
1. Touch [ ] to display all available video folders.
2. Touch a folder,then touch the desired file.
3. Touch the file again to start play.
For Picture Files
1. Touch [ ] to display all available picture folders
2. Touch a folder,then touch the desired file.
3. Touch the file again to start play.
For Folder Control
1. Touch [ ] to display all available folders
2. Touch a folder,then touch the desired file.
3. Touch the file again to start play
Repeat
For DVD/VCD movie disc:
1. Touch bottom half of the screen to display menu on the
screen.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select:
DVD
[ ] Repeat chapter: Play the current chapter
repeatedly.
[ ] Repeat title: Play all chapters in the title repeatedly.
[ ] Repeat off: Play all in the all repeatedly.
[ ] Repeat off: Cancel repeat play.
VCD
[ 1 ] Repeat single: Play the current single repeatedly.
[ ] Repeat all: Play all in the all repeatedly.
[ ] Repeat off: cancel repeat play.
Playback Mode
M-DVD6560 User manual_ENG.indd 12 23/05/2014 14:36:32
- 13 -
For CD/MP3 files:
1. Touch anywhere except the upper left corner to display menu on the screen.
2. Touch [ ] repeatedly:
[ 1 ] Repeat single: Play the current single repeatedly.
[ ] Repeat all: Play all in the all repeatedly.
[ ] Repeat off: Cancel repeat play.
Repeat A-B
You can repeat a specific of video file (from A to B).
1. Touch the screen to display control menu, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ A-B ] repeatedly to mark:
Repeat A-: the start of the section to repeat.
Repeat A-B: the end of the section to repeat.
The selected section plays repeatedly.
4. To exit A-B repeat mode, touch A-B repeatedly, [Repeat A-B off] is displayed.
Shuffle (Random) Play
You can play audio tracks/files in random order.
1. Touch the screen to display control menu, if necessary.
2. Touch [ ] to display the 2nd menu, if necessary.
3. Touch [ ] on the screen repeatedly to turn random play on or off.
Select Audio Mode
When you play VCDs, you can select an audio mode (R/L/Stereo).
1. During play, touch bottom half of the screen to display menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
Touch [ ] repeatedly until the audio mode is selected.
Select Subtitle Language
For DVD or Divx discs that contain two or more subtitle languages.
1. During play, touch the screen to display menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select a language.
The selected language is displayed.
Playback Mode
M-DVD6560 User manual_ENG.indd 13 23/05/2014 14:36:32
- 15 -
You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also
listen to music from a Bluetooth-enabled device.
Bluetooth Mode
Pair the Bluetooth-enabled Devices
To connect your Bluetooth device to the unit, you need to
pair the device to the unit. Pairing needs only to be done
once. You can pair up to five devices.
1. Turn on the Bluetooth function on the device.
2. Touch [ ] to search for Bluetooth device with the unit.
3. Start scanning on the Bluetooth device and select the
unit “M-DVD6560”
4. Enter default password “0000”.
Tip:
• The operational range between this unit and a Bluetooth device is approximately 5 meters .
• Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth
capabilities of the device.
• Compatibility with all Bluetooth device is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operational range.
• Keep this unit away from any other electronic device that may cause interference.
Disconnect Bluetooth Device
To disconnect one device, touch [ ] .
Tip
• The device will also be disconnected when the device is moved beyond the operational range.
• If you want to reconnect the device to the unit, place it within the operational range.
• If you do not want to reconnect the device to the unit automatically, touch [ ],
then set [ Auto connect ] to [ Off ]. For details, see the “Adjust Bluetooth Settings” section.
Make a Call
1. Select Bluetooth function in the home menu.
2. Pair the phone with the unit.
3. Search for phone number from the following list:
[Phone Book]
[Call Log]
[Missed calls]
[Received calls]
[Dialed calls]
Or touch the number pad directly, then touch [ ] to dial.
M-DVD6560 User manual_ENG.indd 15 23/05/2014 14:36:34
Produkt Specifikationer
| Mærke: | Macrom |
| Kategori: | Multimedier |
| Model: | M-DVD6560 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Macrom M-DVD6560 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Multimedier Macrom Manualer
25 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
Multimedier Manualer
- Multimedier Toyota
- Multimedier Opel
- Multimedier Mazda
- Multimedier Audi
- Multimedier Panasonic
- Multimedier Pioneer
- Multimedier Mitsubishi
- Multimedier Kenwood
- Multimedier Volvo
- Multimedier Auna
- Multimedier Skoda
- Multimedier JVC
- Multimedier EnVivo
- Multimedier Maginon
- Multimedier Ford
- Multimedier Zenec
- Multimedier Saab
- Multimedier Kia
- Multimedier Renault
- Multimedier Dual
- Multimedier Albrecht
- Multimedier JL Audio
- Multimedier Renkforce
- Multimedier Audiovox
- Multimedier Xomax
- Multimedier Marquant
- Multimedier Tokai
- Multimedier Autovision
- Multimedier Lanzar
- Multimedier VDO Dayton
- Multimedier Harley Davidson
- Multimedier Phonocar
- Multimedier Bullit
- Multimedier Eonon
- Multimedier Mercedes
- Multimedier Truckmate
- Multimedier Super
- Multimedier ESX - Car Media Systems
- Multimedier Eurologics
Nyeste Multimedier Manualer
11 Januar 2025
22 September 2024
18 September 2024
17 September 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
26 August 2024
26 August 2024