Marmitek IRC BL 1 Manual

Marmitek Ikke kategoriseret IRC BL 1

Læs nedenfor 📖 manual på dansk for Marmitek IRC BL 1 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 40 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Technical Specifications

The IR extender cable receives infrared commands from the IR Module and

converts these into infrared signals via the IR blaster LED. Install this product

according the user manual of your main product (see www.marmitek.com).

IR extender cable with 1 blaster LED

Connection: 3.5mm jack plug (mono)

IR LEDs: 1x IR blaster LED

Length of cable: 3 meters

IR transmitting range: 2 meters, sensor in a line of sight

IR transmitting angle: 90° (+45°/-45° from centre)

Dimensions: 22 x 12 x10mm

Copyrights

Marmitek is a trademark of Pattitude BV | IRC Blaster 1 LED™ is a trademark of Marmitek BV. All

rights reserved.

numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the

Content, but without limitation, distribution, reproduction, modification, display or transmission

without the prior written consent of Marmitek is strictly prohibited. All copyright and other

proprietary notices shall be retained on all reproductions.

Environmental Information for Customers in the European Union

European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging

must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed

of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and

electronic equipment via designated collection facilities appointed by the government or local authorities. Correct

disposal and recycling will help prevent potential negative consequences to the environment and human health. For more

detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or

the shop where you purchased the product.

IR blaster LED installation

(1) With a correct placement one blaster LED can operate all A/V devices placed

in the same compartment.

(2) In some situations it is necessary to place a second blaster LED if not all A/V

devices can be operated with one blaster LED.

(3) Or you place the blaster LED on one of the A/V devices in the middle of the

cabinet and the other equipment will be operated as well by the reflection of the

infrared signal.

(1) (2) (3)

Produkt Specifikationer

Mærke:	Marmitek
Kategori:	Ikke kategoriseret
Model:	IRC BL 1
Bredde:	22 mm
Dybde:	12 mm
Højde:	10 mm
Produktfarve:	Sort
Produkttype:	IR kildekabel
Kabellængde:	3 m
3,5 mm stik:	Ja
Kapabilitet:	IR Control 10, 10 XTRA, 11 XTRA