Martin ELP Zoom Lens Manual

Martin Lettelse ELP Zoom Lens

Læs nedenfor 📖 manual på dansk for Martin ELP Zoom Lens (1 sider) i kategorien Lettelse. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
ELP ZOOM LENS
Installation and Safety Manual
Installation
1. Rotate zoom lens (1) 45 degrees from home position and connect to the ELP body*
2. Rotate zoom lens (2) back to secure to the ELP body into home position.
3. Tighten the screws (3) and (4) to lock into position.
4. Tighten screws (5) at both sides to prevent sideways . movement
*Home position is identified by the Martin logo positioned on the side of the zoom lens as shown in the diagram above
Securing with a safety cable
Secure the fixture with a safety cable (or other secondary attachment) that is approved for the
weight of the fixture so that the safety cable will hold the fixture if the primary attachment fails.
Loop the safety cable through the attachment eye at the rear of the fixture and at the front of
the lens tube (see illustration below) around a secure anchoring point.
If a safety cable attachment point becomes damaged or deformed, do not use the fixture.
Return it to a Martin Service Centre for repair.


Produkt Specifikationer

Mærke: Martin
Kategori: Lettelse
Model: ELP Zoom Lens

Har du brug for hjælp?

Hvis du har brug for hjælp til Martin ELP Zoom Lens stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse Martin Manualer

Lettelse Manualer

Nyeste Lettelse Manualer