Media-Tech Pencam Manual


Læs nedenfor 📖 manual på dansk for Media-Tech Pencam (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Introduction
MT4032 is a cutting-edge camera built-in a pen. You can
take pictures, save video les with sound, use it as a we-
bcam in Skype. Files are stored on microSD ashcard, you
can download them directly from  ashcard or through
pen connected by USB cable.
Note! Before  rst use fully charge the device.
Charging
Unscrew the pen in half of its length. Use included USB
cable to plug it to USB port in PC computer. During charg-
ing red LED is blinking, when fully charged red LED is on
constantly. After charging unplug USB cable and screw
together both parts.
Installing microSD card
Unscrew the pen in half of its length. Put microSD into card
slot, note that  ashcard connection pins should facing
mini USB port. Now screw together both parts.
Using pen
To make notes twist on silver ending of pen, after use twist
o to hide pen inside.
Switching modes
Press and hold ON/OFF button for about 2 sec, green LED
indicator will be on constantly. Device is now in snapshot
mode.
Next press and hold ON/OFF button for about 2 sec, green
LED indicator will blink 3 times. Device is now in video
mode and will record video  le instantly.
Next press and hold ON/OFF button for about 2 sec, green
LED indicator will blink once and go o . Device is now in
o mode.
Note! If no action is taken within 30 sec from switching
mode the device will automatically go to o mode.
Taking pictures
When device is in snapshot mode press shortly ON/OFF
button. Every time you press it the device is saving picture
on microSD card.
Recording video
When you have switched from snapshot mode to video
mode the device will record video instantly. To stop record
press shortly ON/OFF button. To start recording next video
le press again ON/OFF button - green LED indicator will
blink 3 times to con rm recording next  le.
Connecting to PC computer
Data storage mode
When MT4032 is in o mode unscrew the pen and con-
nect it to the PC computer using USB cable included in
package. System will automatically install the device as an
USB mass storage device. You can copy all  les from pen to
windows desktop. During data transfer green LED indica-
tor is blinking.
Webcam mode
Insert software disk into CD-ROM drive and run driver in-
stallation. When nished turn MT4032 into on mode and
plugged to PC using USB cable. Windows will install new
capture video device. In webcam mode only video is ena-
bled, microphone function is disabled – use external input
audio device for skype calls.
Setting data and time
To set actual date and time you need to copy  le “time.txt”
to root folder of MT4032 in data storage mode. Copy “time.
txt” from software disc to desktop and edit in windows
notepad. File contains only one line as below:
2009.01.01 12:01:01
Modify this line to actual date and time, save it, and then
copy into root folder of MT4032 in data storage mode.
Next unplug USB cable and wait until LED indicator goes
o . Now turn on MT4032 new time settings will be ap-
plied.
Reset
If you encounter strange behavior of the device you can
put straighten paper clip into “reset hole” to restart the
device.
Note! If there is no available space for recording red
and green LED indicator will  ash at the same time.
After 5 sec device will stop recording and switch into
o mode.
Note! If red and green LED indicator is blinking alter-
natively you need to recharge the device. After 5 sec
device will stop recording and switch into o mode.
Reset
If you encounter strange behavior of the device you can
put straighten paper clip into “reset hole” to restart the
device.
Note! If there is no available space for recording red
and green LED indicator will  ash at the same time.
After 5 sec device will stop recording and switch into
o mode.
Note! If red and green LED indicator is blinking alter-
natively you need to recharge the device. After 5 sec
device will stop recording and switch into o mode.
PENCAM
Users ma a nu l
Live Recording in Every Situation
MT4032
EN
ON/OFF
Camera
Microphone
U SB Port
Card ls ot
Indicator
Reset ub tton
S ng n etti data a d time
I ll v lu -nsta microSD card into de ice and p g it to PC com
puter via USB cab de ice is set le. When v todata storage
mode wi you ll nd time.txt le in the root der. fol Use
Windows notepad edit this to le and a id enter v l date and
time. Sa e v le np g, u lu USB cab e and min. Now l wait 1
power on de ice again new and time settings wi v date ll
be stored.
Webcam mode
Turn T4 lu M 032 into on mode and p gged to PC using USB
cab Windows wi insta new captle. ll ll ure video de ice. v In
webcam mode on y l video is enab ed microphone f nc l , u -
tion is disab ed se inp tl – u external u a dio de iceu v for skype
calls.


Produkt Specifikationer

Mærke: Media-Tech
Kategori: Ikke kategoriseret
Model: Pencam

Har du brug for hjælp?

Hvis du har brug for hjælp til Media-Tech Pencam stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Media-Tech Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AOpen

AOpen DEX5950 Manual

26 November 2024
AOpen

AOpen WB5102 Manual

26 November 2024
AOpen

AOpen DE6100 Manual

26 November 2024
AOpen

AOpen DE5900 Manual

26 November 2024
AOpen

AOpen DE7000 Manual

26 November 2024
AOpen

AOpen DE7600 Manual

26 November 2024
AOpen

AOpen DES3200 Manual

26 November 2024
AOpen

AOpen DEN5128 Manual

26 November 2024
AOpen

AOpen DES4100 Manual

26 November 2024
AOpen

AOpen DEV7610 Manual

26 November 2024