Meliconi Gumbody Facile 3 web Manual

Meliconi Fjernbetjening Gumbody Facile 3 web

Læs gratis den danske manual til Meliconi Gumbody Facile 3 web (7 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 31 anmeldelser. Har du et spørgsmål om Meliconi Gumbody Facile 3 web, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
8
Keep this booklet for future reference.
Thank you for choosing a Meliconi remote control.
The Facile 3 web remote control is ideal for replacing up to 3 remote controls for TV - SAT (satellite decoder)
- TER (Digital Terrestrial decoder). Moreover, thanks to its AUDIO UPDATE function, the device can also be
connected to a PC via the cable supplied in order to download the information required to confi gure it. And not
only: the Facile 3 web remote control has a LEARN function so it can learn any original remote control signals
not yet inserted in the databank, as well as allowing secondary functions to be acquired and saved on the F1 -
F2 - F3 - F4 function keys or on any other button on the keypad.
The remote control has a non-volatile memory, meaning that it does not lose its settings even if there are no
batteries in it. Its ergonomic shape and soft rubber body make it easy to grip and protect the remote control if it
is knocked or dropped.
IMPORTANT: The remote control must not be exposed to excessive heat sources.
USE OF THE BUTTONS AND FUNCTIONS
The functions of the buttons described below are available only if they are on your original device.
Volume control +/–
TELETEXT buttons
ON/OFF switches the device OFF and
in some cases ON
Numeric keypad
Confi rm selection
MUTE turns sound OFF and ON
For selecting an external
input source
For selecting the next programme
P+ or the previous programme P–
For moving around within the MENU
Buttons for selecting the device to be
controlled.
Fastext functions or for selecting sub-
menus using colours
Specifi c buttons for decoder
Displays the list of programmes
Selects analogue/digital
Selects digital TV and radio
Button for activating the LEARN function.
The button lights up when commands are
being captured or transmitted
User customised buttons that additional
commands can be saved to and accessed
directly from
web
I
EN
INSERTING THE BATTERIES
Before using the remote control, insert the batteries and programme it.
Do not leave fl at batteries inserted, as liquid may leak and damage the remote control
The Facile 3 web remote control is a universal remote, its memory containing data relating to many devices of
different brands available on the market.
Each original device has a specifi c code which must be used to set up the remote control.
Therefore, to use your Facile 3 web you must enter the specifi c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:
A) - INTERNET (recommended)
B) - CELL PHONE (SMS)
C) - MANUAL SEARCH
SETTING CODES
Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their
remote control directly on their cell phone.
Simply send an SMS to this number 0039 345 7518893 as follows: 3A, Type, Brand, Model
- Type = indicate the device to be controlled using one of the following abbreviations: TV / SAT / TER (Digital
Terrestrial decoder).
- Brand, Model = to indicate the brand and the model of the device to be controlled.
Example: 3A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand)
Once you have received the SMS with the list of codes, set the fi rst code in the remote control as described in
the ENTERING THE CODE DIRECTLY section.
Stand in front of the device with the MELICONI remote control. Turn the device on and then press the ON/OFF
button on the remote.
If the device does NOT switch off, try setting the consecutive code in the SMS list in the remote control.
When the device reacts check whether the other buttons are operating correctly too.
If they do, the remote control is ready to use.
If they don’t, you are probably using an incorrect code destined for a very similar device; at this point
ignore the SMS list and consult the SETTING CODES USING A MANUAL CODE section to fi nd a more suitable
code.
The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit
continuously until you release the button. If the light fl ashes, the batteries
inserted are not charged and are about to go fl at, therefore you must
substitute them.
If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website
to identify the specifi c codes for the devices you wish to command. Then set the codes manually in your
MELICONI remote control as described in the ENTERING THE CODE DIRECTLY procedure.
(the service s fee and the only cost is that of sending the SMS, which naturally depends on the rates of the
service operator in question)
SETTING CODES USING A CELL PHONE
SETTING CODES USING INTERNET
9

Produkt Specifikationer

Mærke: Meliconi
Kategori: Fjernbetjening
Model: Gumbody Facile 3 web

Har du brug for hjælp?

Hvis du har brug for hjælp til Meliconi Gumbody Facile 3 web stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fjernbetjening Meliconi Manualer

Meliconi

Meliconi fully 8 Manual

12 Januar 2025
Meliconi

Meliconi gumbody light facile Manual

23 September 2024
Meliconi

Meliconi universal 4 Manual

22 September 2024
Meliconi

Meliconi Pratico 2 Manual

18 September 2024
Meliconi

Meliconi Personal 2 plus Manual

29 August 2024
Meliconi

Meliconi Speedy 2.1 Manual

21 August 2024
Meliconi

Meliconi GumBody Light Manual

21 August 2024
Meliconi

Meliconi Pratico 2.1 Manual

20 August 2024
Meliconi

Meliconi Gumbody Personal 7 plus Manual

20 August 2024
Meliconi

Meliconi Gumbody Personal 2 Manual

20 August 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Motion

Motion CM-11 Manual

14 Juli 2025
Impact

Impact PowerTrigger PT-AC16 Manual

9 Juli 2025
Impact

Impact PowerTrigger PT-AC16R Manual

9 Juli 2025
Impact

Impact VE-WCSMI Manual

9 Juli 2025
Impact

Impact ACDC-TXS Manual

9 Juli 2025
Impact

Impact VE-WCSO Manual

9 Juli 2025
Impact

Impact PowerSync PS16-MINI Manual

9 Juli 2025
Impact

Impact VE-WCN Manual

9 Juli 2025
Impact

Impact VE-WCC Manual

9 Juli 2025
Impact

Impact PS16-Mini-T Manual

9 Juli 2025