Microchip ATSAMC21G18A Manual


Læs nedenfor 📖 manual på dansk for Microchip ATSAMC21G18A (100 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/100
User's Guide
QTouch® Modular Library Peripheral Touch Controller
User's Guide
Description
The Microchip QTouch® Peripheral Touch Controller (PTC) offers built-in hardware for capacitive touch measurement
on sensors that function as buttons, sliders, and wheels. The PTC supports both mutual and self-capacitance
measurements without the need for any external component. It offers superb sensitivity and noise tolerance, as well
as self-calibration, and minimizes the sensitivity tuning effort by the user. It also extends the support for capacitive
touch surface and gesture functionality.
The PTC is intended for autonomously performing capacitive touch sensor measurements. The external capacitive
touch sensor is typically formed on a PCB, and the sensor electrodes are connected to the analog charge integrator
of the PTC using the device I/O pins. The PTC supports mutual capacitance sensors organized as capacitive touch
matrices in different X-Y configurations, including Indium Tin Oxide (ITO) sensor grids. In Mutual Capacitance mode,
the PTC requires one pin per X-line (driveline) and one pin per Y-line (sense line). In Self-Capacitance mode, the
PTC requires only one pin with a Y-line driver for each self-capacitance sensor.
Features
Implements Low-Power, High-Sensitivity, Environmentally Robust Capacitive Touch Buttons
Supports Mutual Capacitance and Self-Capacitance Sensing
Up to 46 Buttons in Self-Capacitance mode
Up to 529 Buttons in Mutual Capacitance mode
Supports Lumped Mode Configuration
One Pin Per Electrode
Load Compensating Charge Sensing
Parasitic Capacitance Compensation for Mutual Capacitance mode
Adjustable Gain for Superior Sensitivity
Zero Drift Over the Temperature and VDD Range
No Need for Temperature or VDD Compensation
Hardware Noise Filtering and Noise Signal De-Synchronization for High Conducted Immunity
Atmel Start QTouch Configurator Support – Wizard Guided Touch Project Creation
Product Support
For assistance related to QTouch capacitive touch sensing software libraries and related issues, contact your local
Microchip sales representative or visit https://www.microchip.com/support/.
© 2020 Microchip Technology Inc. User Guide DS40001986E-page 1


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: ATSAMC21G18A

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip ATSAMC21G18A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Microchip

Microchip ATECC608B Manual

4 September 2024
Microchip

Microchip HV860 Manual

4 September 2024
Microchip

Microchip EVB-LAN9255 Manual

4 September 2024
Microchip

Microchip LX4580 Manual

4 September 2024
Microchip

Microchip LX7720 Manual

4 September 2024
Microchip

Microchip AT32UC3A364 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Gigabyte

Gigabyte ODIN GT 550W Manual

23 November 2024
Stamos

Stamos S-PLASMA 60U Manual

23 November 2024
Velbus

Velbus VMBPIRO-W-20 Manual

23 November 2024
Honor

Honor 90 Pro Manual

23 November 2024
Honor

Honor 80 SE Manual

23 November 2024
Medela

Medela Safe & Dry Manual

22 November 2024
Jane

Jane First Potty Manual

22 November 2024