Microchip HV264DB1 Manual


Læs nedenfor 📖 manual på dansk for Microchip HV264DB1 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Supertex inc.
Supertex inc.
www.supertex.com
HV264DB1
Doc.# DSDB-HV264DB1
NR060613
Quad, High Voltage
Amplier Array Demo Board
Specications
The Supertex HV264TS-G is a quad high voltage amplier
array device in a 24-pin TSSOP package. The HV264DB1
demo board provides a platform to evaluate this device.
This demoboard requires only a minimum setup including
a VDD low voltage supply, a VPP high voltage supply, and
a signal source. The demoboard provides the input/output
connections through two 6-pin headers.
For detailed electrical performance, please refer to the
HV264 datasheet.
General Description
Board Layout
Parameter Value
VPP high voltage supply 200V
VDD
low voltage supply 4.5 to 5.5V
HVOUT output voltage swing 1.0V to VPP - 10V
VIN Input signal range 0 to VDD - 1.5V
AV
closed loop gain 66.7V/V with internal
feedback resistors
Typical SR output slew rate 9.0V/µs
IPEAK output peak current 3.0mA
Power Up/Down Sequence
The device can be damaged due to an improper power up /
down sequence. To prevent damage, please follow the ac-
ceptable power up / down sequences. An external diode
across VPP and VDD in included on the board, where the
anode of the diode is connected to VDD and the cathode is
connected to VPP. Any low current high voltage diode will be
adequate.
Acceptable Power Up Sequences
1) VDD 2) VPP 3) Inputs
1) VDD 2) Inputs 3) VPP
Acceptable Power Down Sequences
1) Inputs, 2) VPP ) VDD
1) VPP ) Inputs) VDD
Gain Setting
The HV264 quad amplier array has the internal built-in gain
setting resistors available with a xed gain of 66.7V/V +/- 5%.
External gain setting resistors can be used for applications
that require better tolerance or a different closed loop gain. An
example is shown in the following schematics. Fig. 1 shows
the schematics of the demoboard. The external resistor val-
ues and tolerances can be selected to meet different gain set-
ting and precision requirements as shown in Fig. 2.
Pin Name Description
VPP High voltage positive supply
VDD Low voltage positive supply
IN1 to IN4 Amplier inputs
HVOUT1 to HVOUT4 Amplier outputs
GND Device ground


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: HV264DB1

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip HV264DB1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Microchip

Microchip PD81101 Manual

23 December 2024
Microchip

Microchip ATECC608B Manual

4 September 2024
Microchip

Microchip HV860 Manual

4 September 2024
Microchip

Microchip EVB-LAN9255 Manual

4 September 2024
Microchip

Microchip LX4580 Manual

4 September 2024
Microchip

Microchip LX7720 Manual

4 September 2024
Microchip

Microchip AT32UC3A364 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024