Microchip HV9911 Manual


Læs nedenfor 📖 manual på dansk for Microchip HV9911 (22 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/22
2017 Microchip Technology Inc. DS20005580A-page 1
HV9911
Features
Switch-mode Controller for Single-switch Drivers:
- Buck
- Boost
- Buck-boost
- SEPIC
Works with High-side Current Sensing
Closed-loop Control of Output Current
High Pulse-Width Modulation (PWM) Dimming
Ratio
Internal 250V Linear Regulator (can be extended
using external Zener Diodes)
Internal 2% Voltage Reference (0°C < T
A < 85°C)
Constant Frequency or Constant Off-time
Operation
Programmable Slope Compensation
Logic Input for Enable and PWM Dimming
+0.2A/-0.4A Gate Driver
Output Short-circuit Protection
Output Overvoltage Protection
Synchronization Capability
Programmable Metal-Oxide Semiconductor
Field-Effect Transistor (MOSFET) Current Limit
Applications
RGB Backlight Applications
Battery-powered LED Lamps
Other DC/DC LED Drivers
General Description
The HV9911 is an LED driver IC designed to control
single-switch PWM converters (buck, boost,
buck-boost and SEPIC) in a Constant Frequency or
Constant Off-time mode. The controller uses a peak
current control scheme with programmable slope
compensation and includes an internal
transconductance amplifier to control the output current
in closed loop, enabling high output current accuracy.
In the Constant Frequency mode, multiple HV9911s
can be synchronized with each other or with an
external clock using the sync pin. Programmable
MOSFET current limit enables current limiting during
Input Undervoltage and Output Overload conditions.
The IC also includes a 0.2A source and 0.4A sink gate
driver for high-power applications. An internal
9V–250V linear regulator powers the IC, eliminating the
need for a separate power supply. The HV9911
provides a TTL-compatible PWM dimming input that
can accept an external control signal with a duty ratio
of 0%–100% and a frequency of up to a few kilohertz.
The IC also provides a FAULT output which, can be
used to disconnect the LEDs in case of a Fault
condition, using an external disconnect FET.
The HV9911-based LED driver is ideal for RGB
backlight applications with DC inputs. HV9911-based
LED lamp drivers can achieve efficiency in excess of
90% for buck and boost applications.
Package Type
VIN
VDD
GATE
GND
CS
SC
RT
SYNC
FDBK
IREF
COMP
PWMD
OVP
FAULT
REF
CLIM
1
2
3
4
5
6
7
8 9
10
11
12
13
14
15
16
16-lead SOIC
(Top view)
See Table 2-1 for pin information.
Switch-Mode LED Driver IC with High Current Accuracy


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: HV9911

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip HV9911 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Microchip

Microchip PD81101 Manual

23 December 2024
Microchip

Microchip ATECC608B Manual

4 September 2024
Microchip

Microchip HV860 Manual

4 September 2024
Microchip

Microchip EVB-LAN9255 Manual

4 September 2024
Microchip

Microchip LX4580 Manual

4 September 2024
Microchip

Microchip LX7720 Manual

4 September 2024
Microchip

Microchip AT32UC3A364 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024