Microchip MIC24067 Manual


Læs nedenfor 📖 manual på dansk for Microchip MIC24067 (38 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/38
2022 Microchip Technology Inc. and its subsidiaries DS20006730A-page 1
MIC24066/7
Features
Input Voltage Range: 4.5V to 36V
Adjustable Output from 0.6V to 32V (also limited
by Duty Cycle)
High Current Capability of 6A for MIC24066/7
Adaptive Constant On Time Control
0.6V Internal Reference with ±1% Accuracy
Up to 800 kHz Switching Frequency
High Voltage Internal LDO for Single Supply
Operation
Secondary LDO to Improve System Efficiency
Supports Start-up to Pre-bias Output
Internal Compensator for Tight Output Regulation
Enable Function for Low Stand-by Current
Programmable HLL/CCM Operation (MIC24067)
Programmable Soft Start Time (MIC24066)
Programmable Current Limit and Hiccup Short
Circuit Protection
Thermal Shut Down with Hysteresis
Compact Size: 5 mm x 6 mm 36-Pin Wettable
Flank VQFN
-40°C to +125°C Junction Temperature Ranges
Applications
Servers and Workstations
Routers, Switches and Telecom Equipment
Base Stations
High Power Density Point-of-Load Conversion
General Description
The MIC24066/7 is a family of commercial 36V syn-
chronous switching regulators delivering 6A of load
current.
The MIC24066/7 are wide input range (4.5V-36V)
integrated FET switching regulator which supports 6A
load. These devices have an enhanced high voltage
COT controller co-packaged with a pair of N-Channel
FETS with improved avalanche rating.
The output voltage is adjustable down to 0.6V with ±1%
accuracy. The Hyper Speed Control® proprietary
architecture allows for ultra-fast transient response
while reducing the output capacitance.
These devices feature programmable switching
frequency from 270 kHz to 800 kHz. The operating
mode under light load conditions can be selected
between HyperLight Load® (HLL) mode and
Continuous Conduction Mode (CCM) in MIC24067.
HLL mode results in higher efficiency than that of the
CCM mode under light load conditions while the CCM
mode keeps the switching frequency almost constant
over the entire load current range. The enable pin (EN)
allows user to enable/disable the device operation. The
secondary LDO (powered by EXTVDD) allows user to
operate the system at increased efficiency by supplying
the device bias power from the output of the switching
regulator.
An open drain PGOOD pin provides a power good
signal to indicate output voltage is within ±10% of the
target level.
These devices offer a full suite of protection features to
ensure safe operation of the IC during fault conditions.
These include UVLO, hiccup current limit short circuit
protection and thermal shutdown.
These devices are available in a 36-pin 5 mm x 6 mm,
Wettable Flank VQFN with a junction operating range
from -40°C to +125°C.
36V, 6A High Performance Switching Buck Regulators


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: MIC24067

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip MIC24067 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Microchip

Microchip ATECC608B Manual

4 September 2024
Microchip

Microchip HV860 Manual

4 September 2024
Microchip

Microchip EVB-LAN9255 Manual

4 September 2024
Microchip

Microchip LX4580 Manual

4 September 2024
Microchip

Microchip LX7720 Manual

4 September 2024
Microchip

Microchip AT32UC3A364 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024