Microchip MIC45116 Manual


Læs nedenfor 📖 manual på dansk for Microchip MIC45116 (42 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/42
2016 Microchip Technology Inc. DS20005571A-page 1
MIC45116
Features
Up to 6A Output Current
>93% Peak Efficiency
Output Voltage of 0.8V to 85% of Input with ±1%
Accuracy
Fixed 600 kHz Switching Frequency
Enable Input and Open-Drain Power Good Output
HyperLight Load® (MIC45116-1) Improves Light
Load Efficiency
Hyper Speed Control® (MIC45116-2) Architecture
Enables Fast Transient Response
Supports Safe Start-Up into Pre-Biased Output
–40°C to +125°C Junction Temperature Range
Thermal Shutdown Protection
Short-Circuit Protection with Hiccup Mode
Adjustable Current Limit
Available in 52-Pin 8 mm x 8 mm x 3 mm QFN
Package
Applications
High Power Density Point-of-Load Conversion
Servers, Routers, Networking, and Base Stations
FPGAs, DSP, and Low-Voltage ASIC Power
Supplies
Industrial and Medical Equipment
General Description
The MIC45116 is a synchronous step-down regulator
module, featuring a unique adaptive ON-time control
architecture. The module incorporates a DC/DC
controller, power MOSFETs, bootstrap diode, bootstrap
capacitor, and an inductor in a single package;
simplifying the design and layout process for the end
user.
This highly integrated solution expedites system
design and improves product time-to-market. The
internal MOSFETs and inductor are optimized to
achieve high efficiency at a low output voltage. The fully
optimized design can deliver up to 6A current under a
wide input voltage range of 4.75V to 20V without
requiring additional cooling.
The MIC45116-1 uses HyperLight Load® (HLL) which
maintains high efficiency under light load conditions by
transitioning to variable frequency, discontinuous-
mode operation. The MIC45116-2 uses Hyper Speed
Control® architecture which enables ultra-fast load
transient response, allowing for a reduction of output
capacitance. The MIC45116 offers 1% output accuracy
that can be adjusted from 0.8V to 85% of the input
(PVIN) with two external resistors. Additional features
include thermal-shutdown protection, adjustable
current limit, and short-circuit protection. The
MIC45116 allows for safe start-up into a pre-biased
output.
Typical Application Circuit
MIC45116
8x8x3 QFN
MIC45116
VIN
CIN
10k
PVDD
5VDD
PG
PVIN
VIN
EN
PGND
ILIM
SW
FB
VOUT
VOUT
COUT
CFF RFB1
RFB2
RINJ
CINJ
RLIM
20V/6A DC/DC Power Module


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: MIC45116

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip MIC45116 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Microchip

Microchip PD81101 Manual

23 December 2024
Microchip

Microchip ATECC608B Manual

4 September 2024
Microchip

Microchip HV860 Manual

4 September 2024
Microchip

Microchip EVB-LAN9255 Manual

4 September 2024
Microchip

Microchip LX4580 Manual

4 September 2024
Microchip

Microchip LX7720 Manual

4 September 2024
Microchip

Microchip AT32UC3A364 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024