Microchip SY54020R Manual


Læs nedenfor 📖 manual på dansk for Microchip SY54020R (14 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/14
SY54020R
Low Voltage 1.2V/1.8V/2.5V CML 1:4 Fanout
Buffer with /EN and Fail-Safe Input
3.2Gbps, 2.5GHz
Precision Edge is a registered trademark of Micrel, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
April 2009 M9999-041409-A
hbwhelp@micrel.com or (408) 955-1690
General Description
The SY54020R is a fully differential, low voltage
1.2V/1.8V/2.5V CML 1:4 Fanout Buffer with active-low
Enable (/EN) and Fail-Safe Input (FSI). The Enable is
synchronous so that the outputs will only be
enabled/disabled when they are already in the LOW
state. This avoids any chance of generating a runt clock
pulse when the device is enabled/disabled as can
happen with an asynchronous control. When this device
is used as a clock fanout, disabling the downstream
clock may reduce system power. FSI is a special circuit
designed to sense the amplitude of the input signal and
to latch the output when an invalid or no signal is
present at the input. The SY54020R can process clock
signals up to 2.5 GHz or data patterns up to 3.2Gbps.
The differential input includes Micrel’s unique, 3-pin
input termination architecture that interfaces to LVPECL,
LVDS or CML differential signals as small as 100mV
(200mVpp) without any level-shifting or termination
resistor networks in the signal path. For AC-coupled
input interface applications, an internal voltage
reference is provided to bias the VT pin. The outputs are
CML, with extremely fast rise/fall times guaranteed to be
less than 100ps.
The SY54020R operates from a 2.5V ±5% core supply
and a 1.2V, 1.8V or 2.5V ±5% output supply and is
guaranteed over the full industrial temperature range
(–40°C to +85°C).
Datasheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Functional Block Diagram
Precision Edge®
Features
1.2V/1.8V/2.5V CML 1:4 Fanout Buffer with FSI
Active-low Enable (/EN) input to disable the outputs
Guaranteed AC performance over temperature and
voltage:
DC-to > 3.2Gbps Data throughput
DC-to > 2.5GHz Clock throughput
<400 ps propagation delay (IN-to-Q)
<20ps within-device skew
<100 ps rise/fall times
Ultra-low jitter design
<1psRMS cycle-to-cycle jitter
High-speed CML outputs
2.5V ±5% VCC , 1.2/1.8V/2.5V ±5% VCCO power supply
operation
Industrial temperature range: –40°C to +85°C
Available in 16-pin (3mm x 3mm) MLF® package
Applications
SONET clock and data distribution
Fibre Channel clock and data distribution
Gigabit Ethernet clock and data distribution
Markets
Storage
ATE
Test and measurement
Enterprise networking equipment
High-end servers
Access
Metro area network equipment


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: SY54020R

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip SY54020R stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Märklin

Märklin 72886 Manual

24 Januar 2025
Märklin

Märklin 72797 Manual

24 Januar 2025
Märklin

Märklin 7001 Manual

24 Januar 2025
Hilti

Hilti KCC-WF Manual

24 Januar 2025
Märklin

Märklin 7051 Manual

24 Januar 2025
ATen

ATen KH1516Ai Manual

24 Januar 2025
Adonit

Adonit PD-3A2C Manual

24 Januar 2025
Adonit

Adonit Dash 4 Manual

24 Januar 2025