Miele W1 WCE670 Manual

Miele Vaskemaskine W1 WCE670

Læs nedenfor 📖 manual på dansk for Miele W1 WCE670 (4 sider) i kategorien Vaskemaskine. Denne guide var nyttig for 29 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
WCE 670 en - AU,NZ M.-Nr. 10 874 810/00
Before the first use Operating the washing machine Preparing the laundry Selecting a programme Adding detergent Starting the programme Extras
OPERATING THE WASHING MACHINE
PREPARING THE LAUNDRY/SELECTING A PROGRAMME
ADDING DETERGENT/STARTING THE PROGRAMME
3 5
12
4
Operating the sensor controls
The sensor controls react to fingertip
contact. Selection is possible as long as the
respective sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means: selection
possible
1 Control panel
The control panel consists of a display
and various sensor controls.
2 Display
The following values are shown and/or
selected in the display:
3 Sensor controls 
The values in the display can be
changed with the . sensors
4 OK sensor
The OK sensor is used to confirm
selected values.
5 TwinDos sensors with options for
Whites and Colours
The TwinDos sensor is used for
deactivating and activating automatic
detergent dispensing.
6 Optical interface
for service technicians.
7 Sensor controls for Extras
You can supplement wash programmes
with extra options.
8 Sensor
Activates detergent dispensing with a
capsule.
9 Sensor
The sensor starts the Delay start
function or SmartStart.
10 Sensor
You can specify the level of soiling of
the load in three settings. This sensor is
only active when the TwinDos option is
activated.
11 Start/Stop sensor
Touching the Start/Stop sensor starts
the selected programme or cancels
a programme that has already been
started.
12 Programme selector
For selecting programmes and switching
the washing machine off.
Washing environmentally and economically
To get the most out of your machine,
load the maximum dry load for the
programme you are using.
When smaller amounts of laundry are
washed, the Auto load control system
will reduce the amount of water and
energy used.
Modern detergents make it possible to
wash at lower temperatures (e.g. 20°C).
Using lower temperature settings will
save energy.
For precise dispensing, use automatic
detergent dispensing.
Adjust the dosage to the degree of
soiling of the laundry.
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
1. Preparing the laundry
ĺEmpty all pockets.
ɉForeign objects (e.g. nails,
coins, paper clips, etc.) can
cause damage to garments and
components in the machine.
ĺSort the laundry by colour and by care label. Most
garments have a textile care label in the collar or side
seam.
ĺPre-treat stains and badly soiled areas (see the booklet
"Miele's guide to laundry care").
1 Detergent dispenser drawer
2 Control panel
3 Access to drain filter, drain pump
and emergency release
4 Door
5 Access panel for TwinDos
containers
3. Loading the washing machine
Opening the door
ĺReach under the door grip and
pull the door open.
ĺUnfold the laundry and load
loosely in the drum.
Closing the door
ĺMake sure that no items are
caught between the door and
the seal.
ĺShut the door with a gentle
swing.
4. Selecting programme settings
Selecting a temperature/spin speed
ĺTouch the sensors above or below the temperature 
or spin speed value in the display until the temperature/
spin speed you want appears in the display.
Selecting Extras
There are two ways of selecting Extras.
1. Directly above the sensor controls
ĺTouch the sensor for the Extra you want. It then lights up
brightly.
2. Via the Extras sensor control and the display
ĺTouch the sensor control.Extras
The following appears in the display: No Extras 
ĺTouch the sensor controls until the Extra you want 
appears in the display and confirm this with the OK
sensor.
Degree of soiling
The sensor is only active when the
TwinDos option is activated.
light
No visible soiling or stains
normal
Visibly soiled and⁄or just a few slight
stains
heavy
Heavily soiled and⁄or clearly visible stains
Delay start/SmartStart
Delay start
With Delay start you can delay the start of
a programme. The start of the programme
can be delayed from 15 minutes up to a
maximum of 24 hours.
SmartStart (only functional in selected
countries)
The SmartStart function lets you define
a time period during which your washing
machine will start automatically. The
machine will start on receipt of a signal, e.g.
from your energy supplier, that indicates
that the electricity tariff is particularly
economical.
5. Adding detergent
There are several options for adding
detergent.
TwinDos
TwinDos dispensing is automatically
activated for all programmes in which
dispensing is possible.
Changing TwinDos dispensing
You can change the suggested colour
composition of the laundry.
ĺTouch the sensor for or .Whites Colours
Deactivating TwinDos dispensing
ĺTouch the TwinDos sensor.
The sensor control is only dimly lit and
dispensing is deactivated.
Filling with detergent
Any detergent suitable for automatic front
loading washing machines can be used
with this appliance. Please observe the
instructions for use and dosage on the
detergent packaging.
Ensure that TwinDos dispensing is
deactivated.
ĺPull out the
detergent drawer
and add
detergent to the
compartments.
Detergent for the pre-wash
Detergent for the main wash,
including Soak if selected
/ Fabric softener, liquid starch or
capsules
Using detergent tablets or pods
Always put detergent tablets or pods
directly in the drum with the laundry.
They cannot be added via the detergent
dispenser drawer.
CapDosing
Three different types of capsules are
available:
Fabric care (e.g. fabric conditioner)
Additives (e.g. detergent enhancers)
Detergent
Each capsule contains the correct amount
for one wash cycle.
Capsules are available to order from Miele
or from the Miele online shop (see the end
of this booklet for contact details).
Keep capsules out of the reach of
children.
Activating CapDosing
ĺTouch the sensor.
The following appears in the display:
No cap 
ĺTouch the sensors until the capsule 
you want appears in the display.
ĺConfirm the capsule with the sensor.OK
See "Detergent" in the operating
instructions for more information.
6. Starting the programme - end
of the programme
Starting the programme
ĺTouch the flashing sensor.Start/Stop
The door will lock ( appears in the display)
and the programme will start.
At the end of the programme
The door is still locked during the Anti-
crease phase and the following will appear
alternately in the display:
Finish/Anti-crease and
 Press Start/Stop
ĺTouch the sensor. The door Start/Stop
will be unlocked.
ĺPull open the door.
ĺRemove the laundry.
Check that all items have been removed
from the drum.
ĺCheck the folds
in the door seal
for any small
articles, e.g.
buttons, which
might be lodged
there.
ĺTurn the programme selector to the
position. This switches the washing
machine off.
ĺIf applicable, remove the used capsule
from the detergent dispenser drawer.
Close the door. Otherwise there is
a danger of objects being placed
inadvertently in the drum. If these remain
unnoticed and were washed in the next
load, they could damage the laundry. An
open door is also a danger to pets and
children.
Extras
You can use the Extras sensor to augment
the wash programmes.
Short
The programme duration is reduced.
Mechanical action and energy usage are
increased.
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will give a better
result. Follow the instructions in the
display. Small loads give a better result.
The garments must be suitable for drying
in a tumble dryer and suitable for  
ironing  .
Water +
The water level in the wash and rinse
stages is increased and a second rinse is
carried out in the "Separate rinse/Starch"
programme.
You can select other functions for the
Water + sensor control. These are
described in "Settings".
Pre-wash
For laundry with large amounts of dirt, e.g.
dust and sand.
Soak
For heavily soiled and stained items with
protein stains.
A duration of between 30minutes
and 6hours can be chosen for the
soak process. See "Settings" for more
information.
The factory default setting is 30minutes.
Intensive
For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency
is increased through more intense
mechanical action and the application of
more heat energy.
Extra quiet
This option reduces noise levels during
the wash programme. Use this if you
want to wash during quiet periods (for
instance, when children are sleeping). The
final spin is automatically reduced to
(Rinse hold). The programme duration is
increased.
Extra gentle
Drum rotation and wash duration are
reduced. Lightly soiled fabrics are washed
more gently.
AllergoWash
This option should be used where high
standards of hygiene are required. More
energy is used to lengthen temperature
holding times and more water is used to
increase rinsing efficiency. The items must
be suitable for drying in a tumble dryer
 . and suitable for ironing
ɉDamage resulting from incorrect
installation and connection.
Installing and connecting the washing
machine incorrectly will cause serious
damage.
Please read the separate operating
instructions supplied with the appliance.
ɉDamage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing machine
and to adjacent cabinetry or appliances.
Please read the separate operating
instructions supplied with the appliance.
Switching on the washing machine
ĺTurn the programme selector to the
Cottons programme.
The welcome tone will sound and the
welcome screen will light up.
The display will guide you through the
initial commissioning, which is divided into
5steps.
For further information please refer to the
separate operating instructions.
2. Selecting a programme
ĺTurn the programme selector to a programme.
Programme selection
There are three possible ways to select a programme:
1. Selecting standard programmes via the
programme selector
ĺTurn the programme selector to the required
programme.
The selected programme will appear in the display. This
will then be replaced by the standard display.
2. Selecting further programmes via the "Further
programmes/ setting and the display:"
ĺTurn the programme selector to the Further
programmes/position.
Sportswear will appear in the display.
ĺTouch the sensors until the programme you want 
appears in the display.
ĺConfirm the programme with the sensor.OK
3. Selecting programmes via the MobileControl
and the Miele@mobile app
ĺTurn the programme selector to the MobileControl
position.
ĺTouch the sensor.Start⁄Stop
The washing machine can now be operated via a mobile
device using the Miele@mobile app.


Produkt Specifikationer

Mærke: Miele
Kategori: Vaskemaskine
Model: W1 WCE670

Har du brug for hjælp?

Hvis du har brug for hjælp til Miele W1 WCE670 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vaskemaskine Miele Manualer

Miele

Miele W 2205 Manual

15 Januar 2025
Miele

Miele WS 5510 P Manual

14 Januar 2025
Miele

Miele WKF 131 WPS Manual

23 December 2024
Miele

Miele W 2515 WPS Manual

23 December 2024
Miele

Miele W 3844 WPS Manual

23 December 2024
Miele

Miele WDB 030 Eco Manual

23 December 2024
Miele

Miele PT 7135 C Vario Manual

23 December 2024
Miele

Miele WMR 863 WPS Manual

23 December 2024

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer