Motorola C1001LX Manual

Motorola Trådløse DECT telefoner C1001LX

Læs nedenfor 📖 manual på dansk for Motorola C1001LX (2 sider) i kategorien Trådløse DECT telefoner. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Connecting the base
1. Plug the telephone line cord into the socket marked on the rear
of the base.
2. Plug the power adapter into the socket marked on the rear of
the base and plug the other end into the electrical outlet.
Charging the handset
3. If you are charging the battery for the rst time, place the handset
on the base to charge for at least 24 hours continuously.
4. When the handset is fully charged, icon will appear steady
on the display. Plug the other end of the telephone line cord
(make sure that one end is already plugged into the base) into the
telephone wall socket.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this
process for all the handsets and chargers.
1. Plug the power adapter into the socket marked on the rear of
the charger and plug the other end into an electrical outlet.
4. Press m, scroll u or d to select the volume (1 -5 or OFF) .
5. Press m to conrm or b to return to the previous menu.
5.1.2 Ringer tones
You can set dierent ringer tones for your internal and external calls.
Choose from 10 dierent ringer tones.
NOTE
You will hear a sample ring as you scroll to each ring tone.
1. Press m, scroll d to
Phone setup.
2. Press m. The display shows
Sounds
.
3. Press m. Scroll d to
Ring tones
.
4. Press m, scroll u or d to select the tone (1 -10) .
5. Press m to conrm or b to return to the previous menu.
5.1.3 Key tones on/o
When you press a button on the handset keypad, you will hear a beep.
You can switch these beeps on or o.
1. Press m, scroll d to
Phone setup.
2. Press m. The display shows
Sounds
.
3. Press m. Scroll d to
Key tone
.
4. Press m, u or d to select
On
or
O
and press m to conrm.
5.1.4 Docking tone on /o
When you replace the handset in the base you will hear a double beep.
You can switch this beep on or o.
1. Press m, scroll d to
Phone setup.
2. Press m. The display shows
Sounds
.
3. Press m. Scroll d to
Docking tone
.
4. Press m, u or d to select
On
or
O
and press m to conrm.
4.3 Edit a name and number
1. Press m twice. The display shows
View
.
2. Scroll d to
Edit
and press m.
3. Scroll u or d to the entry you want to edit, or search alphabetically
and press m. The existing name is displayed.
4. Press b to delete the name if required, then enter the new name
and press m. The existing number is displayed.
5. Press b to delete the number if required, then enter the new
number and press m to save.
4.4 Delete an entry
1. Press m twice. The display shows
View
.
2. Scroll d to
Delete
and press m.
3. Scroll u or d to the entry you want to delete, or search
alphabetically and press m. The display shows
Conrm?
.
4. Press m to conrm or b to cancel.
4.5 Delete all entries
1. Press m twice. The display shows
View
.
2. Scroll d to
Delete all
and press m.
3. The display shows
Conrm?
.
4. Press m to conrm or b to cancel.
5. Personal settings
5.1 Sounds
5.1.1 Ring volume
You can adjust the ringer volume and set dierent volume levels. Choose
from 5 volume levels or O.
1. Press m, scroll d to
Phone setup.
2. Press m. The display shows
Sounds
.
3. Press m. The display shows
Ring volume
.
4. Phonebook
The C100xLX handset phonebook can store up to 50 names and
numbers.
Names can be up to 14 characters long and numbers up to 24 digits.
4.1 Store a name and number
1. Press m.
Phonebook
is displayed.
2. Press m.
New Entry
is displayed.
3. Press m.
Enter Name
is displayed.
4. Enter a name and press m.
5. Enter a number. Press m to save.
6. Press e to return to standby.
ENTERING NAMES
Use the keypad letters to enter names, e.g. to store TOM:
Press 8 once to enter T.
Press 6 three times to enter O.
Press 6 once to enter M.
WRITING TIPS
Press b to delete the last character or digit.
Press u or d to move between characters.
Press 0 to insert a space.
4.2 View or dial an entry
1. Press u.
2. Scroll u or d to the entry you want.
OR
Enter the rst letter of the name to search alphabetically.
The rst name that starts with this letter or the nearest letter in the
alphabet will be
displayed. Scroll u or d to the entry you want.
3. Press t to dial or e to return to standby.
3.7.3 Delete an entry
1. Press r to open the Redial list.
2. Scroll u or d to the entry you want. Press m.
3. Scroll d to
Delete
and press m. The display shows
Conrm?
.
4. Press m to conrm or b to cancel.
3.7.4 Delete the entire Redial list
1. Press r to open the Redial list.
2. Press m. Scroll d to
Delete all
. The display shows
Conrm?
.
3. Press m to conrm or b to cancel.
3.8 Lock / unlock the keypad
When the keypad is locked, you can still answer incoming calls and
operate the handset normally during a call. When the call ends, the
keypad lock resumes in place.
NOTE
When the keypad is locked, you can still answer incoming calls and
operate the handset normally during a call. When the call ends, the
keypad lock resumes in place.
1. Press and hold 0.
Keys locked
is displayed.
2. To unlock the keypad, press and hold 0 again.
3.9 Paging / Find handset
Paging is a useful way to nd lost handsets.
1. Press p on the base. All handsets ring.
2. Press p again to cancel the paging call or press any key on the
handset to stop the paging call.
2. If more than 2 handsets are registered to the base press and hold
* and scroll d to the handset that is to join the call and press m.
3. When the other handset answers, press m to connect all three
callers to begin the conference call.
4. Press e to end the call.
3.6 Hands-free
To talk to the caller without holding the handset or for other people in
the room to listen to the conversation over the loudspeaker simply use
the hands-free function.
3.6.1 Make a hands-free call
1. Dial the number and then press h.
2. Press e to end the call.
3.6.2 Answer a call hands-free
Press h to answer the call in hands-free.
NOTE
Press h to switch the call between the earpiece and the loudspeaker.
During a hands-free call, press u or d to adjust the volume.
3.7 Redial
The last 10 entries dialed are stored in the redial list.
3.7.1 View or dial an entry
1. Press r to open the Redial list.
2. Scroll u or d to the entry you want.
3. Press t to dial the displayed entry or press e to return to standby.
3.7.2 Copy a Redial list number to the phonebook
1. Press r to open the Redial list.
2. Scroll u or d to the entry you want.
3. Press m. The display shows
Save number
.
4. Press m again. The display shows
Enter name
.
5. Enter the name and press m. The number is displayed.
6. Edit the number if necessary, then press m to save.
3.5 Intercom
3.5.1 Make an internal call
If more than one handset is registered to the base, internal calls can be
made between two handsets. icon flashes and the display shows the
handset number you are calling.
1. If only 2 handsets are registered to the base, press * and the other
handset rings automatically.
2. If more than 2 handset are registered to the base press * and
scroll d to the handset that is to be called and press t.
3.5.2 Receive an internal call
When you receive an internal call, icon flashes and the handset
number that is calling you is displayed.
1. Press t to make an internal call.
3.5.3 Transfer a call
You can transfer an external call to another handset registered to the
base.
During an external call:
1. If only 2 handsets are registered to the base, press and hold * and
the other handset rings automatically.
2. If more than 2 handsets are registered to the base press and hold
* and scroll dto the handset that is to be called and press m.
3. When the other handset answers, press e to complete the transfer.
NOTE
Your external call resumes automatically after 1 minute if there is no
answer.
3.5.4 3-way conference call
You can hold a 3-way conference call between 2 internal callers and 1
external caller.
During a call with an external caller:
1. If only 2 handsets are registered to the base, press and hold * and
the other handset rings automatically.
After charging your handset for the rst time, subsequent charging time
is about 6–8 hours a day. The battery and handset may become warm
during charging. This is normal.
1All talk and standby times are approximate and depend on features
selected and usage pattern.
Date and time
If you have subscribed to a Caller ID Service and the Auto Clock is set
to on, the date and time will set automatically for all handsets when you
receive your rst call.
If you do not have a Caller ID service, you can set the date and time
manually, see section “5.3. Date and Time”.
Your C100xLX is now ready for use.
2. Getting to know your phone
Underside of your base
A
A Page
In standby mode, press to ring the handset(s).
Press and hold to enter registration mode when registering
handsets.
Handset display
Display icons
Indicates signal strength.
Flashes when the handset is not registered to the base or if you are
out of range.
Indicates a missed call.
Steady when making an outgoing call.
Flashes to indicate an incoming or internal call.
Indicates an incoming call when viewing the calls list.
Indicates an outgoing call when viewing the calls list.
Hands-free is on.
Handset ringer is o.
Indicates new voicemail messages received .1
O when there is no voicemail messages.
pq Indicates you can scroll through a list or adjust the volume in talk mode.
uIndicates more text after the displayed information.
fBattery is fully charged.
HBattery is partially charged.
lBattery is running low.
EFlashes when battery is almost fully discharged.
Overview of your handset 1This feature is dependent on your Network Service provider supporting
the service. A subscription fee may be payable.
Navigating the menus
Each menu has a list of options, which can be seen in detail on the menu
map on the below list.
When the handset is switched on and in standby mode:
1. Press m to open the main menu.
2. Then use u or d buttons to scroll through the available options.
3. Press m to select an option. To return to the previous menu level,
press b. To exit the menu and return to standby, press e.
NOTE
If you do not press a button on the handset for 30 seconds the display will
automatically return to standby. It will also return to standby when the
handset is placed on the base or charger.
Menu map
Phonebook Ring tones Area code
View Key tone Flash time
Add new Docking tone Dial mode
Edit Battery tone Auto clock
Delete1Phone name Register
Delete all1Date & time Unregister
Phone setup Language Reset
Sounds Services
Ring volume Call list type
1Only available when an phonebook entry is already stored.
3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls.
The call timer will display after the rst 10 seconds of your call. When the
call ends, the total duration of your talk time is shown for 3 seconds.
3.1 Switch the handset on / o
Press and hold e to switch the handset on or o.
3.2 Calls
3.2.1 Make a call
1. Press t.
2. Dialing a telephone number.
3.2.2 Pre-dial
1. Use the keypad to dial a number, if you make a mistake press b to
delete the last digit.
2. Press t to dial.
3.2.3 End a call
Press e, or place the handset back on the base or charger.
3.2.4 Answer a call
When you receive an external call, the phone rings and icon flashes
on the display.
1. Press t to answer the call.
3.3 Adjust the earpiece volume
During a call, press u or d to increase or decrease the volume. There
are 5 levels to choose from.
3.4 Mute
You can mute your handset so that you can talk to someone nearby
without your caller hearing.
1. During a call, press M. The display shows
Mute on
and your caller
cannot hear you.
2. Press M again to resume your call.
1. Getting started
IMPORTANT
Do not place your C100xLX in the bathroom or other humid areas.
Location
You need to place your C100xLX base within 6 feet of an electrical outlet
and a telephone wall socket to provide the power to supply the device
and to connect to telephone service.
Make sure it is at least 3 feet away from other electrical appliances
to avoid interference. Your C100xLX works by sending radio signals
between the handset and base. The strength of the signal depends on
where you place the base. Putting it as high as possible ensures the best
signal.
HANDSET RANGE
The unit has a range of up to 650 feet outdoors when there is a clear
line of sight between the base and handset. Any obstruction between
the base and handset will reduce the range signicantly. With the
base indoors and the handset either indoors or outdoors, the range will
normally be up to 100 feet. Thick concrete and stone walls can severely
aect the range.
SIGNAL STRENGTH
The icon on your handset indicates that you are within range of the
base. When out of range of the base, the icon disappears. If you are
on a call, you will hear a warning beep.
If you are on a call, the line will hang up if the handset moves out
of range of the base. Move back within range. The handset will
automatically re-connect to the base.
Setting up
IMPORTANT
Use only the power adapter and telephone line cord supplied with the
product.
This User Guide provides you with all the information you need to
get the most from your phone.
Before you make your rst call you will need to set up your phone.
Follow the simple instructions in ‘Getting Started’, on the next
few pages.
IMPORTANT
Only use the telephone line cord and power adapter supplied.
Got everything?
• C100xLX base & cordless handset
• 1 x rechargeable Ni-MH battery pack
• Power adapter for the base
• Telephone line cord
• User Guide
• Quick Start Guide
If you have purchased a C100xLX multiple pack you will also have
the following items:
• Cordless handset & charger
• Rechargeable Ni-MH battery pack
• Power adapter for the charger
• Telephone line cord
Welcome...
to your new Motorola C100xLX Digital Cordless Telephone!
• All handsets are completely cordless and easy to locate with paging system.
• Bright backlit display.
• Speakerphone for hands-free conversations.
• 50 Name and Number phonebook.
• Caller ID shows you who’s calling and shows the details of the last 20
callers in a Calls list.1
• Redial up to 10 of the last numbers called.
• Register up to 4 handsets to a single base.
• Make internal calls and transfer external calls between handsets.
• Choose from 10 dierent ringtones.
Please note that this equipment is not designed for making
emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
Need help?
If you have any problems setting up or your using your C100xLX
Digital Cordless Telephone, please contact Customer Service at
1-888-331-3383. Alternatively, you may nd the answer in the ‘Help’
section at the back of this guide.
1You must subscribe to your network provider’s Caller ID service for
this feature to work. A subscription fee may apply.
Please note that this equipment is not designed for making
emergency telephone calls when power fails. Alternative
arrangements should be made for access to emergency services.
Manufactured, distributed or sold by Binatone Technologies Ltd., oicial
licensee for this product. MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other trademarks are the property
of their respective owners. © 2014 Motorola Mobility LLC. All rights
reserved.
Version 15 (EN-US)
2. If you are charging the battery for the rst time, place the handset
on the charger to charge for at least 24 hours continuously.
3. When the handset is fully charged, icon will appear steady on
the display. The display will show
Handset
and handset number (e.g.
2) to indicate that it is registered to the base.
IMPORTANT
Warning! Use only the approved rechargeable Ni-MH battery pack (AAA
2.4v 300mAh Ni-MH rechargeable battery) supplied with your C100xLX.
BATTERY LOW WARNING
If E icon flashes on the display and you hear a warning beep every 2
minutes during a call, you will need to recharge the handset before you
can resume use.
When charging, f icon will scroll on the display.
BATTERY PERFORMANCE
In ideal conditions, a fully charged battery should give up to 10 hours of
talk time or up to 200 hours standby time on a single charge.1
Note that new batteries do not reach their full capacity until it has been
put to normal use for several days.
To keep your batteries down at least one time per week will help prolong
battery life.
Running the batteries right down at least once a week will help them last
as long as possible.
The charge capacity of the rechargeable battery will reduce with time
as it wears out, giving the handset less talk / standby time. Eventually it
will need to be replaced.
Earpiece
Display
Phonebook / Scroll Up /
Volume down
Open the phonebook.
Scroll up through lists and
menus.
Increase the earpiece volume.
Menu / OK
Enter the main menu.
Select the option
displayed on screen.
Conrm menu option.
Talk / Flash
Make or answer a call.
Use flash (F) functions.
* / Intercom
Press and hold to make
an internal call.
Dial a *.
Hands-free
Activate and deactivate
hands-free during a call.
IMPORTANT
Hands-free activation can
suddenly increase the
volume in the earpiece to
a very high level. Make
sure the handset is not
too close to your ear.
Redial
In standby mode, press
to open the redial list.
Clear / Back
Delete characters on screen
when entering names and
numbers.
Go back to previous menu
level is displayed on the
screen.
Call list / Scroll Down /
Volume down
Press to enter the Calls list.
Scroll down through lists
and settings.
During a call, press to
decrease earpiece volume.
When the phone is ringing,
press to decrease the
handset ringer volume.
End call / Switch handset
on/o
End a call.
When in a menu, go back
to standby mode.
Press and hold to switch
handset o (when in
standby) or on.
Pause / # / Change case
Press and hold to enter a
pause (P) when pre-dialling
or storing numbers.
Dial a #.
When entering letters /
editing, press and hold to
change the case from Abc
to abc or ABC mode.
When viewing the Calls
List press to change the
CID format.
Microphone
Mute
Mute / unmute the
microphone during a
call.
Digital Cordless Telephone
Models: C1001LX, C1002LX, C1003LX and C1004LX

Produkt Specifikationer

Mærke: Motorola
Kategori: Trådløse DECT telefoner
Model: C1001LX

Har du brug for hjælp?

Hvis du har brug for hjælp til Motorola C1001LX stil et spørgsmål nedenfor, og andre brugere vil svare dig


Trådløse DECT telefoner Motorola Manualer

Motorola

Motorola CD4012 Manual

5 Oktober 2024
Motorola

Motorola CD401-B Manual

24 August 2024
Motorola

Motorola CD501-B Manual

23 August 2024
Motorola

Motorola CD401-HS Manual

19 August 2024
Motorola

Motorola AXH Manual

12 August 2024
Motorola

Motorola L502BT Manual

8 August 2024
Motorola

Motorola CD501-C Manual

7 August 2024
Motorola

Motorola CD5011 Manual

3 August 2024
Motorola

Motorola L706C Manual

31 Juli 2024
Motorola

Motorola CD4014 Manual

19 Juli 2024

Trådløse DECT telefoner Manualer

Nyeste Trådløse DECT telefoner Manualer

KPN

KPN Atlanta 100 HS+BS Manual

5 Oktober 2024
Tiptel

Tiptel 292 Manual

23 September 2024
Tiptel

Tiptel 240 Manual

18 September 2024
Premier

Premier Maxima 500 Manual

16 September 2024
Premier

Premier Moonlight 200 Manual

16 September 2024
Alcatel

Alcatel F380-S Draadloze DECT telefoons Manual

9 September 2024
Alcatel

Alcatel Origin Draadloze DECT telefoons Manual

9 September 2024
Alcatel

Alcatel F330 Draadloze DECT telefoons Manual

8 September 2024
Alcatel

Alcatel F580-S Draadloze DECT telefoons Manual

8 September 2024
Alcatel

Alcatel E192 Draadloze DECT telefoons Manual

8 September 2024