Motorola C1011LX Manual

Motorola Telefon C1011LX

Læs nedenfor 📖 manual på dansk for Motorola C1011LX (2 sider) i kategorien Telefon. Denne guide var nyttig for 45 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
IMPORTANT
Warning! Use only the approved rechargeable Ni-MH battery pack (AAA 2.4v 300mAh
Ni-MH rechargeable battery) supplied with your C101xLX.
BATTERY LOW WARNING
If E icon flashes on the display and you hear a warning beep every 2 minutes
during a call, you will need to recharge the handset before you can resume use.
When charging, icon will scroll on the display. f
BATTERY PERFORMANCE
In ideal conditions, a fully charged battery should give up to 10 hours of talk time or up
to 200 hours standby time on a single charge.1
Note that new batteries do not reach their full capacity until it has been put to normal
use for several days.
To keep your batteries in the best condition, leave the handset o the base for a few
hours at a time.
Running the batteries down at least one time per week will help them last as long as
possible.
The charge capacity of the rechargeable battery will reduce with time as it wears out,
giving the handset less talk / standby time. Eventually it will need to be replaced.
After charging your handset for the rst time, subsequent charging time is about 6–8
hours a day. The battery and handset may become warm during charging. This is
normal.
1All talk and standby times are approximate and depend on features selected and
usage pattern.
Date and time
If you have subscribed to a Caller ID Service and the Auto Clock is set to on, the date
and time will set automatically for all handsets when you receive your rst call.
If you do not have a Caller ID service, you can set the date and time manually, see
section “5.3. Date and Time”.
Your C101xLX is now ready for use.
Charging the handset
3. If you are charging the battery for the rst time, place the handset on the base to
charge for at least 24 hours continuously.
4. When the handset is fully charged, icon will appear steady on the display.
Plug the other end of the telephone line cord (make sure that one end is already
plugged into the base) into the telephone wall socket.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this process for all the
handsets and chargers.
1. Plug the power adapter into the socket marked on the rear of the charger
and plug the other end into an electrical outlet.
2. If you are charging the battery for the rst time, place the handset on the charger
to charge for at least 24 hours continuously.
3. When the handset is fully charged, icon will appear steady on the display.
The display will show
Handset
and handset number (e.g. 2) to indicate that it is
registered to the base.
3. Press . Scroll md to
Docking tone
.
4. Press , mu or d to select
On
or
O
and press m to conrm.
5.1.5 Battery tones
When the battery is running low you will hear a warning beep. You can switch this
beep on or o.
1. Press , scroll md to
Phone setup.
2. Press . The display shows m
Sounds
.
3. Press . Scroll md to
Battery tone
.
4. Press , mu or d to select
On
or
O
and press m to conrm.
5.2 Handset name
Personalize your handset, with a name or location for example Peter or Bedroom.
Maximum 12 characters.
1. Press , scroll md to
Phone setup.
2. Press . The display shows m
Sounds
.
3. Scroll d to
Phone name
and press . m
4. Enter the new handset name and press m to conrm.
Delete the current name by pressing .b
5.3 Date & time
1. Press , scroll md to
Phone setup.
2. Press . The display shows m
Sounds
.
3. Scroll d to
Date & time
and press . m
4. Enter the date using the keypad (e.g. 08--12--14 for 12th of August 2014) and
press m to conrm.
5. Enter the time using the 12 hour format
hh:mm
, e.g. 02:45 for 2:45.
6. Scroll u or d to select
am
or
pm
and press m to conrm.
5.4 Language
1. Press , scroll md to
Phone setup.
2. Press . The display shows m
Sounds
.
3. Scroll d to
Language
and press . m
4. Scroll to select the required language and press u or dm to conrm.
5. Personal settings
5.1 Sounds
5.1.1 Ring volume
You can adjust the ringer volume and set dierent volume levels. Choose from 5
volume levels or O.
1. Press , scroll md to
Phone setup.
2. Press . The display shows m
Sounds
.
3. Press . The display shows m
Ring volume
.
4. Press , scroll to select the volume (1 -5 or OFF) .mu or d
5. Press to conrm or mb to return to the previous menu.
5.1.2 Ringer tones
You can set dierent ringer tones for your internal and external calls. Choose from 10
dierent ringer tones.
NOTE
You will hear a sample ring as you scroll to each ring tone.
1. Press , scroll md to
Phone setup.
2. Press . The display shows m
Sounds
.
3. Press . Scroll md to
Ring tones
.
4. Press , scroll to select the tone (1 -10) .mu or d
5. Press to conrm or mb to return to the previous menu.
5.1.3 Key tones on/o
When you press a button on the handset keypad, you will hear a beep. You can switch
these beeps on or o.
1. Press , scroll md to
Phone setup.
2. Press . The display shows m
Sounds
.
3. Press . Scroll md to
Key tone
.
4. Press , mu or d to select
On
or
O
and press m to conrm.
5.1.4 Docking tone on /o
When you replace the handset in the base you will hear a double beep. You can switch
this beep on or o.
1. Press , scroll md to
Phone setup.
2. Press . The display shows m
Sounds
.
WRITING TIPS
Press to delete the last character or digit.b
Press to move between characters.u or d
Press to insert a space.0
4.2 View or dial an entry
1. .Press u
2. Scroll u or d to the entry you want.
OR
Enter the rst letter of the name to search alphabetically.
The rst name that starts with this letter or the nearest letter in the alphabet will be
displayed. Scroll u or d to the entry you want.
3. Press to dial or t e to return to standby.
4.3 Edit a name and number
1. Press twice. The display shows m
View
.
2. Scroll d to
Edit
and press .m
3. Scroll to the entry you want to edit, or search alphabetically and press u or d
m. The existing name is displayed.
4. to delete the name if required, then enter the new name and press Press b
m. The existing number is displayed.
5. to delete the number if required, then enter the new number and Press b
press .m to save
4.4 Delete an entry
1. Press twice. The display shows m
View
.
2. Scroll d to
Delete
and press .m
3. Scroll to the entry you want to delete, or search alphabetically and press u or d
m. The display shows
Conrm?
.
4. Press to conrm or mb to cancel.
4.5 Delete all entries
1. Press twice. The display shows m
View
.
2. Scroll d to
Delete all
and press .m
3. The display shows
Conrm?
.
4. Press to conrm or mb to cancel.
3.7.4 Delete the entire Redial list
1. Press to open the Redial list.r
2. Press . Scroll md to
Delete all
. The display shows
Conrm?
.
3. Press to conrm or mb to cancel.
3.8 Lock / unlock the keypad
You can lock the keypad so that it cannot be operated accidentally while carrying it around.
NOTE
When the keypad is locked, you can still answer incoming calls and operate the
handset normally during a call. When the call ends, the keypad lock resumes in place.
1. Press and hold . 0
Keys locked
is displayed.
2. To unlock the keypad, press and hold again.0
3.9 Paging / Find handset
Paging is a useful way to nd lost handsets.
1. Press on the base. All handsets ring.p
2. Press again to cancel the paging call or press any key on the handset to stop p
the paging call.
4. Phonebook
The C101xLX handset phonebook can store up to 50 names and numbers.
Names can be up to 14 characters long and numbers up to 24 digits.
4.1 Store a name and number
1. Press . m
Phonebook
is displayed.
2. Press . m
New Entry
is displayed.
3. Press . m
Enter Name
is displayed.
4. Enter a name and press . m
5. Enter a number. Press m to save.
6. Press e to return to standby.
ENTERING NAMES
Use the keypad letters to enter names, e.g. to store TOM:
Press once to enter T.8
Press 6 three times to enter O.
Press once to enter M.6
3.6 Hands-free
To talk to the caller without holding the handset or for other people in the room to
listen to the conversation over the loudspeaker simply use the hands-free function.
3.6.1 Make a hands-free call
1. Dial the number and then press .h
2. Press e to end the call.
3.6.2 Answer a call hands-free
Press to answer the call in hands-free.h
NOTE
Press to switch the call between the earpiece and the loudspeaker.h
During a hands-free call, press u or d to adjust the volume.
3.7 Redial
The last 10 entries dialed are stored in the redial list.
3.7.1 View or dial an entry
1. Press to open the Redial list.r
2. Scroll u or d to the entry you want.
3. Press to dial the displayed entry or press t e to return to standby.
3.7.2 Copy a Redial list number to the phonebook
1. Press to open the Redial list.r
2. Scroll u or d to the entry you want.
3. Press . The display shows m
Save number
.
4. Press again. The display shows m
Enter name
.
5. Enter the name and press . The number is displayed.m
6. Edit the number if necessary, then press m to save.
3.7.3 Delete an entry
1. Press to open the Redial list.r
2. Scroll .u or d to the entry you want. Press m
3. Scroll d to
Delete
and press . The display shows m
Conrm?
.
4. Press to conrm or mb to cancel.
3.5 Intercom
3.5.1 Make an internal call
If more than one handset is registered to the base, internal calls can be made
between two handsets. icon flashes and the display shows the handset number you
are calling.
1. If only 2 handsets are registered to the base, press and the other handset *
rings automatically.
2. If more than 2 handsets are registered to the base press and scroll *d to the
handset that is to be called and press
t.
3.5.2 Receive an internal call
When you receive an internal call, icon flashes and the handset number that is calling
you is displayed.
1. Press to make an internal call.t
3.5.3 Transfer a call
You can transfer an external call to another handset registered to the base.
During an external call:
1. If only 2 handsets are registered to the base, press and hold and the other *
handset rings automatically.
2. If more than 2 handsets are registered to the base press and hold and scroll *
dto the handset that is to be called and press .m
3. When the other handset answers, press e to complete the transfer.
NOTE
Your external call resumes automatically after 1 minute if there is no answer.
3.5.4 3-way conference call
You can hold a 3-way conference call between 2 internal callers and 1 external caller.
During a call with an external caller:
1. If only 2 handsets are registered to the base, press and hold and the other *
handset rings automatically.
2. If more than 2 handsets are registered to the base press and hold and scroll *
d to the handset that is to join the call and press .m
3. When the other handset answers, press to connect all three callers to begin m
the conference call.
4. Press e to end the call.
2. Getting to know your phone
Overview of your base
LED
Indicates when the answering
machine is on or o and
when you have messages.
Status Action
On answering machine on
O answering machine o
Flashes New message (s)
Volume Up
Adjust playback volume.
Ans On / O
Switches the answering
machine on / o.
Delete
Press to delete recorded
messages during playback .
Volume Down
Adjust playback volume.
Stop
Stops message playback.
Skip forward
Press to skip forward through
your answering machine
messages.
Skip back
Press to skip backward
through your answering
machine messages.
Page
In standby mode, press to
ring the handset(s).
Press and hold to enter
registration mode when
registering handsets.
Play
Play recorded messages.
Handset display
Display icons
Indicates signal strength.
Flashes when the handset is not registered to the base or if you are out of range.
Indicates a missed call.
Steady when making an outgoing call.
Flashes to indicate an incoming or internal call.
Indicates an incoming call when viewing the calls list.
Indicates an outgoing call when viewing the calls list.
Hands-free is on.
Handset ringer is o.
Answering machine is on.
Indicates new voicemail messages received . 1
O when there is no voicemail messages.
pq Indicates you can scroll through a list or adjust the volume in talk mode.
uIndicates more text after the displayed information.
fBattery is fully charged.
HBattery is partially charged.
lBattery is running low.
EFlashes when battery is almost fully discharged.
Overview of your handset
Earpiece
Display
Phonebook / Scroll Up /
Volume down
Open the phonebook.
Scroll up through lists and
menus.
Increase the earpiece volume.
Menu / OK
Enter the main menu.
Select the option
displayed on screen.
Conrm menu option.
Talk / Flash
Make or answer a call.
Use flash (F) functions.
* / Intercom
Press and hold to make
an internal call.
Dial a *.
Hands-free
Activate and deactivate
hands-free during a call.
IMPORTANT
Hands-free activation can
suddenly increase the
volume in the earpiece to
a very high level. Make
sure the handset is not
too close to your ear.
Redial
In standby mode, press
to open the redial list.
Clear / Back
Delete characters on screen
when entering names and
numbers.
Go back to previous menu
level is displayed on the
screen.
Call list / Scroll Down /
Volume down
Press to enter the Calls list.
Scroll down through lists
and settings.
During a call, press to
decrease earpiece volume.
When the phone is ringing,
press to decrease the
handset ringer volume.
End call / Switch handset
on/o
End a call.
When in a menu, go back
to standby mode.
Press and hold to switch
handset o (when in
standby) or on.
Pause / # / Change case
Press and hold to enter a
pause (P) when pre-dialling
or storing numbers.
Dial a #.
When entering letters /
editing, press and hold to
change the case from Abc
to abc or ABC mode.
When viewing the Calls
List press to change the
CID format.
Microphone
Mute
Mute / unmute the
microphone during a
call.
Handset display
1This feature is dependent on your Network Service provider supporting the service. A
subscription fee may be applicable.
Navigating the menus
Each menu has a list of options, which can be seen in detail on the menu map on the
below list.
When the handset is switched on and in standby mode:
1. Press to open the main menu.m
2. Then use buttons to scroll through the available options.u or d
3. Press to select an option. To return to the previous menu level,m
press . To exit the menu and return to standby, press .be
NOTE
If you do not press a button on the handset for 30 seconds the display will automatically
return to standby. It will also return to standby when the handset is placed on the base
or charger.
Menu map
Phonebook Battery tone Reset
View Phone name Answ. Machine
Add new PlayDate & time
Edit Language Delete all
Delete
1Services Announcement
Delete all1Call list type Voice answer
Phone setup Area code Ring delay
Sounds Remote accessFlash time
Ring volume Dial mode Voice Language
Ring tones Auto clock
Key tone Register
Docking tone Unregister
1Only available when an phonebook entry is already stored.
3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls. The call timer will
display after the rst 10 seconds of your call. When the call ends, the total duration of
your talk time is shown for 3 seconds.
3.1 Switch the handset on / o
Press and hold to switch the handset on or o.e
3.2 Calls
3.2.1 Make a call
1. Press .t
2. Dialing a telephone number.
3.2.2 Pre-dial
1. Use the keypad to dial a number, if you make a mistake press b to delete the
last digit.
2. Press t to dial.
3.2.3 End a call
Press , or place the handset back on the base or charger.e
3.2.4 Answer a call
When you receive an external call, the phone rings and icon flashes on the display.
1. Press t to answer the call.
3.3 Adjust the earpiece volume
During a call, press to increase or decrease the volume. There are 5 levels u or d
to choose from.
3.4 Mute
You can mute your handset so that you can talk to someone nearby without your caller
hearing.
1. During a call, press . The display shows M
Mute on
and your caller cannot hear
you.
2. Press again to resume your call.M
1. Getting started
IMPORTANT
Do not place your C101xLX in the bathroom or other humid areas.
Location
You need to place your C101xLX base within 6 feet of an electrical outlet and a
telephone wall socket to provide the power to supply the device and to connect to
telephone service.
Make sure it is at least 3 feet away from other electrical appliances to avoid interference.
Your C101xLX works by sending radio signals between the handset and base. The
strength of the signal depends on where you place the base. Putting it as high as
possible ensures the best signal.
HANDSET RANGE
The unit has a range of up to 650 feet outdoors when there is a clear line of sight
between the base and handset. Any obstruction between the base and handset will
reduce the range signicantly. With the base indoors and the handset either indoors or
outdoors, the range will normally be up to 100 feet. Thick concrete and stone walls can
severely aect the range.
SIGNAL STRENGTH
The icon on your handset indicates that you are within range of the base. When out of
range of the base, the icon disappears. If you are on a call, you will hear a warning beep.
If you are on a call, the line will hang up if the handset moves out of range of the base.
Move back within range. The handset will automatically re-connect to the base.
Setting up
IMPORTANT
Use only the power adapter and telephone line cord supplied with the product.
Connecting the base
1. Plug the telephone line cord into the socket marked on the rear of the base.
2. Plug the power adapter into the socket marked on the rear of the base and
plug the other end into the electrical outlet.
This User Guide provides you with all the information you need to
get the most from your phone.
Before you make your rst call you will need to set up your phone.
Follow the simple instructions in ‘Getting Started’, on the next
few pages.
IMPORTANT
Only use the telephone line cord and power adapter supplied.
Got everything?
• C101xLX base & cordless handset
• 1 x rechargeable Ni-MH battery pack
• Power adapter for the base
• Telephone line cord
• User Guide
• Quick Start Guide
If you have purchased a C101xLX multiple pack you will also have the following
items:
• Cordless handset & charger
• Rechargeable Ni-MH battery pack
• Power adapter for the charger
• Telephone line cord
Welcome...
to your new Motorola C101xLX Digital Cordless Telephone
with Answering machine!
• Answering machine up to 12 minutes digital recording time.
• All handsets are completely cordless and easy to locate with paging system.
• Bright backlit display.
• Speakerphone for hands-free conversations.
• 50 Name and Number phonebook.
• Caller ID shows you who’s calling and shows the details of the last 20 callers in
a Calls list.
1
• Redial up to 10 of the last numbers called.
• Register up to 4 handsets to a single base.
• Make internal calls and transfer external calls between handsets.
• Choose from 10 dierent ringtones.
Please note that this equipment is not designed for making emergency telephone
calls when the power fails. Alternative arrangements should be made for access
to emergency services.
Need help?
If you have any problems setting up or your using your C101xLX Digital Cordless
Telephone with Answering Machine, please contact Customer Service at
1-888-331-3383. Alternatively, you may nd the answer in the ‘Help’ section at the
back of this guide.
1You must subscribe to your network provider’s Caller ID service for this feature to
work. A subscription fee may apply.
Please note that this equipment is not designed for making emergency telephone
calls when power fails. Alternative arrangements should be made for access to
emergency services.
Manufactured, distributed or sold by Binatone Technologies Ltd., oicial licensee
for this product. MOTOROLA and the Stylized M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other
trademarks are the property of their respective owners. © 2014 Motorola Mobility LLC.
All rights reserved.
Version 18(EN-US)
Models: C1011LX, C1012LX, C1013LX and C1014LX
Digital Cordless Telephone with
Answering Machine

Produkt Specifikationer

Mærke: Motorola
Kategori: Telefon
Model: C1011LX

Har du brug for hjælp?

Hvis du har brug for hjælp til Motorola C1011LX stil et spørgsmål nedenfor, og andre brugere vil svare dig


Telefon Motorola Manualer

Motorola

Motorola L703C Manual

5 Oktober 2024
Motorola

Motorola L702C Manual

2 Oktober 2024
Motorola

Motorola D403 TRIO Manual

4 August 2024
Motorola

Motorola D502 Duo Manual

3 August 2024
Motorola

Motorola Moto G53 5G Manual

1 August 2024
Motorola

Motorola ME7050 Manual

31 Juli 2024
Motorola

Motorola C401A Manual

29 Juli 2024
Motorola

Motorola Moto G2 Manual

29 Juli 2024
Motorola

Motorola D201 Manual

27 Juli 2024
Motorola

Motorola D1003 Trio Manual

26 Juli 2024

Telefon Manualer

Nyeste Telefon Manualer

HTC

HTC Desire 19+ Manual

15 December 2024
Ranex

Ranex RX 6031 Manual

15 December 2024
Vtech

Vtech DS6611-2 Manual

14 December 2024
Vtech

Vtech DS6771-3 Manual

14 December 2024
Vtech

Vtech DS6161 Manual

14 December 2024
Vtech

Vtech DS6621-2 Manual

14 December 2024
Vtech

Vtech CS6114-21 Manual

14 December 2024
Panasonic

Panasonic KX-TGU410 Manual

14 December 2024
Vtech

Vtech CS6124-21 Manual

13 December 2024
Vtech

Vtech CS6929-3 Manual

13 December 2024