Moxa ioLogik E2242 Manual

Moxa Ikke kategoriseret ioLogik E2242

Læs nedenfor 📖 manual på dansk for Moxa ioLogik E2242 (106 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/106
Click&Go V2 Users Manual
Second Edition, December 2008
www.moxa.com/product
© 2008 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.
Click&Go V2 User’s Manual
The software described in this manual is furnished under a license agreement, and may be used only in
accordance with the terms of that agreement.
Copyright Notice
Copyright © 2008 Moxa Inc.
All rights reserved.
Reproduction without permission is prohibited.
Trademarks
MOXA is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice, and does not represent a commitment on the
part of Moxa.
Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but
not limited to, its particular purpose. Moxa reserves the right to make improvements, and/or changes to this
manual, or to the products, and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate, and reliable. However, Moxa assumes no
responsibility for its use, or for any infringements on the rights of third parties that may result from its use.
This manual might include unintentional technical or typographical errors. Changes are made periodically to the
information herein to correct such errors, and these changes are incorporated into new editions of the manual.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll-free: 1-888-669-2872
Tel: +1-714-528-6777
Fax: +1-714-528-6778
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel: +86-21-5258-9955
Fax: +86-10-6872-3958
Moxa Europe:
Tel: +49-89-3 70 03 99-0
Fax: +49-89-3 70 03 99-99
Moxa Asia-Pacific:
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
Table of Contents
Chapter 1. Introduction ...............................................................................................1-1
Overview .............................................................................................................................. 1-2
Click&Go V2 Features ......................................................................................................... 1-3
Product and Software Support ...................................................................................... 1-3
Difference in Programming Method and Space............................................................ 1-4
Difference in IF Conditions.......................................................................................... 1-5
Difference in THEN/ELSE Actions ............................................................................. 1-6
Click&Go Version Check............................................................................................. 1-7
Chapter 2. Getting Started ..........................................................................................2-1
Hardware Connection........................................................................................................... 2-2
System Requirements ................................................................................................... 2-2
Connecting to the Network........................................................................................... 2-3
Optional Liquid Crystal Display Module (LCM) ......................................................... 2-3
Adding More I/O Channels .......................................................................................... 2-3
Connecting the I/O Device ........................................................................................... 2-4
Software Preparation ............................................................................................................ 2-4
ioAdmin 3.x Installation............................................................................................... 2-4
Firmware Update.......................................................................................................... 2-7
Reset to Factory Default............................................................................................... 2-8
Chapter 3. Click&Go V2 Developing Process ...........................................................3-1
Click&Go V2 Development Process .................................................................................... 3-2
I/O Configuration ................................................................................................................. 3-2
Configurable DIO Channel Mode Selection................................................................. 3-2
Digital Input Mode Selection........................................................................................ 3-3
Digital Output Mode Selection..................................................................................... 3-4
Analog Input Mode Selection....................................................................................... 3-5
Analog Output Mode Selection .................................................................................... 3-6
Temperature Input Mode Selection .............................................................................. 3-6
Alias Name Configuration............................................................................................ 3-8
Testing the I/O Channels .............................................................................................. 3-9
Define Global Variables........................................................................................................ 3-9
Internal Register Settings............................................................................................ 3-10
Timer Settings............................................................................................................. 3-10
SNMP Trap Server ..................................................................................................... 3-11
E-Mail Server ............................................................................................................. 3-11
Active Message Server............................................................................................... 3-12
Work with Logic................................................................................................................. 3-13
Click&Go Logic Basics.............................................................................................. 3-13
IF Conditions.............................................................................................................. 3-16
More Info on Repeat Interval vs. Edge Detection ...................................................... 3-26
THEN/ELSE Actions.................................................................................................. 3-29
Peer-to-Peer Function................................................................................................. 3-42
Activating the Rule-set....................................................................................................... 3-45
Download, Restart and Run........................................................................................ 3-45
Rule-set Management Bar .......................................................................................... 3-45
Import/Export Configuration.............................................................................................. 3-46
Using ioAdmin to Import/Export Configuration ........................................................ 3-46
Using TFTP to Import/Export Configuration ............................................................. 3-48
Chapter 4. Click&Go Examples and Applications ....................................................4-1
Click&Go Rule 101.............................................................................................................. 4-2
IF-THEN-ELSE............................................................................................................ 4-2
Where there is an ON Logic, there should be an OFF Logic........................................ 4-2
Rules are Running in a Loop ........................................................................................ 4-2
Using the Timer Function..................................................................................................... 4-3
Heartbeat or Repeat Actions......................................................................................... 4-3
ON-Delay ..................................................................................................................... 4-4
OFF-Delay.................................................................................................................... 4-5
Using Internal Registers ....................................................................................................... 4-5
Soft-key ........................................................................................................................ 4-5
Remote Control............................................................................................................. 4-5
Programming Examples ....................................................................................................... 4-6
Local I/O Control.......................................................................................................... 4-6
Active I/O Messages..................................................................................................... 4-7
Peer-to-Peer I/O............................................................................................................ 4-9
Applications_1.................................................................................................................... 4-12
Project Background .................................................................................................... 4-12
Application Requirements .......................................................................................... 4-12
Moxa Solution ............................................................................................................ 4-12
Solution Benefits ........................................................................................................ 4-12
Additional Features..................................................................................................... 4-13
System Diagram ......................................................................................................... 4-13
Click&Go Programming Example.............................................................................. 4-14
Applications_2.................................................................................................................... 4-15
Project Background .................................................................................................... 4-15
Application Requirements .......................................................................................... 4-15
Moxa Solution ............................................................................................................ 4-15
Solution Benefits ........................................................................................................ 4-15
Additional Features..................................................................................................... 4-16
System Diagram ......................................................................................................... 4-16
Click&Go Programming Example.............................................................................. 4-16
Applications_3.................................................................................................................... 4-18
Project Background .................................................................................................... 4-18
Application Requirements .......................................................................................... 4-18
Moxa Solution ............................................................................................................ 4-18
Solution Benefits ........................................................................................................ 4-18
Additional Features..................................................................................................... 4-19
System Diagram ......................................................................................................... 4-19
Click&Go Programming Example.............................................................................. 4-20
Applications_4.................................................................................................................... 4-21
Project Background .................................................................................................... 4-21
Application Requirements .......................................................................................... 4-21
Moxa Solution ............................................................................................................ 4-21
Solution Benefits ........................................................................................................ 4-21
Additional Features..................................................................................................... 4-22
System Diagram ......................................................................................................... 4-22
Click&Go Programming Example.............................................................................. 4-22
Applications_5.................................................................................................................... 4-24
Project Background .................................................................................................... 4-24
Application Requirements .......................................................................................... 4-24
Moxa Solution ............................................................................................................ 4-24
Solution Benefits ........................................................................................................ 4-24
Additional Features..................................................................................................... 4-25
System Diagram ......................................................................................................... 4-25
Click&Go Programming Example.............................................................................. 4-25
Applications_6.................................................................................................................... 4-27
Project Background .................................................................................................... 4-27
Application Requirements .......................................................................................... 4-27
Moxa Solution ............................................................................................................ 4-27
Solution Benefits ........................................................................................................ 4-27
Additional Features..................................................................................................... 4-28
System Diagram ......................................................................................................... 4-28
Click&Go Programming Example.............................................................................. 4-29
Applications_7.................................................................................................................... 4-30
Project Background .................................................................................................... 4-30
Application Requirements .......................................................................................... 4-30
Moxa Solution ............................................................................................................ 4-30
Solution Benefits ........................................................................................................ 4-31
Additional Features..................................................................................................... 4-31
System Diagram ......................................................................................................... 4-31
Click&Go Programming Example_Site ..................................................................... 4-32
Click&Go Programming Example_Central................................................................ 4-35
Appendix A. Internal Registers – Modbus/TCP Address Mappings .......................... A-1
ioLogik E2210, E2212 and E2214....................................................................................... A-1
4xxxx Read/Write Registers (Functions 3, 6, 16)........................................................ A-1
ioLogik E2240, E2242, E2260 and E22262........................................................................ A-2
4xxxx Read/Write Registers (Functions 3, 6, 16)........................................................ A-2
1
1
1
11
1
1
1
11
Chapter 1. Introduction
Click&Go TM is the local control logic for the Moxa ioLogik series Active Ethernet I/O server,
which transforms the ioLogik series from a traditional passive Ethernet I/O to an active Ethernet
I/O. With Click&Go, users have complete control over what, when and where they transmit.
The following topics are covered in this chapter:
Overview
Click&Go V2 Features
¾ Product and Software Support
¾ Difference in Programming Method and Space
¾ Difference in IF Conditions
¾ Difference in THEN/ELSE Actions
¾ Click&Go Version Check
Click&Go V2 User’s Manual Introduction
1-2
Overview
Everybody can be a programmer! Moxa’s Click&Go local control logic for the ioLogik Active
Ethernet I/O server eliminates the cumbersome programming generally required for data
acquisition, alarm messaging, and local control tasks. No knowledge of C-language or PLC ladder
is required for field applications. Instead, users familiar with IF-THEN-ELSE statements will have
no problem understanding the Click&Go interface and will be able to control I/O channels and
alarm messaging after a few simple steps. The configuration utility also makes the control process
easy to define and configure. Simply download the control logic to the ioLogik Active Ethernet
I/O server and Click&Go will be ready-to-go in no time.
Click&Go performs various functions including local I/O control, remote output control, alarm
generation and messaging, and event-driven or time-based I/O status reporting.
Click&Go eliminates the need for host computers to continually poll I/O devices for status. Instead,
the server itself is able to monitor the status of each I/O device and take the appropriate action
when the I/O status satisfies a user-defined condition. For example, users may need to configure
the Moxa ioLogik Active Ethernet I/O servers to send a TCP/UDP message only when the switch
attached to DI-0 is turned on. This event-based structure results in a much improved response time
and a much reduced load on the host computers CPU and on network bandwidth.
Simple IF–THEN–ELSE statements are used to specify conditions that are required for certain
actions to take place. Up to three conditions, three actions and three opposite actions (ELSE) can
be combined in a rule, and you can define up to 24 rules. Supported actions include sending SNMP
traps or TCP/UDP messages to up to 10 hosts at a time.
Click&Go can also be used to map an input channel on one Moxa ioLogik Active Ethernet I/O
server to an output channel on another ioLogik for peer-to-peer I/O communication. Up to five
different IP addresses can be entered as the output destination. Peer-to-peer I/O provides a very
flexible and easy way to extend I/O signals or connect remote on/off switches. It can be used, for
example, to replace or extend the wiring of PLC or DCS systems over Ethernet.
Click&Go V2 User’s Manual Introduction
1-3
Click&Go V2 Features
24 Rules for IF-THEN-ELSE Style Programming
Users do not require any programming experience to use Click&Go. The easy and straightforward
IF-THEN-ELSE programming style greatly simplifies the development and installation of I/O
applications. With 24 IF-THEN-ELSE rules pre-installed and up to 3 IF conditions and 3
THEN/ELSE outputs or network actions per rule, Click&Go is suitable for most remote
monitoring and alarm applications.
Local Monitoring and Local Control
Click&Go can continually monitor the local I/O status for each input channel, trigger the status, or
direct it to local output channels.
Remote Control and Control by Remote
Click&Go is capable of accepting control commands from a remote host or an ioLogik. In addition,
it can send out commands to remotely control another ioLogik.
Time-stamped Active Messaging
All alarms, messages, e-mail notices, and TCP, UDP, and SNMP traps are time-stamped with the
exact time of the events.
Peer-to-peer I/O
Peer-to-peer I/O can be used to set up I/O mapping over Ethernet from the DI channel on one
ioLogik to the DO channel on another ioLogik.
Product and Software Support
Although the current ioLogik E2000 series comes pre-installed with the original Click&Go V1
local control logic, the new Click&Go V2 offers more powerful functions to meet the needs of
different applications. This User’s Manual describes all the functions of Click&Go V2, which
comes with the following products.
Product
Category Model Communication
Interface Input/Output Firmware
Ver sion
ioAdmin
Ver sion
Active
Ethernet I/O ioLogik E2210 Ethernet 12 DI, 8DO 3.0 V3.0
ioLogik E2212 8 DI, 8DO, 4 DIO 3.0 V3.0
ioLogik E2214 6 DI, 6 Relay 3.0 V3.0
ioLogik E2240 8 AI, 2 A0 3.0 V3.1
ioLogik E2242 4 AI, 12 DIO 3.0 V3.1
ioLogik E2260 6 RTD, 4 DO 3.0 V3.1
ioLogik E2262 8 TC, 4 DO 3.0 V3.1
Click&Go V2 User’s Manual Introduction
1-5
Difference in IF Conditions
*Click&Go V1.0 1Click&Go V1.1 Click&Go V2.x
Input Channel Status
Digital Input Counter
Timer Trigger
*2Relay Counter
*1Delay Timer *1
Timer
Internal Register *1
Remote Action
Schedule
Host Connection Fail
Click&Go V2 User’s Manual Introduction
1-7
Click&Go Version Check
The best way to verify the current version of the firmware or Click&Go is to run the ioAdmin
configuration utility. After a broadcast search for the ioLogik on the network, ioAdmin displays
the information on itsServer Info.” tab. Refer to the related sections of the product users manual
for detailed information on software installation and other operations such as firmware upgrade.
Click&Go User’s Manual Getting Started
2-5
ioAdmin Main Screen
1. Title 2. Menu Bar
3. Quick Link 4. Navigation Panel
5. Main Window 6. Sync. Rate Status
7. Status Bar
The ioAdim can be found in the product CD, or download the latest version on Moxas Website.
1. Installation from CD: Insert the Document and Software CD into the host computer. In the
Software/ioAdmin directory of the CD, locate and run SETUP.EXE. The installation program
will guide you through the installation process and install the ioAdmin utility.
2. Open ioAdmin: After installation is finished, run ioAdmin from the Windows Start menu:
Start Æ
Æ
Æ
ÆÆProgram Files Æ
Æ
Æ
ÆÆMOXA Æ
Æ
Æ
ÆÆIO Server Æ
Æ
Æ
ÆÆUtility Æ
Æ
Æ
ÆÆ ioAdmin.
3. Search the network for ioLogik: When ioAdmin is started, it will automatically run the auto
search program. Or find it on the menu bar, select System
Æ
Æ
Æ
ÆÆAuto Scan Active Ethernet I/O.
A dialog window will appear. Click Start Search to begin searching for your unit.
Click&Go User’s Manual Getting Started
2-8
Reset to Factory Default
If there is an ioLogik that has been configured before, it is recommended to reset it to the factory
default. Performing this task, users may right click on the selected ioLogik in the ioAdmin, click
on the “Load Factory Default” link on the ioLogiks web console using a browser, or, press the
RESET button on the ioLogik for 10 seconds.
RESET


Produkt Specifikationer

Mærke: Moxa
Kategori: Ikke kategoriseret
Model: ioLogik E2242

Har du brug for hjælp?

Hvis du har brug for hjælp til Moxa ioLogik E2242 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Moxa Manualer

Moxa

Moxa OnCell G3150 Manual

23 August 2024
Moxa

Moxa M-3411 Manual

23 August 2024
Moxa

Moxa M-1600 Manual

23 August 2024
Moxa

Moxa TCC-82-RP Manual

23 August 2024
Moxa

Moxa UPort 1410 Manual

23 August 2024
Moxa

Moxa M-1450 Manual

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer