Netgear ANT2407 Manual


Læs nedenfor 📖 manual på dansk for Netgear ANT2407 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
)NSTALLATION'UIDE
Extended wireless network coverage: 400~450 M. The actual indoor range will be
affected by the local environment.
Note: For optimal results in extending wireless range with antenna installations, consult a
qualified professional installer service for a site survey and proper installation. For a list of
devices approved by the FCC for use with the antenna, see the NETGEAR website at
http://tools.netgear.com/legal/fcc_antennas.html.
Warning: Keep the antenna 15 cm (6 in) away from
notebook computers and monitors.
400~450 M
To maximize coverage and performance, place the antenna within the line of sight of your
wireless devices. Minimize partitions and objects that block the line of sight if possible.
The antenna can be placed on a flat surface, wall mounted, or magnet mounted.
If wall-mounting, place the antenna on an interior wall above cubicles (cubicles
generally include a metal foil). Ideal placement is 2 meters (6.5 feet) high.
If the wireless access point, router, or gateway, is in an IT room, place the antenna
outside the room against a a wall and close to the ceiling.
The area close to, behind, or beside the antenna will be covered, because the dynamic
range of the WLAN transmitter/receiver and antenna is approximately 100 dB. Even
with 20 dB to 40 dB or attenuation, the signal strength is still strong and
communication is maintained.
The antenna has magnets in the base, which can be used to mount it on metal cabinets,
white boards, or even the ceiling cross bars (the framework that holds the ceiling
panels up).
Omni-directional
antenna ANT2407
Approximate
coverage area
Magnet mounting
on a whiteboard
Turn off your wireless access point, and connect your ANT2407 antenna. Note that the
antenna has a RP SMA female reverse connector. If your wireless access point is new,
follow the access point installation instructions. If you are upgrading an existing access
point, turn it on again.
Wireless Device with 1 Antenna
Wireless Device with 2 Antennas: Replacing the Primary Antenna
Wireless Device with 2 Antennas: Replacing Both
Wireless access point
Wireless access point
Wireless access point


Produkt Specifikationer

Mærke: Netgear
Kategori: Ikke kategoriseret
Model: ANT2407

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear ANT2407 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Netgear Manualer

Netgear

Netgear JGS516 Manual

4 Oktober 2024
Netgear

Netgear GS108Ev4 Manual

30 September 2024
Netgear

Netgear Orbi RBE972SB Manual

26 September 2024
Netgear

Netgear Orbi RBK652S Manual

24 September 2024
Netgear

Netgear Nighthawk MS90 Manual

24 September 2024
Netgear

Netgear ProSafe AX745 Manual

22 September 2024
Netgear

Netgear ANT2409v2 Manual

22 September 2024
Netgear

Netgear FS517TS Manual

15 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024