Netgear XAVB1201 Manual


Læs nedenfor 📖 manual på dansk for Netgear XAVB1201 (2 sider) i kategorien Powerline adapter. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
NETGEAR, the NETGEAR logo, and Connect
with Innovation are trademarks and/or
registered trademarks of NETGEAR, Inc. and/
or its subsidiaries in the United States and/or
other countries. Information is subject to
change without notice. © NETGEAR, Inc. All
rights reserved.
For indoor use only. Valid for sale in all EU
member states, EFTA states, and Switzerland.
March 2013
Installation Guide
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
LED and Button Descriptions
Item Description
Power LED Solid green. The electrical power is on.
Solid amber. The adapter is in power saving
mode. Power saving mode is disabled by default.
Blinking green. The adapter is in the process of
setting up security.
Off. There is no electrical power.
Ethernet
LED
Solid. The adapter is connected through the
Ethernet port to a powered-on Ethernet device.
Off. There is no Ethernet connection.
Powerline LED
Power LED
Ethernet LED
Factory Reset button
Security button
Powerline 100 (2-pack) XAVB1201
Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the
label of your product and use it to register your product at
https://my.netgear.com.
You must register your product before you can use NETGEAR
telephone support. NETGEAR recommends registering your
product through the NETGEAR website.
For product updates and web support, visit
http://support.netgear.com.
NETGEAR recommends that you use only the official
NETGEAR support resources.
You can get the user manual online at
http://downloadcenter.netgear.com or through a link in the
product’s user interface.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Package Contents
WARNING: Do not press the Security button on the Powerline
adapter until installation is complete and the adapters are
communicating with each other (indicated by the blinking Powerline
LED). Pressing this button too soon can temporarily disable Powerline
communication. If Powerline communication is disabled, use the
Factory Reset button to return the Powerline adapter to its factory
default settings.
Powerline
LED
Solid. The adapter is connected to a Powerline
network.
Off. The adapter has not found any other
compatible Powerline devices using the same
encryption key.
The Pick A Plug feature lets you pick the electrical
outlet with the fastest link rate, indicated by the color
of the LED.
Green: Link
rate > 80 Mbps
(Fast)
Amber: Link rate >
50 and < 80 Mbps
(Medium)
Red: Link
rate < 50
Mbps (Slow)
Factory
Reset
Press the Reset button for 1 second, then release it
to return the Powerline adapter to its factory default
settings.
Security
Button
After you plug in your new adapter, press the
Security button for 2 seconds, then press the
Security button on one of the other adapters in your
existing network for 2 seconds. Both buttons must be
pressed within 2 minutes.
To enable power saving mode, press and hold the
Security button for 10 seconds or more, then release
it. Pressing the Security button again powers the
adapter back on.
Item Description
Ethernet Cables
Powerline 100
Mini Adapters


Produkt Specifikationer

Mærke: Netgear
Kategori: Powerline adapter
Model: XAVB1201

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear XAVB1201 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Powerline adapter Netgear Manualer

Powerline adapter Manualer

Nyeste Powerline adapter Manualer

D-Link

D-Link DHP-W220AV Manual

6 Oktober 2024
TP-Link

TP-Link TL-WPA7817 Manual

3 Oktober 2024
TP-Link

TP-Link AV1000 Manual

2 Oktober 2024
LevelOne

LevelOne PLI-3510 Manual

29 September 2024
TP-Link

TP-Link TL-PA4020PT Manual

29 September 2024
Mikrotik

Mikrotik PWR-Line AP Manual

20 September 2024
Sitecom

Sitecom LN-520 Manual

15 September 2024
TP-Link

TP-Link TL-PA8010 Manual

11 September 2024