Nilfisk SCRUBTEC 130 E Manual

Nilfisk Ikke kategoriseret SCRUBTEC 130 E

Læs nedenfor 📖 manual på dansk for Nilfisk SCRUBTEC 130 E (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Nilfisk A/S
Kornmarksvej 1
DK-2605 Brøndby
Denmark
Tel.: +45 43 23 40 50
Fax: +45 43 43 77 00
mail.com@nilfisk.com
www.nilfisk.com
Operating guidelines
- SCRUBTEC 130 E
ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
Click
19. Clean the machine using a damp
cloth and where needed use a
neutral cleaning product. Then
store the machine in a clean and
dry place.
17. Unscrew by turning the knob
clockwise to remove the cylindrical
brush.
18. Clean the squeegee bars and the
cylindrical brush with water.
16. Remove the squeegee bars.
14. Empty the recovery and solution
tank. Clean them with water.
13. Disconnect the power plug from
the electrical socket and rewind
the cable from the machine and
place it in the cable holder.
11.
To use the manual suction hose press
the main button to start the machine
in upright position. Turn the hose
connection to ON and use the suction
tube. When done press the switch and
turn hose connection to OFF. (**)
12. Park the machine in upright
position and turn off the main
switch.
15. Check and clean the solution and
vacuum filter regularly.
10. When necessary, empty the
recovery and refill the solution tank
to continue working.
7. When machine is in working
position press the main button and
start cleaning.
6. For double scrubbing, use the pedal
to lift/lower squeegees.
8. Make sure also the solution switch is
on and in same position as the main
switch.
9. Move the machine with the handle
and start cleaning the floor.
2. Fill the solution tank with a clean
water. The clean water temperature
must not exceed 40 °C.
3. The tank cap can be used for dosing
the detergent. One full cap is 30ml
giving 1% detergent of the 3L tank
capacity. (*)
4. Connect the power plug to the
electrical socket.
1. Release the handle to remove the
tank assembly.
5. Use the orange pedal to put the
machine in working position.
(*) ALWAYS FOLLOW THE DETERGENT DOSING RECOMMENDATION ON THE LABEL OF THE CHEMICAL PRODUCT USED.
(**) THE MANUAL SUCTION HOSE IS AN OPTIONAL ACCESSORY.


Produkt Specifikationer

Mærke: Nilfisk
Kategori: Ikke kategoriseret
Model: SCRUBTEC 130 E

Har du brug for hjælp?

Hvis du har brug for hjælp til Nilfisk SCRUBTEC 130 E stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Nilfisk Manualer

Nilfisk

Nilfisk FM400L Manual

7 December 2024
Nilfisk

Nilfisk VHS 42 MC Manual

1 September 2024
Nilfisk

Nilfisk R104 Manual

28 August 2024
Nilfisk

Nilfisk A136 Manual

25 August 2024
Nilfisk

Nilfisk VHW421 Manual

21 August 2024
Nilfisk

Nilfisk VHW311 Manual

21 August 2024
Nilfisk

Nilfisk VHW211 Manual

21 August 2024
Nilfisk

Nilfisk SC800 Manual

21 August 2024
Nilfisk

Nilfisk R305 Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Atlona

Atlona AT-DVIF30S-IR Manual

29 December 2024
Atlona

Atlona AT-PRO3HD66M Manual

29 December 2024
Atlona

Atlona AT-3GSDI500 Manual

29 December 2024
BlueBuilt

BlueBuilt BBMAG2M Manual

29 December 2024
Atlona

Atlona AT-3GSDI-14 Manual

28 December 2024
Atlona

Atlona AT-COMP10SS Manual

28 December 2024
Atlona

Atlona AT-2VGA300SL Manual

28 December 2024
Atlona

Atlona AT-HD-V216 Manual

28 December 2024
Atlona

Atlona AT-VGA11S Manual

28 December 2024
True

True TC900 Manual

28 December 2024