NUVO Bridgeview 60/1711 Manual

NUVO Lettelse Bridgeview 60/1711

Læs nedenfor 📖 manual på dansk for NUVO Bridgeview 60/1711 (2 sider) i kategorien Lettelse. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
ASSEMBLY INSTRUCTION
SKU#60/1711
NOTE: Please consult a qualified electrician if you are not certain of installation or servicing.
CAUTION: Before starting installation or servicing, disconnect power by turning off the circuit breaker or
by removing the fuse at the fuse box.
1. Carefully unpack the fixture, lay out all parts on a clean surface.
2. Attach the Mounting Strap to Outlet Box using the provided Outlet Box Screws.
3. Connect wires white to white and black to black. Cover connections with provided Wire Connectors. Tie
ground wires from Outlet Box and from fixture to the Ground Screw on the Mounting Strap.
4. Place the Wall Plate against Outlet Box and tighten the Lock Nut to the Nipple until the fixture body is
held firmly to the wall.
5. Unscrew Socket Rings from Sockets. Place Shades over Sockets and reattach Socket Rings to Sockets to
secure the Shades.
6. Install the Bulbs. (Not included).
7. Turn on power.
A Satco Product


Produkt Specifikationer

Mærke: NUVO
Kategori: Lettelse
Model: Bridgeview 60/1711

Har du brug for hjælp?

Hvis du har brug for hjælp til NUVO Bridgeview 60/1711 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse NUVO Manualer

Lettelse Manualer

Nyeste Lettelse Manualer