Nxzen nx 6000 Manual

Nxzen Sund nx 6000

Læs nedenfor 📖 manual på dansk for Nxzen nx 6000 (2 sider) i kategorien Sund. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Sales Information Memo
nX6000 Pairing
In Store: ‘Plug-n-Pair’
1. Connect a charging cable to the nX6000. This may be the cable provided
with the headset or any other standard mini-B USB cable.
2. The nX6000 will appear to charge normally, displaying a solid RED LED;
however the nX6000 will immediately and automatically become
discoverable for Bluetooth® pairing.
3. Activate the mobile phone's Bluetooth feature and commence pairing. The
headset is detected as "nX6000" and the PIN code/PASSKEY is “0000”.
4. Successful pairing is confirmed when the LED momentarily changes from
solid RED to flashing VIOLET.
5. After successful pairing, the headset will be off and charging continues as
normal (solid RED LED while charging, solid BLUE LED when finished)
6. Disconnect the charger at any time after pairing is complete.
Notes: a) The nX6000 is only discoverable for the first 5 minutes after a charge cable is
inserted. If this period expires, before successful pairing is achieved, simply
disconnect then reconnect the charge cable to start the nX6000 pairing process
again.
b) Plug-n-Pair will only work with nX6000’s that have not been previously paired.


Produkt Specifikationer

Mærke: Nxzen
Kategori: Sund
Model: nx 6000

Har du brug for hjælp?

Hvis du har brug for hjælp til Nxzen nx 6000 stil et spørgsmål nedenfor, og andre brugere vil svare dig