Panasonic DP-111-E-P-J Manual


Læs nedenfor 📖 manual på dansk for Panasonic DP-111-E-P-J (5 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 31 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
INSTRUCTION MANUAL
DP-100 Series
High-performance Digital DisplayPressure Sensor
WARNING
Thank you very much for using SUNX products. Please read this
Instruction Manual carefully and thoroughly for the correct and optimum
use of this product. Kindly keep this manual in a convenient place for quick
reference.
٨
٨
٨
Never use this product as a sensing device for personnel protection.
In case of using sensing devices for personnel protection, use products
which meet laws and standards, such as OSHA, ANSI or IEC etc., for
personnel protection applicable in each region or country.
Japanese Measurement Laws prohibit the use of this product in Japan.
NAMES OF EACH PART1
Connection
connector
DP-100
type: R
1
8
+ M5 female screw
DP-100-E
type: G
1
8
+ M5 female screw
DP-100-N
type:
NPT
1
8
+ M5 female screw
Pressure port
DP-100
Main display
Sub-display
Setting value
DOWN key
Setting value UP key
٨When connecting a commercial coupler to the pressure port, attach a
12mm spanner (14mm for type) to the pressure port's hexa-DP-100-E
gon section to fix the port, and then tighten with a tightening torque of
9.8Nm or less. The commercial coupler or pressure port section will be
damaged if the tightening torque is excessive.
Wrap sealing tape around the coupler when connecting to prevent leaks.
PIPING2
Standard type:
Lights up when compa-
rative
output 2 is ON
High-function type:
Lights up when analog
voltage output is set
Output 2 / analog
voltage output oper-
ation indicator
Lights up when compa-
rative output 1 is ON
Output 1 operation
indicator
Mode selection key
MJE-DP100 No.6091-00
12mm spanner
MOUNTING3
٨The sensor mounting bracket (MS-DP1-1)is available as an option.
When mounting the sensor onto the sensor mounting bracket, etc., the
tightening torque should be 1.2N m or less.
Sensor mounting bracket
MS-DP1-1 (Optional)
M3 (length 6mm) screws
with washers
(Accessory with MS-DP1-1)
٨The panel mounting bracket (optional) and front coverMS-DP1-2
MS-DP1-3 (optional) are also available as options.
Front cover
MS-DP1-3 (Optional)
31
31
(Unit: mm)
Panel cut-out size
Panel mounting bracket
MS-DP1-2 (Optional)
M3 (length 12mm) pan head
screw
(Accessory with MS-DP1-2)
For use outside Japan
Connection method
Disconnection method
Note: Do not pull by holding the cable without pressing the release lever, as this can
cause cable break.
٨
Insert the cable with connector CN-14A-Cغ
into this product's connection connector
section as shown in the right figure.
٨Pressing the release lever of the cable
with connector, pull out the cable.
WIRING4
Cable with connector
CN-14A-Cغ
Release lever
Ԙ ԙ Ԛ ԛ
<Connection connector pin arrangement>
Connector pin No.
Terminal name
+VԘ
Comparative output 1ԙ
Standard type: Comparative output 2
High-function type: Analog voltage output or external input
Ԛ
0Vԛ
<Recommended product>
Contact: SPHD-001T-P0.5
Housing: PAP-04V-S
[JST Mfg. Co., Ltd.]
Standard type
Users' circuitInternal circuit
+
_12 to 24V DC
±10%
(Black)
Comparative output 1
Main circuit
(White) Comparative output 2
(Blue) 0V
100mA max.
100mA max.
Load
Load
Main circuit
High-function type
Users' circuitInternal circuit
+
_12 to 24V DC
±10%
(White)
Analog voltage output
or external input
(Black) Comparative output 1
(Blue) 0V
100mA max.
5V
1kΩ
Load
PNP output type
Standard type
Main circuit
Users' circuitInternal circuit
+
_12 to 24V DC
±10%
(Black) Comparative output 1
(White) Comparative output 2
(Blue) 0V
100mA max.
100mA max.
Load
Load
NPN output type
When using the analog voltage output, take care to the input impedance of
the connected device.
Furthermore, note that if the cable is extended, the cable resistance will
cause the voltage to drop.
I/O CIRCUIT DIAGRAMS5
High-function type
Main circuit
(Black) Comparative output 1
Users' circuitInternal circuit
+
_12 to 24V DC
±10%
(Blue) 0V
(White)
Analog voltage output
or external input
1kΩ
100mA max.
Load
(Brown)V
Color code of cable with connector
(Brown)V
Color code of cable with connector
(Brown)V
Color code of cable with connector
(Brown)V
Color code of cable with connector


Produkt Specifikationer

Mærke: Panasonic
Kategori: Ikke kategoriseret
Model: DP-111-E-P-J

Har du brug for hjælp?

Hvis du har brug for hjælp til Panasonic DP-111-E-P-J stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Panasonic Manualer

Panasonic

Panasonic KX-HN1003 Manual

25 November 2024
Panasonic

Panasonic MK-F511 Manual

25 November 2024
Panasonic

Panasonic NB-G200 Manual

24 November 2024
Panasonic

Panasonic AW-SF200Z Manual

8 November 2024
Panasonic

Panasonic AW-PS551PJ Manual

7 November 2024
Panasonic

Panasonic ER-CFC1 Manual

26 September 2024
Panasonic

Panasonic RP-SDW48GE1K Manual

14 September 2024
Panasonic

Panasonic C-D535AF Manual

5 September 2024
Panasonic

Panasonic ES-WM31 Manual

5 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024