Panasonic TH-37PW5HZ Manual
Læs nedenfor 📖 manual på dansk for Panasonic TH-37PW5HZ (44 sider) i kategorien TV. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/44
®
R -
STAN DB
Y
G
P OWE R O N
INPU T
—
VOL
+
PO
WER
/
PLASMA DISPLAY
TQBC0429-1
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this
manual for future reference.
English
Progressive Wide Plasma Display
Operating Instructions
TH-37PW5
TH-42PW5
Model No.
26
Set up TIMER
The timer can switch the Plasma Display On or Off.
Before attempting Timer Set, confirm the PRESENT TIME and adjust if necessary.
Then set POWER ON Time / POWER OFF Time.
Display the Set up TIMER screen
To set up PRESENT TIME, follow the procedure described below.
Press to set up Hours or Minutes.
button: Forward
button: Back
SET UP
INPUT
SURROUND
VOL
N
PICTURE SOUND SET UP
R
PRESENT TIME Setup
PRESENT TIME
Hours Adjustment
99 : 99
00
Minutes Adjustment 00
PRESENT TIME Setup
PRESENT TIME
Hours Adjustment
0 : 52
00
Minutes Adjustment 52
Press to display the
Setup menu screen.
Press to select
Set up TIMER.
Press to display
the Set up TIMER
screen.
PRESENT TIME Set
1
2
1
2
Press to select PRESENT TIME.
Press to display the PRESENT TIME
Setting screen.
Press to select Hours Adjustment /
Minutes Adjustment.
Set up TIMER
PRESENT TIME
POWER ON Function
0:52
Off
POWER ON Time
POWER OFF Function
POWER OFF Time
0:00
0:00
Off
Press to store PRESENT TIME Setup.
MULTI DISPLAY Setup
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language English (UK)
27
TIMER Set
Set up TIMER
PRESENT TIME
POWER ON Function
0:52
Off
POWER ON Time
POWER OFF Function
POWER OFF Time
0:00
0:00
Off
Press to display the POWER ON Setup
/ POWER OFF Setup screen.
Press to select
POWER ON Time / POWER OFF Time.
1
Press to select Hours Adjustment/
Minutes Adjustment.
Press to adjust each time.
2
POWER ON Setup
POWER ON Time
Hours Adjustment
0 : 52
00
Minutes Adjustment 52
POWER OFF Setup
POWER OFF Time
Hours Adjustment
0 : 00
00
Minutes Adjustment 00
Press to select On.
3
Press twice to exit from Setup.
4
R
Setup TIMER
0:52
On
0:00
0:00
On
Set up TIMER
PRESENT TIME
POWER ON Function
POWER ON Time
POWER OFF Function
POWER OFF Time
Press to complete POWER ON Time /
POWER OFF Time.
Press to select POWER ON Function/
POWER OFF Function.
Note:
Timer function will not work unless “PRESENT TIME” is set.
28
Screensaver (For preventing after-images)
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
2
3
1
4
Press to display the Setup menu screen.
SET UP
Press to select the Screensaver.
Press to select the Screensaver screen.
Press to select the Function.
Press to select the desired function.
Press to select the Mode.
Press to select each mode items.
Mode selection
Reversal / Scroll selection
White bar scroll : The white bar will scroll from left to right.
Image Reversal : Negative image will be displayed on the screen.
MULTI DISPLAY Setup
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language English (UK)
Screensaver
Function
Mode
White bar scroll
Time Designation
Start Time
0:00
0:00
SP Adjustment
Mid
Finish Time
Screensaver
Function
Mode
White bar scroll
Interval
Periodic Time
0:00
0:00
SP Adjustment
High
Operating Time
Screensaver
Function
Mode
White bar scroll
Time Designation
Start Time
0:00
0:00
SP Adjustment
Mid
Finish Time
Time Designation : Operates when Start Time inish Time and F are setup and those
times arrive.
After selecting Time Designation or Interval, the relevant Time Setup will become available for selection and the
Operating Time may be set. (Time cannot be set when Mode is on or off. )“ ” “ ” “ ”
Interval : Operates when Periodic Time and Operating Time are setup and those
times arrive.
Screensaver
Function
Mode
White bar scroll
Interval
Periodic Time
0:00
0:00
SP Adjustment
High
Operating Time
Off
White bar scroll Image Reversal
On : Operates when the (ACTION) is pressed.
If the Mode is at On, the menu screen will disappear and the
Screensaver will be activated.
To stop the Screensaver under On, press the
R
button.
Screensaver
Function
Mode
White bar scroll
off
Start Time
0:00
0:00
SP Adjustment
High
Finish Time
29
Off Low Mid High
R
Screensaver
Function
Mode
White bar scroll
Time Designation
Start Time
0:00
0:00
SP Adjustment
Mid
Finish Time
Setup of Screensaver Time
5
Screensaver (For preventing after-images )
Press to select Start Time/ Finish
Time (When Time Designation is
selected).
Press to select Periodic Time/
Operating Time (When Interval is
selected).
Press to select each Time
Adjustment screen.
Screensaver
Function
Mode
White bar scroll
Time Designation
Start Time
0:00
0:00
SP Adjustment
Mid
Finish Time
Screensaver
Function
Mode
White bar scroll
Interval
Periodic Time
0:00
0:00
SP Adjustment
High
Operating Time
Start Time
Start Ttime 0 : 00
00
00
Hours Adjustment
Minutes Adjustment
Finish Time
Finish Time
Hours Adjustment
0 : 00
00
Minutes Adjustment 00
Press to select Hours Adjustment/
Minutes Adjustment.
Press to Setup Hours or Minutes.
Periodic Time
Periodic Time 0:00
00
00
Minutes Adjustment
Hours Adjustment
Operating Time
Operating Time 0 : 00
00
00
Hours Adjustment
Minutes Adjustment
button: Forward
button: Back
Press to store settings.
Side Panel Adjustment
2Press to select the SP Adjustment.
Press to select Off, Low, Mid, High.
Press to exit from Screensaver.
3
1
Do not display a picture in 4:3 mode for an extended period,
as this can cause an after-image to remain on the side
panels either side of the display field.
To prevent the appearance of such an after-image,
illuminate the side panels.
To display the Screensaver screen.
(Refer to the previous page, operation
guide steps 1 and 2)
6
Note: Timer function will not work unless is set.“PRESENT TIME”
Notes:
Setting the side panel to High mode for an extended period may result in occurrence of after-images.•
• The side panels may flash (alternate black/white) depending on the picture being shown on the screen. In such an
occurrence, use the Cinema mode.
side panel
4:3
Screen Display
after-images
30
Setup for MULTI DISPLAY
By lining up Plasma Displays in groups of 4 or 9 as illustrated below, an
enlarged picture may be displayed across all screens.
For this mode of operation, each plasma display has to be set
up with a Display number to determine its location.
Press to display the Setup menu screen.
Press to display the
“MULTI DISPLAY
Setup” menu.
Press to select the
MULTI DISPLAY
Setup.
1
2
3Press to select the
MULTI DISPLAY Setup.
Press to select
“ ” “ ”On or Off .
How to Setup MULTI DISPLAY
INPUT
SURROUND
VOL
N
PICTURE SOUND SET UP
R
SET UP
MULTI DISPLAY Setup
MULTI DISPLAY Setup
Ratio
On
2 2
Location A1
MULTI DISPLAY Setup
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language English (UK)
group of 4 (2 2) group of 9 (3× ×3)
31
MULTI DISPLAY Setup
MULTI DISPLAY Setup
Ratio
On
2 2
Location A1
Press to select Ratio (2nd step).
Press to select “ ” “ ”2 2×, 3 3×.
How to set the display location number for each Plasma Display
Press to select Location.
Press to select the required arrangement
number. (A1-C3 : Refer to the following)
4
5
MULTI DISPLAY Setup
MULTI DISPLAY Setup
Ratio
On
2 2
Location A1
A1 A2
B1 B2
A1 A2 A3
B1 B2 B3
C1 C2 C3
Display Number locations for each arrangement
Setup for MULTI DISPLAY
6
R
Press twice to exit from Setup.
Notes:
(1) For PC or RGB input signals, normal multi-display magnification is only available at the VGA resolution.
(2) The multi-display capability is not functional for component signals.
(3) The MultiDisplay (multisk rmdisplay) function does not display certain input signals from the terminals of theæ
installed option boards listed below:
• Component input signals from the scart and RCA terminals of scart terminal board (TY-37TM5TB or TY-42TM5TB)
32
Setup for Input Signals
Component/RGB-in Select
Select the input signals to be connected by installing the Optional Terminal Board.
(Refer to the service manual for the optional Terminal Board.)
Select to match the signals from the source connected to the Component/RGB input terminals.
Y, PB, P signalsR “ ”Component
R, G, B, HD, VD signals “ ”RGB
INPUT
SURROUND
VOL
N R
PICTURE SOUND SET UP
ASPECT
PICTURE
POS. /SIZE
SET UP
1
2
Press to display the Setup menu screen.
Press to select the “Component/RGB-in
Select”.
Press to select the desired mode.
Press to exit from adjust mode.
3D Y/C Filter – For NTSC AV images
Select Signal from the Setup menu during AV(S Video) input signal“ ” “ ”
mode. ( Signal [AV] menu is displayed.)“ ”
3D Y/C Filter (NTSC)
Colour system
3: 2 Pulldown
On
Auto
Off
Panasonic Auto (4:3 )4 : 3
Signal [ AV ]
Press to select the 3D Y/C Filter (NTSC)“ ”
Press to set On/Off.
R
Press to exit from adjust mode.
Press (ACTION) button
MULTI DISPLAY Setup
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language English (UK)
MULTI DISPLAY Setup
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language English (UK)
Component RGB
R
Notes:
(1) When On, this setting only affects NTSC input signals.
(2) 3D Y/C Filter does not operate by input signal from Scart Terminal.
With the optional Scart/Component Terminal Board installed, 3D Y/C Filter does not operate by input signal from
Scart Terminal of the board.
Produkt Specifikationer
Mærke: | Panasonic |
Kategori: | TV |
Model: | TH-37PW5HZ |
Har du brug for hjælp?
Hvis du har brug for hjælp til Panasonic TH-37PW5HZ stil et spørgsmål nedenfor, og andre brugere vil svare dig
TV Panasonic Manualer
6 Januar 2025
6 Januar 2025
5 Januar 2025
5 Januar 2025
4 Januar 2025
3 Januar 2025
21 December 2024
9 December 2024
9 December 2024
25 November 2024
TV Manualer
- TV Acer
- TV Denver
- TV Sencor
- TV TCL
- TV Sony
- TV Samsung
- TV VOX
- TV Philips
- TV Lenco
- TV OK
- TV LG
- TV AEG
- TV Electrolux
- TV Pioneer
- TV Mitsubishi
- TV Sharp
- TV Daewoo
- TV Arçelik
- TV AOC
- TV Sanyo
- TV Grundig
- TV Nikkei
- TV Toshiba
- TV Pyle
- TV Furrion
- TV InFocus
- TV Lenovo
- TV Infiniton
- TV Matsui
- TV Logik
- TV Optoma
- TV Westinghouse
- TV Muse
- TV Element
- TV Thomson
- TV Hyundai
- TV Aiwa
- TV Nokia
- TV Casio
- TV AKAI
- TV Hisense
- TV Strong
- TV Brandt
- TV Hannspree
- TV Trevi
- TV Blaupunkt
- TV JVC
- TV BEKO
- TV Sandstrøm
- TV Uniden
- TV Clatronic
- TV Hitachi
- TV Medion
- TV Citizen
- TV Megasat
- TV Haier
- TV TechniSat
- TV United
- TV Bang And Olufsen
- TV Vivax
- TV Loewe
- TV Sunny
- TV Arena
- TV Finlux
- TV Prosonic
- TV Telefunken
- TV Kernau
- TV BenQ
- TV Jensen
- TV Xiaomi
- TV Zenith
- TV Peerless-AV
- TV Krüger&Matz
- TV Viewsonic
- TV Dell
- TV Schneider
- TV Tesla
- TV Polaroid
- TV NEC
- TV Soundmaster
- TV Yasin
- TV Energy Sistem
- TV Bush
- TV Dual
- TV Aspes
- TV Salora
- TV Sagem
- TV Nevir
- TV Techwood
- TV Vivo
- TV Marantz
- TV Oceanic
- TV SVAN
- TV Sogo
- TV Alba
- TV RCA
- TV Currys Essentials
- TV ECG
- TV Harper
- TV Onn
- TV Orion
- TV ITT
- TV Cecotec
- TV TV Star
- TV VIZIO
- TV XD Enjoy
- TV Technika
- TV Seiki
- TV TechLine
- TV Bauhn
- TV V7
- TV Voxicon
- TV Vestel
- TV Continental Edison
- TV RevolutionHD
- TV CHiQ
- TV GoGen
- TV Kogan
- TV Graetz
- TV Insignia
- TV SunBriteTV
- TV JTC
- TV Orava
- TV Reflexion
- TV QBell Technology
- TV SYLVOX
- TV Dyon
- TV Schaub Lorenz
- TV Daitsu
- TV Ferguson
- TV Aconatic
- TV Alphatronics
- TV AYA
- TV Mitchell & Brown
- TV Funai
- TV Saba
- TV Proscan
- TV Nabo
- TV Coby
- TV Listo
- TV Cello
- TV Mystery
- TV Magnavox
- TV Mach Power
- TV Engel
- TV Coocaa
Nyeste TV Manualer
12 Januar 2025
12 Januar 2025
11 Januar 2025
9 Januar 2025
8 Januar 2025
8 Januar 2025
7 Januar 2025
7 Januar 2025
7 Januar 2025
6 Januar 2025