Panasonic WV-S3532LM Manual

Panasonic Overvågningskamera WV-S3532LM

Læs nedenfor 📖 manual på dansk for Panasonic WV-S3532LM (2 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Before requesting service, refer to “Troubleshooting” of Important Information in the CD-ROM
and Operating Instructions on the Panasonic support website. Then, confirm the trouble.
Preparations
Step 1 Processing the ceiling or wall
Network Camera
Installation Guide
Included Installation Instructions
Important safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
S3131
S3111
6) Clean only with dry cloth.
S3131
S3111
7)
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
8) Only use attachments/accessories specified by the manufacturer.
9) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
S3125A
10) Unplug this apparatus during lightning storms or when unused for long periods of time.
11) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
Troubleshooting
Open Source Software
• This product contains open source software licensed under GPL (GNU General Public License),
LGPL (GNU Lesser General Public License), etc.
• Customers can duplicate, distribute and modify the source code of the software under license of
GPL and/or LGPL.
• Refer to the “readme.txt” file on the provided CD-ROM for further information about open source
software licenses and the source code.
• Please note that Panasonic shall not respond to any inquiries regarding the contents of the source
code.
NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case
the user will be required to correct the interference
at his own expense.
FCC CAUTION: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to oper-
ate the equipment.
For U.S.A.
The model number and serial number of this prod-
uct may be found on the surface of the unit.
You should note the model number and serial num-
ber of this unit in the space provided and retain this
book as a permanent record of your purchase to
aid identification in the event of theft.
Model No.
Serial No.
For U.S.A.
CAN ICES-3(A)/NMB-3(A)
For Canada
WARNING:
• To prevent injury, this apparatus must be securely
attached to the wall/ceiling in accordance with the
installation instructions.
• To prevent fire or electric shock hazard, do not
expose this apparatus to rain or moisture.
S3131
S3111
• The apparatus should not be exposed to dripping
or splashing.
S3131
S3111
• All work related to the installation of this product
should be made by qualified service personnel or
system installers.
• The installation shall be carried out in accordance
with all applicable installation rules.
• The connections should comply with local electrical
code.
• Batteries (battery pack or batteries installed) shall
not be exposed to excessive heat such as sunlight,
fire or the like.
CAUTION:
• The network camera is only intended for a connec-
tion to an ethernet or PoE network without routing
to the outside plant.
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them
to applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
Note for the battery symbol (bottom symbol)
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
About the user manuals
Product documentation is composed of the following documents.
• Installation Guide (this document): Explains installation, mounting, cable connections, and adjusting the
fi eld of view.
• Important Information (included in the CD-ROM):
Provides basic information about this product such
as Precautions for installation, Parts and functions, etc..
• Operating Instructions (on the Panasonic support website): Explains how to perform the settings
and how to operate this product.
Standard accessories
Installation Guide (this document) ..............1 pc.
IMPORTANT SAFETY INSTRUCTIONS ......1 pc.
Warranty card ............................................1 pc.
CD-ROM*1 ................................................. 1 pc.
Code label*2...............................................1 pc.
*1 The CD-ROM contains the several kind of operating instructions and different kinds of tool soft-
ware programs.
*2 This label may be required for network management. Use caution not to lose this label.
The following parts are used during installation procedures.
Template ....................................................1 pc.
S3531
S3511
S3532
S3512
Bit
(Hex wrench,
screw size 6.35 mm {1/4 inches} T10)
.............1 pc.
S3531
S3511
RJ45 waterproof connector cover .............1 pc.
RJ45 waterproof connector cap ................1 pc.
S3532
S3512
Cable guard ...............................................1 pc.
Lens adjuster ..............................................1 pc.
* Lens adjuster is used only at the time of servic-
ing.
IMPORTANT:
• When replacing existing models (WV-SFV130/WV-SFV110/WV-SW155/WV-SW158) and
installing to a one-gang junction box, take care because the direction of the camera will
change 90° to the side.
S3531 S3511 S3532 S3512
• The minimum required pull-out capacity of a single screw or anchor bolt is 196 N {44 lbf} or
more.
• Select screws according to the material of the location that the camera will be mounted to.
In this case, wood screws and nails should not be used.
• If the mounting location such as plaster board is too weak to support the total weight, the
area shall be sufficiently reinforced.
Bit
: Direct current symbol
【Connecting the cable through holes opened in the ceiling or wall】
• Before attempting to connect or operate this product, please read these instructions carefully and
save this manual for future use.
• For information about the basic description of this product, refer to the Important Information on
the provided CD-ROM. For information about how to perform the settings and how to operate this
product, refer to the Operating Instructions on the following Panasonic support website.
https://security.panasonic.com/download/
• Before reading this manual, be sure to read the Important Information.
Model No. WV-S3531L, WV-S3511L
WV-S3131L, WV-S3111L
WV-S3532LM, WV-S3512LM
WV-S3531L
The following notations are used when describing the functions limited for specified models.
The functions without the notations are supported by all models.
:The functions with this notation are available when using the model WV-S3531L.
:The functions with this notation are available when using the model WV-S3511L.
:The functions with this notation are available when using the model WV-S3131L.
:The functions with this notation are available when using the model WV-S3111L.
:The functions with this notation are available when using the model WV-S3532LM.
:The functions with this notation are available when using the model WV-S3512LM.
*
XXXXX
: Outdoor model
XXXXX
: Indoor model
About notations
S3531
S3511
S3131
S3111
S3532
S3512
■
The following are methods for installing a camera to a ceiling or wall
Prepare the required parts for each installation method before starting the installation.
The following are the requirements for the various installation methods.
Installation method
Mounting screws
/ anchor bolts
When directly installing a camera to a ceiling or wall M4 / 3 pcs.
When installing to a junction box or other part.
S3531
S3511
S3532
S3512
*
When installing the junction box cover (locally procured), prepare a locally procured
metal cover according to the shape of the junction box.
M4 / 2 pcs.
Place the template (accessory) on the ceiling or wall, mark the holes for the cable to be passed
through and for the fixing screws (3 places), then open the holes.
IMPORTANT:
• Turn off each system’s power supply (PoE hub, etc.) before starting the installation.
• Perform waterproofing so that there is no exposure to water into the architecture through the
holes for the camera fixing screws or hole for wiring.
S3531 S3511 S3532 S3512
Note:
• Use the template (accessory) with the side with the arrow facing you.
• Ceiling installation:
Place the template so that the arrow is pointing to the front of the camera (the lens side).
• Wall installation:
Place the template so that the arrow is pointing down.
• No processing for the ceiling or wall is required when installing the camera to an existing junc-
tion box.
S3531 S3511 S3532 S3512
【Connecting the cable through the side cable access hole】
Place the template (accessory) on the ceiling or wall, mark the holes for the fixing screws (3 places),
then open the holes.
A
Using the bit (accessory), loosen the
enclosure fi xing screws (3 places).
B
Hold the both sides of the enclosure
and remove it.
C
Remove the packaging from the
inside of the dome cover.
A
Use a fl athead screwdriver to open the
screw cover (2 places), and then use a
Phillips screwdriver to loosen the enclo-
sure fi xing screws (2 places).
B
Hold down on both sides of the enclo-
sure and remove it.
C
Remove the packaging from the inside
of the dome cover.
IMPORTANT:
• To prevent injuries and protect the cables,
finish the side cable access portion with a file
to avoid sharp edges.
Side cable
access hole
S3531 S3511 S3532 S3512 S3131 S3111
Holes for the fixing screws (3 places)
Template (accessory)
Arrow
*12 mm {15/32 inches}
10.5 mm {13/32 inches}
*27 mm{1-1/16 inches}
30.5 mm{1-3/16 inches}
Cable access
hole
When installing the camera directly on the ceiling or
wall with cables exposed, cut out a portion of the
enclosure to open a cable access hole on the side of
the enclosure, and then pass the cables through the
side of the enclosure.
Follow the steps below to insert the microSD
memory card if necessary.
A
Insert the microSD memory card into the
microSD slot with the side with printing
facing up.
B
Insert the microSD memory card into the end
of the microSD slot and confirm that a click-
ing sound is made.
C
After confirming a clicking sound is made,
take your fingers off the microSD memory
card and ensure that its back end does not
protrude over the surface of the microSD slot
(the same surface as the microSD symbol).
*
For information about inserting and removing
microSD memory cards, refer to the Important
Information on the provided CD-ROM.
*This illustration represents WV-S3131L
Note:
•
After the installation is completed, do not remove the cover film from the dome cover until
attaching the enclosure.
•
Because the cable part and the slot for the waterproof rubber are engaged, it may be difficult to
take off the enclosure.
S3531 S3511 S3532 S3512
WV-S3131L
This device complies with Part15 of the FCC Rules.
Operation is subject to the following two conditions :
(1)This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Supplier’s Declaration of conformity
Trade name : Panasonic
Model No. :
WV-S3531L, WV-S3511L
WV-S3131L, WV-S3111L
WV-S3532LM, WV-S3512LM
Responsible Party :
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, New Jersey
07102-5490
Support Contact : 1-800-528-6747
Other items that are needed (not included)
Processing of side cable access hole
S3131
S3111
Inserting a microSD memory card
Removing the enclosure
Enclosure fixing screws (2 places)
Enclosure fixing
screws (3 places)
Bit (accessory)
Waterproof
rubber
Enclosure
Slot of the waterproof
rubber
Screw
cover
Screw
cover
Dome cover
Step1
Processing the ceiling
or wall
Step2
Making connections
⇨
• Remove the camera using the reverse order of the installation procedures.
The installation tasks are explained using 6 steps.
Installation
Step3
Mount the camera
⇨ ⇨ Step4
Confi gure the network
settings
Step5
Adjustment
⇨Step6
Attach the enclosure
⇨
Step 2 Making connections
S3131
S3111
RJ45 Network terminal
Ethernet cable (locally procured)
(category 5e or better, straight)
Connect an Ethernet cable to RJ45 network terminal.
IMPORTANT:
• The maximum cable length is 100 m {328 feet}.
*
ø
96 mm {3-25/32 inches}
ø
88.6 mm {3-1/2 inches}
*23°
24°
*36°
37.5°
*36°
39.5°
*22 mm{7/8 inches}
17 mm{21/32 inches}
*22 mm {7/8 inches}
17 mm{21/32 inches}
*Upper level：
S3531
S3511
S3532
S3512
Holes not explained in the
illustration are not used.
Lower level：
S3131
S3111
Symbol of
the microSD
microSD memory card (the
side with printing facing up)
microSD slot
Back end of the microSD memory card
For U.S. and Canada:
Panasonic i-PRO Sensing Solutions
Corporation of America
800 Gessner Rd, Suite 700 Houston, TX 77024
https://www.security.us.panasonic.com/
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada
1-877-495-0580
https://www.panasonic.com/ca/
© Panasonic i-PRO Sensing Solutions Co., Ltd. 2019  
avs1218-2109 PGQX2273XA Printed in China
For Europe and other countries:
Panasonic Corporation
http://www.panasonic.com
Panasonic i-PRO Sensing Solutions Co., Ltd.
Fukuoka, Japan
Authorised Representative in EU:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany

Produkt Specifikationer

Mærke: Panasonic
Kategori: Overvågningskamera
Model: WV-S3532LM

Har du brug for hjælp?

Hvis du har brug for hjælp til Panasonic WV-S3532LM stil et spørgsmål nedenfor, og andre brugere vil svare dig


Overvågningskamera Panasonic Manualer

Panasonic

Panasonic WV-SFN480 Manual

2 Oktober 2024
Panasonic

Panasonic WV-CP630/G Manual

8 September 2024
Panasonic

Panasonic AW-HE20KE Manual

1 September 2024
Panasonic

Panasonic AW-UE100K Manual

27 August 2024
Panasonic

Panasonic AW-UR100 Manual

20 August 2024
Panasonic

Panasonic WV-SF438E Manual

1 August 2024
Panasonic

Panasonic AW-HN40H Manual

30 Juli 2024
Panasonic

Panasonic AW-UE150WE Manual

25 Juli 2024
Panasonic

Panasonic KX-HN6000 Manual

20 Juli 2024
Panasonic

Panasonic WV-SPW532L Manual

19 Juli 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Bosch

Bosch MIC IP FUSION 9000i Manual

20 Februar 2025
Moen

Moen Flo 900-006 Manual

19 Februar 2025
Moen

Moen Flo 900-001 Manual

19 Februar 2025
IDIS

IDIS DC-D4517RXP Manual

18 Februar 2025
IDIS

IDIS DC-D4531WERX Manual

18 Februar 2025
IDIS

IDIS DC-Y6516X Manual

18 Februar 2025
IDIS

IDIS DC-D4217RX Manual

18 Februar 2025
IDIS

IDIS DC-D4216WRX-A Manual

18 Februar 2025
IDIS

IDIS DC-D4537RXA Manual

18 Februar 2025
IDIS

IDIS DC-D4236WRX-A Manual

17 Februar 2025