Paradigm BD1 Manual

Paradigm Ikke kategoriseret BD1

Læs nedenfor 📖 manual på dansk for Paradigm BD1 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
BD 1’s LED WHAT IS IT TELLING YOU?
LED flashes red and blue alternately BD 1 is in pairing mode
Blue LED flashes once every 2 seconds BD 1 is in standby mode and not connected
Blue LED flashes twice every 5 seconds BD 1 is synched with the Bluetooth-
enabled device
Red LED flashes once every 20 seconds BD 1 is at low power
and BD 1 emits audible tones
• BD 1 Bluetooth Receiver
• AC adaptor and cable
• Built-in 250mAH Li-polymer rechargeable battery
Power ON: Press and hold the power button for 3 to 5 seconds
Power OFF: Press and hold power the power button for 3 to 5 seconds
The Paradigm SHIFT BD 1 is a universal Bluetooth receiver that lets you stream music from any
Bluetooth-enabled device supporting an Advanced Audio Distribution Profile (A2DP) or Audio/Video
Remote Control Profile (AVRCP). This includes the iPhone, Android and Blackberry phones and other
Bluetooth-enabled devices such as laptops and tablet PCs.
Customers outside of North America
For our international customers the unit comes with a USB cable that plugs into a USB AC power
converter (not included).
NOTE: The international version of this unit is designated BD 1E, however for information
purposes in this manual it will be referred to as BD 1.
See "GETTING STARTED" section.
(North American customers)
1. Plug the power supply into an AC outlet like the one on the back of the A2 speaker (see
diagram). Plug the other end into the jack marked ‘input’ on the BD 1 receiver
2. The BD 1’s red LED will come on, this tells you the unit is charging. A full charge takes
approximately 2.5 hours. When the unit is charged, the red LED will go out.
3. The BD 1 can operate from the AC power and can remain plugged in. If desired, unplug and
remove the AC power supply and operate the BD 1 off battery power.
4. Plug the BD 1’s 3.5-mm cable into the 3.5-mm jack on your device (see diagram of the A2’s
stereo input below as an example).
(Customers outside of North America only)
1. Connect the supplied USB cable into a USB AC power converter (sold separately)
2. Plug the power supply into a power outlet. Plug the other end into the jack marked ‘input’ on the
BD 1E receiver.
3. The BD 1E’s red LED will come on, this tells you the unit is charging. A full charge takes
approximately 2.5 hours. When the unit is charged, the red LED will go out.
4. The BD 1E can operate from the AC power and can remain plugged in. If desired, unplug and
remove the AC power supply and operate the BD 1E off battery power.
5. Plug the BD 1E’s 3.5mm cable into the 3.5mm jack on your device (see diagram of the A2’s
stereo input below as an example).
(All customers)
1. Turn off the BD 1
2. Place your Bluetooth-enabled mobile phone about 1 meter (approximately 3 feet) away from the BD 1
(once synching is complete maximum distance to maintain connection is approximately 10m/30ft)
3. Press and hold down the BD 1’s power button for about 6 seconds until its LED alternates between
Red and Blue
4. Activate your mobile phone’s Bluetooth settings (located under ‘Phone Settings’ or ‘Settings’ ) and let
the phone search for Bluetooth devices within range. Once it has found all devices select “SHIFT BD 1”
from the list
5. If prompted for a password or PIN Number enter: “0000”
6. If prompted by your phone to connect, select: “Yes” or “Connect”
7. Once a connection has been established the BD 1’s Blue LED will flash twice every five seconds.
NOTE: The LED will continue to flash until the BD 1 and the connected device are no longer connected
or out of synch distance from each other
• If no devices are sensed, the BD 1 will automatically turn off within five minutes
• After successful synching, the BD 1 and smart phone will remember each other and you will not have
to resynch again. If for some reason you do have to resynch, simply follow Steps 1 through 7 above.
• Each time the BD 1 is turned on it will automatically try to connect to the last device to which it was
connected. If you want to synch it with a new Bluetooth device, go to ‘Settings’ or ‘Phone Settings’ on
your phone and turn off the Bluetooth function of the last connected device and synch with the new
device following Steps 1 through 7 above.
• If the BD 1 is turned on but will not synch to the new device, press the power button twice and
synching should occur. If not, refer to the "Troubleshooting" section
• When the receiver and the Bluetooth-enabled device are out of range of each other they will be
automatically disconnected. They will automatically reconnect once they are again within range.
In order for you to get the best from your BD 1, read the following recommendations:
• Do not expose the receiver to liquid, moisture or humidity as this will damage the product’s internal circuit
and such damage is not covered under warranty
• Clean only with soft cloth. Do not use household cleaners or solvents of any kind.
• Do not expose the receiver to extremely high or low temperature as this will shorten the battery life.
• Do not dispose of the BD 1 in an incinerator or fire as this will result in a dangerous explosion.
Recycle the product according to the recycling directions at the beginning of this manual and
according to your local laws and bylaws
• If the BD 1 will not be used for an extended period of time place it in a clean, dry place free from
high temperatures, humidity, moisture and dust
The BD 1 won’t turn on
• Make sure the battery is charged or that the unit is connected to the AC adapter and plugged into
an un-switched, powered AC outlet. If the unit will not turn on with the AC adapter connected and
powered, unplug the unit from wall socket for a few seconds then reconnect the AC power to reset
the unit’s internal circuitry.
The BD 1 won’t turn off
• Make sure the battery is charged or the unit is connected to the AC adapter and plugged into an
un-switched, powered AC outlet. If the unit will not turn on with the AC adapter connected and
powered, unplug the unit from wall socket for a few seconds, then reconnect the AC power to
reset the unit’s internal circuitry.
The BD 1 won’t connect to the device
• Make sure the Bluetooth-enabled device is no more than 1 meter (3 feet) away from the BD 1 when
performing the synching operation.
• Recheck to ensure the device is:
a) Bluetooth-enabled and
b) Supports Advanced Audio Distribution Profile (A2DP) or Audio/Video Remote Control Profile (AVRCP)
• Make sure your phone’s Bluetooth settings are enabled and that “SHIFT BD 1” is selected
• Repeat steps 1 through 7 listed at the top of this page.
NOTE: If synching still fails after all of the above troubleshooting attempts have been tried please refer
to the Owners Manual for your Bluetooth-enabled device for additional information and/or solutions.
Bluetooth Version Bluetooth v2.1
Bluetooth Profiles Supported A2DP and AVRCP
Frequency Range 2.402 GHz – 2.480 GHz
Operating Distance 10 meters (approximately 30 feet), Class II
Synching Distance 1meter (approximately 3 feet), Class II
Charging Input Voltage/Current DC 5V 300mA
Standby Time 230 hours
Battery Life Up to 12 hours
Dimensions 45 mm x 33 mm x 8 mm
Weight 14 g
Paradigm warrants this product against defects in materials and workmanship under normal use and
operation for a period of one (1) year from the date of purchase by the original end-user/purchaser.
Maintain your original sales receipt for proof of purchase. For complete warranty information visit our
website at www.paradigm.com/shift.
(All customers)
If using the BD 1 with a laptop PC or tablet, refer to your device’s Operating Manual for how to
enable Bluetooth, then follow steps 1 through 7 above.
Music should pause automatically when you dial a phone number or receive an incoming call.
NOTE: This feature may not work on all Bluetooth-enabled phones. Check your device’s Operating Manual.
WARNING/ADV ERTISSMENT
RISK OF ELEC TRIC SHOC K. DO NOT OPEN.
RISQ E DE CHOC ELECTR IQUE. NE PAS OUVRIR.
WARNING/ADVE RTISSMENT
RIS OF ELECTRIC S HOCK . DO NOT OP EN.
RIS QUE E CHOC ELECTRI QUE. NE PA S OUVRIR.
WARN
RISK OF E LE
RISQ UE DE CH O C
WARN
RISK OF E LE
RISQ UE DE CH O C

Produkt Specifikationer

Mærke: Paradigm
Kategori: Ikke kategoriseret
Model: BD1

Har du brug for hjælp?

Hvis du har brug for hjælp til Paradigm BD1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Paradigm Manualer

Paradigm

Paradigm Decor 2S v2 Manual

1 September 2024
Paradigm

Paradigm Decor 1S v2 Manual

1 September 2024
Paradigm

Paradigm SE Center Manual

28 August 2024
Paradigm

Paradigm CI Home H65-SM Manual

28 August 2024
Paradigm

Paradigm Stylus 470 Manual

28 August 2024
Paradigm

Paradigm Founder 70LCR Manual

28 August 2024
Paradigm

Paradigm CI Pro P80-A v2 Manual

28 August 2024
Paradigm

Paradigm CI Elite E7 LCR v2 Manual

28 August 2024
Paradigm

Paradigm Millenia 20 Trio Manual

28 August 2024
Paradigm

Paradigm CS-60R v2 Manual

28 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Atlona

Atlona AT-DVIF30S-IR Manual

29 December 2024
Atlona

Atlona AT-PRO3HD66M Manual

29 December 2024
Atlona

Atlona AT-3GSDI500 Manual

29 December 2024
BlueBuilt

BlueBuilt BBMAG2M Manual

29 December 2024
Atlona

Atlona AT-3GSDI-14 Manual

28 December 2024
Atlona

Atlona AT-COMP10SS Manual

28 December 2024
Atlona

Atlona AT-2VGA300SL Manual

28 December 2024
Atlona

Atlona AT-HD-V216 Manual

28 December 2024
Atlona

Atlona AT-VGA11S Manual

28 December 2024
True

True TC900 Manual

28 December 2024