Paradigm BX-82SQ Manual


Læs nedenfor 📖 manual på dansk for Paradigm BX-82SQ (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
10.05.10 MAN1001012
INSTALLATION DE L’ENCEINTE
a) En tenant la bordure avant de l’enceinte avec les pouces et index, pousser
les 4 vis de montage les unes vers les autres avec les autres doigts, de
manière à ce que les supports de fixation s’insèrent dans le trou par un
mouvement vers le haut et l’intérieur. Relâcher les vis et appuyer doucement
sur l’enceinte pour l’insérer dans le boîtier arrière.
Faire passer le fil dans la boucle pour filage puis le long du plafond jusqu’à
l’emplacement de l’amplificateur avant d’apposer la cloison sèche.
REMARQUE
:Retirer la grille avant de peindre.
INSTALLATION DE
LA CLOISON SÈCHE
INSTALLATION DE LA GRILLE
ÉTAPE 6 ÉTAPE 7
ÉTAPE 5
INSTALLATION FOR BX-82SQ BACKBOX AND SuBwOOFER
STEP 3
PARADIGM DOES NOT SUPPLY SCREWS FOR MOUNTING BACKBOX
AND SUBWOOFER TO WALL. CHOOSE SCREWS APPROPRIATE FOR
WALL COMPOSITION AND WEIGHT OF BACKBOX WITH SUBWOOFER.
BX-82SQ BACKBOX: 17.6 lb / 8 kg
PCS-82SQ SUBWOOFER: 8.8 lb / 4 kg
TOTAL WEIGHT: 26.4 lb / 12 kg
IF YOU ARE NOT COMFORTABLE PERFORMING THE FOLLOWING PROCEDURE,
CONTACT A PROFESSIONAL INSTALLER.
IMPORTANT NOTE: The required amount of damping material is included and correctly positioned in backbox. DO NOT remove, compact or add additional
damping material. DO NOT add damping material to wall directly behindbackbox.
STEP 2STEP 1
PARTS INCLUDED:
• 1 – Backbox
• 2 – Pre-Construction Brackets • 1 Wire Loop with Screw
NOTE: DO NOT PUNCTURE OR REMOVE PROTECTIVE PLASTIC OVER
CUTOUT UNTIL READY TO INSTALL SUBWOOFER.
REQUIRED, NOT INCLUDED:
• 16 – #8 Wood Screws
(8 to attach brackets to box; 8 to attach box to wall)
To prevent vibrations and resonances
from coloring output, center the box
between joists—backbox must not
touch joists.
INSTALLING BACKBOX
14 in /35.6 cm
3-3/8 in
8.6 cm
48 in / 121.9 cm
CAUTION: Mounting brackets are
made of galvanized steel. Edges
may be sharp.
INSTALLING BRACKETS
8-1/8 po / 20,6 cm
15-5/8 po / 39,6 cm
BACKBOX DIMENSIONS
NOTE: Wire loop must be attached
with screw provided.
ROUGE (+)
NOIR (–)
RACCORDEMENT
ÉTAPE 4
180˚
IMPORTANT! Backbox has been inverted.
DO NOT install in this position, see proper
position in Step 2. Terminal cup
sits here.


Produkt Specifikationer

Mærke: Paradigm
Kategori: Ikke kategoriseret
Model: BX-82SQ

Har du brug for hjælp?

Hvis du har brug for hjælp til Paradigm BX-82SQ stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Paradigm Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Atlona

Atlona AT-DVIF30S-IR Manual

29 December 2024
Atlona

Atlona AT-PRO3HD66M Manual

29 December 2024
Atlona

Atlona AT-3GSDI500 Manual

29 December 2024
BlueBuilt

BlueBuilt BBMAG2M Manual

29 December 2024
Atlona

Atlona AT-3GSDI-14 Manual

28 December 2024
Atlona

Atlona AT-COMP10SS Manual

28 December 2024
Atlona

Atlona AT-2VGA300SL Manual

28 December 2024
Atlona

Atlona AT-HD-V216 Manual

28 December 2024
Atlona

Atlona AT-VGA11S Manual

28 December 2024
True

True TC900 Manual

28 December 2024