PCE Instruments PCE-PH 15 Manual


Læs nedenfor 📖 manual på dansk for PCE Instruments PCE-PH 15 (1 sider) i kategorien Måling. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
PH METER
PCE-PH 15 / 16 / 17 / 18
Specifications
Measure Range: 0.00-14.00PH
Accuracy: 0.1PH(at 20 ), 0.2PH
Resolution:0.01PH Operating Temperature: 0 50
Calibration: Manual, at one point through trimmer
Power Supply: 3 1.5V(AG-13 battery)
Dimensions:175mm 51mm 25mm. Weight: 57g
Operation
1.Remove the protective cap.
2.First rinse the electrode with distilled water, and suck it with filter-paper.
3.Turn the meter on by pressing the ON key.
4.Immerse the ph meter electrode in the solution to be tested.
5.Stir gently and wait for the reading to stabilize.
6.Press the "HOLD" key, the reading is be kept. When repeat measuring, please
press the "HOLD" key again, it automatically relieves the hold condition.
7.After use, rinse the electrode with water to minimize contamination. Turn the meter
off by pressing the OFF key.
8.Always replace the protective cap after use.
PH Calibration
1.Immerse the electrode in pH 6.86(pH7.00) buffer solution of phosphate, and gently shake it.
2.Allow the reading to stabilize and with a small screwdriver turn the calibration trimmer
until the display shows "6.86"("7.00"). Rinse the electrode with distilled water, and suck it
with filter-paper.
3.Immerse the electrode in pH4.01 or pH9.18(pH10.0) the buffer solution of borax.
4.After about one minute, until the display shows "4.01"or "9.18"("10.0").
Important:
The instrument's pH range must be re-calibrated whenever:
The electrode has been used(laid) for long time from the last calibration.
The electrode has been used in particularly taxing conditions.
The utmost accuracy is required.
Battery Install
If the meter can not be switched on or the display fades, To change batteries, takes down
the meter back battery case and replaces batteries. Pay attention to the polarity of battery.
Warranty
These instruments are warranted from all defects in material and manufacturing for
a period of one year from the date of purchase.
If during this period, the repair or the replacement of parts is required where the
damage is not due to negligence or erroneous operation by user, please return the
parts to either dealer or our offices, and the repair will be effected free of charge.


Produkt Specifikationer

Mærke: PCE Instruments
Kategori: Måling
Model: PCE-PH 15

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE Instruments PCE-PH 15 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Måling PCE Instruments Manualer

Måling Manualer

Nyeste Måling Manualer

Steinberg

Steinberg SBS-DL-123 Manual

16 December 2024
Steinberg

Steinberg SBS-DL-125E Manual

16 December 2024
Helvi

Helvi T1 Manual

15 December 2024
Steinberg

Steinberg SBS-DL-123L Manual

15 December 2024
Testo

Testo 160 THL Manual

15 December 2024
DriveTest

DriveTest BIA-1 BT Manual

14 December 2024
PQ Plus

PQ Plus UMD 705 Manual

14 December 2024
Testo

Testo 318 Manual

14 December 2024
Crowcon

Crowcon Gasman-O2 Manual

13 December 2024