Philips S1110 Manual


Læs nedenfor 📖 manual på dansk for Philips S1110 (147 sider) i kategorien Barbermaskiner. Denne guide var nyttig for 44 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/147
S1110, S1100
Electromagnetic fields (EMF)
-This Philips appliance complies with all
applicable standards and regulations regarding
exposure to electromagnetic fields.
General
-The appliance is suitable for mains voltages
ranging from 100 to 240 volts.
Using the appliance
Note: You can only use the appliance when it is
connected to the wall socket.
Shaving tips & tricks
-Make circular movements during use. Circular
movements provide better shaving results than
straight movements.
-Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
Switching the appliance on and off
1 To switch on the appliance, press the on/off
button once.
2 To switch off the appliance, press the on/off
button once.
Shaving
1
2
1 Put the small plug in the appliance.
2 Put the adapter in the wall socket.
3 Switch on the appliance.
9
English
4 Move the shaving heads over your skin in
circular movements.
5 After shaving, switch off the appliance.
6 Clean the appliance (see chapter 'Cleaning and
maintenance').
Trimming (S1110 only)
You can use the trimmer to groom your sideburns
and moustache.
1 Put the small plug in the appliance.
2 Put the adapter in the wall socket.
3 Push the trimmer slide downwards to open the
trimmer.
4 Switch on the appliance.
-You can now start trimming.
5 After trimming, switch off the appliance.
6 Clean the trimmer (see chapter ‘Cleaning and
maintenance’).
7 Close the trimmer (‘click’).
Cleaning and maintenance
Danger: This appliance is not washable.
Never immerse the appliance in water,
nor rinse it under the tap.
10 English
Thorough cleaning
Clean the shaving heads thoroughly once a month
for optimal performance.
1 Switch off the appliance and make sure it is
disconnected from the wall socket.
2 Press the release button to open the shaving
unit. Pull the shaving unit off the appliance.
2
1
3 Turn the lock anticlockwise and remove the
retaining frame.
4 Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a
guard.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and
guards, it may take several weeks before
optimal shaving performance is restored.
-Remove the cutter from the shaving guard
and clean it with the brush.
-Clean the inside and outside of the shaving
guard with the brush.
12 English
2 Push the trimmer slide downwards to open the
trimmer.
3 Clean the trimmer with the cleaning brush.
Brush up and down along the trimmer teeth.
4 Close the trimmer (‘click’).
Tip: For optimal trimming performance, lubricate
the trimmer teeth with a drop of sewing machine
oil every six months.
Storage
Put the protection cap on the appliance to prevent
damage.
Replacement
2yrs
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
Replace damaged shaving heads immediately.
Always replace the shaving heads with original
Philips shaving heads (see 'Ordering accessories').
1 Switch off the appliance and make sure it is
disconnected from the wall socket.
14 English


Produkt Specifikationer

Mærke: Philips
Kategori: Barbermaskiner
Model: S1110

Har du brug for hjælp?

Hvis du har brug for hjælp til Philips S1110 stil et spørgsmål nedenfor, og andre brugere vil svare dig