Phoenix SS1164F Manual
Læs nedenfor 📖 manual på dansk for Phoenix SS1164F (3 sider) i kategorien Kluis. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/3
Ph Sf Cpny r eac n s gurte
FIRST OPENING ON FACTORY DEFAULT CODE
Factory code is 1 2 3 4 5 6
1. Touch the screen, to activate (1 bleep and screen illuminates).
2. Enter the user code (1st time usage 123456).
3. Touch , a melodic tone will sound and the display will OPEN
show .OPEnd
4. Turn handle counter clockwise and open the door while the
tone is sounding.
CAUTION
I. If an incorrect code is entered, Error will appear in the display
panel and a short warning tone will sound.
II. If a wrong code is entered 5 times the lock will cease to oper-
ate for 5 minutes. During which a warning tone will sound and
the display will indicate deLAY.
SETTING A NEW USER CODE
Set a new code with the door open and test the new code before
closing the door.
1. Touch the screen to activate
2. Touch ENTER
3. Type in the present code
4. Touch ENTER
5. Type in the new 4 – 16 digit code
6. Touch , a melodic tone will sound and the display will ENTER
show EntErd
For example:
If the present code is 1 2 3 4 5 6 and a new four digit code is
decided as 4 2 4 2 enter the following –
ENTER 1 2 3 4 5 6 ENTER 4 2 4 2 ENTER> > > >
EntErd will show in the display and a short tone will sound to
conrm the change to 4 2 4 2
INTRODUCING A FINGERPRINT
Open the door using the user code. Keep the door open while
carrying out this process.
1. Press the button on the back of door, the screen will be M
activated
2. Press on the screen3
3. Press ENTER
4. Enter the user code and press ENTER
5. Scan in the ngerprint twice
consecutively, by placing the
nger on the sensor. The screen
will show a melody will EntErd
sound.
NOTE: Check the nger print had
been set correctly following -
How to open with a ngerprint.
• A total of 128 nger prints can be
introduced into the lock.
HOW TO OPEN WITH A FINGERPRINT
1. Touch the screen to activate
2. Scan the ngerprint on the sensor, the screen will show
OPEnd and a melody will sound.
3. Turn the handle counter clockwise and open the door while the
tone is sounding.
CAUTION
I. will appear in the If an incorrect ngerprint is scanned, ErrOr
display and a short warning tone will sound.
II. If a wrong ngerprint is scanned 5 times the lock will cease to
operate for 5 minutes. During which a warning tone will sound
and the display will indicate deLAY.
V1 JUL 2018
Battery Case
Hold the upper part and turn it counter-clockwise to
disassemble (1,5V AA Alkaline 4 pcs)
Upper part Lower part
Reset Button
Upper
part
Lower
part
Securing
Hole
Memory Button
Door back or Top drawer back
Put Finger-print twice
While red lamp flickering,
put user’s finger on sensor.
1
2After Bi- sound,
repeat the above 1
SS1160F OPERATING INSTRUCTIONS
& GUARANTEE REGISTRATION
Produkt Specifikationer
| Mærke: | Phoenix |
| Kategori: | Kluis |
| Model: | SS1164F |
Har du brug for hjælp?
Hvis du har brug for hjælp til Phoenix SS1164F stil et spørgsmål nedenfor, og andre brugere vil svare dig
Kluis Phoenix Manualer
17 September 2024
21 August 2024
19 August 2024
19 August 2024
16 August 2024
16 August 2024
16 August 2024
15 August 2024
15 August 2024
15 August 2024
Kluis Manualer
- Kluis Philips
- Kluis Nedis
- Kluis Abus
- Kluis Burg Wächter
- Kluis Dometic
- Kluis Honeywell
- Kluis Topcraft
- Kluis Master Lock
- Kluis Yale
- Kluis Olympia
- Kluis Olymp
- Kluis Perel
- Kluis Fluke
- Kluis Avanti
- Kluis SereneLife
- Kluis First Alert
- Kluis Kidde
- Kluis Toolland
- Kluis Salvus
- Kluis Guzzanti
- Kluis Conrad
- Kluis Varo
- Kluis Sentry
- Kluis Filex
- Kluis Kreator
- Kluis Handson
- Kluis Nauta
- Kluis Jewel
- Kluis Rottner Tresor
- Kluis Oxloc
- Kluis Winholt
- Kluis Homak Security
- Kluis NOFIRE
- Kluis M-Locks
- Kluis Fichero
- Kluis EasySafe
Nyeste Kluis Manualer
17 September 2024
14 September 2024
14 September 2024
5 September 2024
2 September 2024
2 September 2024
2 September 2024
2 September 2024
2 September 2024
2 September 2024