Pioneer AVIC-X850BT Manual
Læs nedenfor 📖 manual på dansk for Pioneer AVIC-X850BT (204 sider) i kategorien Navigator. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/204
Operation Manual
MULTIMEDIA NAVIGATION RECEIVER
AVIC-Z150BH
AVIC-X950BH
AVIC-X850BT
AVIC-X8510BT
Notice to all users:
This software requires that the navigation system is
properly connected to your vehicle’s parking brake and
depending on your vehicle, additional installation may
be required. For more information, please contact your
Authorized Pioneer Electronics retailer or call us at
(800) 421-1404.
Be sure to read Important Information for the User
first!
Important Information for the User includes the
important information that you must understand before
using this navigation system.
English
Thank you for buying this Pioneer product.
Please read through these instructions so you will know how to operate your model
properly. After you have finished reading the instructions, keep this document in a
safe place for future reference.
Important
The screens shown in the examples may differ
from actual screens, which may be changed
without notice for performance and function
improvements.
Introduction
Manual overview 9
–How to use this manual 9
–Conventions used in this manual 9
–Terms used in this manual 9
Notice regarding video viewing 10
Notice regarding DVD-Video viewing 10
Notice regarding MP3 file usage 10
iPod compatibility 10
Map coverage 11
Protecting the LCD panel and screen 11
Notes on internal memory 11
–Before removing the vehicle
battery 11
–Data subject to erasure 11
Basic operation
Checking part names and functions 12
Protecting your product against theft 14
–Removing the detachable
faceplate 14
–Attaching the detachable faceplate 15
Adjusting the LCD panel angle 15
Inserting and ejecting a disc 15
–Inserting a disc (for AVIC-Z150BH) 15
–Ejecting a disc (for AVIC-Z150BH) 16
–Inserting a disc (for AVIC-X950BH,
AVIC-X850BT and AVIC-X8510BT) 16
–Ejecting a disc (for AVIC-X950BH, AVIC-
X850BT and AVIC-X8510BT) 16
Inserting and ejecting an SD memory
card 16
–Inserting an SD memory card (for AVIC-
Z150BH) 16
–Ejecting an SD memory card (for AVIC-
Z150BH) 17
–Inserting an SD memory card (for AVIC-
X950BH, AVIC-X850BT and AVIC-
X8510BT) 17
–Ejecting an SD memory card (for AVIC-
X950BH, AVIC-X850BT and AVIC-
X8510BT) 18
Plugging and unplugging a USB storage
device 18
–Plugging in a USB storage device 18
–Unplugging a USB storage device 18
Connecting and disconnecting an iPod 18
–Connecting your iPod 19
–Disconnecting your iPod 19
Startup and termination 19
On first-time startup 19
Regular startup 20
–A message about the map
database 20
Demonstration images 20
Temporarily clearing the screen (navigation
system in standby mode) 20
How to use the navigation menu
screens 22
Shortcut Menu 23
–Selecting the shortcut 23
–Removing a shortcut 23
Using the touch panel 24
–Using the common touch panel
keys 24
–Operating list screens (e.g. POI
list) 24
–Operating the on-screen keyboard 24
Swipe action 25
–Swipe action list 25
How to use the map
How to read the map screen 29
–Enlarged map of the intersection 30
Contents
En
2
–The display while driving on the
freeway 31
Types of the road stored in the map
database 31
Operating the map screen 31
–Scrolling the map to the position you
want to see 31
–Viewing information about a specified
location 32
Switching the view mode 33
Switching the map orientation 33
Displaying one-way street marks 34
Displaying POI on the map 34
–Displaying preinstalled POIs on the
map 34
Registering a scale 35
Searching for and selecting a location
The basic flow of creating your route 36
Searching for a location by address 37
–Searching for a city name first 37
–Finding the location by specifying the
house number 38
–Searching by selected city history 39
Setting up a route to your home 39
Searching for Points of Interest (POI) 39
–Searching for a POI directly from the
name of the facilities 40
–Searching for a nearby POI 40
–Searching for POIs around the
destination 40
–Searching for POIs around the city 41
–Deleting the icons displayed after
searching for a nearby POI 42
Selecting destination from stored
locations 42
Selecting a location you searched for
recently 42
Searching for a location by coordinates 43
After the location is decided
Setting a route to your destination 44
–Displaying multiple routes 44
Checking and modifying the current
route
Displaying the route overview 45
Checking the current itinerary 45
Modifying the route calculation
conditions 46
–Items that users can operate 46
Editing waypoints 47
–Adding a waypoint 47
–Deleting a waypoint 47
–Sorting waypoints 48
Skipping a waypoint 48
Using the demonstration guidance 48
–Finishing the demonstration
guidance 49
Canceling the route guidance 49
Editing the data on the use of navigation
function
Registering and editing locations 50
–Storing favorite locations 50
–Editing registered locations 50
–Deleting a favorite location from the
list 50
–Deleting the destination history from
the list 51
Deleting learned routes 52
Deleting track logs 52
Using traffic information
Checking all traffic information 53
Checking traffic information on the
route 54
How to read traffic information on the
map 54
Setting an alternative route to avoid traffic
congestion 54
–Checking for traffic congestion
automatically 55
En 3
Contents
Selecting the preferred RDS-TMC service
provider manually 55
Registering and connecting a Bluetooth
device
Preparing communication devices 56
Registering your Bluetooth devices 56
–Searching for nearby Bluetooth
devices 56
–Pairing from your Bluetooth
devices 58
–Deleting a registered device 59
Connecting a registered Bluetooth device
manually 59
–Setting for priority connecting 60
Using hands-free phoning
Displaying the phone menu 61
Making a phone call 61
–Direct dialing 61
–Calling a number in the phone
book 62
–Dialing from the history 63
–Redialing a call 64
–Dialing a favorite location 64
–Dialing a facility’s phone number 64
Receiving a phone call 65
–Answering an incoming call 65
Transferring the phone book 65
–Deleting registered contacts 66
–Deleting the history information 67
Changing the phone settings 67
–Editing the device name 67
–Editing the password 68
–Stopping Bluetooth wave
transmission 68
–Answering a call automatically 68
–Setting the automatic rejection
function 69
Notes for hands-free phoning 69
Basic operations of the AV source
Displaying the AV operation screen 71
–Selecting a source 71
Turning off the AV source 71
AV source plate display 72
Using the radio
Starting procedure 73
Reading the screen 73
Using the touch panel keys 73
–Storing and recalling broadcast
frequencies 74
–Storing the strongest broadcast
frequencies 74
Using advanced functions 75
–Tuning in strong frequencies 75
Operating by hardware buttons 75
HD Radio™reception
HD Radio stations 76
Starting procedure 76
Reading the screen 76
Using the touch panel keys 77
–Storing and recalling broadcast
frequencies 79
–Storing the strongest broadcast
frequencies 79
Storing song information to an iPod (iTunes
Tagging) 79
Using advanced functions 80
–Tuning in strong frequencies 80
–Switching the seek mode 80
–Switching the reception mode 80
Operating by hardware buttons 80
Playing audio CDs
Starting procedure 81
Reading the screen 81
Using the touch panel keys 82
Operating by hardware buttons 82
Playing music files on ROM
Starting procedure 83
Contents
En
4
Reading the screen 83
Using the touch panel keys 84
Operating by hardware buttons 84
Playing a DVD-Video
Starting procedure 85
Reading the screen 85
Using the touch panel keys 86
–Resuming playback (Bookmark) 87
–Searching for a specific scene and
starting playback from a specified
time 87
–Direct number search 88
–Operating the DVD menu 88
–Using the DVD menu by touch panel
keys 88
–Frame-by-frame playback 88
–Slow motion playback 89
–Changing the wide screen mode 89
Operating by hardware buttons 89
Playing a DivX video
Starting procedure 90
Reading the screen 90
Using the touch panel keys 90
–Frame-by-frame playback 91
–Slow motion playback 92
–Starting playback from a specified
time 92
–Changing the wide screen mode 92
Playing DivX®VOD content 93
Operating by hardware buttons 93
DVD-Video or DivX setup
Displaying DVD/DivX® Setup menu 94
Setting the top-priority languages 94
Setting the angle icon display 94
Setting the aspect ratio 95
Setting the parental lock 95
–Setting the code number and level 95
Setting the auto play 96
Setting the subtitle file for DivX 96
Language code chart for DVDs 97
Playing music files (from USB or SD)
Starting procedure 98
Reading the screen 98
Using the touch panel keys (Music) 99
Operating by hardware buttons 99
Playing video files (from USB or SD)
Starting procedure 100
Reading the screen 100
Using the touch panel keys (Video) 101
–Searching for a specific scene and
starting playback from a specified
time 101
Operating by hardware buttons 102
Using an iPod (iPod)
Starting procedure 103
Reading the screen 103
Using the touch panel keys 104
Changing the wide screen mode 105
Operating by hardware buttons 106
Streaming Pandora®and using Aha
Radio
Information for compatibility of connected
devices 107
Starting procedure 107
–For iPhone users 107
–For smartphone users 108
Streaming Pandora®109
–Reading the screen 109
–Using the touch panel keys 110
–Operating by hardware buttons 110
Using Aha Radio 111
–Reading the screen 111
–Using the touch panel keys 112
–Functions coupled with Aha Radio and
the navigation system 113
Using the Bluetooth audio player
Starting procedure 114
En 5
Contents
Reading the screen 114
Using the touch panel keys 115
Operating by hardware buttons 116
Using the SiriusXM tuner
Introducing SiriusXM tuner operations 117
–To subscribe to the SiriusXM Satellite
Radio service 117
Starting procedure 117
Reading the screen 117
Using the touch panel keys 118
–Storing broadcast channels 120
–Selecting a SiriusXM channel
directly 120
–Selecting a channel from the list 120
–Using the “Replay™”function 120
–Using the Tune Scan™121
Using advanced functions 121
–Setting the Tune Start™121
–Setting the parental lock 121
–Using the Content Alerts function
(such as Song Alerts, Artist Alerts and
Game Alerts) 122
Storing song information to an iPod (iTunes
Tagging) 123
Operating by hardware buttons 124
Using AV input
Reading the screen 125
Using AV1 125
Using AV2 125
Using the touch panel keys 125
Changing the wide screen mode 126
Using AppRadio Mode
Information for compatibility of connected
devices 128
Starting procedure 128
–For iPhone users 128
–For smartphone users 129
Using the keyboard 130
Using the sound mix function 130
Other functions 131
–Displaying the image of your
application (iPhone) 131
–Displaying the image of your
application (smartphone) 131
Customizing preferences
Displaying the information screen 132
Checking the connections of leads 132
Checking sensor learning status and driving
status 133
–Clearing status 134
Checking the device number 134
Checking the version information 134
Registering your home 134
Displaying the adjustment and correction
screen 135
Switching the muting/attenuation
timing 135
Switching the muting/attenuation level 136
Setting the Volume for Guidance and
Phone 136
Correcting the current location 136
Switching the road on which you are
driving 137
Displaying the screen for navigation function
settings 137
–Changing the road color 137
–Setting the scroll-Locked 2D (Normal)
View 137
–Displaying the 3D landmarks 138
–Setting the detailed city map 138
–Setting the barrier graphic for the city
map 138
–Setting the map color change between
day and night 139
–Displaying the track log 139
–Deleting the track log
automatically 139
–Setting the current street name
display 140
Contents
En
6
–Setting the criteria of route
calculation 140
–Setting the use of toll roads 140
–Setting the use of ferries 140
–Setting the route calculation by
learning route 141
–Setting the route calculation allowing
for traffic congestion 141
–Setting the route calculation allowing
for time restrictions 141
–Setting the use of freeways 141
–Setting to select your route
automatically using the auto reroute
function 142
–Displaying the distance and estimated
time 142
–Setting the auto reroute function to
avoid traffic congestion 142
–Setting the auto-zoom display 143
–Changing the setting of the navigation
interruption screen 143
–Setting the App operation screen
interruption 143
–Changing the virtual speed of the
vehicle 143
–Changing the unit between km and
miles 144
–Displaying the traffic notification
icon 144
Changing the view mode 144
Displaying the screen for system
settings 144
–Selecting the language 145
–Setting the time difference 145
–Changing the preinstalled splash
screen 145
–Changing to the splash screen stored
on the SD memory card 146
–Adjusting the response positions of the
touch panel (touch panel
calibration) 147
–Setting the illumination color 147
–Displaying the icon for setting the rear
display output 148
Displaying the screen for AV system
settings 148
–Setting video input 1 (AV1) 149
–Setting video input 2 (AV2) 149
–Changing the screen size of SD/USB
video 149
–Displaying your DivX VOD registration
code 149
–Displaying your DivX VOD
deregistration code 150
Displaying the screen for AV sound
settings 150
–Using balance adjustment 150
–Adjusting loudness 151
–Using the equalizer 151
–Adjusting source levels 153
–Using the high pass filter 153
–Using the subwoofer output 154
–Enhancing bass (Bass Booster) 154
–Using sonic center control 154
Adjusting the equalizer curve automatically
(Auto EQ) 154
–Before operating the Auto EQ
function 155
–Performing Auto EQ 155
Displaying the screen for app settings 157
–Selecting the device connection
method 157
–Setting the keyboard language with
application for iPhone 157
Setting the rear output 158
Adjusting the picture 158
Selecting the video for rear display 159
Replicating the settings 160
Using the rear view camera functions 160
–Setting for rear view camera 161
–Setting guidelines on the rear view
image 161
En 7
Contents
Other functions
Setting the anti-theft function 163
–Setting the password 163
–Entering the password 163
–Deleting the password 163
–Forgotten password 163
Restoring the navigation system to the
default or factory settings 164
–Restoring the default setting 164
–Restoring the navigation system to the
initial state 164
–Setting items to be deleted 165
Appendix
Troubleshooting 167
Messages for navigation functions 172
Messages for AV functions 173
Messages for Bluetooth functions 175
Positioning technology 176
–Positioning by GPS 176
–Positioning by dead reckoning 176
–How do GPS and dead reckoning work
together? 176
Handling large errors 177
–When positioning by GPS is
impossible 177
–Conditions likely to cause noticeable
positioning errors 178
Route setting information 180
–Route search specifications 180
Handling and care of discs 180
–Built-in drive and care 181
–Ambient conditions for playing a
disc 181
Playable discs 181
–DVD-Video and CD 181
–AVCHD recorded discs 182
–Playing DualDisc 182
–Dolby Digital 182
Detailed information for playable media 182
–Compatibility 182
–Media compatibility chart 185
Bluetooth 189
SiriusXM Radio READY Logo 189
HD Radio™Technology 189
SD and SDHC logo 189
WMA/WMV 190
DivX 190
AAC 190
Android™190
Detailed information regarding connected
iPod devices 190
–iPod and iPhone 190
–iTunes 191
Using app-based connected content 191
–Pandora®191
–Aha Radio 191
HDMI 191
MHL 192
Using the LCD screen correctly 192
–Handling the LCD screen 192
–Liquid crystal display (LCD)
screen 192
–Maintaining the LCD screen 192
–LED (light-emitting diode)
backlight 192
Display information 193
–Destination menu 193
–Phone menu 193
–Information menu 193
–Edit/Settings menu 194
–Edit menu 194
–Navi Settings menu 194
–AV Settings menu 195
–Setting according to source
menu 196
–App Settings menu 196
–System Settings menu 196
–Bluetooth Settings menu 197
Glossary 198
Specifications 201
Contents
En
8
Manual overview
Before using this product, be sure to read Im-
portant Information for the User (a separate
manual) which contains warnings, cautions,
and other important information that you
should note.
The screen examples shown in this manual
are those for AVIC-Z150BH. The screens may
vary according to the models.
How to use this manual
Finding the operation procedure for
what you want to do
When you have decided what you want to do,
you can find the page you need from the Con-
tents.
Finding the operation procedure from
a menu name
If you want to check the meaning of an item
displayed on screen, you will find the neces-
sary page from the Display information at the
end of the manual.
Glossary
Use the glossary to find the meanings of
terms.
Conventions used in this manual
Before moving on, take a few minutes to read
the following information about the conven-
tions used in this manual. Familiarity with
these conventions will help you greatly as you
learn how to use your new equipment.
!Buttons on your navigation system are de-
scribed in ALL CAPITALS,BOLD letter-
ing:
e.g.)
HOME button, MODE button.
!Menu items, screen titles, and functional
components are described in bold with
double quotation marks “”:
e.g.)
“Destination”screen or “Phone”screen
!Touch panel keys that are available on the
screen are described in bold in brackets [ ]:
e.g.)
[Destination], [AV Source].
!Extra information, alternatives and other
notes are presented in the following for-
mat:
e.g.)
pIf the home location has not been stored
yet, set the location first.
!Functions of other keys on the same screen
are indicated with #at the beginning of the
description:
e.g.)
#If you touch [OK], the entry is deleted.
!References are indicated like this:
e.g.)
=For details of the operations, refer to
How to use the navigation menu screens
on page 22.
Terms used in this manual
“Front display”and “Rear display”
In this manual, the screen that is attached to
the body of this navigation unit will be referred
to as the “Front display”. Any additional screen
that is commercially available and can be con-
nected to this navigation unit will be referred
to as the “Rear display”.
“Video image”
“Video image”in this manual indicates mov-
ing images of DVD-Video, DivX®, iPod, and any
equipment that is connected to this system
with an RCA cable, such as general-purpose
AV equipment.
En 9
Chapter
01
Introduction
Introduction
“External storage device (USB, SD)”
The SD memory card, SDHC memory card,
microSD card, microSDHC card and USB
memory device are collectively referred to as
the “external storage device (USB, SD)”. If it in-
dicates the USB memory only, it is referred to
as the “USB storage device”.
“SD memory card”
The SD memory card, SDHC memory card,
microSD card and microSDHC card are col-
lectively referred to as the “SD memory card”.
“iPod”
In this manual, iPod and iPhone will be re-
ferred to as “iPod”.
Notice regarding video
viewing
Remember that use of this system for com-
mercial or public viewing purposes may con-
stitute an infringement on the author’s rights
as protected by the Copyright Law.
Notice regarding DVD-
Video viewing
This item incorporates copy protection tech-
nology that is protected by U.S. patents and
other intellectual property rights of Rovi
Corporation. Reverse engineering and disas-
sembly are prohibited.
Notice regarding MP3 file
usage
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
this product in any commercial (i.e. revenue-
generating) real time broadcasting (terrestrial,
satellite, cable and/or any other media), broad-
casting/streaming via internet, intranets and/
or other networks or in other electronic con-
tent distribution systems, such as pay-audio or
audio-on-demand applications. An indepen-
dent license for such use is required. For de-
tails, please visit
http://www.mp3licensing.com.
iPod compatibility
This product supports only the following iPod
models and iPod software versions. Others
may not work correctly.
Made for
!iPod touch (5th generation): iOS 6.0.1
!iPod touch (4th generation): iOS 6.0.1
!iPod touch (3rd generation): iOS 5.1.1
!iPod touch (2nd generation): iOS 4.2.1
!iPod touch (1st generation): iOS 3.1.3
!iPod classic 160GB (2009): Ver. 2.0.4
!iPod classic 160GB (2008): Ver. 2.0.1
!iPod classic 80GB: Ver. 1.1.2
!iPod nano (6th generation): Ver. 1.2
!iPod nano (5th generation): Ver. 1.0.2
!iPod nano (4th generation): Ver. 1.0.4
!iPod nano (3rd generation): Ver. 1.1.3
!iPhone 5: iOS 6.0.1
!iPhone 4S: iOS 6.0.1
!iPhone 4: iOS 6.0.1
!iPhone 3GS: iOS 6.0.1
!iPhone 3G: iOS 4.2.1
!iPhone: iOS 3.1.3
pWhen you use this navigation system with
a USB interface cable for iPod (sold sepa-
rately) that is appropriate for this product,
you can control an iPod compatible with
this navigation system.
pOperation methods may vary depending on
the iPod models and the software version
of iPod.
pDepending on the software version of the
iPod, it may not be compatible with this
equipment.
En
10
Chapter
01 Introduction
For details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
Map coverage
For details about the map coverage of this na-
vigation system, refer to the information on
our website.
Protecting the LCD panel
and screen
pDo not expose the LCD screen to direct
sunlight when this product is not used.
This may result in LCD screen malfunction
due to the resulting high temperatures.
pWhen using a cellular phone, keep the an-
tenna of the cellular phone away from the
LCD screen to prevent disruption of the
video in the form of spots, colored stripes,
etc.
pTo protect the LCD screen from damage, be
sure to touch the touch panel keys only
with your finger and do so gently.
Notes on internal memory
Before removing the vehicle
battery
If the battery is disconnected or discharged,
the memory will be erased and must be repro-
grammed.
pSome data remains. Be sure to read Setting
items to be deleted first.
=For details, refer to Setting items to be
deleted on page 165.
Data subject to erasure
The information is erased by disconnecting
the yellow lead from the battery (or removing
the battery itself).
pSome data remains. Be sure to read Setting
items to be deleted first.
=For details, refer to Setting items to be
deleted on page 165.
En 11
Chapter
01
Introduction
Introduction
Checking part names and functions
This chapter gives information about the names of the parts and the main features using the buttons.
AVIC-Z150BH (with the LCD panel closed)
1 2 3 4 5 6 7
AVIC-Z150BH (with the LCD panel open)
8
9
En
12
Chapter
02 Basic operation
AVIC-X950BH,AVIC-X850BT, and AVIC-X8510BT
7 8
1
9
2
3
4
5
b
6
a
1LCD screen
2VOL (+/–) button
Press to adjust the AV (Audio and Video)
source volume.
3MODE button
!Press to switch the screen to the AV op-
eration screen or the AppRadio Mode
screen.
=For details of the operations, refer to
How to use the navigation menu
screens on page 22.
!Press to switch between the AppRadio
Mode screen and the AV operation
screen.
=For details of the operations, refer to
How to use the navigation menu
screens on page 22.
!Press and hold to display the “Picture
Adjustment”screen.
=For details, refer to Adjusting the pic-
ture on page 158.
!Press and hold to display the touch
panel calibration screen while the “Pic-
ture Adjustment”screen is displayed.
=For details, refer to Adjusting the re-
sponse positions of the touch panel
(touch panel calibration) on page 147.
4HOME button
!Press the HOME button to display the
“Top Menu”screen while the map
screen, the AV operation screen, or the
application menu screen is displayed.
!Press to switch the application operation
screen to the application menu screen.
=For details of the operations, refer to
How to use the navigation menu screens
on page 22.
5MAP button
!Press to display the current location
when the navigation screen (showing
other than the current location) is dis-
played.
When the current location is displayed,
the screen changes to the registered
map scale. When the AV source screen
is displayed, it switches to the current lo-
cation screen.
=For details, refer to Registering a scale
on page 35.
En 13
Chapter
02
Basic operation
Basic operation
!Press and hold to temporarily clear the
screen regardless of whether it is the AV
source, the current location screen or
the AppRadio Mode screen.
=For details, refer to Temporarily clear-
ing the screen (navigation system in
standby mode) on page 20.
6TRK button
!Press to perform manual seek tuning,
fast forward, reverse and track search
controls.
!Press to perform the back and menu
function of the Android device when you
use the AppRadio Mode with an
Android device.
7hbutton
8Disc-loading slot
Insert a disc to play.
=For details, refer to Inserting and ejecting
a disc on page 15.
9SD card slot
=For details, refer to Inserting and ejecting
an SD memory card on page 16.
aDetachable faceplate
bbutton
Press to remove the detachable faceplate
from the navigation system.
=For details, refer to Removing the detach-
able faceplate on page 14.
Protecting your product
against theft
pThis function is available on AVIC-X950BH,
AVIC-X850BT, and AVIC-X8510BT.
The detachable faceplate can be detached
from the navigation system to discourage
theft, as described below.
CAUTION
!Do not expose the detachable faceplate to ex-
cessive shock or disassemble it.
!Never grip the buttons tightly or use force
when removing or attaching.
!Keep the detachable faceplate out of reach of
small children to prevent them from placing it
in their mouths.
!After removing the detachable faceplate, keep
it in a safe place so it is not scratched or da-
maged.
!Do not expose the detachable faceplate to di-
rect sunlight and high temperatures.
!When removing or attaching the detachable
faceplate, do so after turning off the ignition
switch (ACC OFF).
Removing the detachable
faceplate
pThe navigation system cannot be operated
while the detachable faceplate is removed
from the navigation system.
1 Press the button.
When you release your finger, the bottom of
the detachable faceplate separates slightly
from the navigation system.
En
14
Chapter
02 Basic operation
2 Gently grip the bottom of the detach-
able faceplate and slowly pull it outward.
Detachable faceplate
Attaching the detachable faceplate
1 Slide the detachable faceplate all the
way into the navigation system.
Make sure the detachable faceplate is se-
curely connected to the mounting hooks of
the navigation system.
2 Push the lower part of the detachable
faceplate until you hear a click.
If you fail to successfully attach the detach-
able faceplate to the navigation system, try
again but be careful not to force it as the
panel could be damaged.
Adjusting the LCD panel angle
pThis function is only available on AVIC-
Z150BH.
WARNING
Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel. Be
especially cautious of children’s hands and fin-
gers.
CAUTION
Do not open or close the LCD panel by force. This
may cause a malfunction.
1 Press the hbutton.
The “Monitor Setup”screen appears.
2 Touch or to adjust the
angle.
3 Touch .
pThe adjusted angle of the LCD panel will be
memorized and the LCD panel will automa-
tically return to that angle the next time the
LCD panel is opened or closed.
Inserting and ejecting a disc
Inserting a disc (for AVIC-Z150BH)
WARNING
!Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel.
Be especially cautious of children’s hands
and fingers.
!Do not use with the LCD panel left open. If the
LCD panel is left open, it may result in injury
in the event of an accident.
CAUTION
!Do not open or close the LCD panel by force.
This may cause a malfunction.
!Do not operate this navigation system until
the LCD panel has completely opened or
closed. If this navigation system is operated
while the LCD panel is opening or closing, the
LCD panel may stop at that angle for safety.
!Do not place a glass or can on the open LCD
panel. Doing so may break this navigation sys-
tem.
!Do not insert anything other than a disc into
the disc-loading slot.
En 15
Chapter
02
Basic operation
Basic operation
1 Press the hbutton.
The “Monitor Setup”screen appears.
2 Touch [Open].
The LCD panel opens, and the disc-loading
slot appears.
3 Insert a disc into the disc-loading slot.
The disc is loaded, and the LCD panel closes.
Ejecting a disc (for AVIC-Z150BH)
1 Press the hbutton.
The “Monitor Setup”screen appears.
2 Touch [Disc Eject].
The LCD panel opens, and the disc is ejected.
3 Remove the disc, and press the hbut-
ton.
The LCD panel closes.
Inserting a disc (for AVIC-X950BH,
AVIC-X850BT and AVIC-X8510BT)
CAUTION
Do not insert anything other than a disc into the
disc-loading slot.
%Insert a disc into the disc-loading slot.
Ejecting a disc (for AVIC-X950BH,
AVIC-X850BT and AVIC-X8510BT)
%Press the hbutton.
The disc is ejected.
Inserting and ejecting an
SD memory card
CAUTION
!Ejecting an SD memory card during data
transfer can damage the SD memory card. Be
sure to eject the SD memory card by the pro-
cedure described in this manual.
!If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
!Do not insert anything other than SD memory
cards.
pThis system is not compatible with the
Multi Media Card (MMC).
pCompatibility with all SD memory cards is
not guaranteed.
pThis unit may not achieve optimum perfor-
mance with some SD memory cards.
Inserting an SD memory card
(for AVIC-Z150BH)
CAUTION
!Do not press the hbutton when an SD mem-
ory card is not fully inserted. Doing so may da-
mage the card.
!Do not press the hbutton before an SD mem-
ory card has been completely removed. Doing
so may damage the card.
1 Press and hold the hbutton.
The LCD panel opens fully.
En
16
Chapter
02 Basic operation
2 Insert an SD memory card into the SD
card slot.
Insert it with the label surface face-up and
press the card until it clicks and completely
locks.
3 Press the hbutton.
The LCD panel closes.
Ejecting an SD memory card
(for AVIC-Z150BH)
1 Press and hold the hbutton.
The LCD panel opens fully.
2 Press the middle of the SD memory
card gently until it clicks.
3 Pull the SD memory card out straight.
4 Press the hbutton.
The LCD panel closes.
Inserting an SD memory card
(for AVIC-X950BH, AVIC-X850BT
and AVIC-X8510BT)
%Insert an SD memory card into the SD
card slot.
Insert the SD memory card with the terminal
contacts face-down, and press the card until it
clicks and locks completely.
En 17
Chapter
02
Basic operation
Basic operation
Ejecting an SD memory card
(for AVIC-X950BH, AVIC-X850BT
and AVIC-X8510BT)
1 Press the middle of the SD memory
card gently until it clicks.
2 Pull the SD memory card out straight.
Plugging and unplugging a
USB storage device
CAUTION
!To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
!Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, iPhone, smartphone, or other devices
while using this product.
pThis navigation system may not achieve op-
timum performance with some USB sto-
rage devices.
pConnection via a USB hub is not possible.
pA USB interface cable for iPod (sold sepa-
rately) is required for connection.
Plugging in a USB storage device
1 Pull out the plug from the USB port of
the USB interface cable for iPod.
2 Plug a USB storage device into the USB
interface cable for iPod.
USB interface cable for iPod
USB storage device
Unplugging a USB storage device
%Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
!To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
!Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, iPhone, smartphone, or other devices
while using this product.
En
18
Chapter
02 Basic operation
Connecting your iPod
Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
pA USB interface cable for iPod (sold sepa-
rately) is required for connection.
pFor details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
pConnection via a USB hub is not possible.
1 Check that no USB storage device is
connected.
2 Connect your iPod.
USB interface cable for iPod
Disconnecting your iPod
%Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.
Startup and termination
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
pTo protect the LCD screen from damage, be
sure to touch the touch panel keys only
with your finger and do so gently.
2 Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.
On first-time startup
When you use the navigation system for the
first time, select the language that you want to
use.
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2 Touch the language that you want to
use on screen.
3 Touch the language that you want to
use for the voice guidance.
The navigation system will now restart.
En 19
Chapter
02
Basic operation
Basic operation
4 Read the terms carefully, checking the
details, and then touch [OK] if you agree to
the conditions.
The map screen appears.
Regular startup
%Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
pThe screen shown will differ depending on
the previous conditions.
pIf the anti-theft function is activated, you
must enter your password.
pThe terms appear if the previous condition
was the navigation screen.
Read the terms carefully, checking the de-
tails, and then touch [OK] if you agree to
the conditions.
After you touch [OK], the screen that was
displayed just before turning off the ignition
switch (ACC OFF) is displayed.
A message about the map
database
After you start using this navigation system, a
message related to map data may be dis-
played.
pThis message is displayed the first time you
turn on the navigation system each month.
pTouch the message to close it or it will dis-
appear automatically after eight sec-
onds.
Demonstration images
If you do not operate this navigation system
for five minutes, demonstration images are
displayed.
pThe demonstration images will not be dis-
played if you drive after mounting this navi-
gation system.
Temporarily clearing the
screen (navigation system
in standby mode)
You can temporarily clear the screen at night
or when the screen is too bright.
%Press and hold the MAP button.
The screen is cleared temporarily.
pIf you touch the screen when the navigation
system is in standby mode, it reverts to the
original screen.
Also, if you press the MAP button, the
standby mode is canceled and the current
location screen is displayed. If you press
the MODE button, the standby mode is
canceled and the AV source screen is dis-
played.
pWhen the navigation system is in standby
mode, the navigation guidance does not
output the voice guidance. The audio sound
is output.
pThe standby mode is not canceled by turn-
ing ignition switch on or off.
En
20
Chapter
02 Basic operation
En 21
Chapter
02
Basic operation
Basic operation
How to use the navigation menu screens
1Top Menu
This is the starting menu to access the desired
screens and operate various functions. You
can also check or cancel your set route from
this menu.
pIf you press the HOME button, the
screen of either “Top Menu”or Shortcut
Menu which was being displayed last
time is displayed.
p[Apps] is only available when an iPhone
or a smartphone is connected to this na-
vigation system.
2Shortcut Menu
pIf you press the HOME button, the
screen of either “Top Menu”or Shortcut
Menu which was being displayed last
time is displayed.
3AV operation screen
This is the screen that normally appears when
you play the AV source.
4Map screen
You can use this screen to check the current
vehicle position information and route to the
destination.
5Edit/Settings screen
You can access the screen to customize set-
tings.
6AppRadio Mode screen
En
22
Chapter
02 Basic operation
In this manual, the application menu screen
and the application operation screen are col-
lectively referred to as the “AppRadio Mode
screen”.
7Application menu screen
This navigation system can switch to the ap-
plication menu, which you can display and op-
erate the application for the iPhone or
smartphone on the screen.
8Application operation screen
You can control the iPhone or smartphone ap-
plications directly on the navigation screen.
9Information screen
You can access the screen for handling var-
ious information such as the system informa-
tion of the device.
aEditing route screen
You can edit the conditions for calculating the
current route.
bDestination screen
You can search for your destination on this
menu.
cPhone screen
You can access the screen that is related to
hands-free phoning.
Shortcut Menu
Registering your favorite menu items in short-
cuts allows you to quickly jump to the regis-
tered menu screen by a simple touch on the
Shortcut Menu screen.
Selecting the shortcut
pUp to 10 menu items can be registered in
shortcuts.
1 Display the Shortcut Menu screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch .
The Shortcut selection screen appears.
3 Touch the tab or touch or to dis-
play the icon that you want to set to short-
cut.
Tabs
4 Touch and hold the icon that you want
to add to shortcut.
5 Move the icon to the upper side of the
screen, and then release it.
The selected item is added to shortcut.
Removing a shortcut
1 Touch and hold the icon of the shortcut
you want to remove.
2 Move the icon to the lower side of the
screen, and then release it.
En 23
Chapter
02
Basic operation
Basic operation
Using the touch panel
You can operate the product by touching the
marks and items (touch panel keys) displayed
on the screen directly with your fingers.
Using the common touch panel
keys
1 2
1
The previous screen returns.
2
The screen is closed.
Operating list screens (e.g. POI list)
1
23 4
1
Touching or on the scroll bar scrolls
through the list and allows you to view the re-
maining items.
2Screen title
3Listed items
Touching an item on the list allows you to nar-
row down the options and proceed to the next
operation.
4
If not all the characters can be displayed with-
in the displayed area, touching the key to the
right of the item allows you to see the remain-
ing characters.
Operating the on-screen keyboard
b
1
4327
56
a
9
8
1Keyboard
Touching the keys enters the characters in the
text box.
2
You can switch between capital and lower
case letters.
3ABC
You can enter letters and numbers.
4Space
You can leave spaces.
A space equivalent to the number of touches
is inserted.
5Others
You can enter other characters of alphabet.
pEven if you use any of “A”,“Ä”,“Å”,“Æ”,
the displayed result is the same.
6Sym.
You can enter text with marks such as “&”,
“+”, or numbers.
7OK
Confirms the entry and allows you to proceed
to the next step.
8
Switches the on-screen keyboard layout.
9
Deletes the input text one letter at a time, be-
ginning at the end of the text. Continuing to
touch the key deletes all of the text.
En
24
Chapter
02 Basic operation
a
Allows you to move the cursor to the right or
left for a number of characters equivalent to
the number of touches.
bText box
Displays the characters that are entered. If
there is no text in the box, an informative
guide with text appears.
Swipe action
You can operate some navigation and audio
functions by sliding your fingers vertically and
horizontally while touching the screen.
1 Touch and hold the swipe response
area.
pThe swipe response area varies depending
on the displayed screen.
Example: CD
Swipe response area
j
Operation guide
The operation guide appears.
2 While touching the screen, slide your
finger toward the function you want to
execute and release.
j
The selected function is zoomed in and the
function operates.
Swipe action list
Navigation
Operation
screen Action
Guidance dis-
play
Displays the turning direction
at the next guide point and
the distance, and gives a
voice announcement.
Cancels the display of the in-
tersection guide map.
Hides the street list.
Displays the next guidance
point.
The auto re-
route function
taking into ac-
count traffic
congestion
(*1)
Selects an alternative route.
Selects the current route.
En 25
Chapter
02
Basic operation
Basic operation
Operation
screen Action
The auto re-
route function
taking into ac-
count closed/
blocked roads
(*1)
Restarts the route guidance of
an alternative route.
App View
map
Displays the turning direction
at the next guide point and
the distance, and gives a
voice announcement.
The sound mix function is dis-
abled.
The sound mix function is en-
abled.
(*2)
Displays the “AppRadio
Mode”screen.
(*1) This function is available on AVIC-Z150BH and
AVIC-X950BH.
(*2) Displays this screen after releasing your finger from
the circle.
!The intersection guidance display and the
interchange guidance display
Swipe response area
The other guidance displays
Swipe response area
j
!The auto reroute function taking into ac-
count traffic congestion (for AVIC-Z150BH
and AVIC-X950BH)
Swipe response area
j
En
26
Chapter
02 Basic operation
!The auto reroute function taking into ac-
count closed/blocked roads (for AVIC-
Z150BH and AVIC-X950BH)
Swipe response area
j
Audio
Operation
screen Action
Radio (FM,
AM) (*1)
Skips to the previous preset
channel.
Skips to the next preset chan-
nel.
Unmutes the sound.
Mutes the sound.
HD Radio
(HD Radio™
tuner) (*2)
Skips to the previous preset
channel.
Skips to the next preset chan-
nel.
Unmutes the sound.
Mutes the sound.
Operation
screen Action
Disc (CD, CD-
R, CD-RW)/
Bluetooth
Audio
Skips to the previous track.
Skips to the next track.
Unmutes the sound.
Mutes the sound.
Disc (DVD-
Video)
Skips to the previous chapter.
Skips to the next chapter.
Unmutes the sound.
Mutes the sound.
Disc (DivX
video files)/
SD/USB
Skips to the previous file.
Skips to the next file.
Unmutes the sound.
Mutes the sound.
iPod
Skips to the previous chapter
or song.
Skips to the next chapter or
song.
Unmutes the sound.
Mutes the sound.
Pandora®
Skips to the next track.
Unmutes the sound.
Mutes the sound.
Aha Radio
Skips to the previous content.
Skips to the next content.
Unmutes the sound.
Mutes the sound.
SiriusXM™
tuner
Skips to the previous channel.
Skips to the next channel.
Unmutes the sound.
Mutes the sound.
(*1) A source available on AVIC-X850BT and AVIC-
X8510BT.
(*2) A source available on AVIC-Z150BH and AVIC-
X950BH.
En 27
Chapter
02
Basic operation
Basic operation
Hands-free phoning
Operation
screen Action
Receiving a
phone call
Allows you to talk on the
phone.
Ends the call.
!Receiving a phone call
Swipe response area
j
En
28
Chapter
02 Basic operation
Most of the information provided by your navigation system can be seen on the map. You need to be-
come familiar with how information appears on the map.
How to read the map screen
This example shows an example of a 2D map screen.
1
5
ed c
6
2
3
a
9
7
8
4
b
pInformation with an asterisk (*) appears
only when the route is set.
pDepending on the conditions and settings,
some items may not be displayed.
1Current time
2Scale display touch panel key
Touching [+] or [–] changes the map scale.
You can change the map scale between 10
yards and 1 000 miles (10 meters and 2 000
kilometers).
pThe “_”mark shown below indicates the
scale distance (2D display only).
3Map control
The “View”screen that can set the view mode
and the map orientation appears.
=For details of the operation, refer to
Switching the view mode on page 33.
=For details, refer to Switching the map or-
ientation on page 33.
4Current position
Indicates the current location of your vehicle.
The apex of the triangular mark indicates your
orientation and the display moves automati-
cally as you drive.
pThe apex of the triangular mark is the
actual current position of the vehicle.
5Information bar
Each touch of this key changes the display in-
formation as follows.
!The information of where your vehicle is
traveling along
pWhen “Street Name”is selected on
“Current Location Info.”of “Navi
Settings”, the street name or city
name is displayed. Also, “Coordi-
nates”is selected, latitude and longi-
tude are displayed.
=For details, refer to Setting the cur-
rent street name display on page
140.
En 29
Chapter
03
How to use the map
How to use the map
pWhen there is no data of current po-
sition, no information is displayed.
!The AV source currently selected
pDepending on the source currently
chosen, an image is displayed.
6Phone key
Displays the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
7Direction line*
The direction towards your destination (next
waypoint, or the position of a cursor) is indi-
cated with a straight line.
8Current route*
The route currently set is highlighted in color
on the map. If a waypoint is set on the route,
the route after the next waypoint is high-
lighted in another color.
9Next direction of travel*
As you get closer to the guidance point, the
color of the item changes to green.
aDistance to the guidance point*
Shows the distance to the next guidance
point.
bSecond maneuver arrow*
Shows the turning direction after the next gui-
dance point and the distance to it.
cNumber and name of the street to be used
(or next guidance point)*
Displays the number and name of the upcom-
ing street. If you touch , the street name is
scrolled and hidden letters appear.
dEstimated time of arrival at your destina-
tion or waypoint*
The estimated time of arrival is an ideal value
calculated based on the value set for Minor
Ordinary Road,Major Ordinary Road or
Freeway, and the actual driving speed. The
estimated time of arrival is only a reference
value, and does not guarantee arrival at that
time.
=For details, refer to Changing the virtual
speed of the vehicle on page 143.
eDistance to the destination (or distance to
waypoint)*
Meaning of guidance flags
Icon Meaning
Destination
The checkered flag indicates your desti-
nation.
Waypoint
The red flags indicate your waypoints.
Guidance point
The next guidance point (next turning
point, etc.) is shown by an orange flag.
Enlarged map of the intersection
When “Close Up View”in the “Guide”screen
is “On”, an enlarged map of the intersection
appears.
=For details, refer to Setting the auto-zoom
display on page 143.
pWhen the enlarged map of traffic circle ap-
pears, the exit numbers are displayed on
each exit. The voice guidance is announced
from the entrance to the exit.
En
30
Chapter
03 How to use the map
The display while driving on
the freeway
In certain locations of the freeway, lane infor-
mation is available. The map indicates the re-
commended lane to be in to easily maneuver
the next guidance.
1
While driving on the freeway, freeway exit
numbers and freeway signs may be displayed
in the vicinity of interchanges and exits.
23
4
1Lane information
!Green lane:
Guided lane
Green lane with a white arrow:
Recommended lane
!Gray lane:
Non guided lane
pOn the toll roads, the lanes are in blue
instead of green.
2Freeway exit information
Displays the freeway exit.
3Freeway signs
These show the road number and give direc-
tional information.
4Distance to the next guidance point
These show the distance to the next guidance
point.
pIf the data for these items is not contained
in the built-in memory, the information is
not available even if there are signs on the
actual road.
Types of the road stored in
the map database
Roads included in the route guidance
Turn-by-turn routable roads contain full attri-
bute data and can be used for full route gui-
dance. Pioneer navigation will display full
route guidance, including turn-by-turn voice
directions and arrow icons.
Roads without turn-by-turn
instructions
Routable roads (the route displayed and high-
lighted in pink) have only basic data and can
only be used to plot a navigable route. Pioneer
navigation will display full route guidance, in-
cluding turn-by-turn voice directions and
arrow icons. Please review and obey all local
traffic rules along the highlighted route for
your safety.
No turn-by-turn directions will be displayed on
these roads.
Non-routable roads (light gray-color
roads)
Map display is possible, but cannot be used
for route calculation. Please review and obey
all local traffic rules along this route. (For your
safety.)
Operating the map screen
Scrolling the map to the
position you want to see
1 Display the map screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch and hold the map in the desired
direction to see.
The map moves centered around the position
you have touched.
En 31
Chapter
03
How to use the map
How to use the map
2
13
4
5
1Cursor
2Distance from the current position
3Registration
You can register the location indicated by
the current cursor position as “Favorites”.
=For details, refer to Registering and edit-
ing locations on page 50.
4Vicinity
You can search for the POIs near the cursor
position by selecting a category.
=For details, refer to Searching for a nearby
POI on page 40.
5Go Here
You can search for a route to a destination
indicated by the cursor position.
=For details, refer to Setting a route to
your destination on page 44.
3 To slightly adjust the position, touch
[Adju.] first, then the direction arrow
(eight directions) in which you want to
make slight adjustments.
Each touch of the direction arrow moves the
map little by little.
The direction arrows disappear by touching
[Adju.] again.
pPressing the MAP button returns the map
to the current position.
Viewing information about a
specified location
For the locations you have searched using the
destination menu, you can display the detailed
information as long as the information related
to the location is stored in the system.
1 Search for a location using the “Desti-
nation”screen.
=For details, refer to Chapter 4.
2 Touch .
The “Details”screen appears.
3 Touch the item that you want to check
the detailed information.
The information for the specified location ap-
pears.
1
234
The information shown varies according to the
location. (There may be no information for that
location.)
1
Displays the map screen.
2Go Here
Searches for the route to the displayed loca-
tion.
pIf the route is already set, the displayed
location can be modified to the destina-
tion or a waypoint.
En
32
Chapter
03 How to use the map
3
Enables you to call the position if a tele-
phone number is available. (Pairing with
cellular phone featuring Bluetooth wireless
technology is required.)
4
The previous facility or the next facility ap-
pears when searching for a POI.
Switching the view mode
Various types of screen displays can be se-
lected for navigation guidance.
1 Display the map screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch on the map screen.
The “View”screen appears.
3 Touch the type that you want to set.
You can select the following types:
!2D View (default):
Displays a normal map (2D map).
!3D View:
Displays a map with an antenna view (3D
map).
!App View:
Displays the screen of an application for
the iPhone or smartphone on the right side
of the screen and the map on the left side
of the screen.
If you touch the map, the map is scrolled
on the whole screen. And if you touch the
screen of an application for the iPhone or
smartphone, the AppRadio Mode screen
appears.
=For details, refer to Scrolling the map to
the position you want to see on page 31.
=For details, refer to Swipe action on page
25.
!Rear View:
Displays the rear view image on the right
side of the screen and the map on the left
side of the screen.
pThis mode is available when the rear
view camera setting is set to “On”.
=For details, refer to Setting for rear view
camera on page 161.
Switching the map orientation
You can switch how the map shows your vehi-
cle’s direction between “Heading Up”and
“North Up”.
!Heading Up:
The map display always shows the vehicle’s
direction as proceeding toward the top of
the screen.
En 33
Chapter
03
How to use the map
How to use the map
When “Heading Up”is selected, is dis-
played.
!North Up:
The map display always has north at the
top of the screen.
When “North Up”is selected, is dis-
played.
pThe red arrow indicates north.
pThe map orientation is fixed at “North Up”
when the map scale is 25 miles (50 kilo-
meters) or more.
pThe map orientation is fixed at “Heading
Up”when the 3D map screen is displayed.
pThe map orientation is fixed at “North Up”,
when the current position is displayed re-
gardless of whether the 2D map screen is
displayed or the 3D map is displayed.
1 Display the “View”screen.
=For details of the operation, refer to Switch-
ing the view mode on page 33.
2 Touch [Map Orientation] to switch the
vehicle’s direction.
Each time you touch the key the setting
changes.
Displaying one-way street
marks
You can display one-way street marks.
pYou can turn on or off the one-way street
display on the 0.1 mile (100 meters) scale.
1 Display the “View”screen.
=For details of the operation, refer to Switch-
ing the view mode on page 33.
2 Touch [One-way Disp. on 100m Scale].
Each touch of the key turns on or off the one-
way street display on the 0.1 mile (100 meters)
scale.
Displaying POI on the map
Displays icons for the surrounding facilities
(POI) on the map.
pPOI icons are not displayed when the map
scale is 0.75 mile (1 kilometer) or more.
pUp to 200 items or 100 preinstalled POIs
are displayed on the map.
Displaying preinstalled POIs on
the map
pYou can select up to 200 items from the
subcategories or detailed categories.
1 Display the “View”screen.
=For details of the operation, refer to Switch-
ing the view mode on page 33.
2 Touch [Overlay POI].
3 Touch [Hide], and then touch [View].
pIf you do not want to display the POI icon
on the map, touch [Hide]. (Even if “Hide”is
selected, the POI selection setting is re-
tained.)
#If you touch , the pop-up menu is disap-
peared.
4 Touch the main category you want.
A list of subcategories under the selected
main category appears.
pIf you touch the item, the indicator on the
right of the list turns on and show that the
item is selected. If you touch the same
item, the indicator turns off and the selec-
tion is canceled.
En
34
Chapter
03 How to use the map
5 Touch the subcategory to display.
The indicator of the selected POI lights up and
you can continue to select the POI.
pThe indicator also lights up when several
POI are selected. Touching the facility again
turns off the indicator and deselects the
POI.
pTo select another POI, touch to return
to the Step 2 screen and repeat Step 2 and
3.
6 Touch .
The screen returns to the map screen and the
logo of the selected POI appears.
Registering a scale
You can register a scale for each map accord-
ing to the display method. You can see the
map in the registered scale by pressing the
MAP button even if you switch the view mode.
1 Adjust the map scale to the scale you
want to register.
2 Display the “View”screen.
=For details of the operation, refer to Switch-
ing the view mode on page 33.
3 Touch [Save Scale].
A confirmation message appears.
4 Touch [Yes].
The registration is complete.
En 35
Chapter
03
How to use the map
How to use the map
CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
safe place and put on the parking brake before
setting your route.
pSome information regarding traffic regula-
tions depends on the time when the route
calculation is performed. Thus, the infor-
mation may not correspond with a certain
traffic regulation when your vehicle actually
passes through the location in question.
Also, the information on the traffic regula-
tions provided applies for a passenger vehi-
cle, and not for a truck or other delivery
vehicles. Always follow the actual traffic
regulations when driving.
The basic flow of creating
your route
1Park your vehicle in a safe place and apply
the parking brake.
j
2Display the “Destination”screen.
=For details of the operations, refer to
How to use the navigation menu screens
on page 22.
j
3Select the method of searching for your
destination.
j
4Enter the information about your destina-
tion to calculate the route.
j
5Confirm the location on the map.
=For details, refer to Setting a route to
your destination on page 44.
j
6The navigation system calculates the route
to your destination, and then shows the
route on the map.
j
7Check and decide the route.
=For details, refer to Setting a route to
your destination on page 44.
j
8Your navigation system sets the route to
your destination, and a map of your sur-
roundings appears.
j
9Release the parking brake, and drive in ac-
cordance with the navigation guidance.
En
36
Chapter
04 Searching for and selecting a location
Searching for a location by
address
The most frequently used function is “Ad-
dress”, in which the address is specified and
the destination is searched.
You can select the method of searching for a
location by address.
!Searching for a city name first
!Finding the location by specifying the
house number
Searching for a city name first
pDepending on the search results, some
steps may be skipped.
pWhen you enter characters, the system will
automatically search the database for all
possible options. Only the characters you
enter are active.
pIf the search candidates number reaches
20 or less, the screen automatically
changes to the search result screen.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Address].
3 Touch the key next to “Country”to se-
lect the country.
If the destination is in another country, change
the country setting.
pOnce the country has been selected, you
only have to change countries when your
destination is outside the country you se-
lected.
4 Touch the key next to “State”and
touch the desired state, province, or terri-
tory on the list.
If the location that you want to search for is in
another state, province, or territory, this
changes the area setting.
pOnce the state, province, or territory has
been selected, you only have to change
states, provinces, or territories when your
destination is outside of the state, province,
or territory you selected.
5 Touch [City].
#If you touch [History], the “City History List”
screen appears, enabling you to search by pre-
viously selected city history.
=For details, refer to Searching by selected
city history on page 39.
6 Enter the city name and then touch
[OK].
The “Select City”screen appears.
7 Touch the desired city name.
#If you touch , the geographic center of the
city appears on the map screen.
En 37
Chapter
04
Searching for and selecting a location
Searching for and selecting a location
8 Enter the street name and then touch
[OK].
The “Select a Street”screen appears.
9 Touch the street you want.
10 Enter the house number and then
touch [OK].
The “House Number Selection”screen ap-
pears.
#If you touch [OK] without entering the house
number, a representative location on the street in
the selected city appears.
11 Touch the desired house number range.
The searched location appears on the map
screen.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
Finding the location by
specifying the house number
pDepending on the search results, some
steps may be skipped.
pWhen you enter characters, the system will
automatically search the database for all
possible options. Only the characters you
enter are active.
pIf the search candidates number reaches
20 or less, the screen automatically
changes to the search result screen.
1 Display the “Address Search”screen.
2 Touch [House#].
The “Enter House Number”screen appears.
3 Enter the house number and then
touch [OK].
The “Enter Street Name”screen appears.
4 Enter the street name and then touch
[OK].
The “Select a Street”screen appears.
5 Touch the street you want.
The “Enter City Name”screen appears.
6 Enter the city name and then touch
[OK].
The “Select City”screen appears.
En
38
Chapter
04 Searching for and selecting a location
7 Touch the desired city name.
The “House Number Selection”screen ap-
pears.
If the house number you have entered is not
found, a message appears. In that case, all
house number ranges are listed after touching
[Yes].
#If you touch , the geographic center of the
city appears on the map screen.
8 Touch the desired house number range.
The searched location appears on the map
screen.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
Searching by selected city history
You can search cities from the history that you
have searched by entering the name with the
keyboard and selected by “Address”.
pThe history can store up to 100 cities.
pThe cities are listed in order of the most re-
cent search.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Address].
The “Address Search”screen appears.
3 Touch [History].
The “City History List”screen appears.
4 Touch the desired city name.
#If you touch , the geographic center of the
city appears on the map screen.
5 Enter the street name and then touch
[OK].
The “Select a Street”screen appears.
6 Touch the street you want.
The “Enter House Number”screen appears.
pIf the selected street has only one matching
location, the searched location appears on
the map screen.
7 Enter the house number and then
touch [OK].
The “House Number Selection”screen ap-
pears.
#If you touch [OK] without entering the house
number, a representative location on the street in
the selected city appears.
8 Touch the desired house number range.
The searched location appears on the map
screen.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
Setting up a route to your
home
If your home location is stored, the route to
your home can be calculated by touching a
single key.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Home].
pIf you have not registered your home loca-
tion, a message appears. Touch [Yes]to
start registration.
=For details, refer to Registering your
home on page 134.
Searching for Points of
Interest (POI)
Information about various facilities (Points Of
Interest –POI), such as gas stations, parking
lots or restaurants, is available. You can
search for a POI by selecting the category (or
entering the POI Name).
En 39
Chapter
04
Searching for and selecting a location
Searching for and selecting a location
Searching for a POI directly
from the name of the facilities
pIf the search candidates number reaches
20 or less, the screen automatically
changes to the search result screen.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Spell Name].
The “Spell Name”screen appears.
3 Touch [Name].
#If you change the region to search, touch
[State] and display the “State List”screen to
change the setting.
#If you change the country to search, touch
[Country] and display the “Country List”screen
to configure.
pOnce the country has been selected, you
only have to change countries when your
destination is outside the country you se-
lected.
4 Enter the POI name and then touch
[OK].
The “POI List”screen appears.
5 Touch the POI you want.
The searched location appears on the map
screen.
#If you touch [Sort], the order of POI can be
sorted.
pThe current order is indicated on the upper
right of the screen.
!By Distance:
Sorts the items in the list in order by dis-
tance from the vehicle position.
!By Coincidence:
Sorts the items in the list in order by degree
of consistency with the entered text.
!By Name:
Sorts the items in the list alphabetically,
and the list display can be switched by
switching the alphabet tabs.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
Searching for a nearby POI
You can search for POIs in your surroundings.
pUp to 50 POIs within a 100 miles (160 kilo-
meters) radius of the vehicle position are
listed in order by distance.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Near Me].
POIs are divided into several categories.
pThe “Category History”screen appears if
you have searched for POIs before.
pThe history can be stored up to 10 genres.
You can delete the stored histories collec-
tively.
pIf you want to delete the histories, touch
[Delete All].
pIf you want to search for a genre other than
displayed, touch [Other]. The POI list is dis-
played.
3 Touch the category you want.
The “POI List”screen appears.
pIf there are more detailed categories within
the selected category, repeat this step as
frequently as necessary.
4 Touch the POI you want.
The searched location appears on the map
screen.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
Searching for POIs around the
destination
pThis function is available when the route is
set.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Near Dest.].
POIs are divided into several categories.
En
40
Chapter
04 Searching for and selecting a location
pThe “Category History”screen appears if
you have searched for POIs before.
pThe history can be stored up to 10 genres.
You can delete the stored histories collec-
tively.
pIf you want to delete the histories, touch
[Delete All].
pIf you want to search for a genre other than
displayed, touch [Other]. The POI list is dis-
played.
3 Touch the category you want.
The “POI List”screen appears.
pIf there are more detailed categories within
the selected category, repeat this step as
frequently as necessary.
4 Touch the POI you want.
The searched location appears on the map
screen.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
Searching for POIs around the city
You can search for POIs around a specified
city.
pIf the search candidates number reaches
20 or less, the screen automatically
changes to the search result screen.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Around City].
The “Around City”screen appears.
3 Touch [Country].
The “Country List”screen appears.
#If you change the region to search, touch
[State] and display the “State List”screen to
change the setting.
4 Touch one of the items on the list to set
the country as a search area.
The screen returns to the previous screen.
5 Touch [City].
#If you touch [History], the “City History List”
screen appears, enabling you to search by pre-
viously selected city history.
=For details, refer to Searching by selected
city history on page 39.
6 Enter the city name and then touch
[OK].
The “Select City”screen appears.
7 Touch the desired city name.
POIs are divided into several categories.
pThe “Category History”screen appears if
you have searched for POIs before.
pThe history can be stored up to 10 genres.
You can delete the stored histories collec-
tively.
pIf you want to delete the histories, touch
[Delete All].
pIf you want to search for a genre other than
displayed, touch [Other]. The POI list is dis-
played.
#If you touch , the geographic center of the
city appears on the map screen.
8 Touch the category you want.
The “POI List”screen appears.
pIf there are more detailed categories within
the selected category, repeat this step as
frequently as necessary.
9 Touch the POI you want.
The searched location appears on the map
screen.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
En 41
Chapter
04
Searching for and selecting a location
Searching for and selecting a location
How to read the “POI List”screen
The following information is displayed on the
“POI List”screen.
123
1Facility name
2Facility address
3Distance from the position that the search
starts
pIf you touch , detailed information of the
facility appears.
Deleting the icons displayed
after searching for a nearby POI
After searching for a nearby POI, the icons of
nearby facilities appear on the map. The fol-
lowing operation shows how to delete the
icons.
1 Display the “View”screen.
=For details of the operation, refer to Switch-
ing the view mode on page 33.
2 Touch [Del. Search Results].
All displayed icons are deleted.
Selecting destination from
stored locations
Storing locations you visit frequently saves
time and effort.
Selecting an item from the list provides an
easy way to specify the position.
pThis function is not available if no locations
have been registered in “My POIs”.
=For details, refer to Storing favorite locations
on page 50.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [My POIs].
A list of registered locations appears.
3 Touch the entry you want.
The searched location appears on the map
screen.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
You can switch the list display between “Fa-
vorites”and “History”by touching the tabs.
#If you touch [Sort], you can sort the entry by
following order.
!By Date (default):
Sorts the list in chronological order of regis-
tration or call up.
!By Distance:
Sorts the list in order by distance from the
vehicle position.
!By Name:
Sorts the list alphabetically.
Selecting a location you
searched for recently
The places that you set as destinations or way-
points previously are automatically stored in
“History”.
pIf no location is stored in Destination His-
tory, you cannot select [History]. (If you
perform a route calculation, you can select
[History].)
En
42
Chapter
04 Searching for and selecting a location
p“History”can store up to 100 locations. If
the entries reach the maximum, any further
entry will overwrite the oldest one.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [My POIs].
3 Touch [History].
A list of locations where you have selected ap-
pears.
4 Touch the entry you want.
The searched location appears on the map
screen.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
Searching for a location by
coordinates
Entering a latitude and longitude pinpoints
the location.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Coordinates].
3 Touch [East] or [West], and then enter
the longitude.
To enter W 50°1’2.5”for example, touch
[West], [0], [5], [0], [0], [1], [0], [2], and [5].
4 Touch [North] or [South], and then
enter the latitude.
To enter N 5°1’2.5”for example, touch [North],
[0], [5], [0], [1], [0], [2], and [5].
5 Touch [OK].
The searched location appears on the map
screen.
=For subsequent operations, refer to Setting
a route to your destination on page 44.
En 43
Chapter
04
Searching for and selecting a location
Searching for and selecting a location
Setting a route to your
destination
1 Search for a location.
=For details, refer to Chapter 4.
After searching for the destination, the Loca-
tion confirmation screen appears.
2 Touch [Go Here].
Location confirmation screen
The destination is set, and then the route cal-
culation starts.
When the route calculation is completed, the
Route confirmation screen appears.
pIf you press the MAP button during route
calculation, the calculation is canceled and
the map screen appears.
pIf the route is already set, the screen for ask-
ing whether the searched location becomes
the destination or a waypoint appears. If
you touch [Destination], the current desti-
nation is deleted and the route to a new
destination is searched.
If you touch [Waypoint], the route for stop-
ping by the searched location on the way to
the same destination is searched.
Route confirmation screen
1
2
3
1Route calculation condition
2Distance to the destination
3Travel time to your destination
#If you touch [Profile], the “Route Profile”
screen appears.
=For details, refer to Checking the current itin-
erary on page 45.
#If you touch [Waypoints], the “Waypoints
List”screen appears.
=For details, refer to Editing waypoints on
page 47.
#When there are multiple routes following a
search, [Oth. Route] appears.
If you touch [Oth. Route], you can select a route
with conditions that may differ from those of the
currently selected route.
=For details, refer to Displaying multiple
routes on page 44.
When there is only one route, [Route Map] ap-
pears.
If you touch [Route Map], the entire route is dis-
played on one screen.
pOn the route map screen, you can scroll the
map or change its scale.
=For details, refer to Scrolling the map to
the position you want to see on page 31.
=For details, refer to How to read the map
screen on page 29.
#If you touch , a message confirming
whether to cancel the calculated route appears.
If you touch [Yes], the calculated route is can-
celed and the map screen appears.
3 Touch [OK].
The displayed route is set as your selected
route, and route guidance starts.
Displaying multiple routes
You can select a desired route from multiple
route options.
pIf you set waypoints, you cannot display
multiple routes.
1 Touch [Oth. Route] on the Route confir-
mation screen.
Multiple route options appear.
2 Touch to .
Another route is displayed.
3 Touch [OK].
The displayed route is set as your selected
route, and route guidance starts.
En
44
Chapter
05 After the location is decided
Displaying the route overview
pThe route overview is only active when the
route is set.
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
1234
5
1Profile
You can confirm the set route.
=For details, refer to Checking the current
itinerary on page 45.
2Options
You can add a waypoint along the route and
set the route which passes through it. You
can also change search criteria.
=For details, refer to Modifying the route
calculation conditions on page 46.
=For details, refer to Editing waypoints on
page 47.
3Skip Wpt.
If you no longer need to stop by the regis-
tered waypoint, you can search a route
again by supposing that you have already
passed the waypoint.
=For details, refer to Skipping a waypoint
on page 48.
4Demo ON
You can confirm the route from the demon-
stration of the driving of the route from the
starting point and final destination.
=For details, refer to Using the demonstra-
tion guidance on page 48.
Demo OFF
While the demonstration guidance is run-
ning, [Demo OFF] appears. Touching the
key finishes the demonstration guidance.
5Cancel Route
You can delete the current route.
=For details, refer to Canceling the route
guidance on page 49.
2 Touch the item that you want to re-
fine.
Checking the current itinerary
You can check the route details.
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Profile].
The “Route Profile”screen appears.
12
3
1Current position
2Guidance point
3
The screen is closed.
pWhen you display the “Route Profile”
screen by touching [Profile] on the
Route confirmation screen, [OK] ap-
pears.
Touching this key starts the route gui-
dance on the displayed route.
En 45
Chapter
06
Checking and modifying the current route
Checking and modifying the current route
Modifying the route
calculation conditions
You can modify the conditions for route calcu-
lation and recalculate the current route.
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Options], and then touch [Route
Options].
The “Route Options”screen appears.
#If you touch , the pop-up menu is disap-
peared.
3 Touch the desired items to change the
route calculation conditions and then
touch [OK].
The route is recalculated, and the Route con-
firmation screen appears.
Items that users can operate
Settings marked with an asterisk (*) are de-
fault or factory settings.
Route Condition
This setting controls how the route should be
calculated by taking into account the time, dis-
tance or main road.
Determines which condition takes priority for
route calculation.
Fast*:
Calculates a route with the shortest travel time
to your destination as a priority.
Short:
Calculates a route with the shortest distance
to your destination as a priority.
Main Road:
Calculates a route that passes major arterial
roads as a priority.
Toll Road
This setting controls whether toll roads (in-
cluding toll areas) should be taken into ac-
count.
Use*:
Calculates a route that may include toll roads
(including toll areas).
Avoid:
Calculates a route that avoids toll roads (in-
cluding toll areas).
pThe system may calculate a route that in-
cludes toll roads even if “Avoid”is se-
lected.
Ferry
This setting controls whether ferry crossings
should be taken into account.
Use*:
Calculates a route that may include ferries.
Avoid:
Calculates a route that avoids ferries.
pThe system may calculate a route that in-
cludes ferries even if “Avoid”is selected.
Freeway
This setting controls whether freeways may be
included in the route calculation.
Use*:
Calculates a route that may include freeways.
Avoid:
Calculates a route that avoids freeways.
pThe system may calculate a route that in-
cludes freeways even if “Avoid”is
selected.
En
46
Chapter
06 Checking and modifying the current route
Editing waypoints
You can edit waypoints (locations you want to
visit on the way to your destination) and recal-
culate the route so that it passes through
these locations.
Adding a waypoint
pUp to five waypoints can be set.
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Options], and then touch [Way-
points].
The “Waypoints List”screen appears.
#If you touch , the pop-up menu is disap-
peared.
3 Touch [Add].
The “Add”screen appears.
4 Search for a location.
=For details, refer to Chapter 4.
5 Touch [OK] on the “Waypoints List”
screen.
6 Touch [OK].
The route is recalculated, and the Route con-
firmation screen appears.
pIf you set waypoints, you cannot display
multiple routes.
Deleting a waypoint
You can delete waypoints from the route and
then recalculate the route. (You can delete
successive waypoints.)
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
En 47
Chapter
06
Checking and modifying the current route
Checking and modifying the current route
2 Touch [Options], and then touch [Way-
points].
The “Waypoints List”screen appears.
3 Touch [Delete].
The “Delete”screen appears.
4 Select the waypoint that you want to
delete.
A check mark appears next to the selected
waypoint.
5 Touch [Delete].
A message confirming whether to delete the
waypoint appears.
6 Touch [Yes].
The selected waypoint will be deleted from the
list.
7 Touch [OK] on the “Waypoints List”
screen.
The route is recalculated, and the Route con-
firmation screen appears.
8 Touch [OK].
A map of the current position appears.
Sorting waypoints
You can sort waypoints and recalculate the
route.
pYou cannot sort waypoints that you have al-
ready passed.
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Options], and then touch [Way-
points].
The “Waypoints List”screen appears.
3 Touch [Sort], and then touch [Manual].
You can specify the order of waypoints to sort.
#If you touch [Automatic], the waypoints are
sorted in the order of the nearest one from the
current location.
4 Touch the waypoint or destination.
Put them in the desired order.
5 Touch [OK].
The “Waypoints List”screen appears.
6 Touch [OK] on the “Waypoints List”
screen.
The route is recalculated, and the Route con-
firmation screen appears.
7 Touch [OK].
A map of the current position appears.
Skipping a waypoint
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Skip Wpt.].
The next waypoint is considered to have al-
ready been passed through, and a route is
searched.
Using the demonstration
guidance
You can confirm the route by making the navi-
gation system run to the destination from the
point of departure on screen.
pThe demonstration is repeated, but finishes
in the following cases:
!When starting actual driving
!When searching a route
!When deleting route
!When is touched [Demo OFF].
En
48
Chapter
06 Checking and modifying the current route
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Demo ON].
3 Display the map screen.
The demonstration guidance will begin.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
Finishing the demonstration
guidance
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Demo OFF].
The demonstration guidance is finished.
pYou can also finish the demonstration gui-
dance by touching and then touch-
ing [Yes] while the demonstration guidance
is running.
Canceling the route guidance
If you no longer need to travel to your destina-
tion, follow the steps below to cancel the route
guidance.
1 Display the editing route screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Cancel Route].
A message confirming the cancellation of the
current route appears.
3 Touch [Yes].
The current route is deleted, and a map of
your surroundings reappears.
pYou can also cancel the route by touching
on the “Top Menu”screen.
En 49
Chapter
06
Checking and modifying the current route
Checking and modifying the current route
Registering and editing
locations
Storing favorite locations
Storing your favorite locations as “Favorites”
lets you save the time and effort of re-entering
this information. Stored items can be made
available on “Favorites”later.
“Favorites”can store up to 400 locations.
Home location is counted as one of the items
in “Favorites”.
1 Search for a location.
=For details about the search methods, refer
to Chapter 4.
2 When the map of the location you
want to register is displayed, touch [Regis-
tration].
The location is registered, the location name
input screen appears.
=For details, refer to Editing registered loca-
tions on page 50.
3 Touch [OK].
The registration is complete.
Editing registered locations
1 Display the “Edit/Settings”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Data Edit].
The “Edit”screen appears.
3 Touch [Edit Favorite].
The “Edit Favorite”screen appears.
4 Touch [Edit].
The “Edit Favorite”screen appears.
pHome location is displayed on the top of
the list.
5 Touch the location that you want to
edit.
6 Touch the item you want to configure.
2
3
1
4
5
1Name
You can enter the desired name.
pUp to 40 characters can be input for the
name.
2Phone#
You can edit the registered phone number.
The maximum digits you can enter for the
phone number is 24.
3Icon
You can change the symbol displayed on
the map and the “Edit Favorite”screen.
4Sound Effects
You can edit the sound effects of registered
locations.
5Change Position
You can change the registered location by
scrolling the map.
7 Touch .
The registration is complete.
Deleting a favorite location
from the list
1 Display the “Edit/Settings”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Data Edit].
The “Edit”screen appears.
3 Touch [Edit Favorite].
The “Edit Favorite”screen appears.
En
50
Chapter
07
Editing the data on the use of navigation function
4 Touch [Delete].
5 Select the location you want to delete.
A check mark appears next to the selected lo-
cation.
#If you touch [All], you can select all entries. If
you want to deselect all entries, touch [None].
6 Touch [Delete].
A message will appear asking you to confirm
the deletion.
7 Touch [Yes].
The data you selected is deleted.
#If you touch [No], the deletion is canceled.
Deleting the destination
history from the list
Items in “History”can be deleted. All entries
in “History”can be deleted collectively.
1 Display the “Edit/Settings”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Data Edit].
The “Edit”screen appears.
3 Touch [Delete Search History].
The “History”screen appears.
4 Select the location you want to delete.
A check mark appears next to the selected lo-
cation.
#If you touch [All], you can select all entries. If
you want to deselect all entries, touch [None].
5 Touch [Delete].
A message will appear asking you to confirm
the deletion.
6 Touch [Yes].
The data you selected is deleted.
#If you touch [No], the deletion is canceled.
En 51
Chapter
07
Editing the data on the use of navigation function
Editing the data on the use of navigation function
Deleting learned routes
The device learns the streets you often use,
and the learned streets are preferentially used
during a route search. To change a frequently
used street, delete the learned route and let
the device learn it again.
pPlease note that all the learned routes will
be deleted.
1 Display the “Edit/Settings”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Data Edit].
The “Edit”screen appears.
3 Touch [Delete Learned Routes].
A confirmation message appears.
4 Touch [Yes].
Deletes the learned routes.
Deleting track logs
You can delete track logs displayed on the
map screen.
pYou can also automatically delete track
logs.
1 Display the “Edit/Settings”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Data Edit].
The “Edit”screen appears.
3 Touch [Delete Travel Log].
A confirmation message appears.
4 Touch [Yes].
Deletes the track log.
En
52
Chapter
07
Editing the data on the use of navigation function
pThis function is available on AVIC-Z150BH
and AVIC-X950BH.
You can check real-time traffic information
transmitted by the Traffic Message Channel
(TMC) of the FM Radio Data System (RDS) on
screen. The traffic information is updated peri-
odically. When the navigation system receives
updated traffic information, the navigation sys-
tem will show it on map and display detailed
text information when available. When you re-
ceive information concerning traffic incidents
on your route, the system will suggest another
route to avoid traffic congestion.
pWhen used in North America, this product
receives traffic information provided by
Clear Channel Broadcasting, Inc.
©Clear Channel Broadcasting, Inc.
pThe system acquires the traffic information
up to 100 miles in radius from the vehicle
position. (If there is a lot of traffic informa-
tion around your vehicle, the radius will be
shorter than 100 miles.)
pThe navigation system provides the follow-
ing functions by using the information
from RDS-TMC service:
!Displaying a list of traffic information
!Displaying traffic information on a map
!Suggesting a route to avoid traffic con-
gestion by using traffic information
pThe term “traffic congestion”in this section
refers to the following types of traffic infor-
mation: stop and go traffic, stopped traffic
and closed/blocked roads. This information
is always taken into consideration when
checking your route, and the information
related to these events cannot be turned
off.
Checking all traffic
information
Traffic information except traffic flow informa-
tion is listed on screen. This allows you to
check how many traffic incidents have oc-
curred, their location and their distance from
your current position.
1 Display the “Information”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Trfc info.].
The “Traffic Information Menu”screen ap-
pears.
3 Touch [Nearby Incidents].
The “Nearby”screen appears.
A list with received traffic information is
shown.
4 Select an incident you want to view in
detail.
1
234
1Listed items
The details of the selected incident are dis-
played.
2Update
If you touch [Update] while new traffic in-
formation is received, the current informa-
tion is updated and old information is
removed. The traffic information list is up-
dated to reflect the new situation.
3Sort
Touching the key displays the following
pop-up menu to sort the traffic information.
!By Distance:
You can sort traffic information by dis-
tance from your current position.
When you touch [Nearby Incidents],
the list displayed will be sorted accord-
ing to the linear distance from the vehi-
cle position to the traffic information.
En 53
Chapter
08
Using traffic information
Using traffic information
When you touch [Traffic on Route], the
list displayed will be sorted according to
the distance from the vehicle position to
the traffic information.
!By Name:
You can sort the traffic information in al-
phabetical order.
!By Event:
You can sort the traffic information ac-
cording to the incident.
The list will be sorted in the order of
closed/blocked roads, traffic congestion,
accidents, road works and others.
4
The details of the selected incident are dis-
played.
5 Touch .
The previous screen returns.
Checking traffic
information on the route
All traffic information on the current route is
displayed on screen in a list.
1 Display the “Information”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Trfc info.].
The “Traffic Information Menu”screen ap-
pears.
3 Touch [Traffic on Route].
The “On Route”screen appears.
The method for checking the content dis-
played on the screen is the same as “Nearby”
screen.
=For details, refer to Checking all traffic infor-
mation on page 53.
How to read traffic
information on the map
The traffic event information displayed on the
map is as follows.
pA line is displayed only when the map scale
is 2.5 miles (5 km) or lower.
pIcons appear only when the scale on the
map is 10 miles (20 km) or lower. If the
scale is changed, the icons are resized ac-
cording to the selected scale.
Traffic event icon
!with yellow line:
Stop-and-go traffic
!with red line:
Stopped traffic
!with black line:
Closed/blocked roads
!etc.:
Accidents, constructions, etc.
Setting an alternative route
to avoid traffic congestion
The navigation system regularly whether or
not there is traffic information on your route. If
the navigation system detects any traffic con-
gestion on your current route, the system tries
to find a better route in the background.
pThe following types of traffic incidents on
the route will be checked for: slow, queuing
and stopped traffic, and closed/blocked
roads except for closed freeway exits/en-
trances.
En
54
Chapter
08 Using traffic information
pIf the navigation system detects any closed/
blocked roads on your current route, “Re-
routing due to road closure.”is an-
nounced and displayed on the screen. Only
recommended route is available. Touch
[OK] to start the route guidance.
Checking for traffic congestion
automatically
If there is information about traffic congestion
on your current route and if an alternative
route can be found, the navigation system will
recommend a new alternative route automati-
cally. In such a case, the following screen will
appear.
1
2
3
1Distance from the current position of your ve-
hicle to the point of entry into the new route.
2Difference in distance between the existing
route and new route.
3Difference in travel time between the existing
route and new route.
pNo action is taken if the system cannot find
any traffic congestion information on your
route or cannot find an alternative.
%Touch [Alt. Route].
The recommended route is set as your route,
and the route guidance starts.
pWhen no selection is made, the recom-
mended route or the current route will be
automatically selected according to the set-
tings. And the route guidance starts.
=For details, refer to Setting to select your
route automatically using the auto reroute
function on page 142.
#If you touch [Current Route] while the recom-
mended route is displayed, the screen switches
to the current route displayed, and route gui-
dance starts.
#If you touch [Scroll Map], you can switch the
map scale or the map orientation and confirm
the route.
Selecting the preferred RDS-
TMC service provider manually
A default preferred TMC service provider for
each country has been set. The navigation sys-
tem tunes to the radio station with good recep-
tion among the preferred RDS-TMC service
providers. If you want to set another preferred
RDS-TMC service provider, you can manually
select one from the available RDS-TMC service
providers.
1 Display the “Information”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Trfc info.].
The “Traffic Information Menu”screen ap-
pears.
3 Touch [TMC Provider Selection].
4 Touch the desired service provider on
the list.
After touching a service provider, the system
starts tuning to the selected RDS-TMC service
provider. When the tuning is successful, the
system returns to the map display.
En 55
Chapter
08
Using traffic information
Using traffic information
If your devices feature Bluetooth®technology,
this navigation system can be connected to
your devices wirelessly. This section describes
how to set up a Bluetooth connection.
For details about the connectivity with the de-
vices featuring Bluetooth wireless technology,
refer to the information on our website.
Preparing communication
devices
This navigation system has a built-in function
to use devices featuring Bluetooth wireless
technology.
=For details, refer to Notes for hands-free
phoning on page 69.
You can register and use devices that feature
the following profiles with this navigation sys-
tem.
!HFP (Hands-Free Profile)
!A2DP (Advanced Audio Distribution Pro-
file)
!SPP (Serial Port Profile)
pWhen the navigation system is turned off,
the Bluetooth connection is also discon-
nected. When the system restarts, the sys-
tem automatically attempts to reconnect
the previously-connected device. Even
when the connection is severed for some
reason, the system automatically recon-
nects the specified device (except when the
connection is severed due to device oper-
ation).
Registering your Bluetooth
devices
You need to register your devices featuring
Bluetooth wireless technology when you con-
nect it for the first time. A total of 5 devices
can be registered. Two registration methods
are available:
!Searching for nearby Bluetooth devices
!Pairing from your Bluetooth devices
pIf you try to register more than 5 devices,
the system will ask you to select one of the
registered devices to delete.
=For details, refer to Deleting a registered
device on page 59.
Searching for nearby Bluetooth
devices
The system searches for available Bluetooth
devices near the navigation system, displays
them in a list, and registers them for connec-
tion.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the “Phone”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
3 Touch [Bluetooth Settings].
The “Bluetooth Settings”screen appears.
4 Touch [Registration].
The “Device List”screen appears.
The system searches for Bluetooth devices
waiting for the connection and displays them
in the list if a device is found.
pUp to 10 devices will be listed in the order
that the devices are found.
En
56
Chapter
09 Registering and connecting a Bluetooth device
5 Wait until your Bluetooth device ap-
pears in the list.
pIf you cannot find the Bluetooth device that
you want to connect, check that the device
is waiting for the Bluetooth wireless tech-
nology connection.
6 Touch the Bluetooth device name you
want to register.
#If you touch [Search], the system starts
searching for Bluetooth devices waiting for con-
nection, and displays them in the list format
when any devices are detected.
7 Pair this navigation system with your
Bluetooth device.
When the Bluetooth device connects to this
product for the first time, a pairing operation
is needed to specify the device to connect.
How the pairing is performed varies depend-
ing on the Bluetooth device. Perform pairing
according to the screen instructions for this
product or Bluetooth device. Refer to the in-
struction manual of your devices to register
(registration and authentication of device).
After registering, a confirmation message ap-
pears.
8 Touch [OK].
The registration is complete, and the device is
connected as a hands-free phone.
You can perform the following setting depend-
ing on the Bluetooth device registered.
!Transferring the phone book
You can transfer the phone book to the navi-
gation system if the registered Bluetooth
device features PBAP (Phone Book Access
Profile).
If you touch [Yes], you can transfer the
whole phone book to the navigation system,
and then the message that transfer is fin-
ished appears.
!Selecting whether to use the Bluetooth
audio
You can select whether to use the
Bluetooth audio function if the registered
Bluetooth device features Bluetooth audio.
The message “Is this Android?”appears.
9 Touch [Yes] if the Bluetooth device you
connected is an Android device.
!Yes:
Allows you to proceed to the next step.
!No:
The device is registered in the navigation
system. After the device is successfully re-
gistered, the Bluetooth connection is estab-
lished from the navigation system.
pOnly the Android device (for AVIC-Z150BH
and AVIC-X950BH) can be performed the
smartphone cooperation function
(AppRadio Mode,aha and Pandora) with
via Bluetooth wireless technology.
The message “Do you want to set this de-
vice for the AppRadio Mode?”appears.
En 57
Chapter
09
Registering and connecting a Bluetooth device
Registering and connecting a Bluetooth device
10 Touch [Yes] if you use the AppRadio
Mode with a device you registered.
!Yes:
Allows you to proceed to the next step.
!No:
The device is registered in the navigation
system. After the device is successfully re-
gistered, the Bluetooth connection is estab-
lished from the navigation system.
11 Touch [OK].
Pairing from your Bluetooth
devices
You can register the Bluetooth device by set-
ting the navigation system to standby mode
and requesting connection from the Bluetooth
device.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the “Phone”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
3 Touch [Bluetooth Settings].
The “Bluetooth Settings”screen appears.
4 Touch [Registration].
The “Device List”screen appears.
5 Touch [Register from device].
The navigation system waits for a Bluetooth
wireless technology connection.
6 Register the navigation system on your
Bluetooth device.
If your device asks you to enter a password,
enter the password of the navigation system.
When the device is successfully registered,
the connection settings are made from the de-
vice.
pIf registration fails, repeat the procedure
from the beginning.
7 Touch [OK].
The registration is complete, and the device is
connected as a hands-free phone.
You can perform the following setting depend-
ing on the Bluetooth device registered.
!Transferring the phone book
You can transfer the phone book to the navi-
gation system if the registered Bluetooth
device features PBAP (Phone Book Access
Profile).
If you touch [Yes], you can transfer the
whole phone book to the navigation system,
and then the message that transfer is fin-
ished appears.
!Selecting whether to use the Bluetooth
audio
You can select whether to use the
Bluetooth audio function if the registered
Bluetooth device features Bluetooth audio.
The message “Is this Android?”appears.
8 Touch [Yes] if the Bluetooth device you
connected is an Android device.
!Yes:
Allows you to proceed to the next step.
!No:
The device is registered in the navigation
system. After the device is successfully re-
gistered, the Bluetooth connection is estab-
lished from the navigation system.
pOnly the Android device (for AVIC-Z150BH
and AVIC-X950BH) can be performed the
smartphone cooperation function
(AppRadio Mode,aha and Pandora) with
via Bluetooth wireless technology.
The message “Do you want to set this de-
vice for the AppRadio Mode?”appears.
9 Touch [Yes] if you use the AppRadio
Mode with a device you registered.
!Yes:
En
58
Chapter
09 Registering and connecting a Bluetooth device
Allows you to proceed to the next step.
!No:
The device is registered in the navigation
system. After the device is successfully re-
gistered, the Bluetooth connection is estab-
lished from the navigation system.
10 Touch [OK].
Deleting a registered device
When you have already registered 5 Bluetooth
devices and you want to add another, you
must first delete one of the registered devices.
pIf a registered phone is deleted, all the
phone book entries and call history lists
that correspond to the phone will be also
cleared.
1 Display the “Phone”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Bluetooth Settings].
The “Bluetooth Settings”screen appears.
3 Touch [Delete Device].
The “Delete Registered Device”screen ap-
pears.
4 Touch the Bluetooth device name that
you want to delete.
A message prompting you to delete a regis-
tered device appears.
5 Touch [Yes].
The device is deleted.
pIf the device you deleted was set for the
priority connecting as a hands-free phone,
Bluetooth audio player or smartphone, this
navigation system needs to set another de-
vice for priority connecting.
Connecting a registered
Bluetooth device manually
The navigation system automatically connects
the Bluetooth device selected as the target of
connection. However, connect the Bluetooth
device manually in the following cases:
!Two or more Bluetooth devices are regis-
tered, and you want to manually select the
device to be used.
!You want to reconnect a disconnected
Bluetooth device.
!Connection cannot be established automa-
tically for some reason.
If you start connection manually, carry out the
following procedure. You can also connect the
Bluetooth device by having the navigation sys-
tem detect it automatically.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the “Phone”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
3 Touch [Bluetooth Settings].
The “Bluetooth Settings”screen appears.
4 Touch [Change Device].
The “Change Bluetooth Device”screen ap-
pears.
En 59
Chapter
09
Registering and connecting a Bluetooth device
Registering and connecting a Bluetooth device
5 Touch the name of the device that you
want to connect.
6 Touch the profile that you want to con-
nect.
You can select the following profiles:
!Handsfree:
Connects the device as a hands-free phone.
!Bluetooth Audio:
Connects the device as a Bluetooth audio
player.
!AppRadio Mode (Android):
Connects the device as a smartphone in
AppRadio Mode.
7 Touch [OK].
Connection starts.
pIf you select the “AppRadio Mode
(Android)”when “App Connection Set-
tings”is set to “iPhone”,“Device Selection
for AppRadio Mode”appears. Select
whether smartphone cooperation is per-
formed with an Android device.
=For details, refer to Selecting the device
connection method on page 157.
When a connection is successfully estab-
lished, a connection complete message ap-
pears and the map screen returns by touching
[OK].
pTo cancel the connection to your device,
touch [Cancel].
pIf connection fails, check whether your de-
vice is waiting for a connection and then
retry.
8 Touch [OK].
Setting for priority connecting
The selected device is set for priority connect-
ing.
And one of the following icons is indicated
next to the device name.
Appears when the device is registered
so that it will be preferentially paired
with the smartphone in AppRadio
Mode.
Appears when the device is registered
so that it will be preferentially paired
with the Bluetooth audio connection.
Appears when the device is registered
so that it can be preferentially paired
with the hands-free connection.
En
60
Chapter
09 Registering and connecting a Bluetooth device
CAUTION
For your safety, avoid talking on the phone as
much as possible while driving.
If your cellular phone features Bluetooth tech-
nology, this navigation system can be con-
nected to your cellular phone wirelessly. Using
this hands-free function, you can operate the
navigation system to make or receive phone
calls. You can also transfer the phone book
data stored in your cellular phone to the navi-
gation system. This section describes how to
set up a Bluetooth connection and how to op-
erate a cellular phone featuring Bluetooth
technology on the navigation system.
For details about the connectivity with the de-
vices featuring Bluetooth wireless technology,
refer to the information on our website.
Displaying the phone menu
Use the “Phone”if you connect the cellular
phone to the navigation system for utilization.
=For details, refer to Chapter 9.
1 Press the HOME button to display the
“Top Menu”screen.
2 Touch [Phone].
The “Phone”screen appears.
21 345
1Reception status of the cellular phone
2Network name of the cellular phone com-
pany
3Battery status of the cellular phone
4Strength of the Bluetooth connection be-
tween the navigation system and the device
5Name of the connected cellular phone
Making a phone call
You can make a phone call in many different
ways.
123 4
5
1
The call ends.
2,
The hands-free function is turned on or off. If
you want to talk on the cellular phone, turn off
the hands-free function.
3
The dial pad appears.
4,
You can adjust the volume when talking.
5
The operation menu during call is minimized.
Direct dialing
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Dial Pad].
En 61
Chapter
10
Using hands-free phoning
Using hands-free phoning
3 Touch the number keys to enter the
phone number.
When the input is complete, [OK] becomes
active.
#If you touch , the entered number is de-
leted one digit at a time from the end of the num-
ber. Press and hold to delete all digits.
4 Touch [OK] to make a call.
pTo cancel the call after the system starts
dialing, touch [Cancel]or .
5 Touch to end the call.
The call ends.
pYou may hear a noise when you hang up
the phone.
#If you touch , the operation menu is mini-
mized during the call.
To display the menu again, touch .
Calling a number in the phone
book
You can select and call a contact from the
phone book entries transferred to the naviga-
tion system.
pBefore using this function, you need to
transfer the phone book entries stored in
your cellular phone to the navigation sys-
tem.
=For details, refer to Transferring the phone
book on page 65.
Searching for a contact to call on the
alphabet tabs
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Contacts List].
The “Contacts List”screen appears.
3 Touch alphabet tabs.
The screen jumps to the top of the page dis-
playing the entries that start with the selected
letter or number.
pTouching the alphabet tabs displays all en-
tries that start with symbols.
pTouching [Num] displays all entries that
start with numbers.
pTouching [Oth.] displays the page including
entries that are not assigned to any of the
other tabs.
#If you touch [Sort], the names can be sorted.
Each touch of [Sort] changes the settings as fol-
lows:
!First (default):
En
62
Chapter
10 Using hands-free phoning
Switches the contact entries to first/last
name display and sorts the entries by order
of first name.
!Last:
Switches the contact entries to last/first
name display and sorts the entries by order
of last name.
pDepending on the type of cellular phone,
the settings may not be available.
4 Touch the desired name on the list.
5 Touch the desired entry on the list to
make a call.
A call confirmation message appears.
6 Touch [Yes].
Dialing starts.
pTo cancel the call after the system starts
dialing, touch [Cancel]or .
7 Touch to end the call.
Calling a number by searching by name
You can search by the names registered in the
“Contacts List”screen.
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Contacts List].
The “Contacts List”screen appears.
3 Touch [Search].
4 Enter the desired name and then touch
[OK].
The “Contacts Name Search Results”screen
appears.
5 Touch the desired name on the list.
6 Touch the desired entry on the list to
make a call.
A call confirmation message appears.
7 Touch [Yes].
Dialing starts.
pTo cancel the call after the system starts
dialing, touch [Cancel]or .
8 Touch to end the call.
Dialing from the history
The most recent calls made (dialed), received
and missed are stored in the call history list.
You can browse the call history list and call
numbers from it.
pEach call history saves 30 calls per regis-
tered cellular phone. If the number of calls
exceeds 30, the oldest entry will be deleted.
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Call History].
3 Touch [Received], [Dialed] or [Missed].
The selected call history list appears.
4 Touch an entry on the list.
A call confirmation message appears.
5 Touch [Yes].
Dialing starts.
pTo cancel the call after the system starts
dialing, touch [Cancel]or .
6 Touch to end the call.
En 63
Chapter
10
Using hands-free phoning
Using hands-free phoning
Redialing a call
You can call again to the number that was
sent last.
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Redial].
A call confirmation message is displayed.
3 Touch [Yes].
Dialing starts.
Dialing a favorite location
You can make a call to an entry stored in the
“My POIs”list.
1 Display the “Destination”screen.
=For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [My POIs].
3 Touch next to the location that you
want to make a call.
The “Details”screen appears.
4 Touch to make a call.
Dialing starts.
pTo cancel the call after the system starts
dialing, touch [Cancel]or .
5 Touch to end the call.
Dialing a facility’s phone number
You can make a call to facilities with phone
number data.
pYou cannot make a call to locations or POIs
that have no phone number data.
1 Search for the POI.
The “POI List”screen appears.
=For details of the operations, refer to Search-
ing for Points of Interest (POI) on page 39.
2 Touch next to the POI that you want
to call.
The “Details”screen appears.
3 Touch to make a call.
Dialing starts.
pTo cancel the call after the system starts
dialing, touch [Cancel]or .
4 Touch to end the call.
En
64
Chapter
10 Using hands-free phoning
Receiving a phone call
You can perform hands-free answering by
using the navigation system.
Answering an incoming call
The system informs you that it is receiving a
call by displaying a message and producing a
ring sound.
pYou can set the system to automatically an-
swer incoming calls. If not set to automati-
cally answer incoming calls, you will have
to answer the calls manually.
=For details, refer to Answering a call
automatically on page 68.
pIf the voice on the other end of the call is
too quiet to hear, you can adjust the volume
of the received voice.
=For details, refer to Setting the Volume
for Guidance and Phone on page 136.
pThe registered name appears if the phone
number of the received call is already regis-
tered in “Contacts List”.
pDepending on the caller ID service, the
phone number of the received call may not
be displayed. “Call from an unknown call-
er.”appears instead.
1
To answer an incoming call, touch .
The operation menu during a call appears.
#If you touch , the incoming call is re-
jected.
The rejected call is recorded in the missed call
history list.
=For details, refer to Dialing from the history
on page 63.
2 Touch to end the call.
The call ends.
pYou may hear a noise when you hang up
the phone.
#If you touch or , you can turn on or off
the hands-free function. Turn this off if you want
to talk on the cellular phone.
#If you touch , you can dial during a call.
#If you touch [–]or[+], you can adjust the vo-
lume when talking.
#If you touch , the operation menu is mini-
mized during the call.
To display the menu again, touch .
Transferring the phone book
You can transfer the phone book entries from
your cellular phone to the phone book of the
navigation system.
pDepending on the cellular phone, the
phone book may be called Contacts, Busi-
ness Card or something else.
pWith some cellular phones, it may not be
possible to transfer the entire phone book
collectively. In this case, transfer addresses
one at a time from your phone book using
your cellular phone.
En 65
Chapter
10
Using hands-free phoning
Using hands-free phoning
pIf you connect a cellular phone featuring
an auto-synchronization function, the
phone book transfer or synchronization will
be automatically performed.
pA maximum of 1 000 entries can be trans-
ferred per cellular phone. If the entries ex-
ceed 1 000, the extra entries will not be
transferred.
pEach entry can hold up to 5 phone num-
bers.
If more than one number is registered for
one person, such as work place and home,
each number may be counted separately.
pDepending on the cellular phone that is
connected to this navigation system via
Bluetooth technology, this navigation sys-
tem may not be able to display the phone
book correctly. (Some characters may be
garbled.)
pIf the phone book in the cellular phone con-
tains image data, the phone book may not
be correctly transferred.
pThe transferred data cannot be edited on
the navigation system.
pDepending on the cellular phone, phone
book transfer may not be available.
1 Connect the cellular phone that has the
phone book to transfer.
=For details, refer to Connecting a registered
Bluetooth device manually on page 59.
2 Touch [Edit/Delete] on the “Phone”
screen.
The “Edit/Delete”screen appears.
=For details, refer to Displaying the phone
menu on page 61.
3 Touch [Contacts].
The “Contacts List”screen appears.
4 Touch [Import].
pIf some data has been already retrieved, se-
lect either [Overwrite]or[Additional].
!Overwrite:
The existing date is overwritten, and if
the telephone number is added to the
cellular phone, it will be transferred
anew.
!Additional:
If the telephone number is added to the
cellular phone, it will be transferred
anew.
When data transfer is finished, a message ask-
ing whether you want to transfer more data
appears.
5 Touch [No].
The transferred data is imported to the naviga-
tion system.
When the data has been successfully im-
ported, an import complete message is dis-
played and the “Contacts List”screen
appears.
pIt may take time depending on how many
entries are transferred.
#Touch [Yes] to continue the transfer.
Deleting registered contacts
1 Touch [Edit/Delete] on the “Phone”
screen.
The “Edit/Delete”screen appears.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Contacts].
The “Contacts List”screen appears.
3 Touch [Delete].
The “Delete”screen appears.
En
66
Chapter
10 Using hands-free phoning
4 Touch the entry you want to delete.
A check mark appears next to the entry.
#If you touch [All], you can select all entries. If
you want to deselect all entries, touch [None].
5 Touch [Delete].
A message confirming whether to delete the
entry appears.
6 Touch [Yes].
The entry is deleted.
#If you touch [No], the deletion is canceled.
Deleting the history information
You can clear the memory of each item that
corresponds to the connected cellular phone:
the outgoing call history, incoming call history
or missed call history information.
1 Touch [Edit/Delete] on the “Phone”
screen.
The “Edit/Delete”screen appears.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch the history item you want to de-
lete.
On this screen, you can select the following
items:
!Delete Dialed Calls:
Clears the dialed call history list.
!Delete Received Calls:
Clears the received call history list.
!Delete Missed Calls:
Clears the missed call history list.
3 Touch the history information you
want to delete.
The selected history information is check
marked and you can continue to select the his-
tory information.
#Touching [All] selects all history information.
Touching [None] deselects all selected history in-
formation.
4 Touch [Delete].
A confirmation message appears.
5 Touch [Yes].
Data on the selected item is cleared from this
navigation system’s memory.
#If you do not want to clear the memory that
you have selected, touch [No].
Changing the phone settings
Editing the device name
You can change the device name to be dis-
played on your cellular phone. (Default is
“PIONEER NAVI”.)
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Bluetooth Settings].
The “Bluetooth Settings”screen appears.
3 Touch [Device Name].
The keyboard to enter the name appears.
En 67
Chapter
10
Using hands-free phoning
Using hands-free phoning
4 Touch to delete the current name,
and enter the new name using the key-
board.
pUp to 16 characters can be entered for a de-
vice name.
5 Touch [OK].
The name is changed.
Editing the password
You can change the password to be used for
authentication on your cellular phone. (De-
fault is “1111”.)
pFour to eight characters can be entered for
a password.
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Bluetooth Settings].
The “Bluetooth Settings”screen appears.
3 Touch [Passkey].
The password setting screen appears.
4 Touch to delete the current pass-
word, and enter the new password using
the keyboard.
5 Touch [OK].
The password is changed.
Stopping Bluetooth wave
transmission
You can stop transmission of electric waves by
turning off the Bluetooth function. If you do
not use the Bluetooth wireless technology, we
recommend selecting “Off”.
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Bluetooth Settings].
The “Bluetooth Settings”screen appears.
3 Touch [Bluetooth On/Off].
Each touch of [Bluetooth On/Off] changes
the settings as follows:
!On (default):
Turns on the Bluetooth function.
!Off:
Turns off the Bluetooth function.
Answering a call automatically
The navigation system automatically answers
incoming calls to the cellular phone, so you
can answer calls while driving without taking
your hands off the steering wheel.
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Incoming Call Settings.].
The “Incoming Call Settings.”screen ap-
pears.
3 Touch [Auto Answer Preference].
The “Auto Answer Preference”screen ap-
pears.
4 Touch the desired option.
On this screen, you can select the following
items:
En
68
Chapter
10 Using hands-free phoning
!Off (default):
No automatic response. Respond manually.
!Immediately:
Answers immediately.
!After 3 seconds:
Answers after three seconds.
!After 6 seconds:
Answers after six seconds.
!After 10 seconds:
Answers after ten seconds.
Setting the automatic rejection
function
If this function is on, the navigation system
automatically rejects all incoming calls.
1 Display the “Phone”screen.
=For details, refer to Displaying the phone
menu on page 61.
2 Touch [Incoming Call Settings.].
The “Incoming Call Settings.”screen ap-
pears.
3 Touch [Refuse All Calls].
Each touch of [Refuse All Calls] changes the
settings as follows:
!Off (default):
Accepts all incoming calls.
!On:
Rejects all incoming calls.
pIf both “Refuse All Calls”and “Auto An-
swer Preference”are activated, “Refuse
All Calls”takes priority and all incoming
calls are automatically rejected.
pIf “Refuse All Calls”is set to “On”, rejected
incoming calls will not be stored in the
missed call list.
Notes for hands-free phoning
General notes
!Connection to all cellular phones featuring
Bluetooth wireless technology is not guar-
anteed.
!The line-of-sight distance between this na-
vigation system and your cellular phone
must be 10 meters or less when sending
and receiving voice and data via Bluetooth
technology. However, the actual transmis-
sion distance may be shorter than the esti-
mated distance, depending on the usage
environment.
!With some cellular phones, the ring sound
may not be output from the speakers.
!If private mode is selected on the cellular
phone, hands-free phoning may be dis-
abled.
Registration and connection
!Cellular phone operations vary depending
on the type of cellular phone. Refer to the
instruction manual that came with your cel-
lular phone for detailed instructions.
!With cellular phones, phone book transfer
may not work even though your phone is
paired with the navigation system. In that
case, disconnect your phone, perform pair-
ing again from your phone to the naviga-
tion system, and then perform the phone
book transfer.
Making and receiving calls
!You may hear a noise in the following situa-
tions:
—When you answer the phone using the
button on the phone.
—When the person on the other end of
line hangs up the phone.
!If the person on the other end of the phone
call cannot hear the conversation due to an
echo, decrease the volume level for hands-
free phoning. This may reduce the echo.
!With some cellular phones, even if you
press the accept button on the cellular
phone when a call comes in, hands-free
phoning may not be performed.
En 69
Chapter
10
Using hands-free phoning
Using hands-free phoning
!The registered name appears if the phone
number of the received call is already regis-
tered in the phone book. When one phone
number is registered under different
names, the name that comes first in the
phone book is displayed.
!If the phone number of the received call is
not registered in the phone book, the
phone number of the received call appears.
The received call and the dialed
number histories
!You cannot make a call to the entry of an
unknown user (no phone number) in the re-
ceived call history.
!If calls are made by operating your cellular
phone, no history data will be recorded in
the navigation system.
Phone book transfers
!If there are more than 1 000 phone book en-
tries on your cellular phone, not all entries
may download completely.
!With some cellular phones, it may not be
possible to transfer all items in the phone
book at one time. In this case, transfer
items one by one from your cellular phone.
!Depending on the cellular phone, this navi-
gation system may not display the phone
book correctly. (Some characters may be
garbled, or first and last names may be re-
versed.)
!If the phone book in the cellular phone con-
tains image data, the phone book may not
be transferred correctly. (Image data can-
not be transferred from the cellular phone.)
!Depending on the cellular phone, phone
book transfer may not be available.
En
70
Chapter
10 Using hands-free phoning
This chapter describes the basic operations of
the AV source.
You can play or use the following sources with
your Pioneer navigation system.
!Radio (FM, AM) (*1)
!HD Radio (HD Radio™tuner) (*2)
!CD
!ROM (in MP3, AAC, WMA)
!DVD-Video
!DivX
!SD
The following sources can be played back or
used by connecting an auxiliary device.
!USB
!iPod
!Pandora®
!Aha Radio
!Bluetooth audio
!SiriusXM™tuner
!AV input 1 (AV1)
!AV input 2 (AV2)
p(*1) A source available on AVIC-X850BT
and AVIC-X8510BT.
p(*2) A source available on AVIC-Z150BH
and AVIC-X950BH.
Displaying the AV
operation screen
%Press the MODE button when the map
screen is displayed.
pThe AV operation screen can also be dis-
played by touching [AV Source] on the
“Top Menu”.
Selecting a source
Source icons
%Touch the source icon you want to se-
lect on the left edge of the screen.
The operation screen of the selected source
appears.
pIf seven or more sources can be selected,
appears.
pIf you touch , the AV source icons will
be switched and hidden icons will ap-
pear.
Turning off the AV source
Turn off the AV source to stop playing or re-
ceiving the AV source.
%Touch [Off] on the left edge of the
screen.
The AV source is turned off.
En 71
Chapter
11
Basic operations of the AV source
Basic operations of the AV source
AV source plate display
If you select a station or song with the track
up/down button while the map screen is still
displayed, the AV source plate appears on the
top of the map screen. The AV source plate
displays the status of the currently played AV
source. The AV source plate disappears if it is
not operated for about four seconds after it ap-
pears.
AV source plate
En
72
Chapter
11 Basic operations of the AV source
pThis function is available on AVIC-X850BT
and AVIC-X8510BT.
You can listen to the radio using the naviga-
tion system. This section describes operations
for radio.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Touch [Radio] on the left edge of the
screen to display the “Radio”screen.
3 Touch the band indicator to switch a
band.
=For details, refer to Using the touch panel
keys on page 73.
4 Use the touch panel keys on the screen
to control the radio.
=For details, refer to Using the touch panel
keys on page 73.
Reading the screen
1
78 6
423
5
1Source icon
Shows which source has been selected.
2Program service name indicator
Shows the program service name (station
name) of the current station.
pWhen “AM”is selected, this indicator is
not shown.
3Current time
4Band indicator
Shows which band the radio is tuned to: FM1,
FM2, FM3 or AM.
5Preset number indicator
Shows the selected preset item
6Frequency indicator
7Signal level indicator
8STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
pWhen “AM”is selected, this indicator is
not shown.
Using the touch panel keys
23
8
67 5
1
4
1Selects a band
Touch the left part to select a FM band (FM1,
FM2 or FM3). Touch the right part to switch to
the AM band.
pWhen “AM”is selected, you cannot
switch to another AM band by touching
the band key.
2Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
3Displays the “Function”menu
=For details, refer to Using advanced func-
tions on page 75.
4Operates some functions by swipe action
=For details, refer to Swipe action on page
25.
5Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
En 73
Chapter
12
Using the radio
Using the radio
6Stores the strongest broadcast frequen-
cies
=For details, refer to Storing the strongest
broadcast frequencies on page 74.
7Performs manual tuning
To tune manually, touch or briefly. The
frequencies move up or down one step at a
time.
Performs seek tuning
To perform seek tuning, touch and hold or
for about one second and then release.
The tuner will scan frequencies until it finds a
broadcast strong enough for good reception.
pYou can cancel seek tuning by touching
either or briefly.
pIf you keep holding or , you can
skip broadcasting frequencies. Seek
tuning will start when you release the
keys.
8Displays preset channels
Touching this key displays the preset channel
list.
Touch the item of the list (“1”to “6”) to switch
to a channel registered as a preset channel.
pIf you touch the preset channel list dis-
play key while the preset channel list is
displayed, the list disappears and preset
tuning keys are displayed.
Preset channel list display key
Preset tuning keys
!Once you have stored broadcast chan-
nels, you can easily recall preset chan-
nels from memory with a single touch of
a key.
=For details, refer to Storing and recal-
ling broadcast frequencies on page
74.
Storing and recalling broadcast
frequencies
With a touch of any of the preset tuning keys
(“1”to “6”), you can easily store up to six
broadcast frequencies for later recall (also
with the touch of a key).
1 Select a frequency that you want to
store in memory.
2 Display the preset channel list.
=For details, refer to Displays preset chan-
nels on page 74.
3 Keep touching a preset tuning key [1]
to [6].
The selected radio station has been stored in
memory.
The next time you touch the same preset tun-
ing key “1”to “6”, the radio station frequencies
are recalled from memory.
pUp to 18 FM stations, six for each of the
three FM bands, as well as six AM stations,
can be stored in memory.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under the preset tuning keys “1”to
“6”and, once stored there, you can tune into
them with the touch of a key.
pStoring broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.
pPreviously stored broadcast frequencies
may remain stored if the number of strong
broadcast frequencies stored has not
reached the limit.
En
74
Chapter
12 Using the radio
%Touch [BSM] to begin a search.
A message appears. While the message is dis-
playing, the six strongest broadcast frequen-
cies will be stored under the preset tuning
keys “1”to “6”in order of their signal strength.
When this is complete, the message disap-
pears.
#If you touch [Cancel], the storage process is
canceled.
Using advanced functions
Tuning in strong frequencies
Local seek tuning allows you to only tune into
those radio stations with sufficiently strong
signals for good reception.
1 Touch on the “Radio”screen.
The “Function”menu appears.
2 Touch [Local].
3 Touch [On] to turn local seek tuning on.
#If you touch [Off], local seek tuning is turned
off.
4 Touch or to set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1—2—3—4
AM: 1—2
pThe FM “4”(AM “2”) setting allows recep-
tion of only the strongest stations, while
lower settings let you receive weaker
stations.
Operating by hardware
buttons
Pressing the TRK button
You can move the preset channels up or down.
Pressing and holding the TRK button
You can perform seek tuning.
En 75
Chapter
12
Using the radio
Using the radio
pThis function is available on AVIC-Z150BH
and AVIC-X950BH.
You can listen to the radio by using the naviga-
tion system. This section describes operations
for HD Radio reception.
HD Radio stations
HD Radio stations offer high quality audio and
data services. HD Radio stations are brought
to you by your local FM or AM stations.
HD Radio stations feature the following:
!High quality audio
!FM multicasting
!Data service
: Sub channel
AM band
Analog AM
Analog AM Digital AM
FM band
Analog FM
Analog FM Digital FM
Analog FM Digital FM-1ch
Digital FM-2ch
Digital FM-3ch
: Main channel
Digital, CD-quality sound. HD Radio Technology enables
local radio stations to broadcast a clean digital signal.
AM sounds like today’s FM and FM sounds like a CD.
Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song
name, artist, station IDs, HD2/HD3 Channel Guide, and
other relevant data streams.
Adjacent to traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, origi-
nal music as well as deep cuts into traditional genre.
iTunes®Tagging provides you the opportunity to discover
a wide range of content and the means to “tag”that con-
tent for later review and purchase from the iTunes®
Store.
Visual information related to content being played on
your HD Radio receiver, such as Album Art, historical
photographs, still art from live broadcasts, among other
related content.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Touch [Digital Radio] on the left edge
of the screen to display the “Digital Radio”
screen.
3 Use the touch panel keys on the screen
to control the radio.
=For details, refer to Using the touch panel
keys on page 77.
Reading the screen
1
7
cde b 89
45623
a
1Source icon
Shows which source has been selected.
En
76
Chapter
13 HD Radio™reception
2Multicasting indicator
Shows the number of multicast channels in
the current frequency.
3Current time
4Band indicator
Shows which band the radio is tuned to: FM1,
FM2, FM3 or AM.
5Song info reception indicator
Shows the reception status of the song infor-
mation.
Indicator Meaning
Appears when the navigation system
receives song information and can
store it.
The icon is displayed on the opera-
tion screen of the HD Radio receiver.
Appears when the navigation system
is storing song information.
The icon is displayed on all operation
screens of AV sources.
6Song info status indicator
Shows the status of the song information
stored in the navigation system.
Indicator Meaning
Displays the number of song infor-
mation items stored in the naviga-
tion system.
The icon is displayed on all operation
screens of AV sources.
Appears when the song information
is transferred to an iPod.
The icon is displayed on all operation
screens of AV sources.
7Album artwork
Shows the album artwork of the current song
if it is available.
pIf the album artwork cannot be ac-
quired, the station logo is displayed. If
the station logo cannot be acquired
either, the preinstalled image is dis-
played.
8Signal type indicator
Shows the type of signal currently being re-
ceived. If a digital broadcasting is received,
“Digital”appears. Otherwise, “Analog”ap-
pears.
9Blending mode indicator
=For details, refer to Switching the recep-
tion mode on page 80.
aPreset number indicator
Shows the selected preset item
bFrequency indicator
cSignal level indicator
dSeek type indicator
=For details, refer to Switching the seek
mode on page 80.
eDetailed information
!:Call sign, program service or fre-
quency
Shows the call sign, the program ser-
vice or the frequency of the broadcast
station currently being received.
!:Song title (program name)
Shows the title of the current song (pro-
gram).
!:Artist (performer) name
Shows the artist (performer) name cur-
rently playing (when available).
!:Album title
Shows the title of the album of the cur-
rent track (when available).
Using the touch panel keys
1234
a
789 6
5
1Selects a band
Touch the left part to select a FM band (FM1,
FM2 or FM3). Touch the right part to switch to
the AM band.
pWhen “AM”is selected, you cannot
switch to another AM band by touching
the band key.
En 77
Chapter
13
HD Radio™reception
HD Radio™reception
2Scrolls the text
If not all the characters can be displayed with-
in the displayed area, touching the key to the
right of the item allows you to see the remain-
ing characters.
3Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
4Displays the “Function”menu
=For details, refer to Using advanced func-
tions on page 80.
5Operates some functions by swipe action
=For details, refer to Swipe action on page
25.
6Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
7Stores song information to an iPod
Touch this key when receiving the song infor-
mation of the song on air, and you can store
the song information on your iPod.
=For details, refer to Storing song informa-
tion to an iPod (iTunes Tagging) on page
79.
8Stores the strongest broadcast frequen-
cies
=For details, refer to Storing the strongest
broadcast frequencies on page 79.
9Performs manual tuning
To tune manually, touch or briefly. The
frequencies move up or down one step at a
time.
Performs seek tuning
To perform seek tuning, touch and hold or
for about one second and then release.
The tuner will scan frequencies until it finds a
broadcast strong enough for good reception.
pYou can cancel seek tuning by touching
either or briefly.
pWhen an analog station is received, only
analog broadcasts can be tuned up or
down.
If a digital broadcast is not yet received,
tuning up or down seeks the next or pre-
vious analog station.
Analog FM
Analog FM
Analog FM Digital FM-1ch
Digital FM-2ch
Digital FM-3ch
aDisplays preset channels
Touching this key displays the preset channel
list.
Touch the item of the list (“1”to “6”) to switch
to a channel registered as a preset channel.
pIf you touch the preset channel list dis-
play key while the preset channel list is
displayed, the list disappears and preset
tuning keys are displayed.
Preset channel list display key
Preset tuning keys
!Once you have stored broadcast chan-
nels, you can easily recall preset chan-
nels from memory with a single touch of
a key.
=For details, refer to Storing and recal-
ling broadcast frequencies on page
79.
En
78
Chapter
13 HD Radio™reception
Storing and recalling broadcast
frequencies
With a touch of any of the preset tuning keys
(“1”to “6”), you can easily store up to six
broadcast frequencies for later recall (also
with the touch of a key).
1 Select a frequency that you want to
store in memory.
2 Display the preset channel list.
=For details, refer to Displays preset chan-
nels on page 78.
3 Touch and hold a preset tuning keys
([1] to [6]).
The selected radio station has been stored in
memory.
The next time you touch the same preset tun-
ing key “1”to “6”, the radio station frequencies
are recalled from memory.
pUp to 18 FM stations, six for each of the
three FM bands, as well as six AM stations,
can be stored in memory.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies and assign them to the preset
tuning keys “1”to “6”. Once stored, you can
tune in to these frequencies with the touch of
a key.
pStoring broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.
pPreviously stored broadcast frequencies
may remain stored if the number of strong
broadcast frequencies stored has not
reached the limit.
%Touch [BSM] to begin a search.
Six strongest broadcast frequencies will be
stored under the preset tuning keys “1”to “6”
in order of their signal strength.
#If you touch [Cancel], the storage process is
canceled.
Storing song information
to an iPod (iTunes Tagging)
You can store the song information to the
iPod, when the navigation system has received
the song information. The songs will show up
in a playlist called “Tagged playlist”in iTunes
next time you synchronize your iPod. You can
directly buy the songs via the navigation sys-
tem.
Depending on when the song information is
stored, information for the previous song or
the song after the current song may also be
stored. Be sure to confirm the song before you
purchase it.
pThe iTunes Tagging function is available
while digital broadcasts are being received.
pThis function is provided on the following
iPod models:
!iPod touch 5th generation
!iPod touch 4th generation
!iPod touch 3rd generation
!iPod touch 2nd generation
!iPod touch 1st generation
!iPod classic
!iPod nano 6th generation
!iPod nano 5th generation
!iPod nano 4th generation
!iPod nano 3rd generation
!iPhone 5
!iPhone 4S
!iPhone 4
!iPhone 3GS
!iPhone 3G
!iPhone
pThe version of iTunes must be 7.4 or higher.
1 Tune into the digital broadcast station.
When song information is received, is dis-
played while the desired song is being broad-
cast, and becomes active.
=For details, refer to Song info reception in-
dicator on page 77.
2 Touch .
Information on the song on air is stored in the
navigation system.
While the information is being acquired,
is displayed.
En 79
Chapter
13
HD Radio™reception
HD Radio™reception
When it is complete, turns off and
is displayed.
pThe song information for up to 50 songs
can be stored on this navigation system.
Depending on when the song information
is stored, information for the previous song
or the song after the current song may also
be stored.
3 Connect your iPod.
The song information is transferred to your
iPod.
pIf the iPod is already connected, every time
you touch , the song information will be
transferred to your iPod.
When the song information is stored on
your iPod, disappears.
pWhen transfer of song information is com-
pleted, the information stored in the naviga-
tion system will be automatically deleted.
pIf you turn off the navigation system or dis-
connect the iPod while transferring song in-
formation, the transfer may not
successfully complete.
p
While the navigation system is storing song in-
formation, transfer to iPod is not possible.
Using advanced functions
Tuning in strong frequencies
Local seek tuning allows you to only tune into
those radio stations with sufficiently strong
signals for good reception.
1 Touch on the “Digital Radio”screen.
2 Touch [Local].
3 Touch [On] to turn local seek tuning on.
#If you touch [Off], local seek tuning is turned
off.
4 Touch or to set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1—2—3—4
AM: 1—2
p
The FM “4”(AM “2”) setting allows reception
of only the strongest stations, while lower
settings let you receive weaker stations.
Switching the seek mode
You can select the method of seek tuning.
1 Touch on the “Digital Radio”screen.
2 Touch [Seek].
3 Touch [All] or [HD].
!All (default):
Seeks stations from both analog and digital
broadcasting.
!HD:
Seeks only from digital broadcasting.
pIf you select “HD”while [Blending] is set to
“Analog”, the setting on [Blending] turns
to “D/A Auto”automatically.
Switching the reception mode
If reception of a digital broadcast becomes
poor, the tuner automatically switches to the
analog broadcast of the same frequency level
by default. If you want to avoid frequent auto-
matic switching, change this setting to [Ana-
log].
1 Touch on the “Digital Radio”screen.
2 Touch [Blending].
3 Touch [Analog] or [D/A Auto].
!D/A Auto (default):
Automatically switches to the analog broad-
cast of the same frequency level as the digi-
tal broadcast.
!Analog:
Receives analog broadcasting only.
pIf you select “Analog”on this setting while
[Seek] is set to “HD”, the setting on [Seek]
turns to “All”automatically.
Operating by hardware
buttons
Pressing the TRK button
You can move the preset channels up or down.
Pressing and holding the TRK button
You can perform seek tuning.
En
80
Chapter
13 HD Radio™reception
You can play a normal music CD using the
built-in drive of the navigation system. This
section describes how.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Insert the disc you want to play into
the disc-loading slot.
Playback starts from the first track of the CD.
=For details, refer to Inserting and ejecting a
disc on page 15.
pIf the disc is already set, touch [Disc] on the
left edge of the screen.
=For details, refer to Selecting a source on
page 71.
3 Use the touch panel keys on the screen
to control the disc.
=For details, refer to Using the touch panel
keys on page 82.
Reading the screen
1
32 4
5
1Source icon
Shows which source has been selected.
2Track number indicator
Shows the number of the track currently play-
ing.
3Current time
4Current track information
!:Track title
Shows the title of the track currently
playing (when available).
!:Artist name
Shows the artist name of the track cur-
rently playing (when available).
!:Album title
Shows the title of the album of the cur-
rent track (when available).
!Play time
Shows the elapsed playing time within
the current track.
p“-------”is displayed if there is no corre-
sponding information.
5Playback condition indicator
Indicates the current playback condition.
Playing tracks in random order
Indicator Meaning
Does not play tracks in random
order.
Plays all tracks in the current disc in
random order.
Setting a repeat play range
Indicator Meaning
Repeats the current disc.
Repeats just the current track.
En 81
Chapter
14
Playing audio CDs
Playing audio CDs
Using the touch panel keys
12
4
3
67 5
1Selects a track from the list
Touching the key displays a list which lets you
see the track titles on a disc. You can play a
track on the list by touching it.
p“-------”is displayed if there is no corre-
sponding information.
2Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
3Operates some functions by swipe action
=For details, refer to Swipe action on page
25.
4Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
pIf you perform track search or fast for-
ward or reverse, track repeat playback is
automatically canceled.
=For details, refer to Playback condition
indicator on page 81.
5Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
6Plays tracks in random order
All tracks in the disc can be played at random
by only touching a single key.
pIf you turn the random play on when the
repeat play range is set to , the repeat
play range changes to automatically.
=For details, refer to Playback condition
indicator on page 81.
7Playback and Pause
Touching [d]or[e] switches between play-
back and pause.
Operating by hardware
buttons
Pressing the TRK button
You can skip tracks forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
En
82
Chapter
14 Playing audio CDs
You can play a disc that contains compressed
audio files using the built-in drive of the navi-
gation system. This section describes these
operations.
pIn the following description, the MP3,
WMA, AAC files are collectively referred to
as “Compressed audio files”.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Insert the disc you want to play into
the disc-loading slot.
Playback starts from the first file of the ROM.
=For details, refer to Inserting and ejecting a
disc on page 15.
pIf the disc is already set, touch [Disc] on the
left edge of the screen.
=For details, refer to Selecting a source on
page 71.
3 Use the touch panel keys on the screen
to control the disc.
=For details concerning operations, refer to
Using the touch panel keys on page 84.
Reading the screen
1
3425
6
1Source icon
Shows which source has been selected.
2Track number indicator
Shows the number of the track currently play-
ing.
3Current time
4File type indicator
Shows the type of audio files.
5Current file information
!:Track title
Shows the title of the track currently
playing (when available).
pIf the title of a track is not available,
the file name appears.
!:Artist name
Shows the artist name currently playing
(when available).
!:Folder name/Album title
Shows the title of the album of the cur-
rent file when MP3 or AAC data have in-
formation. Otherwise, shows the folder
name currently paying.
!Play time
Shows the elapsed playing time within
the current file.
p“-------”is displayed if there is no corre-
sponding information.
6Playback condition indicator
Indicates the current playback condition.
Playing files in random order
Indicator Meaning
Does not play files in random order.
Plays all audio files in the current re-
peat play range in random order.
Setting a repeat play range
Indicator Meaning
Repeats all compressed audio files.
Repeats just the current file.
Repeats the current folder.
En 83
Chapter
15
Playing music files on ROM
Playing music files on ROM
Using the touch panel keys
12
4
67 5
3
1Selects a file from the list
Touching the key displays a list which lets you
see the track titles or folder names on a disc.
pIf the title of a track is not available, the
file name appears.
Touching a folder on the list shows its content.
You can play a file on the list by touching it.
2Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
3Operates some functions by swipe action
=For details, refer to Swipe action on page
25.
4Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
pIf you select another folder during re-
peat play, the repeat play range changes
to .
pIf you perform fast reverse or fast for-
ward during , the repeat play range
changes to .
pWhen is selected, it is not possible
to playback a subfolder of that folder.
=For details, refer to Playback condition
indicator on page 83.
5Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
6Plays files in random order
The files in the current repeat play range can
be played at random by only touching a single
key.
pIf you turn the random play on when the
repeat play range is set to , the repeat
play range changes to automati-
cally.
=For details, refer to Playback condition
indicator on page 83.
7Playback and Pause
Touching [d]or[e] switches between play-
back and pause.
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
En
84
Chapter
15 Playing music files on ROM
You can play a DVD-Video using the built-in
drive of the navigation system. This section de-
scribes operations for playing a DVD-Video.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Insert the disc you want to play into
the disc-loading slot.
The source changes and then playback will
start.
=For details, refer to Inserting and ejecting a
disc on page 15.
pIf the disc is already set, touch [Disc] on the
left edge of the screen.
=For details, refer to Selecting a source on
page 71.
3 Use the touch panel keys on the screen
to control the disc.
=For details, refer to Using the touch panel
keys on page 86.
Reading the screen
1
3425
7
6
8
1Source icon
Shows which source has been selected.
2Current time
3Title number indicator
Shows the title number currently playing.
4Chapter number indicator
Shows the chapter number currently playing.
5Play time indicator
Shows the elapsed playing time within the
current title.
6Digital sound format indicator
Shows which digital sound format (surround
sound format) has been selected.
7Audio channel indicator
Shows the current audio channel type, such
as “Mch”(Multi-channel).
8Repeat range indicator
Shows which repeat range has been selected.
Setting a repeat play range
Indicator Meaning
Plays the whole of the current disc.
Repeats just the current chapter.
Repeats just the current title.
En 85
Chapter
16
Playing a DVD-Video
Playing a DVD-Video
Using the touch panel keys
Playback screen (page 1)
12 3
5
79cdba 8 6
4
Playback screen (page 2)
feghij
4
pWith some discs, the icon 9may be dis-
played, meaning that the operation is inva-
lid.
1Searches for a desired scene and starts
playback from a specified time
=For details, refer to Searching for a speci-
fic scene and starting playback from a
specified time on page 87.
2Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
3Hides the touch panel keys and informa-
tion of the current video
Touching shows only the current video.
pIf you want to display the touch panel
keys and information of the current
video again, touch anywhere on the LCD
screen.
4Operates some functions by swipe action
pWhen the video is displayed in full
screen mode, the whole screen be-
comes a swipe response area.
=For details, refer to Swipe action on page
25.
5Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
pIf you perform chapter (title) search, fast
forward, fast reverse or slow motion
playback, the repeat play range changes
to .
pThis function is not available when disc
playback has been stopped.
=For details, refer to Repeat range indi-
cator on page 85.
6Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
7Displays the DVD menu keypad
=For details, refer to Using the DVD menu
by touch panel keys on page 88.
8Performs an operation (such as resuming)
that is stored on the disc
When using a DVD that has a point recorded
that indicates where to return to, the DVD re-
turns to the specified point and begins play-
back from there.
9Displays the DVD menu
You can display the menu by touching [Menu]
or [Top Menu] while a disc is playing. Touch-
ing either of these keys again lets you start
playback from the location selected from the
menu. For details, refer to the instructions pro-
vided with the disc.
aFrame-by-frame playback (or slow-motion
playback)
=For details, refer to Frame-by-frame play-
back on page 88.
=For details, refer to Slow motion playback
on page 89.
bStops playback
cPlayback and Pause
Touching [d]or[e] switches between play-
back and pause.
dSwitches to the next page of touch panel
keys
eResumes playback (Bookmark)
=For details, refer to Resuming playback
(Bookmark) on page 87.
En
86
Chapter
16 Playing a DVD-Video
fChanging the wide screen mode
=For details, refer to Changing the wide
screen mode on page 89.
gSwitches the audio language
You can switch the audio language while the
disc is playing when a disc has multilingual
data (multi-audio).
pEach time you touch this key changes
the audio language.
=For details, refer to Setting the top-prior-
ity languages on page 94.
hSwitches the subtitle language
You can switch the subtitle language while the
disc is playing when a disc has multilingual
data (multi-subtitle).
pEach time you touch this key changes
the subtitle language.
=For details, refer to Setting the top-prior-
ity languages on page 94.
iSelects audio output
When playing DVDs recorded with LPCM
audio, you can switch the audio output. Touch
repeatedly until the desired audio output
appears on the display.
Each touch of changes the settings as fol-
lows:
!L+R: Left and right
!L: Left
!R: Right
!Mix: Mixing left and right
pThis function is not available when disc
playback has been stopped.
pThe appearance of this key changes ac-
cording to the current setting.
jChanges the viewing angle (Multi-angle)
Each touch of switches between viewing
angles.
pDuring playback of a scene shot from
multiple angles, the angle icon is
displayed. Turn the angle icon display
on or off using the “DVD/DivX® Setup”
menu.
pThe appearance of this key changes ac-
cording to the current setting.
=For details, refer to Setting the angle icon
display on page 94.
Resuming playback (Bookmark)
The Bookmark function lets you resume play-
back from a selected scene the next time the
disc is loaded.
%Touch on the “DVD-V”screen.
You can bookmark one point for each of up to
five discs. If you try to memorize another point
for the same disc, the older bookmark will be
overwritten by the newer one.
pTo clear the bookmark on a disc, touch and
hold .
Searching for a specific scene
and starting playback from a
specified time
You can search for the scene you want by spe-
cifying a title or chapter, and the time.
pChapter search and time search are not
available when disc playback has been
stopped.
1 Touch and then touch [Title] (title),
[Chapter] (chapter), [Time] (time).
2 Touch the keys to input the target num-
ber or time and then touch [Enter].
For titles, chapters
!To select 3, touch [3] and [Enter] in order.
!To select 10, touch [1] and [0] and [Enter]in
order.
For time (time search)
!To select 5 minutes 3 seconds, touch [5],
[min], [3], [sec] and [Enter] in order.
!To select 71 minutes 00 seconds, touch [7],
[1], [min] and [Enter] in order.
En 87
Chapter
16
Playing a DVD-Video
Playing a DVD-Video
!To select 100 minutes 05 seconds, touch
[1], [0], [0], [5], [sec] and [Enter] in order.
pTo cancel an input number, touch .
To cancel the input numbers, touch and
hold .
Direct number search
You can use this function when you need to
enter a numerical command during DVD play-
back.
1 Touch .
2 Touch [10Key].
3 Touch [0] to [9] to input the desired
number.
4 While the input number is displayed,
touch [Enter].
Operating the DVD menu
You can operate the DVD menu by touching
the menu item on the screen directly.
pThis function can be used when the
key is displayed on the upper left corner of
the LCD screen.
pThis function may not work properly with
some DVD disc content. In that case, use
touch panel keys to operate the DVD menu.
pIf you touch the screen while is dis-
played, the touch panel keys will not be dis-
played.
1 Touch the screen to display the touch
panel keys.
2 Touch [Top Menu] or [Menu] to display
the touch panel keys to operate the DVD
menu.
3 Touch the desired menu item.
#If you touch , the touch panel keys for se-
lecting the menu item are displayed.
Using the DVD menu by touch
panel keys
If items on the DVD menu appear, the touch
panel keys may overlay them. If so, select an
item using those touch panel keys.
1 Touch , , or to select the de-
sired menu item.
pIf the touch panel keys for DVD menu selec-
tion disappear, touch anywhere on the
screen, and then touch . The touch
panel keys are displayed again.
2 Touch [OK].
Playback starts from the selected menu item.
The way to display the menu differs depending
on the disc.
#If you touch or , the display position of
touch panel keys is changed each time you touch
it.
#If you touch [Hide], the touch panel keys dis-
appear and the icon is displayed. You can se-
lect a menu item by touching it.
Frame-by-frame playback
This lets you move ahead one frame at a time
during pause.
%Touch [r] during pause.
Each time you touch [r], you move ahead
one frame.
pTo return to normal playback, touch [d]or
[e].
pWith some discs, images may be unclear
during frame-by-frame playback.
En
88
Chapter
16 Playing a DVD-Video
Slow motion playback
This lets you slow down playback speed.
1 Touch and hold [r] until is dis-
played during playback.
The icon is displayed, and forward slow
motion playback begins.
pTo return to normal playback, touch [d]or
[e].
2 Touch [r] to adjust playback speed
during slow motion playback.
Each time you touch [r] it changes the
speed in four steps in the following order:
1/16 d1/8 d1/4 d1/2
pThere is no sound during slow motion play-
back.
pWith some discs, images may be unclear
during slow motion playback.
pReversed slow motion playback is not possi-
ble.
Changing the wide screen mode
You can set the screen size of video.
pThe default setting is “Full”.
1 Touch on the “DVD-V”screen.
pThe appearance of this key changes accord-
ing to the current setting.
2 Touch the desired mode.
!Full
A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any
omissions.
!Just
The picture is enlarged slightly at the center
and the amount of enlargement increases
horizontally toward the ends of the picture,
enabling you to enjoy a 4:3 picture without
sensing any disparity, even on a wide
screen.
!Cinema
A picture is enlarged by the same propor-
tion as “Full”or “Zoom”in the horizontal di-
rection and by an intermediate proportion
between “Full”and “Zoom”in the vertical
direction; ideal for a cinema-sized (wide
screen) picture where captions lie outside
the frame.
!Zoom
A 4:3 picture is enlarged in the same pro-
portion both vertically and horizontally;
ideal for a cinema-sized (wide screen) pic-
ture.
!Normal
A 4:3 picture is displayed normally, giving
you no sense of disparity since its propor-
tions are the same as those of the normal
picture.
pImages may be unclear when “Cinema”or
“Zoom”is selected.
pRemember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author’s
rights protected by the Copyright Law.
Operating by hardware
buttons
Pressing the TRK button
You can skip chapters forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
En 89
Chapter
16
Playing a DVD-Video
Playing a DVD-Video
You can play a DivX disc using the built-in
drive of the navigation system. This section de-
scribes those operations.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Insert the disc you want to play into
the disc-loading slot.
The source changes and then playback will
start.
=For details, refer to Inserting and ejecting a
disc on page 15.
pIf the disc is already set, touch [Disc] on the
left edge of the screen.
=For details, refer to Selecting a source on
page 71.
3 Use the touch panel keys on the screen
to control the disc.
=For details, refer to Using the touch panel
keys on page 90.
Reading the screen
1
34256
8
7
9
a
1Source icon
Shows which source has been selected.
2Current time
3File number indicator
Shows the file number currently playing.
4Folder number indicator
Shows the folder number currently playing.
5Current file name indicator
Shows the file name currently playing.
6Current folder name indicator
Shows the folder name currently playing.
7Digital sound format indicator
Shows the digital sound format (surround
sound format) currently selected.
8Audio channel indicator
Shows the current audio channel type, such
as “Mch”(Multi-channel).
9Repeat range indicator
Shows which repeat range has been selected.
Setting a repeat play range
Indicator Meaning
Plays the whole of the current disc.
Repeats just the current file.
Repeats just the current folder.
aPlay time indicator
Shows the elapsed playing time within the
current file.
Using the touch panel keys
Playback screen
12 3
5
7adcb 89 6
4
pWith some discs, the icon 9may be dis-
played, meaning that the operation is inva-
lid.
1Selects a file from the list
Touching the key displays the list which lets
you find file names or folder names on a disc.
En
90
Chapter
17 Playing a DivX video
pA dash (–) is displayed if there is no cor-
responding information.
Touching a folder on the list shows its content.
You can play a file on the list by touching it.
The contents of the folder in which the cur-
rently playing file is located are displayed.
2Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
3Hides the touch panel keys and informa-
tion of the current video
Touching shows only the current video.
pIf you want to display the touch panel
keys and information of the current
video again, touch anywhere on the LCD
screen.
4Operates some functions by swipe action
pWhen the video is displayed in full
screen mode, the whole screen be-
comes a swipe response area.
=For details, refer to Swipe action on page
25.
5Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
pIf you select another folder during re-
peat play, the repeat play range changes
to .
pIf you perform fast reverse or fast for-
ward during , the repeat play range
changes to .
pWhen is selected, it is not possible
to playback a subfolder of that folder.
=For details, refer to Repeat range indi-
cator on page 90.
6Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
7Searches for a desired scene and starts
playback from a specified time
=For details, refer to Starting playback
from a specified time on page 92.
8Switches the subtitle language
You can switch the subtitle language while the
disc is playing when a disc has multilingual
data (multi-subtitle).
pEach time you touch this key changes
the subtitle language.
=For details, refer to Setting the top-prior-
ity languages on page 94.
9Switches the audio language
You can switch the audio language while the
disc is playing when a disc has multilingual
data (multi-audio).
pEach time you touch this key changes
the audio language.
=For details, refer to Setting the top-prior-
ity languages on page 94.
aChanging the wide screen mode
=For details, refer to Changing the wide
screen mode on page 92.
bFrame-by-frame playback (or slow-motion
playback)
=For details, refer to Frame-by-frame play-
back on page 91.
=For details, refer to Slow motion playback
on page 92.
cStops playback
dPlayback and Pause
Touching [d]or[e] switches between play-
back and pause.
Frame-by-frame playback
This lets you move ahead one frame at a time
during pause.
%Touch [r] during pause.
Each time you touch [r], you move ahead
one frame.
pTo return to normal playback, touch [d]or
[e].
pWith some discs, images may be unclear
during frame-by-frame playback.
En 91
Chapter
17
Playing a DivX video
Playing a DivX video
Slow motion playback
This lets you slow down playback speed.
%Touch and hold [r] until is dis-
played during playback.
The icon is displayed, and forward slow
motion playback begins.
pTo return to normal playback, touch [d].
pThere is no sound during slow motion play-
back.
pWith some discs, images may be unclear
during slow motion playback.
pReversed slow motion playback is not possi-
ble.
Starting playback from a
specified time
You can search for a desired scene by specify-
ing the time.
pTime search is impossible when disc play-
back has been stopped.
1 Touch .
2 Touch the keys to input the target num-
ber or time and then touch [Enter].
!To select 5 minutes 3 seconds, touch [5],
[min], [3], [sec] and [Enter] in order.
!To select 71 minutes 00 seconds, touch [7],
[1], [min] and [Enter] in order.
!To select 100 minutes 05 seconds, touch
[1], [0], [0], [5], [sec] and [Enter] in order.
pTo cancel an input number, touch .
To cancel the input numbers, touch and
hold .
Changing the wide screen mode
You can set the screen size of video.
pThe default setting is “Full”.
1 Touch on the “DivX”screen.
pThe appearance of this key changes accord-
ing to the current setting.
2 Touch the desired mode.
!Full
A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any
omissions.
!Just
The picture is enlarged slightly at the center
and the amount of enlargement increases
horizontally toward the ends of the picture,
enabling you to enjoy a 4:3 picture without
sensing any disparity, even on a wide
screen.
!Cinema
A picture is enlarged by the same propor-
tion as “Full”or “Zoom”in the horizontal di-
rection and by an intermediate proportion
between “Full”and “Zoom”in the vertical
direction; ideal for a cinema-sized (wide
screen) picture where captions lie outside
the frame.
!Zoom
A 4:3 picture is enlarged in the same pro-
portion both vertically and horizontally;
ideal for a cinema-sized (wide screen) pic-
ture.
!Normal
A 4:3 picture is displayed normally, giving
you no sense of disparity since its propor-
tions are the same as those of the normal
picture.
En
92
Chapter
17 Playing a DivX video
pImages may be unclear when “Cinema”or
“Zoom”is selected.
pRemember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author’s
rights protected by the Copyright Law.
Playing DivX®VOD content
Some DivX VOD (video on demand) content
may only be playable a fixed number of times.
When you load a disc containing this type of
DivX VOD content, the remaining number of
plays is shown on-screen and you then have
the option of playing the disc (thereby using
up one of the remaining plays), or stopping. If
you load a disc that contains expired DivX
VOD content (for example, content that has
zero remaining plays), “This DivX rental has
expired.”is displayed.
pIf your DivX VOD content allows an unlim-
ited number of plays, then you may load
the disc into your player and play the con-
tent as often as you like, and no message
will be displayed.
pIn order to play DivX VOD content on this
unit, you first need to register the unit with
your DivX VOD content provider. For infor-
mation about your registration code, refer
to Displaying your DivX VOD registration
code on page 149.
pDivX VOD content is protected by a DRM
(Digital Rights Management) system. This
restricts playback of content to specific, re-
gistered devices.
%If the message is displayed after load-
ing a disc containing DivX VOD content,
touch [d].
Playback of the DivX VOD content will start.
pTouch [o]or[p] to switch between
files.
pIf you do not want to play the DivX VOD con-
tent, touch [g].
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
En 93
Chapter
17
Playing a DivX video
Playing a DivX video
This chapter describes how to configure the
DVD-Video/DivX playback.
Displaying DVD/DivX®
Setup menu
1 Press the HOME button to display the
“Top Menu”screen.
2 Touch .
The “Edit/Settings”screen appears.
3 Touch [Source Settings].
The “Setting according to source”screen ap-
pears.
4 Touch [DVD/DivX® Setup].
The “DVD/DivX® Setup”screen appears.
5 Touch the item you want to configure.
Setting the top-priority
languages
You can assign the top-priority language to the
top-priority subtitle, audio and menu in initial
playback. If the selected language is recorded
on the disc, subtitles, audio and menu are dis-
played or output in that language.
1 Display the “DVD/DivX® Setup”screen.
=For details, refer to Displaying DVD/DivX®
Setup menu on page 94.
2 Touch [Subtitle Language], [Audio Lan-
guage] or [Menu Language].
Each language menu is displayed and the cur-
rently set language is selected.
3 Touch the desired language.
When you select “Others”, a language code
input display is shown. Input the four-digit
code of the desired language then touch [OK].
=For details, refer to Language code chart for
DVDs on page 97.
pIf the selected language is not recorded on
the disc, the default language specified on
the disc is output and displayed.
pYou can also switch the subtitle and audio
language by touching or during
playback.
Even if you touch or to switch the
subtitle or audio language, this setting will
not change.
Setting the angle icon display
You can set the angle icon to display in
scenes where the angle can be switched.
1 Display the “DVD/DivX® Setup”screen.
=For details, refer to Displaying DVD/DivX®
Setup menu on page 94.
2 Touch [Multi Angle].
3 Touch [On] or [Off].
!On (default):
Displays the angle icon in scenes where the
angle can be switched.
!Off:
Hides the angle icon.
En
94
Chapter
18 DVD-Video or DivX setup
Setting the aspect ratio
There are two kinds of displays. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. If you use a regular rear display with a
TV aspect of 4:3, you can set the aspect ratio
suitable for your rear display. (We recommend
use of this function only when you want to fit it
to the rear display.)
pWhen using a regular display, select either
“Letter Box”or “Panscan”. Selecting
“16:9”may result in an unnatural image.
1 Display the “DVD/DivX® Setup”screen.
=For details, refer to Displaying DVD/DivX®
Setup menu on page 94.
2 Touch [TV Aspect].
3 Touch [16:9], [Letter Box] or [Panscan].
!16:9: Wide screen image (16:9) is displayed
as it is (initial setting).
!Letter Box: The image is in the shape of a
letter box with black bands at the top and
bottom of the screen.
!Panscan: The image is cut short at the right
and left of the screen.
pWhen playing discs that do not have a pan-
scan system, the disc is played back with
“Letter Box”even if you select “Panscan”
setting. Confirm whether the disc package
bears the mark.
pSome discs do not enable changing of the
TV aspect. For details, refer to the disc’s in-
structions.
Setting the parental lock
Some DVD-Video discs let you use parental
lock to set restrictions so that children cannot
watch violent or adult-oriented scenes. You
can set the parental lock level in steps as de-
sired.
pWhen you set a parental lock level and then
play a disc featuring a parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
When you first use this function, register your
code number. If you do not register a code
number, the parental lock will not operate.
1 Display the “DVD/DivX® Setup”screen.
=For details, refer to Displaying DVD/DivX®
Setup menu on page 94.
2 Touch [Parental Level].
3 Touch [0] to [9] to input a four-digit
code number.
4 While the input number is displayed,
touch [OK].
The code number is registered, and you can
now set the level.
5 Touch any of [1] to [8] to select the de-
sired level.
The parental lock level is set.
!Parental Level 8: Playback of the entire
disc is possible (initial setting).
!Parental Level 7 to Parental Level 2: Play-
back of discs for children and non-adult or-
iented discs is possible.
!Parental Level 1: Only playback of discs for
children is possible.
pIf you want to change the parental level al-
ready set, enter the registered code number
and then select the parental level.
pWe recommend that you keep a record of
your code number in case you forget it.
pThe parental lock level is recorded on the
disc. You can confirm it by looking at the
disc package, the included literature or the
disc itself. You cannot use the parental lock
with discs that do not feature a recorded
parental lock level.
pWith some discs, parental lock operates to
skip certain scenes only, after which normal
playback resumes. For details, refer to the
disc’s instructions.
pIf you forget the registered code number,
touch 10 times on the number input
screen. The registered code number is can-
celed, letting you register a new one.
En 95
Chapter
18
DVD-Video or DivX setup
DVD-Video or DivX setup
Setting the auto play
When a DVD disc with a DVD menu is in-
serted, this unit will cancel the DVD menu
automatically and start playback from the first
chapter of the first title.
pThis function is available on DVD-Video.
pSome DVDs may not operate properly. If
this function is not fully operable, turn this
function off and start playback.
1 Display the “DVD/DivX® Setup”screen.
=For details, refer to Displaying DVD/DivX®
Setup menu on page 94.
2 Touch [Auto Play].
3 Touch [On] or [Off].
!Off (default):
Deactivates the auto play function.
!On:
Activates the auto play function.
pWhen “Auto Play”is set to “On”, the repeat
range is automatically set to .
Setting the subtitle file for
DivX
You can select whether to display DivX exter-
nal subtitles or not.
pIf no DivX external subtitle files exist, the
original DivX subtitles are displayed even
when “Custom”is selected.
1 Display the “DVD/DivX® Setup”screen.
=For details, refer to Displaying DVD/DivX®
Setup menu on page 94.
2 Touch [Subtitle File].
3 Touch [Original] or [Custom].
pUp to 42 characters can be displayed on
one line. If more than 42 characters are set,
the line breaks and the excess characters
are displayed on the next line.
pUp to 126 characters can be displayed on
one screen. If more than 126 characters are
set, the excess characters will not be dis-
played.
pThe DivX subtitles will be displayed even
when the subtitle file setting is on if no cor-
responding subtitle files exist.
pUp to three subtitle lines can be displayed
collectively.
En
96
Chapter
18 DVD-Video or DivX setup
Language code chart for DVDs
Two-letter
code,
input code
Language
Two-letter
code,
input code
Language
Two-letter
code,
input code
Language
aa, 0101 Afar ie, 0905 Interlingue rn, 1814 Rundi
ab, 0102 Abkhazian ik, 0911 Inupiaq ro, 1815 Romanian
af, 0106 Afrikaans in, 0914 Indonesian ru, 1821 Russian
am, 0113 Amharic is, 0919 Icelandic rw, 1823 Kinyarwanda
ar, 0118 Arabic it, 0920 Italian sa, 1901 Sanskrit
as, 0119 Assamese iw, 0923 Hebrew sd, 1904 Sindhi
ay, 0125 Aymara ja, 1001 Japanese sg, 1907 Sango
az, 0126 Azerbaijani ji, 1009 Yiddish sh, 1908 Serbo-Croat
ba, 0201 Bashkir jw, 1023 Javanese si, 1909 Sinhala
be, 0205 Belarusian ka, 1101 Georgian sk, 1911 Slovak
bg, 0207 Bulgarian kk, 1111 Kazakh sl, 1912 Slovenian
bh, 0208 Bihari kl, 1112 Greenlandic sm, 1913 Samoan
bi, 0209 Bislama km, 1113 Central Khmer sn, 1914 Shona
bn, 0214 Bengali kn, 1114 Kannada so, 1915 Somali
bo, 0215 Tibetan ko, 1115 Korean sq, 1917 Albanian
br, 0218 Breton ks, 1119 Kashmiri sr, 1918 Serbian
ca, 0301 Catalan ku, 1121 Kurdish ss, 1919 Swati
co, 0315 Corsican ky, 1125 Kirghiz st, 1920 Sotho
cs, 0319 Czech la, 1201 Latin su, 1921 Sundanese
cy, 0325 Welsh ln, 1214 Lingala sv, 1922 Swedish
da, 0401 Danish lo, 1215 Lao sw, 1923 Swahili
de, 0405 German lt, 1220 Lithuanian ta, 2001 Tamil
dz, 0426 Dzongkha lv, 1222 Latvian te, 2005 Telugu
el, 0512 Greek mg, 1307 Malagasy tg, 2007 Tajik
en, 0514 English mi, 1309 Maori th, 2008 Thai
eo, 0515 Esperanto mk, 1311 Macedonian ti, 2009 Tigrinya
es, 0519 Spanish ml, 1312 Malayalam tk, 2011 Turkmen
et, 0520 Estonian mn, 1314 Mongolian tl, 2012 Tagalog
eu, 0521 Basque mo, 1315 Moldavian tn, 2014 Tswana
fa, 0601 Persian mr, 1318 Marathi to, 2015 Tonga
fi, 0609 Finnish ms, 1319 Malay tr, 2018 Turkish
fj, 0610 Fijian mt, 1320 Maltese ts, 2019 Tsonga
fo, 0615 Faroese my, 1325 Burmese tt, 2020 Tatar
fr, 0618 French na, 1401 Nauru tw, 2023 Twi
fy, 0625 Western Frisian ne, 1405 Nepali uk, 2111 Ukrainian
ga, 0701 Irish nl, 1412 Dutch ur, 2118 Urdu
gd, 0704 Scot.Gaelic no, 1415 Norwegian uz, 2126 Uzbek
gl, 0712 Galician oc, 1503 Occitan vi, 2209 Vietnamese
gn, 0714 Guarani om, 1513 Oromo vo, 2215 Volapük
gu, 0721 Gujarati or, 1518 Oriya wo, 2315 Wolof
ha, 0801 Hausa pa, 1601 Panjabi xh, 2408 Xhosa
hi, 0809 Hindi pl, 1612 Polish yo, 2515 Yoruba
hr, 0818 Croatian ps, 1619 Pashto zh, 2608 Chinese
hu, 0821 Hungarian pt, 1620 Portuguese zu, 2621 Zulu
hy, 0825 Armenian qu, 1721 Quechua
ia, 0901 Interlingua rm, 1813 Romansh
En 97
Chapter
18
DVD-Video or DivX setup
DVD-Video or DivX setup
You can play compressed audio files stored in
the external storage device (USB, SD).
pWhen you play audio files stored on a USB
storage device, a USB interface cable for
iPod (sold separately) is required for con-
nection.
pIn the following description, the SD mem-
ory card and USB memory device are col-
lectively referred to as the “external storage
device (USB, SD)”. If it indicates the USB
memory device only, it is referred to as the
“USB storage device”.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Insert the SD memory card into the SD
card slot or plug the USB storage device
into the USB connector.
=For details, refer to Plugging in a USB sto-
rage device on page 18.
=For details, refer to Inserting and ejecting an
SD memory card on page 16.
pPlayback is performed in order of folder
numbers. Folders are skipped if they con-
tain no playable files. If there are no play-
able files in folder 01 (root folder), playback
starts from folder 02.
3 Touch [USB] or [SD] on the left edge of
the screen to display the “USB”or “SD”
screen.
4 Use the touch panel keys on the screen
to control the external storage device
(USB, SD).
=For details, refer to Using the touch panel
keys (Music) on page 99.
Reading the screen
1
3426
7
5
pThis unit may not achieve optimum perfor-
mance with some external storage devices.
p
You can play back the files on a USB storage
device compliant with the Mass Storage Class.
For details about the USB Class, refer to the
manual supplied with the USB storage device.
1Source icon
Shows which source has been selected.
2File number indicator
Shows the number of the file currently playing.
3Current time
4File type indicator
Shows the type of audio files.
5Playback mode
6Current file information
!:Track title
Shows the title of the track currently
playing (when available).
pIf the title of a track is not available,
the file name appears.
!:Artist name
Shows the artist name currently playing
(when available).
!:Folder name/Album title
Shows the title of the album of the cur-
rent file (when available).
pIf the title of an album is not avail-
able, the folder name appears.
!Play time
Shows the elapsed playing time within
the current file.
p“-------”is displayed if there is no corre-
sponding information.
7Playback condition indicator
Indicates the current playback condition.
En
98
Chapter
19 Playing music files (from USB or SD)
Playing files in random order
Indicator Meaning
Does not play files in random order.
Plays all audio files in the current re-
peat play range in random order.
Setting a repeat play range
Indicator Meaning
Repeats all compressed audio files
in the selected external storage de-
vice (USB, SD).
Repeats just the current file.
Repeats the current folder.
Using the touch panel keys
(Music)
123
5
78 6
4
1Switches the operation screen
Touching this key switches between the
screen to operate music files and that to oper-
ate video files. This touch panel key is only
available when there are both audio and video
files on the external storage device (USB, SD).
2Selects a file from the list
Touching the key displays the list which lets
you find track titles or folder names on an ex-
ternal storage device (USB, SD).
Touching a folder on the list shows its content.
You can play a file on the list by touching it.
3Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
4Operates some functions by swipe action
=
For details, refer to Swipe action on page 25.
5Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
pIf you skip the file forward or backward
when the repeat play range in , the re-
peat play range changes to .
=For details, refer to Playback condition
indicator on page 98.
6Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
7Plays files in random order
The files in the current repeat play range can be
played at random by only touching a single key.
p
If you turn the random play on when the
repeat play range is set to , the repeat
play range changes to automatically.
=For details, refer to Playback condition
indicator on page 98.
8Playback and Pause
Touching [d]or[e] switches between play-
back and pause.
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast forward.
En 99
Chapter
19
Playing music files (from USB or SD)
Playing music files (from USB or SD)
You can play video files stored in the external
storage device (USB, SD).
pWhen you play video files stored on a USB
storage device, a USB interface cable for
iPod (sold separately) is required for con-
nection.
pIn the following description, the SD mem-
ory card and USB memory device are col-
lectively referred to as the “external storage
device (USB, SD)”. If it indicates the USB
memory device only, it is referred to as the
“USB storage device”.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Insert the SD memory card into the SD
card slot or plug the USB storage device
into the USB connector.
=For details, refer to Plugging in a USB sto-
rage device on page 18.
=For details, refer to Inserting and ejecting an
SD memory card on page 16.
pPlayback is performed in order of folder
numbers. Folders are skipped if they con-
tain no playable files. If there are no play-
able files in folder 01 (root folder), playback
starts from folder 02.
3 Touch [USB] or [SD] on the left edge of
the screen to display the “USB”or “SD”
screen.
4 Touch the screen to display the touch
panel keys.
5 Use the touch panel keys on the screen
to control the external storage device
(USB, SD).
=For details, refer to Using the touch panel
keys (Video) on page 101.
Reading the screen
1
32 5
6
4
7
pThis unit may not achieve optimum perfor-
mance with some external storage devices.
pYou can play back the files on a USB sto-
rage device compliant with the Mass Sto-
rage Class. For details about the USB
Class, refer to the manual supplied with
the USB storage device.
1Source icon
Shows which source has been selected.
2File number indicator
Shows the number of the file currently play-
ing.
3Current time
4Playback mode
5Current video information
!File name indicator
Shows the file name currently playing.
!Folder name indicator
Shows the folder name currently play-
ing.
6Playback condition indicator
Indicates the current playback condition.
Setting a repeat play range
Indicator Meaning
Repeats all video files in the selected
external storage device (USB, SD).
Repeats just the current file.
Repeats the current folder.
7Play time indicator
En
100
Chapter
20 Playing video files (from USB or SD)
Shows the elapsed playing time within the
current file.
Using the touch panel keys
(Video)
123 4
6
8a 7
5
9
1Switches the operation screen
Touching this key switches between the
screen to operate music files and that to oper-
ate video files. This touch panel key is only
available when there are both audio and video
files on the external storage device (USB, SD).
2Selects a file from the list
You can select and play your choice of titles
from the list.
The contents of the folder in which the cur-
rently playing file is located are displayed.
3Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
4Hides the touch panel keys and informa-
tion of the current video
Touching shows only the current video.
pIf you want to display the touch panel
keys and information of the current
video again, touch anywhere on the LCD
screen.
5Operates some functions by swipe action
pWhen the video is displayed in full
screen mode, the whole screen be-
comes a swipe response area.
=For details, refer to Swipe action on page
25.
6Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
=For details, refer to Playback condition
indicator on page 100.
7Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
8Searches for a desired scene and starts
playback from a specified time
=For details, refer to Searching for a speci-
fic scene and starting playback from a
specified time on page 101.
9Stops playback
aPlayback and Pause
Touching [d]or[e] switches between play-
back and pause.
Searching for a specific scene
and starting playback from a
specified time
You can search for a desired scene by specify-
ing the time.
1 Touch .
2 Touch the keys to input the target num-
ber or time and then touch [Enter].
!To select 5 minutes 3 seconds, touch [5],
[min], [3], [sec] and [Enter] in order.
!To select 71 minutes 00 seconds, touch [7],
[1], [min] and [Enter] in order.
En 101
Chapter
20
Playing video files (from USB or SD)
Playing video files (from USB or SD)
!To select 100 minutes 05 seconds, touch
[1], [0], [0], [5], [sec] and [Enter] in order.
pTo cancel an input number, touch .
To cancel the input numbers, touch and
hold .
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
En
102
Chapter
20 Playing video files (from USB or SD)
Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
pA USB interface cable for iPod (sold sepa-
rately) is required for connection.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Connect your iPod.
The source changes and then playback will
start.
=For details, refer to Connecting your iPod on
page 19.
pIf the iPod is already connected, touch
[iPod] on the left edge of the screen.
=For details, refer to Selecting a source
on page 71.
pIf you connect the iPhone or iPod touch,
quit applications before connecting.
3 Use the touch panel keys on the screen
to control your iPod.
=For details of the operation, refer to Using
the touch panel keys on page 104.
pThe video image of iPod may have noise if
the rear display outputs the video image.
When noise is produced in the video image
of iPod, turn off output setting of the rear
display.
=For details of the operations, refer to Se-
lecting the video for rear display on page
159.
Reading the screen
Music
1
32
6
8
7
45
Video
1
39
a
7
45
1Source icon
Shows which source has been selected.
2Song number indicator
Shows the number of the song and the total
number of songs in the selected list.
3Current time
4Playback mode
5Chapter number indicator
Shows the current chapter number and total
number of chapters when a file with chapters
is played (when available).
6Album artwork
Album art of the current song is displayed if it
is available.
7Playback condition indicator
Indicates the current playback condition.
En 103
Chapter
21
Using an iPod (iPod)
Using an iPod (iPod)
Setting the shuffle play
Indicator Meaning
Cancels the shuffle play.
Plays back songs or videos in ran-
dom order within the selected list.
Selects an album randomly, and
then plays back all the songs in that
album in order.
The actions while this indicator is
displayed on the video operation
screen vary depending on the con-
nected iPod.
Setting a repeat play range
Indicator Meaning
Repeats all songs or videos in the se-
lected list.
Repeats just the current song or
video.
8Current song (episode) information
!:Song title (episode)
Shows the title of the current song.
When a podcast is played, the episode
is displayed (when available).
!:Artist name (podcast title)
Shows the artist name currently playing.
When a podcast is played, the podcast
title is displayed (when available).
!:Album title (release date)
Shows the title of the album for the
song. When a podcast is played, the re-
lease date is displayed (when available).
!Play time
Shows the elapsed playing time within
the current song (episode).
p“-------”is displayed if there is no corre-
sponding information.
9File number indicator
Shows the number of the file currently playing
(when available).
aCurrent video information
!:File name indicator
Shows the file name currently playing
(when available).
!:Artist name (podcast title)
Shows the artist name currently playing.
When a podcast is played, the podcast
title is displayed (when available).
!Play time indicator
Shows the elapsed playing time within
the current file.
p“-------”is displayed if there is no corre-
sponding information.
pIf characters recorded on the iPod are not
compatible with this navigation system,
they may become garbled.
Using the touch panel keys
Music
123
5
78 6
4
Video
1239
5
a78 6
4
1Switches the operation screen
Touching this key displays the touch panel key
([Video]or[Music]) to switch between the
screen to operate video files and that to oper-
ate music files.
En
104
Chapter
21 Using an iPod (iPod)
pThis touch panel key is only available
when there are both audio and video file
in your iPod.
2Selects a file from the list
Touching a folder on the list shows its content.
You can play a file on the list by touching it.
Music
Video
pIf you touch , alphabet characters
are displayed.
Touch the first letter of the title of the
video/song you are looking for.
3Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
4Operates some functions by swipe action
pWhen the video is displayed in full
screen mode, the whole screen be-
comes a swipe response area.
=For details, refer to Swipe action on page
25.
5Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
=For details, refer to Playback condition
indicator on page 103.
6Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
7Sets the shuffle play
The shuffle play setting can be changed by
only touching a single key.
=For details, refer to Playback condition
indicator on page 103.
8Playback and Pause
Touching [d]or[e] switches between play-
back and pause.
9Hides the touch panel keys and informa-
tion of the current video
Touching shows only the current video.
pIf you want to display the touch panel
keys and information of the current
video again, touch anywhere on the LCD
screen.
aChanging the wide screen mode
=For details, refer to Changing the wide
screen mode on page 105.
Changing the wide screen
mode
You can set the screen size of video.
pThe default setting is “Full”.
1 Touch on the “iPod”screen.
pThe appearance of this key changes accord-
ing to the current setting.
2 Touch the desired mode.
!Full
A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any
omissions.
!Just
En 105
Chapter
21
Using an iPod (iPod)
Using an iPod (iPod)
The picture is enlarged slightly at the center
and the amount of enlargement increases
horizontally toward the ends of the picture,
enabling you to enjoy a 4:3 picture without
sensing any disparity, even on a wide
screen.
!Cinema
A picture is enlarged by the same propor-
tion as “Full”or “Zoom”in the horizontal di-
rection and by an intermediate proportion
between “Full”and “Zoom”in the vertical
direction; ideal for a cinema-sized (wide
screen) picture where captions lie outside
the frame.
!Zoom
A 4:3 picture is enlarged in the same pro-
portion both vertically and horizontally;
ideal for a cinema-sized (wide screen) pic-
ture.
!Normal
A 4:3 picture is displayed normally, giving
you no sense of disparity since its propor-
tions are the same as those of the normal
picture.
pImages may be unclear when “Cinema”or
“Zoom”is selected.
pRemember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author’s
rights protected by the Copyright Law.
Operating by hardware
buttons
Pressing the TRK button
You can skip songs, videos or podcasts for-
ward or backward.
When a song, video or podcast with chapter is
played, you can skip chapter forward or back-
ward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
En
106
Chapter
21 Using an iPod (iPod)
WARNING
Certain uses of a smartphone may not be
legal while driving in your jurisdiction, so
you must be aware of and obey any such re-
strictions.
If in doubt as to a particular function, only
perform it while the car is parked.
No feature should be used unless it is safe to
do so under the driving conditions you are
experiencing.
When connecting iPhone or smartphone with
applications installed, you can control, view,
and/or hear application content from this navi-
gation system.
pIn this chapter, iPhone and iPod touch will
be referred to as iPhone.
In this navigation system, you can use the fol-
lowing applications.
!Pandora®
!Aha Radio
pBe sure to read Using app-based connected
content before you perform this operation.
=For details, refer to Using app-based con-
nected content on page 191.
pEven if you switch to another source while
listening to Aha Radio contents, playback
of the contents continues when you switch
back to the Aha Radio source.
pWhen you are talking on a cellular phone
connected to this navigation system via
Bluetooth wireless technology, playback is
paused temporarily. Playback resumes
when you hang up.
Information for compatibility
of connected devices
The following is detailed information regarding
the devices required to use the Pandora®and
the Aha Radio application on this navigation
system.
For iPhone users
!The device has iOS 3.0 or higher.
!A USB interface cable for iPod (sold sepa-
rately) must be used to connect your
iPhone to this navigation system.
For smartphone users
!The following conditions apply to the use of
this function.
—The device has Android OS 2.2 or high-
er.
—The device supports Bluetooth SPP (Se-
rial Port Profile).
—The device supports Bluetooth A2DP
(Advanced Audio Distribution Profile)
(for AVIC-X850BT and AVIC-X8510BT ).
pCompatibility with all Android devices is
not guaranteed.
For details about Android device com-
patibility with this navigation system,
refer to the information on our website.
!An App Connectivity Kit (CD-AH200) (sold
separately) is required for connection to
this navigation system (for AVIC-Z150BH
and AVIC-X950BH).
!The device is connected to this navigation
system via Bluetooth.
Starting procedure
The procedure varies depending on your type
of device.
For iPhone users
1 Prepare the navigation system to con-
nect to your iPhone.
=For details, refer to Selecting the device con-
nection method on page 157.
2 Start up the Pandora or Aha application
installed on the iPhone.
pBefore starting up, sign in to Pandora or
Aha Radio from your iPhone.
3 Connect your iPhone.
pIf the iPhone is already connected, touch
[Pandora]or[aha] on the left side of the
screen.
En 107
Chapter
22
Streaming Pandora®and using Aha Radio
Streaming Pandora®and using Aha Radio
Streaming Pandora®
You can experience Pandora by connecting an
iPhone or smartphone that has the Pandora
application installed.
Note:
!Certain functionality of the Pandora service is
not available when accessing the service
through the Pioneer navigation system, in-
cluding, but not limited to, creating new sta-
tions, deleting stations, emailing current
stations, buying songs from iTunes, viewing
additional text information, logging in to
Pandora, and adjusting Cell Network Audio
Quality.
!Pandora internet radio is a music service not
affiliated with Pioneer. More information is
available at
http://www.pandora.com
!To ensure compatibility, install the latest ver-
sion of the Pandora application by visiting the
app store on your mobile device.
Reading the screen
1
23
4
1Source icon
Shows which source has been selected.
2Current time
3Current track information
!:Station name indicator
Shows the Pandora station name the
tuner is currently tuned in.
!:Track title
Shows the title of the current track.
!:Artist name
Shows the artist name currently playing.
!:Album title
Shows the title of the album of the cur-
rent track.
!Play time indicator
Shows the elapsed playing time within
the current track.
p“-------”is displayed if there is no corre-
sponding information.
4Album artwork
Album art of the current track is displayed if it
is available.
pIf the album artwork cannot be ac-
quired, the preinstalled image is dis-
played.
En 109
Chapter
22
Streaming Pandora®and using Aha Radio
Streaming Pandora®and using Aha Radio
Using the touch panel keys
12
58 76 4
3
9
1Selects a Pandora station from the list
Touching the key displays the list of your
Pandora stations to select one of them to play.
pTouching plays only one track based
on particular musical characteristics at
a time from shuffled several stations.
pStations indicated by are shared sta-
tions.
pWhen you touch [ABC]or[By Date], the
list item can be sorted.
!ABC:
You can sort the items in the list al-
phabetically.
!By Date:
You can sort the items in the list in
order of dates the items were cre-
ated.
2Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
3Operates some functions by swipe action
=For details, refer to Swipe action on page
25.
4Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
5Thumbs Down
Touching the key gives “Thumbs Down”to the
track currently playing and skip to the next
track.
pThis function is not available when
using a shared station.
6Thumbs Up
Touching the key gives “Thumbs Up”to the
track currently playing.
pThis function is not available when
using a shared station.
7Bookmark
Touching the key displays the screen which
lets you select the artist or track to add book-
marks.
8Playback and Pause
Touching [d]or[e] switches between play-
back and pause.
9Connecting a registered Bluetooth device
manually
pThis is displayed when “App Connec-
tion Settings”is set to “Android”.
=For details, refer to Starting procedure on
page 107.
Operating by hardware buttons
Pressing the TRK button
You can skip the track forward.
En
110
Chapter
22 Streaming Pandora®and using Aha Radio
Using the touch panel keys
123
76 5
4
8
1Pauses the content currently playing and
shows a text pop-up screen
p“-------”is displayed if there is no corre-
sponding information.
Pop-up screen
pTouching [OK] closes the pop-up screen
and plays the content.
2Selects an Aha Radio station from the list
Touching this key displays the list of your avail-
able Aha Radio stations. Touch the desired
Aha Radio station to change Aha Radio
sources.
3Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
4Operates some functions by swipe action
=For details, refer to Swipe action on page
25.
5Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
6Performs additional functions of each sta-
tion or content currently playing
pThe icons displayed vary depending on
each station or content.
Indicator Meaning
Touching the key discloses the cur-
rent car location through Aha Radio.
Touching the key retweets the se-
lected tweets with your Twitter ac-
count.
Touching the key performs fast re-
verse of the current content for 30
seconds.
Touching the key sends you to the
Location confirmation screen of the
selected POI to search for the de-
sired route.
=For subsequent operations, refer
to Setting a route to your destina-
tion on page 44.
Touching the key “likes”the current
content.
pDepending on the content,
touching or cancels “likes”.
En
112
Chapter
22 Streaming Pandora®and using Aha Radio
Indicator Meaning
Touching the key “dislikes”the cur-
rent content.
pDepending on the content,
touching or cancels “dis-
likes”.
Touching the key lets you make a
call to a phone number registered in
the current content using the hands-
free function.
7Playback and pause (or stop)
Touch [d] to start playback. Touching [e] dur-
ing playback, pauses or stops playback.
pPause (or stop) key functionality de-
pends on the content.
8Connecting a registered Bluetooth device
manually
pThis is displayed when “App Connec-
tion Settings”is set to “Android”.
=For details, refer to Starting procedure on
page 107.
Functions coupled with Aha
Radio and the navigation system
Depending on the stations, functions coupled
with the navigation system may also be.
Viewing POI information with Aha Radio
You can check the information of POI location
when setting to the destination the POI loca-
tion obtained with Aha Radio.
=For details, refer to Viewing information
about a specified location on page 32.
pWhen you switch to the map screen while
viewing the content that includes POI loca-
tion information, a maximum of 30 POI
icons are displayed on the map screen.
pThe POI icons on the map will not disap-
pear, even when the smartphone is re-
moved.
The icons will disappear with the following
operations:
!Turning off the ignition switch (ACC
OFF)
!Initializing user data
!Updating the display of the Aha POI
icons
pAha POI icons are updated at the following
intervals.
!When a station with content including
location information is reselected
!When the content lists of the Aha appli-
cation are updated
!If there are 30 or more content items se-
lected and the 31st POI is read
En 113
Chapter
22
Streaming Pandora®and using Aha Radio
Streaming Pandora®and using Aha Radio
You can control the Bluetooth audio player.
pBefore using the Bluetooth audio player,
you must register and connect the device
to this navigation system.
=For details, refer to Registering your
Bluetooth devices on page 56.
pOperations may vary depending on the
Bluetooth audio player.
pDepending on the Bluetooth audio player
connected to this navigation system, the
available operations with this navigation
system may be limited to the following two
levels:
!A2DP (Advanced Audio Distribution
Profile): Only playing back songs on
your audio player is possible.
!A2DP and AVRCP (Audio/Video Remote
Control Profile): Playing back, pausing,
selecting songs, etc., are possible.
pSince a number of Bluetooth audio players
are available on the market, operations
with your Bluetooth audio player using this
navigation system vary considerably in
range. Please refer to the instruction man-
ual that came with your Bluetooth audio
player as well as this manual while operat-
ing your player on this navigation system.
pWhile you are listening to songs on your
Bluetooth audio player, please refrain from
operating your cellular phone as much as
possible. If you try operating your cellular
phone, the signal may cause a noise on the
song playback.
pEven if you switch to another source while
listening to a song on your Bluetooth audio
player, the song playback continues.
pDepending on the Bluetooth audio player
you connected to this navigation system,
operations on this navigation system to
control the player may differ from those ex-
plained in this manual.
pWhen you are talking on a cellular phone
connected to this unit via Bluetooth wire-
less technology, song playback from your
Bluetooth audio player connected to this
unit may be paused.
Starting procedure
1 Pull out the connecting cable for using
the AppRadio Mode.
pYou cannot use Bluetooth audio player
when the connecting cable for using the
AppRadio Mode is connected.
2 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
3 Touch [Bluetooth Audio] on the left
edge of the screen to display the
“Bluetooth Audio”screen.
pThe Bluetooth device is connected when
you touch [Bluetooth Audio]. If the
Bluetooth device is not connected, touch
[Connect].
=For details, refer to Connects and discon-
nects the Bluetooth audio player on
page 116.
4 Use the touch panel keys on the screen
to control the Bluetooth audio player.
=For details, refer to Using the touch panel
keys on page 115.
Reading the screen
1
6
8
345
2
7
1Source icon
Shows which source has been selected.
2File number indicator
Shows the file number currently playing
(when available).
3Current time
En
114
Chapter
23 Using the Bluetooth audio player
4Battery status of the Bluetooth device
pDepending on the Bluetooth device, this
icon may not appear.
5Connection status indicator
Shows whether the device featuring Bluetooth
technology is connected or not.
6Device name indicator
7Playback condition indicator
Indicates the current playback condition if the
connected Bluetooth audio player features
AVRCP 1.3.
Playing files in random order
Indicator Meaning
Does not play files in random order.
Plays all audio files in the current
group in random order.
Plays all audio files in the current re-
peat play range in random order.
Setting a repeat play range
Indicator Meaning
Does not repeat.
Repeats just the current file.
Repeats the current group.
Repeats all audio files in the
Bluetooth audio player.
8Current file information
If the connected Bluetooth audio player fea-
tures AVRCP 1.3, the following file information
will be displayed.
!:Track title
Shows the title of the track currently
playing (when available).
!:Artist name
Shows the artist name currently playing
(when available).
!:Album title
Shows the title of the album of the cur-
rent file (when available).
!Play time indicator
Shows the elapsed playing time within
the current file.
pIn the following cases, file information
will only be displayed after a file starts
or resumes playing:
!You connect a Bluetooth audio player
compatible with AVRCP1.3, and op-
erate the player to start playing.
!You select another file when play-
back is paused.
Using the touch panel keys
9
5
78
12 3
6
4
1Selects a track from the list
Touching this key displays the list in which
you can find the track title and the folder
name of Bluetooth audio player.
Touching a folder on the list shows its content.
You can play a track on the list by touching it.
pThis function is only available when the
connected Bluetooth audio player sup-
ports AVRCP 1.4.
2Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
En 115
Chapter
23
Using the Bluetooth audio player
Using the Bluetooth audio player
3Switches the screen displays
Each touch of this key, switches between the
file information screen and the list selection
screen.
4Operates some functions by swipe action
=For details, refer to Swipe action on page
25.
5Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
pThis function is only available when the
connected Bluetooth audio player sup-
ports AVRCP 1.3.
=For details, refer to Playback condition
indicator on page 115.
6Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
7Plays files in random order
All of the files within the repeat play range
can be played at random by only touching a
single key.
pThis function is only available when the
connected Bluetooth audio player sup-
ports AVRCP 1.3.
=For details, refer to Playback condition
indicator on page 115.
8Connects and disconnects the Bluetooth
audio player
The Bluetooth audio player is disconnected
when you touch [Disconnect].
pIf the Bluetooth audio player is not con-
nected, touch [Connect] and await for
the Bluetooth wireless connection.
9Playback and Pause
Touching [d]or[e] switches between play-
back and pause.
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
En
116
Chapter
23 Using the Bluetooth audio player
Introducing SiriusXM tuner
operations
You can use this unit to control a SiriusXM
Connect Vehicle Tuner, which is sold sepa-
rately.
For more information on how to install
SiriusXM Connect Vehicle Tuner, consult the
installation guide included with the tuner.
Everything worth listening to is on SiriusXM,
getting over 130 channels, including the most
commercial‐free music, plus the best sports,
news, talk and entertainment. A SiriusXM Ve-
hicle Tuner and Subscription are required. For
more information, visit www.siriusxm.com.
To subscribe to the SiriusXM
Satellite Radio service
1 Select SiriusXM as the source.
You should be able to tune in to Channel 1. If
you cannot get Channel 1, ensure your
SiriusXM Connect Vehicle Tuner is installed
correctly as described in the tuner installation
guide.
2 Touch on the “SiriusXM”screen.
3 Input [000] and then touch [Enter].
The radio tunes in to Channel 0.
4 Touch .
The “SiriusXM”screen returns.
5 Check the Radio ID.
The SiriusXM Radio ID can be found by tuning
to Channel 0. In addition, the Radio ID is lo-
cated on the bottom of the SiriusXM Connect
Vehicle Tuner.
Please note that the SiriusXM Radio ID does
not include the letters I, O, S or F.
You will need this number to activate your sub-
scription.
6 Activate the service either online or by
phone.
!Visit the website, www.siriusxm.com/activa-
tenow
!Call SiriusXM Listener Care at 1-866-635-
2349 to activate.
!To activate SiriusXM Canada service go to
www.xmradio.ca and click on “ACTIVATE
RADIO”in the top right corner, or call
1-877-438-9677.
#The SiriusXM satellites will send an activation
message to your tuner. When the tuner has re-
ceived the message, “Subscription updated.”is
displayed.
Once you have subscribed, SiriusXM will send an
activation message to your tuner.
The activation process usually takes 10 to 15 min-
utes but may take up to an hour in some cases.
Do not turn off the unit while the activation mes-
sage is displayed.
Starting procedure
1 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
2 Touch [SiriusXM] on the left edge of the
screen to display the “SiriusXM”screen.
3 Use the touch panel keys on the screen
to control the SiriusXM tuner.
=For details, refer to Using the touch panel
keys on page 118.
Reading the screen
2
1
3 4
789 a
56
1Source icon
Shows which source has been selected.
En 117
Chapter
24
Using the SiriusXM tuner
Using the SiriusXM tuner
2Current time
3Band indicator
Shows which band the radio is tuned to:
SXM1, SXM2 or SXM3.
4Current channel information
Shows the detailed information of the broad-
cast channel currently being received.
!:Channel name
Shows the channel name to which the
tuner is currently tuned.
pThe Radio ID is displayed when
Channel 0 is selected.
!:Category name
Shows the category name of the broad-
cast channel.
pThe Radio ID is displayed when
Channel 0 is selected.
!:Artist (performer) name
Shows the artist (performer) name cur-
rently playing (when available).
!:Song title (program name)
Shows the title of the current song (pro-
gram).
!:Detailed information
Shows the information on the content
currently being played.
pThe item is blank if there is no corre-
sponding information.
5Song info reception indicator
Shows the reception status of the song infor-
mation.
Indicator Meaning
Appears when the navigation system
receives song information and can
store it.
The icon is displayed on the
“SiriusXM”screen.
Appears when the navigation system
is storing song information.
The icon is displayed on all AV opera-
tion screens.
6Song info status indicator
Shows the status of the song information
stored in the navigation system.
Indicator Meaning
Displays the number of song infor-
mation items stored in the naviga-
tion system.
The icon is displayed on all AV opera-
tion screens.
Appears when the song information
is transferred to an iPod.
The icon is displayed on all AV opera-
tion screens.
7Signal level indicator
8Play time indicator
Shows the elapsed playing time within the
stored broadcast.
9Preset number indicator
Shows the selected preset item
aChannel number indicator
Shows the channel number to which the
tuner is currently tuned.
Using the touch panel keys
234
ba
5
e
7
8
6
cdf
g
9
1
1Operates some functions by swipe action
=For details, refer to Swipe action on page
25.
2Selects a band
Touching the key repeatedly switches between
the following SiriusXM bands: SXM1,SXM2,
or SXM3.
pThis function is convenient for preparing
different preset lists for each band.
3Selects a channel from the list
=For details, refer to Selecting a channel
from the list on page 120.
En
118
Chapter
24 Using the SiriusXM tuner
4Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
5Displays the “Function”menu
6Scrolls the text
If not all the characters can be displayed with-
in the displayed area, touching the key to the
right of the item allows you to see the remain-
ing characters.
7Memorizes the current channel
=For details, refer to Memorizing the cur-
rent contents on page 122.
8Performs scan tuning
To perform channel scan tuning, touch this
key.
=For details, refer to Using the Tune
Scan™on page 121.
9Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
aStores the iTunes®song tagging
Touching this key stores the iTunes song tag-
ging from the broadcasting station on your
iPod.
=For details, refer to Storing song informa-
tion to an iPod (iTunes Tagging) on page
123.
bSelects a channel directly
=For details, refer to Selecting a SiriusXM
channel directly on page 120.
cReturns to live broadcast
Use to return to the live broadcast while in
Replay™mode.
=For details, refer to Using the “Replay™”
function on page 120.
dSkips forward or backward
Touching [o] skips the contents backward
while in Replay™mode.
Touching [p] skips the contents forward
while in Replay™mode.
=For details, refer to Using the “Replay™”
function on page 120.
ePlayback and Pause
Touching [d]or[e] switches between play-
back and pause of the contents while in
Replay™mode.
=For details, refer to Using the “Replay™”
function on page 120.
fPerforms manual tuning
The channels move up or down one at a time.
pIf you keep touching or you can
skip the broadcasting channels.
gRecalls channels from the preset
Touching this key displays the preset channel
list.
Touch the item of the list (“1”to “6”) to switch
to a channel registered as a preset channel.
pIf you touch the preset channel list dis-
play key while the preset channel list is
displayed, the list disappears and preset
tuning keys are displayed.
Preset channel list display key
Preset tuning keys
!Once you have stored broadcast chan-
nels, you can easily recall preset chan-
nels from memory with a single touch of
a key.
=For details, refer to Storing broadcast
channels on page 120.
!If you turn on the Tune Start setting,
you can play from the beginning of the
song that is broadcast when you switch
to the preset channel (Tune Start™func-
tion).
pYou cannot replay a broadcast prior
to the beginning of the stored data.
pIf you touch , the tuner will tune to
the current live broadcast.
=For details, refer to Setting the Tune
Start™on page 121.
En 119
Chapter
24
Using the SiriusXM tuner
Using the SiriusXM tuner
Storing broadcast channels
With a touch of any of the preset tuning keys
(“1”to “6”), you can easily store up to six
broadcast channels for later recall (also with a
single touch of a key).
pThe broadcast channel may not be stored
depending on the broadcast channel.
1 Select the channel that you want to
store in memory.
2 Display the preset channel list.
=For details, refer to Recalls channels from
the preset on page 119.
3 Touch and hold a preset tuning keys
([1] to [6]).
The selected channel is then memorized.
The next time you touch the same preset tun-
ing key “1”to “6”, the channel is recalled from
memory.
pUp to 18 channels, six for each of the three
SiriusXM bands, can be memorized.
Selecting a SiriusXM channel
directly
You can select a broadcast channel directly by
entering the desired channel number.
1 Touch on the “SiriusXM”screen.
2 Touch [0] to [9] to input the desired
channel number.
To cancel the input numbers one by one,
touch [Clear].
3 While the input number is displayed,
touch [Enter].
The SiriusXM channel that was entered is se-
lected.
4 Touch .
The previous screen returns.
Selecting a channel from the list
You can select a channel from the channel list
category.
1 Touch on the “SiriusXM”screen.
The list screen appears.
2 Touch the category name you want.
The category in the hierarchy under the se-
lected channel list is displayed.
pThe channel which broadcasts is displayed,
if the song, artist, or your favorite sport
teams registered in the alert list is broad-
casting.
3 Touch the desired channel.
The tuner then tunes to the broadcast you se-
lected.
pEach touch of [Info] changes the display in-
formation as follows:
CH Name List —Artist List —Song List
—Content List
Using the “Replay™”function
You can play back up to 60 minutes broadcast
of the channel currently being listened to
using the “Replay™”function.
%Touch [o] on the “SiriusXM”screen.
The recent broadcast is played.
While the recent broadcast is being played,
you can operate as follows:
En
120
Chapter
24 Using the SiriusXM tuner
When enabled, the Parental Control feature re-
quires you to enter a passcode to tune to the
locked channels.
Setting the passcode
1 Touch on the “SiriusXM”screen.
The “Function”menu appears.
2 Touch [Parental Control].
3 Enter the passcode (the default pass-
code is “0000”).
The “Parental Control”menu appears.
4 Touch [Edit Code].
5 Enter the passcode you want to set,
and then touch [Enter].
The “Please re-enter new code.”screen ap-
pears.
pTo cancel the input numbers one by one,
touch [Clear].
6 Re-enter the passcode, and then touch
[Enter].
The passcode is changed.
Locking the channel
1 Touch on the “SiriusXM”screen.
The “Function”menu appears.
2 Touch [Parental Control].
3 Enter the current passcode.
The “Parental Control”menu appears.
4 Touch the channel you want to lock.
appears and the channel is locked.
pIf you touch the channel you locked, the
icon switches to and the lock is can-
celed.
pIf you touch [Clear All], all locks are can-
celed.
Using the Content Alerts
function (such as Song Alerts,
Artist Alerts and Game Alerts)
While listening to SiriusXM Satellite Radio,
you can be alerted when your favorite songs,
artists or games involving your favorite sports
teams are playing on other channels. The
radio will display an Alert message when a
matching artist, song or team is found on an-
other channel. Then you can choose if you
want to tune to that favorite or you can ignore
it and stay on your current channel. Informa-
tion on setting up the Artist, Song and Game
Alerts is described below.
Memorizing the current contents
The keywords of song titles, artist names, and
your favorite sport teams to which you are lis-
tening can be memorized to an alert list.
1 Touch [Memory] on the “SiriusXM”
screen.
A confirmation message appears.
2 Touch the item you want to memorize.
The keyword is memorized to an alert list.
When a program that matches a keyword
memorized to the alert list is broadcast, a
beep sounds and a message is displayed.
3 Touch [Jump] to switch to that station.
You can listen to that track.
pYou can enable or disable alerts by setting
the alert function.
pNotification may not be provided depending
on the status of the navigation system.
#If you touch [Stay], the channel does not
switch.
Setting the program you want to be
alerted
1 Touch on the “SiriusXM”screen.
The “Function”menu appears.
2 Touch [Alert Setting].
The “Alert Setting”screen appears.
En
122
Chapter
24 Using the SiriusXM tuner
3 Touch the keyword you want to be
alerted.
The alert indicator is highlighted, and the alert
setting is enabled.
pIf you touch the indicator highlighted, the
alert setting is canceled.
Alert indicator
31 2
1Team Settings
Sets details of sport teams about which you
want to be alerted.
=For details, refer to Selecting teams for
Game Alert on page 123.
2Delete All
Deletes all items memorized to the alert list.
3Alert : On
Each touch of this key changes the setting
as follows:
!Alert : On (default):
The alert function is enabled.
!Alert : Off:
The alert function is disabled.
pIf you touch and hold the list item, you can
delete the item from the list.
pYou can register up to 50 keywords in the
alert list.
Selecting teams for Game Alert
This navigation system can alert you when
games involving your favorite sports teams are
about to start. To use this function you need to
store the teams you want to follow in advance.
1 Touch [Team Settings] on the “Alert Set-
ting”screen.
The list screen appears.
2 Touch the league you want.
3 Touch the team you want.
The team settings are enabled.
Storing song information
to an iPod (iTunes Tagging)
You can store the song information to the
iPod, when the navigation system has received
the song information. The songs will show up
in a playlist called “Tagged playlist”in iTunes
next time you synchronize your iPod. You can
directly buy the songs via the navigation sys-
tem.
Depending on when the song information is
stored, information for the previous song or
the song after the current song may also be
stored. Be sure to confirm the song before you
purchase it.
pThe iTunes Tagging function is available
while digital broadcasts are being received.
pThis function is provided on the following
iPod models:
!iPod touch 5th generation
!iPod touch 4th generation
!iPod touch 3rd generation
!iPod touch 2nd generation
!iPod touch 1st generation
!iPod classic
!iPod nano 6th generation
!iPod nano 5th generation
!iPod nano 4th generation
!iPod nano 3rd generation
!iPhone 5
!iPhone 4S
!iPhone 4
!iPhone 3GS
!iPhone 3G
!iPhone
pThe version of iTunes must be 7.4 or higher.
1 Tune into the broadcast channel.
When song information is received, is dis-
played while the desired song is being broad-
cast, and becomes active.
En 123
Chapter
24
Using the SiriusXM tuner
Using the SiriusXM tuner
=For details, refer to Song info reception in-
dicator on page 118.
2 Touch .
Information on the song on air is stored in the
navigation system.
While the information is being acquired,
is displayed.
When it is complete, turns off and
is displayed.
pThe song information for up to 50 songs
can be stored on this navigation system.
Depending on when the song information
is stored, information for the previous song
or the song after the current song may also
be stored.
3 Connect your iPod.
The song information is transferred to your
iPod.
pIf the iPod is already connected, every time
you touch , the song information will be
transferred to your iPod.
When the song information is stored on
your iPod, disappears.
pWhen transfer of song information is com-
pleted, the information stored in the naviga-
tion system will be automatically deleted.
pIf you turn off the navigation system or dis-
connect the iPod while transferring song in-
formation, the transfer may not
successfully complete.
pWhile the navigation system is storing song
information, transfer to iPod is not possi-
ble.
Operating by hardware
buttons
Pressing the TRK button
You can move the channel up or down.
Pressing and holding the TRK button
You can move channels up or down by holding
down the button.
En
124
Chapter
24 Using the SiriusXM tuner
You can display the video image output by the
device connected to the navigation system.
For details of the connection method, refer to
the Installation Manual.
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
apply the parking brake.
Reading the screen
1
2
1Source icon
Shows which source has been selected.
2Current time
Using AV1
You can display the video image output by the
device connected to video input 1.
1 Turn on the setting of video input 1
(AV1).
=For details, refer to Setting video input 1
(AV1) on page 149.
2 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
3 Touch [AV1] on the left edge of the
screen.
The image is displayed on the screen.
Using AV2
You can display the video image output by the
equipment connected to video input 2.
1 Turn on the setting of video input 2
(AV2).
=For details, refer to Setting video input 2
(AV2) on page 149.
2 Display the AV operation screen.
=For details of the operations, refer to Dis-
playing the AV operation screen on page 71.
3 Touch [AV2] on the left edge of the
screen.
The image is displayed on the screen.
Using the touch panel keys
12
54
3
1Recalls equalizer curves
=For details, refer to Using the equalizer
on page 151.
2Hides the touch panel keys and informa-
tion of the current video
Touching shows only the current video.
pIf you want to display the touch panel
keys and information of the current
video again, touch anywhere on the LCD
screen.
3Operates some functions by swipe action
pWhen the video is displayed in full
screen mode, the whole screen be-
comes a swipe response area.
=For details, refer to Swipe action on page
25.
En 125
Chapter
25
Using AV input
Using AV input
4Displays the “Phone”screen
=For details, refer to Displaying the phone
menu on page 61.
5Changing the wide screen mode
=For details, refer to Changing the wide
screen mode on page 126.
Changing the wide screen
mode
You can set the screen size of video.
pThe default setting is “Full”.
1 Touch on the “AV1”or “AV2”
screen.
pThe appearance of this key changes accord-
ing to the current setting.
2 Touch the desired mode.
!Full
A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any
omissions.
!Just
The picture is enlarged slightly at the center
and the amount of enlargement increases
horizontally toward the ends of the picture,
enabling you to enjoy a 4:3 picture without
sensing any disparity, even on a wide
screen.
!Cinema
A picture is enlarged by the same propor-
tion as “Full”or “Zoom”in the horizontal di-
rection and by an intermediate proportion
between “Full”and “Zoom”in the vertical
direction; ideal for a cinema-sized (wide
screen) picture where captions lie outside
the frame.
!Zoom
A 4:3 picture is enlarged in the same pro-
portion both vertically and horizontally;
ideal for a cinema-sized (wide screen) pic-
ture.
!Normal
A 4:3 picture is displayed normally, giving
you no sense of disparity since its propor-
tions are the same as those of the normal
picture.
pImages may be unclear when “Cinema”or
“Zoom”is selected.
pRemember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author’s
rights protected by the Copyright Law.
En
126
Chapter
25 Using AV input
WARNING
Certain uses of a smartphone may not be
legal while driving in your jurisdiction, so
you must be aware of and obey any such re-
strictions.
If in doubt as to a particular function, only
perform it while the car is parked.
No feature should be used unless it is safe to
do so under the driving conditions you are
experiencing.
To utilize compatible applications via
AppRadio Mode with an iPhone 5/iPod
touch (5th generation), you must first up-
date the Pioneer navigation system’s firm-
ware.
The iPhone 5/iPod touch (5th generation)
compatible firmware is available as a free
download from the Pioneer website:
http://www.pioneerelectronics.com
http://www.pioneerelectronics.ca
Additional cables are also required to con-
nect the iPhone 5/iPod touch (5th genera-
tion) to your Pioneer navigation system.
Please visit the Pioneer website to learn
more about iPhone 5/iPod touch (5th gen-
eration) compatibility and connectivity for
your navigation system.
You can control applications for iPhone and
smartphone directly on the navigation screen
(AppRadio Mode).
In AppRadio Mode, you can operate applica-
tions with finger gestures such as tapping,
dragging, scrolling or flicking on the screen of
the navigation system.
pFor AVIC-X850BT and AVIC-X8510BT,
AppRadio Mode is only available on the
iPhone.
pIn this chapter, the iPhone and iPod touch
will be referred to as iPhone.
pThe compatible finger gestures vary de-
pending on the application for iPhone or
smartphone.
pWhen an application not compatible with
AppRadio Mode is started, depending on
the application, you can see an image of
application on the screen of this navigation
system. However, you cannot operate the
application.
To use the AppRadio Mode, install the
AppRadio app on the iPhone or smartphone
beforehand to enable launching of the appli-
cation on the navigation system. For details
about the AppRadio app, visit the following
site:
For U.S.A.
http://www.pioneerelectronics.com/AppRadioMode
For Canada
http://www.pioneerelectronics.ca/AppRadioMode
pBe sure to read Using app-based connected
content before you perform this operation.
=For details, refer to Using app-based con-
nected content on page 191.
!Pioneer is not liable for any issues that may
arise from incorrect or flawed app-based
content.
!The content and functionality of the sup-
ported applications are the responsibility of
the App providers.
!In AppRadio Mode, functionality through
the product is limited while driving, with
available functions determined by the App
providers.
!Availability of AppRadio Mode functional-
ity is determined by the App provider, and
not determined by Pioneer.
!AppRadio Mode allows access to applica-
tions other than those listed (subject to lim-
itations while driving), but the extent to
which content can be used is determined
by the App providers.
En 127
Chapter
26
Using AppRadio Mode
Using AppRadio Mode
Information for compatibility
of connected devices
The following is the detailed information re-
garding the terminals required to use the ap-
plication for iPhone or smartphone on this
navigation system.
For iPhone users
!This function can be operated with the fol-
lowing iPhone models.
—iPod touch 4th generation
—iPhone 4S
—iPhone 4
!The device has iOS 4.0 or higher.
!A USB interface cable for iPod (sold sepa-
rately) must be used to connect your
iPhone to this navigation system.
For smartphone users
pThis description is for AVIC-Z150BH and
AVIC-X950BH.
!The following conditions apply to the use of
this function.
—The device has Android OS 2.3 or high-
er.
—The device supports Bluetooth SPP (Se-
rial Port Profile).
pCompatibility with all Android devices is
not guaranteed.
For details about Android device com-
patibility with this navigation system,
refer to the information on our website.
!An App Connectivity Kit (CD-AH200) (sold
separately) is required for connection to
this navigation system.
!The device is connected to this navigation
system via Bluetooth.
Starting procedure
The procedure varies depending on your type
of device.
For iPhone users
1 Prepare the navigation system to con-
nect to your iPhone.
=For details, refer to Selecting the device con-
nection method on page 157.
2 Connect your iPhone.
=For details, refer to Connecting your iPod on
page 19.
3 Press the HOME button to display the
“Top Menu”screen.
4 Touch [Apps].
A message, which notifies you that your
iPhone can launch the application, appears
on screen.
A message, which asks you whether you want
to launch your application, appears on your
iPhone.
5 Use your iPhone to launch the applica-
tion.
The AppRadio app is launched.
6 Touch [OK] on the screen of this pro-
duct.
The AppRadio Mode screen (Application
menu screen) appears.
Application menu screen
pIf you connect your device while an
AppRadio Mode-compatible application is
already running, the application operation
screen appears on this navigation system.
En
128
Chapter
26 Using AppRadio Mode
Using the keyboard
CAUTION
For your safety, the keyboard functionality is only
available when the vehicle is stopped and the
parking brake is engaged.
pThis function is only available in AppRadio
Mode on the iPhone.
When you tap the text input area of an applica-
tion for iPhone, a keyboard will be displayed
on-screen. You can input the desired text di-
rectly from this navigation system.
pThe language preference for the keyboard
of this navigation system should be same
as the setting on your iPhone.
If the settings for this product and the
iPhone are different, you may be unable to
enter characters properly.
1 Set the keyboard language.
=For details of the operations, refer to Setting
the keyboard language with application for
iPhone on page 157.
2 Start up the AppRadio Mode.
=For details, refer to Starting procedure on
page 128.
3 Touch the text input area on the appli-
cation operation screen.
A keyboard for entering text appears.
1
2
3456
7
1Enters the characters
2Deletes the input text one letter at a
time, beginning at the end of the text
3Confirms the entry and allows you to
proceed to the next step
4Hides the keyboard and text can now
be entered using the keyboard of
iPhone
5Changes the iPhone keyboard layout
pThe iPhone keyboard layouts that can be
selected by tapping depends on the
setting of Hardware Keyboard Layout of
your iPhone.
6Switches to a keyboard offering nu-
meric and symbol characters
7Converts the case of the keyboard
characters
Using the sound mix function
You can output sound mixing AV source and
an application for iPhone or smartphone
when the AppRadio Mode is used.
1 Start up the AppRadio Mode.
=For details, refer to Starting procedure on
page 128.
2 Press the VOL (+/–) button.
The sound mix menu will be displayed on-
screen.
2
1
1Sets whether to switch the sound mix
function on or off
!Off (default):
The sound mix function is disabled.
!On:
The sound mix function is enabled.
2Adjusts the AppRadio Mode volume
Each touch of [+]or[–] increases or de-
creases the volume level.
En
130
Chapter
26 Using AppRadio Mode
Other functions
Displaying the image of your
application (iPhone)
You can set an image of the application for
iPhone, which is not compatible with
AppRadio Mode, to be shown on the screen.
pDepending on the type of application, you
may not be able to see the image on
screen.
pYou can only control the application on the
connected device.
1 Connect your iPhone.
=For details, refer to Connecting your iPod on
page 19.
2 Press the HOME button to display the
“Top Menu”screen.
3 Touch [Apps].
A message, which notifies you that your
iPhone can launch the application, appears
on screen.
A message, which asks you whether you want
to launch your application, appears on your
iPhone.
4 Use your iPhone to refuse to launch the
application.
5 Touch [OK] on the screen of this pro-
duct.
The black screen appears.
6 Launch an application on your iPhone.
An image of the application appears on the
screen.
7 Press the HOME button to return to the
“Top Menu”screen.
Displaying the image of your
application (smartphone)
pThis function is available on AVIC-Z150BH
and AVIC-X950BH.
You can set an image of the application for
smartphone, which is not compatible with
AppRadio Mode, to be shown on the screen.
pCompatibility with all smartphones is not
guaranteed.
pWhen you use this function, do not connect
other devices via Bluetooth wireless tech-
nology. Be sure to disconnect your
Bluetooth device before using this func-
tion.
pYou can only control the application on the
connected device.
1 Connect your smartphone to this pro-
duct via the separately sold App Connectiv-
ity Kit (CD-AH200).
pThe cable connection method varies de-
pending on your device.
=For details of the operations, refer to the In-
stallation Manual.
2 Press the HOME button to display the
“Top Menu”screen.
3 Touch [Apps].
The image in your smartphone appears on the
screen.
4 Launch an application on your smart-
phone.
An image of the application appears on the
screen.
5 Press the HOME button to return to the
“Top Menu”screen.
En 131
Chapter
26
Using AppRadio Mode
Using AppRadio Mode
Displaying the information
screen
1 Press the HOME button to display the
“Top Menu”screen.
2 Touch .
The “Information”screen appears.
3 Touch the item you want to configure.
Checking the connections
of leads
Check that leads are properly connected be-
tween the navigation system and vehicle.
Please also check whether they are connected
in the correct positions.
1 Display the “Information”screen.
=For details, refer to Displaying the informa-
tion screen on page 132.
2 Touch [System Information].
The “System Information Menu”screen ap-
pears.
3 Touch [Connection Status].
2
3
4
1
6
7
8
5
9
1Speed Pulse
The Speed Pulse value detected by the navi-
gation system is shown. “0”is shown while
the vehicle is stationary.
2Illumination
When the headlights or small lamps of a ve-
hicle are on, “On”is displayed. When the
small lamps of a vehicle are off, “Off”is dis-
played. (If the orange/white lead is not con-
nected, “Off”appears.)
3Back Signal
When the shift lever is shifted to “R”, the
signal switches to “High”or “Low”. (One of
these is displayed depending on the vehi-
cle.)
4Parking Brake
When the parking brake is applied, “On”is
displayed. When the parking brake is re-
leased, “Off”is displayed.
5GPS Antenna
Indicates the connection status of the GPS
antenna, the reception sensitivity, and from
how many satellites the signal is received.
Color Signal com-
munication
Used in posi-
tioning
Orange Yes Yes
Yellow Yes No
En
132
Chapter
27 Customizing preferences
pWhen the GPS antenna is connected to
this navigation system, “OK”is dis-
played.
When the GPS antenna is not con-
nected to this navigation system, “NOK”
is displayed.
pIf reception is poor, please change the
installation position of the GPS antenna.
6Installation
The installation position of the navigation
system is shown.
If installed correctly, “OK”appears. Indi-
cates whether the installation position of
the navigation system is correct or not.
When the navigation system is installed at
an extreme angle exceeding the limitation
of the installing angle, “NG”will be dis-
played. When the angle of the navigation
system has been changed, “NG”will be dis-
played.
7Bluetooth 1
The name of the connected Bluetooth de-
vice, Bluetooth device address and name of
the profile in use are displayed. The electric
wave condition between this product and
the Bluetooth device is shown in the illus-
tration.
8Bluetooth 2
The name of the connected Bluetooth de-
vice, Bluetooth device address and name of
the profile in use are displayed. The electric
wave condition between this product and
the Bluetooth device is shown in the illus-
tration.
9Bluetooth 3
The name of the connected Bluetooth de-
vice, Bluetooth device address and name of
the profile in use are displayed. The electric
wave condition between this product and
the Bluetooth device is shown in the illus-
tration.
Checking sensor learning
status and driving status
pThe navigation system can automatically
use its sensor memory based on the outer
dimensions of the tires.
1 Display the “Information”screen.
=For details, refer to Displaying the informa-
tion screen on page 132.
2 Touch [System Information].
The “System Information Menu”screen ap-
pears.
3 Touch [3D Calibration Status].
The “3D Calibration Status”screen appears.
2
3
4
15
6
1Learning
Indicates the current driving mode.
2Distance
Indicates driving distance.
3Acceleration or deceleration/Rotational
speed
Indicates the acceleration or deceleration
velocity of your vehicle. Also, the rotational
speed when your vehicle turns to the left or
right is shown.
4Inclination
Indicates the incline of the street that you
are currently on.
5Speed Pulse
Indicates the total number of speed pulses.
6Degree of learning
Sensor learning situations for distance
(Distance), right turn (Right Turn), left turn
(Left Turn) and 3D detection (3D) are indi-
cated by the length of bars.
En 133
Chapter
27
Customizing preferences
Customizing preferences
pWhen tires have been changed or
chains fitted, turning on the Speed
Pulse allows the system to detect the
fact that the tire diameter has changed,
and automatically replaces the value for
calculating distance.
pIf a separately sold speed pulse genera-
tor (ND-PG1) is connected, the distance
calculation value cannot be replaced
automatically.
Clearing status
You can delete the learned results stored in
“Distance”,“Speed Pulse”or “Learning”.
1 Touch [Distance] or [Speed Pulse].
The following message appears.
2 Touch [Yes].
Clears the results stored in “Distance”or
“Speed Pulse”.
3 Touch [Learning].
4 Touch [Reset All].
Clears all leaning results.
pTouch [Reset All] for the following cases:
!After changing the installation position
of the navigation system
!After changing the installation angle of
the navigation system
!After moving the navigation system to
another vehicle
#If you touch [Reset Distance], all learned re-
sults stored in “Distance”are cleared.
Checking the device number
1 Display the “Information”screen.
=For details, refer to Displaying the informa-
tion screen on page 132.
2 Touch [System Information].
The device number of your navigation system
is displayed.
3 Check the device number.
Checking the version
information
1 Display the “Information”screen.
=For details, refer to Displaying the informa-
tion screen on page 132.
2 Touch [Version Information].
The current version is displayed.
3 Check the version information.
4 Touch [OK].
Registering your home
Registering your home position saves time
and effort. Also, routes to home positions can
be calculated easily with a single touch of the
key from the “Destination”. The registered
home position can also be modified later.
pIf your home has been already registered,
delete the registered home location first.
=For details, refer to Deleting registered
contacts on page 66.
1 Search for a location.
=For details, refer to Chapter 4.
After searching for a point, the map of the se-
lected position is displayed.
2 Press the HOME button to display the
“Top Menu”screen.
3 Touch [Destination].
En
134
Chapter
27 Customizing preferences
4 Touch [Home].
If the home location has not been stored yet, a
confirmation message appears.
5 Touch [Yes].
The registration is complete.
pIf your home location has been newly regis-
tered, the name “Home”and home mark
are automatically entered.
pYou can change your home position.
=For details, refer to Editing registered lo-
cations on page 50.
Displaying the adjustment
and correction screen
1 Press the HOME button to display the
“Top Menu”screen.
2 Touch .
The “Edit/Settings”menu appears.
3 Touch [Vol./Pos. Adj.].
The “Volume/Position Adjustment”screen
appears.
4 Touch the item you want to configure.
Switching the muting/
attenuation timing
You can mute the AV source volume or attenu-
ate the output signal.
1 Display the “Volume/Position Adjust-
ment”screen.
=For details, refer to Displaying the adjust-
ment and correction screen on page 135.
2 Touch [Volume/Mute Settings].
The “Volume/Mute Settings”screen appears.
3 Touch [Mute].
4 Touch the item you want to configure.
!Guide/Tel:
The volume is muted or attenuated accord-
ing to the following conditions.
—When the navigation outputs the gui-
dance voice.
—When you use a cellular phone via
Bluetooth technology (dialing, talking,
incoming call).
!Tel:
The volume is muted or attenuated when
you use a cellular phone via Bluetooth tech-
nology (dialing, talking, incoming call).
!Off:
The volume does not change.
En 135
Chapter
27
Customizing preferences
Customizing preferences
Switching the muting/
attenuation level
You can select the muting/attenuation level of
“Mute Timing”. This setting is also effective
for a mute signal that has been received from
the MUTE lead connected to the navigation
unit.
pThis menu is not available when
“Mute Timing”is “Off”.
1 Display the “Volume/Position Adjust-
ment”screen.
=For details, refer to Displaying the adjust-
ment and correction screen on page 135.
2 Touch [Volume/Mute Settings].
The “Volume/Mute Settings”screen appears.
3 Touch [Mute].
4 Touch the item you want to configure.
!–20dB:
The volume becomes 1/10.
!–10dB:
The volume becomes 1/3.
!Mute:
The volume becomes 0.
Setting the Volume for
Guidance and Phone
The sound volume for the navigation can be
set. You can separately set the volume of the
route guidance and the beep sound.
1 Display the “Volume/Position Adjust-
ment”screen.
=For details, refer to Displaying the adjust-
ment and correction screen on page 135.
2 Touch [Volume/Mute Settings].
The “Volume/Mute Settings”screen appears.
3 Touch [Volume].
The “Volume Settings”screen appears.
4 Touch [+] or [–] to set their volume.
On this screen, you can operate the following
items.
!Guidance
This setting controls the guidance volume
of navigation.
!Voice
This setting controls the incoming voice vo-
lume.
!Ringtone
This setting controls the incoming ring tone
volume.
p“Ringtone”and “Voice”adjustments are
needed only when a cellular phone featur-
ing Bluetooth technology is connected.
#If you touch the key next to “Beep”, the setting
is changed.
!On (default):
A beep sounds.
!Off:
The beep sound is muted.
Correcting the current location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
1 Display the “Volume/Position Adjust-
ment”screen.
=For details, refer to Displaying the adjust-
ment and correction screen on page 135.
2 Touch [Modify Current Location].
3 Scroll to the position where you want
to set, then touch [OK].
4 Touch the arrow key on the screen to
set the direction, then touch [OK].
En
136
Chapter
27 Customizing preferences
Switching the road on
which you are driving
When you are driving in the area where an or-
dinary road and toll road run parallel, and if
the system calculates your vehicle position to
be on a road opposite from the one on which
you are actually driving, you can switch your
vehicle position to the right road, i.e. either the
ordinary road or the toll road.
1 Display the “Volume/Position Adjust-
ment”screen.
=For details, refer to Displaying the adjust-
ment and correction screen on page 135.
2 Touch [Find Alternative Location].
The vehicle position is corrected to the right
type of road.
pThe vehicle position may not be corrected
in some cases.
pDuring the route guidance, the vehicle posi-
tion is corrected before the route is
searched again.
Displaying the screen for
navigation function settings
1 Press the HOME button to display the
“Top Menu”screen.
2 Touch .
The “Edit/Settings”menu appears.
3 Touch [Navi Settings].
The “Navi Settings”menu appears.
4 Touch the item you want to configure.
5 Touch to end the setup.
Changing the road color
You can set the road color to bluish or reddish.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Map Display].
3 Touch [Road Color].
The setting screen appears.
4 Touch the item you want to set.
!Blue (default):
Changes to blue based road colors.
!Red:
Changes to red based road colors.
Setting the scroll-Locked 2D
(Normal) View
You can select whether to lock the normal
view when you scroll the screen.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Map Display].
3 Touch [2D-Locked Scroll].
The setting screen appears.
4 Touch the item you want to set.
!Off (default):
Does not lock the normal view when you
scroll the screen.
En 137
Chapter
27
Customizing preferences
Customizing preferences
!On
Locks the normal view when you scroll the
screen.
Displaying the 3D landmarks
pThe 3D landmarks and this setting are only
available on AVIC-Z150BH.
You can select whether to display the 3D land-
marks on the map.
p3D landmarks only appear when the view
mode is “3D View”and the map scale is
set to 0.25 mile (200 m) or lower.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Map Display].
3 Touch [3D Land Mark].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Displays the 3D landmark on the map.
!Off:
Hides the 3D landmark on the map.
Setting the detailed city map
pThis function is only available on AVIC-
Z150BH.
You can select whether to display the city map
when in certain metropolitan city areas.
pThe city map is displayed when the map
scale is 0.05 mile (50 meters) or less.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Map Display].
3 Touch [City Map].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Automatically switches to the city map
when in a city map area.
!Off:
Does not show the city map.
pEven if you switch “City Map”to “On”,
the city map cannot be displayed in
areas where there is no city map data.
Setting the barrier graphic for
the city map
pThis function is only available on AVIC-
Z150BH.
On the city map screen, you can display a
“barrier graphic”pattern where no city map
data is available. This prevents a normal map
of a different scale from being displayed at the
same time, considerably enhancing the clarity
of the city map on screen.
Barrier graphic
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Map Display].
3 Touch [City Map Barrier].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Displays the barrier graphic for the city
map.
When the vehicle position or cursor enters
the barrier graphic area, the graphic disap-
pears and a normal map is displayed in full
screen mode.
!Off:
En
138
Chapter
27 Customizing preferences
Setting the current street name
display
Selects whether to display or hide the street
name (or city name) that your vehicle is travel-
ing along.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Map Display].
3 Touch [Current Location Info.].
The setting screen appears.
4 Touch the item you want to set.
!Street Name (default):
Displays the street name (or city name) on
the map.
!Coordinates:
The current position is displayed in latitude
and longitude.
Setting the criteria of route
calculation
You can predefine the route calculation criter-
ia. This setting controls how the route should
be calculated by taking into account the time,
distance or main road. Determines which con-
dition takes priority for route calculation.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Route Condition].
The setting screen appears.
4 Touch the item you want to set.
!Fast (default):
Calculates a route with the shortest travel
time to your destination as a priority.
!Short:
Calculates a route with the shortest dis-
tance to your destination as a priority.
!Main Road:
Calculates a route that passes major arter-
ial roads as a priority.
Setting the use of toll roads
You can predefine the use of toll roads when
calculating a route. This setting controls
whether toll roads (including toll areas) should
be taken into account.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Toll Road].
The setting screen appears.
4 Touch the item you want to set.
!Use (default):
Calculates a route that may include toll
roads in a standard criteria.
!Avoid:
Calculates a route that avoids toll roads.
Setting the use of ferries
You can predefine the use of ferries when cal-
culating a route. This setting controls whether
ferry crossings should be taken into account.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Ferry].
The setting screen appears.
4 Touch the item you want to set.
!Use (default):
Calculates a route that may include ferries
in a standard criteria.
!Avoid:
Calculates a route that avoids ferries.
En
140
Chapter
27 Customizing preferences
Setting the route calculation by
learning route
The system learns the travel history of your ve-
hicle for each road.
This setting controls whether or not the travel
history should be taken into account.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Learning Route].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Calculates a route with the travel history
taken into account.
!Off:
Calculates a route without the travel history
taken into account.
Setting the route calculation
allowing for traffic congestion
pThis function is available on AVIC-Z150BH
and AVIC-X950BH.
This navigation system can calculate a route
taking into account traffic congestion when it
acquires traffic information.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Traffic Avoidance].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Calculates a route allowing for traffic con-
gestion.
!Off:
Calculates a route without allowing for traf-
fic information.
Setting the route calculation
allowing for time restrictions
This setting controls whether streets or
bridges that have traffic restrictions during a
certain time should be taken into account.
CAUTION
If the time difference is not set correctly, the navi-
gation system cannot consider traffic regulations
correctly. Set the time difference correctly.
=For details, refer to Setting the time difference
on page 145.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Time restrictions].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Calculates a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
!Off:
Calculates a route while ignoring traffic re-
strictions.
pIf you want to set your route to avoid raised
draw bridges, select “On”.
pThe system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if “On”is selected.
Setting the use of freeways
You can predefine the use of freeways when
calculating a route.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
En 141
Chapter
27
Customizing preferences
Customizing preferences
3 Touch [Freeway].
The setting screen appears.
4 Touch the item you want to set.
!Use (default):
Calculates a route that may include free-
ways in a standard criteria.
!Avoid:
Calculates a route that avoids freeways.
Setting to select your route
automatically using the auto
reroute function
pThis function is available on AVIC-Z150BH
and AVIC-X950BH.
You can set in advance a new route and the
current route you select when the navigation
system recommends a new alternative route
automatically and no selection is made.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Auto Reroute Choice].
The setting screen appears.
4 Touch the item you want to set.
!Current Route (default):
Selects the current route.
!Alt. Route:
Selects an alternative route.
Displaying the distance and
estimated time
You can set the display information of the esti-
mated time of arrival in the route guidance.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Distance/ETA].
The setting screen appears.
4 Touch the item you want to set.
!Destination (default):
Displays the distance and the progress to
the destination, elapsed time and the esti-
mated time of arrival.
!Waypoint:
Displays the distance and the progress to
the next waypoint, elapsed time and the es-
timated time of arrival.
Setting the auto reroute function
to avoid traffic congestion
pThis function is available on AVIC-Z150BH
and AVIC-X950BH.
This navigation system can calculate a route
allowing for traffic congestion when the sys-
tem acquires traffic information.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Auto Reroute].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Calculates a route automatically allowing
for traffic congestion.
!Off:
Does not calculate a route automatically.
En
142
Chapter
27 Customizing preferences
Setting the auto-zoom display
This setting enables switching to an enlarged
map around the point where your vehicle is
approaching an intersection, entrance/exit of
freeway or a junction.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Close Up View].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Switches to an enlarged map.
!Off:
Does not switch to an enlarged map.
Changing the setting of the
navigation interruption screen
You can set whether to automatically switch to
the navigation screen from the AV screen
when your vehicle approaches a guidance
point such as an intersection.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [AV Guide Mode].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Switches from the AV operation screen to
the map screen.
!Off:
Does not switch the screen.
pThis setting is effective only when “Close
Up View”is set to “On”.
Setting the App operation
screen interruption
You can set whether to automatically switch to
the navigation screen from the AppRadio
Mode screen.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [App Guide Mode].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Switches from the App operation screen to
the map screen.
!Off:
Does not switch the screen.
Changing the virtual speed of
the vehicle
You can set the average speed for the ordinary
road or freeway to calculate the estimated
time of arrival.
pThis setting is enabled if the route calcula-
tion does not take account of traffic con-
gestion.
=For details, refer to Setting the auto re-
route function to avoid traffic congestion
on page 142.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [Minor Ordinary Road], [Major
Ordinary Road] or [Freeway].
The setting screen appears.
4 Touch the item you want to set.
The estimated time of arrival is calculated
based on the average speed you set.
The average speed you can select for each
kind of road is as follows.
Minor Ordinary Road
!mile or Mile&Yard:
En 143
Chapter
27
Customizing preferences
Customizing preferences
10mph,20mph,25mph (default), 30mph,
40mph
!km:
20km/h,30km/h,40km/h (default),
50km/h,60km/h
Major Ordinary Road
!mile or Mile&Yard:
30mph,40mph,45mph (default), 50mph,
55mph
!km:
50km/h,60km/h,70km/h (default),
80km/h,90km/h
Freeway
!mile or Mile&Yard:
55mph,60mph (default), 70mph,75mph,
80mph
!km:
90km/h,100km/h (default), 110km/h,
120km/h,130km/h
pThe unit may vary depending on the set-
tings.
=For details, refer to Changing the unit be-
tween km and miles on page 144.
pThe estimated time of arrival may not take
into account parameters other than this
speed value.
Changing the unit between km
and miles
This setting controls the unit of distance and
speed displayed on your navigation system.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Guide].
3 Touch [km / mile].
The setting screen appears.
4 Touch the item you want to set.
!mile (default):
Shows distance in miles.
!km:
Shows distance in kilometers.
!Mile&Yard:
Shows distance in miles and yards.
#If you touch [No], the setting is canceled.
Displaying the traffic
notification icon
pThis function is available on AVIC-Z150BH
and AVIC-X950BH.
Selects whether to display or hide the traffic
notification icons on the map when incidents
occur on your route.
1 Display the “Navi Settings”screen.
=For details, refer to Displaying the screen for
navigation function settings on page 137.
2 Touch [Traffic Info].
3 Touch [Traffic].
The setting screen appears.
4 Touch the item you want to set.
!On (default):
Displays the icons on the map.
!Off:
Hides the icons on the map.
Changing the view mode
Various types of screen displays can be se-
lected for navigation guidance.
=For details of the operation, refer to Switch-
ing the view mode on page 33.
Displaying the screen for
system settings
1 Press the HOME button to display the
“Top Menu”screen.
2 Touch .
The “Edit/Settings”menu appears.
3 Touch [System Settings].
The “System Settings”screen appears.
En
144
Chapter
27 Customizing preferences
4 Touch the item you want to configure.
Selecting the language
You can set the languages used on the pro-
gram and voice guidance. Each language can
be set separately.
1 Display the “System Settings”screen.
=For details, refer to Displaying the screen for
system settings on page 144.
2 Touch [Regional Settings].
The “Language Settings”screen appears.
3 Touch [Program Language].
The “Select Program Language”screen ap-
pears.
4 Touch the desired language.
After the language is selected, the previous
screen returns.
5 Touch [Voice Language].
The “Select Voice Language”screen appears.
6 Touch the desired language.
After the language is selected, the previous
screen returns.
7 Touch on the “Language Settings”
screen.
A message confirming whether to restart the
navigation system appears.
8 Touch [Yes].
The navigation system restarts.
#If you press the MODE,MAP,orHOME but-
ton, the setting procedure is canceled.
Setting the time difference
Adjusts the system’s clock. Set the time differ-
ence (+,–) from the time originally set in your
navigation system.
1 Display the “System Settings”screen.
=For details, refer to Displaying the screen for
system settings on page 144.
2 Touch [Time Settings].
The “Time Settings”screen appears.
3 To set the time difference, touch [+] or
[–], [On] or [Off], or [12H] or [24H].
On this screen, you can operate the following
items.
!+, –
Adjusts time for the summer time.
!Summer Time
Turns the summer time on or off.
Off (default):
Changes the summer time setting to off.
On:
Changes the summer time setting to on.
!Time Format
12H (default):
Changes the display to 12-hour format with
am/pm.
24H:
Changes the display to 24-hour format.
Changing the preinstalled
splash screen
You can change the splash screen to other
images preinstalled in the navigation system.
1 Display the “System Settings”screen.
=For details, refer to Displaying the screen for
system settings on page 144.
2 Touch [Splash Screen].
The “Select Splash Screen”screen appears.
3 Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
En 145
Chapter
27
Customizing preferences
Customizing preferences
Adjusting the response
positions of the touch panel
(touch panel calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel screen.
pDo not use sharp pointed tools such as a
ballpoint or mechanical pens, which could
damage the screen.
1 Press and hold the MODE button.
The picture adjustment screen appears.
2 Press and hold the MODE button while
the picture adjustment screen is still dis-
played.
The touch panel adjustment screen appears.
3 Touch two corner of the screen along
the allows, and then touch two center of +
mark at the same time twice.
4 Press the MODE button.
The adjustment results are saved.
5 Press the MODE button once again.
Proceed to the 16-point adjustment.
6 Gently touch the center of the + mark
displayed on the screen.
The target indicates the order.
After you touch all marks, the adjusted posi-
tion data is saved.
pDo not turn off the engine while saving the
adjusted position data.
#If you press the MODE button, the previous
adjustment position returns.
#If you press and hold the MODE button, the
adjustment is canceled.
Setting the illumination color
The illumination color can be selected from 5
different colors. Furthermore, the illumination
can be switched between these 5 colors in
order.
Selecting the color from the preset
colors
1 Display the “System Settings”screen.
=For details, refer to Displaying the screen for
system settings on page 144.
2 Touch [Illumination color setting].
The “Illumination Color”screen appears.
3 Touch the color you want.
Available options:
!Colored keys:
Selects the desired preset color.
!Memory:
Selects the registered color in the memory.
!Scan:
Shifts gradually between the five default
colors in sequence.
!Custom:
Displays the “Illumination Color”screen.
You can customize the illumination color.
=For details, refer to Creating a user-de-
fined color and storing it to memory on
page 147.
Creating a user-defined color and
storing it to memory
You can create a user-defined color and set it
as the illumination color.
1 Display the “System Settings”screen.
=For details, refer to Displaying the screen for
system settings on page 144.
2 Touch [Illumination color setting].
The “Illumination Color”screen appears.
En 147
Chapter
27
Customizing preferences
Customizing preferences
3 Touch [Custom].
The “Illumination Color”screen appears.
4 Touch or to adjust the values for
Red, Green and Blue to create a favorite
color.
Color bar
#You can adjust the color tone by dragging the
color bar.
Watch the illumination of the hardware buttons
while adjusting the color.
5 Touch .
The previous screen returns.
Displaying the icon for setting
the rear display output
You can display the icon to select which
source will be displayed on the rear display.
Icon of output to select which setting of the
rear display
=For details, refer to Selecting the video for
rear display on page 159.
1 Display the “System Settings”screen.
=For details, refer to Displaying the screen for
system settings on page 144.
2 Touch [Rear Monitor Output].
The “Rear Monitor Output Setting Screen”
screen appears.
3 Touch [On] or [Off].
!Off (default):
The icon of the output setting of the rear
display disappears.
!On:
The icon of the output setting of the rear
display appears.
Displaying the screen for
AV system settings
1 Press the HOME button to display the
“Top Menu”screen.
2 Touch .
The “Edit/Settings”screen appears.
3 Touch [Source Settings].
The “Setting according to source”screen ap-
pears.
4 Touch the item you want to configure.
En
148
Chapter
27 Customizing preferences
Setting video input 1 (AV1)
You can use outside video equipment such as
portable players connected to this product
with this setting.
pThis setting applies to mini-jack input.
1 Display the “Setting according to
source”screen.
=For details, refer to Displaying the screen for
AV system settings on page 148.
2 Touch [AV Input].
3 Touch [AV1 Input].
4 Touch [On].
The connected component is enabled.
pUse “AV1 Input”when connecting CD-
RM10 (sold separately) through the external
video component.
#If you touch [Off], the setting is turned off.
Setting video input 2 (AV2)
You can use outside video equipment such as
portable players connected to this product
with this setting.
pThis setting applies to RCA inputs
(AUDIO INPUT and VIDEO INPUT) on the
back of the system.
1 Display the “Setting according to
source”screen.
=For details, refer to Displaying the screen for
AV system settings on page 148.
2 Touch [AV Input].
3 Touch [AV2 Input].
4 Touch [On].
The connected component is enabled.
#If you touch [Off], the setting is turned off.
Changing the screen size of SD/
USB video
Changes the screen size of video. If a video file
is played, you can select the display mode be-
tween normal and full screen.
1 Display the “Setting according to
source”screen.
=For details, refer to Displaying the screen for
AV system settings on page 148.
2 Touch [SD/USB Settings].
3 Touch [SD Video Output Settings] or
[USB Video Output Settings].
4 Touch [Full] or [Normal].
!Full (default):
A picture is enlarged in four directions with-
out keeping the aspect ratio and displays to
the full extent of a screen.
!Normal:
A picture is displayed fitting to the long side
of the screen while keeping the aspect
ratio.
Displaying your DivX VOD
registration code
If you want to play DivX VOD (video on de-
mand) content on this navigation system, you
must first register the unit with your DivX VOD
content provider. You do this by generating a
DivX VOD registration code, which you submit
to your provider.
pThis feature is available when the selected
source is CD,ROM,DivX,orDVD-V.
1 Display the “Setting according to
source”screen.
=For details, refer to Displaying the screen for
AV system settings on page 148.
2 Touch [DivX® VOD].
A screen where you can choose to display a re-
gistration code or deregistration code is dis-
played.
En 149
Chapter
27
Customizing preferences
Customizing preferences
=For details, refer to Setting the rear output
on page 158.
3 Touch or to adjust front/rear
speaker balance.
Each time you touch or , the front/rear
speaker balance moves towards the front or
rear.
“Front 15”to “Rear 15”is displayed as the
front/rear speaker balance moves from the
front to rear.
Set “Front”and “Rear”to “0”when using a
dual speaker system.
4 Touch or to adjust the left/right
speaker balance.
Each time you touch or , the left/right
speaker balance moves towards the left or
right.
“Left 15”to “Right 15”is displayed as the left/
right speaker balance moves from left to right.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volumes.
1 Display the “AV Sound Settings”
screen.
=For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [Loudness].
3 Touch [On].
#If you touch [Off], the setting is turned off.
4 Touch or , and select the level
you want to set.
Low —Mid —High
Using the equalizer
The equalizer lets you adjust equalization to
match the vehicle interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves that
you can easily recall at any time. Here is a list
of the equalizer curves:
Equalizer curve
S.Bass (Super Bass) is a curve in which only low-
pitched sound is boosted.
Powerful is a curve in which low- and high-pitched
sounds are boosted.
Natural is a curve in which low- and high-pitched
sounds are slightly boosted.
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat is a flat curve in which nothing is boosted.
Custom1 is an adjusted equalizer curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom2 is an adjusted equalizer curve that you cre-
ate. If you select this curve, the effect is reflected all
AV source.
pWhen “Flat”is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
“Flat”and a set equalizer curve.
pYou cannot select “Custom1”and “Cus-
tom2”when “Auto EQ”is “On”.
=For details, refer to Using the auto-ad-
justed equalizer on page 153.
1 Display the “AV Sound Settings”
screen.
=For details, refer to Displaying the screen for
AV sound settings on page 150.
En 151
Chapter
27
Customizing preferences
Customizing preferences
2 Touch [EQ Menu].
3 Touch the equalizer you want.
pIf Auto EQ has been set to “On”, an image
corresponding to each equalizer curve you
selected appears.
=For details of the operations, refer to Adjust-
ing the equalizer curve automatically (Auto
EQ) on page 154.
Customizing the equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjustments can be
made with a 8-band graphic equalizer.
pThis function is not available when “Auto
EQ”is “On”.
=For details, refer to Using the auto-ad-
justed equalizer on page 153.
The difference between “Custom1”and
“Custom2”
!A separate “Custom1”curve can be cre-
ated for each source. If you make adjust-
ments when a curve “S.Bass (Super Bass)”,
“Powerful”,“Natural”,“Vocal”,“Flat”,or
“Custom1”is selected, the equalizer curve
settings will be memorized in “Custom1”.
!A“Custom2”curve can be created com-
mon to all sources. If you make adjust-
ments when the “Custom2”curve is
selected, the “Custom2”curve will be up-
dated.
!The “Custom1”curve is applied to each of
the sources selected, but you can apply the
same curve to the following sources.
—AV1 and AV2
—CD,ROM,DVD-V, and DivX
—SD and USB
—Bluetooth Audio,Pandora (Bluetooth
connection) and Aha Radio (Bluetooth
connection)
—Pandora (HDMI connection) and Aha
Radio (HDMI connection) (for AVIC-
Z150BH and AVIC-X950BH)
—iPod,Pandora (iPhone) and Aha Radio
(iPhone)
1 Display the “AV Sound Settings”
screen.
=For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [EQ Menu].
3 Touch one of the keys to select a curve
that you want to use as the basis of custo-
mizing.
4 Touch [Customize].
En
152
Chapter
27 Customizing preferences
Produkt Specifikationer
| Mærke: | Pioneer |
| Kategori: | Navigator |
| Model: | AVIC-X850BT |
Har du brug for hjælp?
Hvis du har brug for hjælp til Pioneer AVIC-X850BT stil et spørgsmål nedenfor, og andre brugere vil svare dig
Navigator Pioneer Manualer
17 August 2024
8 August 2024
4 August 2024
4 August 2024
29 Juli 2024
28 Juli 2024
25 Juli 2024
25 Juli 2024
21 Juli 2024
18 Juli 2024
Navigator Manualer
- Navigator SilverCrest
- Navigator Acer
- Navigator Honda
- Navigator BMW
- Navigator Toyota
- Navigator Opel
- Navigator Sony
- Navigator Mazda
- Navigator Audi
- Navigator Volkswagen
- Navigator Philips
- Navigator Kenwood
- Navigator Lowrance
- Navigator HP
- Navigator Harman Kardon
- Navigator Becker
- Navigator Garmin
- Navigator Sanyo
- Navigator Grundig
- Navigator Volvo
- Navigator Motorola
- Navigator Asus
- Navigator Bushnell
- Navigator Pyle
- Navigator Humminbird
- Navigator Sygic
- Navigator Thomson
- Navigator Skoda
- Navigator Nokia
- Navigator Mio
- Navigator Blaupunkt
- Navigator JVC
- Navigator Uniden
- Navigator Hitachi
- Navigator Medion
- Navigator Alpine
- Navigator Navman
- Navigator Parrot
- Navigator Packard Bell
- Navigator Kapsys
- Navigator Zebra
- Navigator Jensen
- Navigator VDO
- Navigator Zenec
- Navigator Kalkhoff
- Navigator TomTom
- Navigator Cobra
- Navigator Binatone
- Navigator Dual
- Navigator GlobalSat
- Navigator Celestron
- Navigator Overmax
- Navigator Midland
- Navigator Alfa Romeo
- Navigator Raymarine
- Navigator Simrad
- Navigator MaxCom
- Navigator Chrysler
- Navigator Furuno
- Navigator Navitel
- Navigator Caliber
- Navigator Lark
- Navigator Teasi
- Navigator GoClever
- Navigator Clarion
- Navigator V7
- Navigator Airis
- Navigator Audiovox
- Navigator Rand McNally
- Navigator Navigon
- Navigator IGo
- Navigator Magellan
- Navigator Scosche
- Navigator Prestigio
- Navigator Boss
- Navigator Camos
- Navigator Coyote
- Navigator Insignia
- Navigator Eagle
- Navigator Xomax
- Navigator Sylvania
- Navigator Marquant
- Navigator Lanzar
- Navigator GolfBuddy
- Navigator Soundstream
- Navigator VDO Dayton
- Navigator Dashmate
- Navigator Route 66
- Navigator Falk
- Navigator Seecode
- Navigator Nav N Go
- Navigator Pharos
- Navigator Viamichelin
- Navigator ModeCom
- Navigator Xzent
- Navigator CarTrek
- Navigator Whistler
- Navigator ESX
- Navigator Dynavin
- Navigator Cheetah
- Navigator Cydle
- Navigator LXNAV
- Navigator Planet Audio
- Navigator Eclipse
- Navigator Voice Caddie
- Navigator SkyCaddie
- Navigator TELE System
- Navigator IZZO Golf
- Navigator Zoleo
- Navigator Izzo
Nyeste Navigator Manualer
18 Januar 2025
10 Januar 2025
31 December 2025
30 December 2025
29 December 2024
29 December 2024
14 December 2024
14 December 2024
8 December 2024
8 December 2024