Pioneer DEH-1100MPB Manual

Pioneer Bilradio DEH-1100MPB

Læs nedenfor 📖 manual på dansk for Pioneer DEH-1100MPB (15 sider) i kategorien Bilradio. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/15

Printed in Thailand

Imprimé en Thaïlande

<QRD3015-A/N> EW

Installation Manual

Manual de instalación

Installationsanleitung

Manuel d’installation

Manuale d’installazione

Installatiehandleiding

Руководство по установке

CD RDS RECEIVER

REPRODUCTOR DE CD CON RECEPTOR RDS

CD RDS-EMPFÄNGER

AUTORADIO CD RDS

SINTOLETTORE CD RDS

CD RDS-ONTVANGER

CD RDS ПРИЕМНИК

DEH-1120MP

DEH-1100MPB

DEH-1100MP

DEH-112E

DEH-110E

Important

!Check all connections and systems before

fi nal installation.

!Do not use unauthorized parts. Use of un-

authorized parts may ca use malfunctions.

!Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

!Do not install this unit where :

—it may interfere with operation of the vehi-

cle.

—it may cause injury to a passenger as a re-

sult of a sudden stop.

!The semiconductor laser will be damaged if it

overheats. Install this unit away from hot

places such as near the heater outlet.

!Optimum performance is obtained when the

unit is installed at an angle of less than 60°.

60°

DIN front/re ar mo unt

This unit can be properly installed either from

“Front (conventional DIN front-mount) or”

“ ”Rear (DIN rear-mount installation, utilizing

threaded screw holes at the sides of unit c has-

sis). For details, refer to the following installa-

tion methods.

DIN Front-mount

Installation with the rubber bus h

1 Insert the mounting sleeve into the

dashboard.

When installing in a shallow space, use a sup-

plied mounting sleeve. If there is enough

space behind the unit, use factory supplied

mounting sleeve.

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°)

into place.

3 Install the unit.

Dashboard Rubber bush

Mounting sleeve Screw

Removing the unit

1 Extend top and bottom of the trim ring

outwards to remove the trim ring. (When

reattaching the trim ring, point the side

with a groove downwards and attach it.)

Trim ring

!It becomes easy to remove the trim ring if

the front panel is released.

2 Insert the supplied extraction keys into

both sides of the unit until they click into

place.

3 Pull the unit out of the dashboard.

Installation

DIN Rear-mount

1 Extend top and bottom of the trim ring

outwards to remove the trim ring. (When

reattaching the trim ring, point the side

with a groove downwards and attach it.)

Trim ring

!It becomes easy to remove the trim ring if

the front panel is released.

2 Determine the appropriate position

where the holes on the bracket and the

side of the unit match.

3 Tighten two screws on each side.

Screw

Mounting bracket Dashboard or console

!Use either truss screws (5 mm × 8 mm) or

fl ush surface screws (5 mm × 9 mm), de-

pending on the shape of screw holes in the

bracket.

Fastening the front panel

If you do n o t plan to detach the front panel,

the front panel can be fastened w ith supplied

screw.

Screw

Installation

Produkt Specifikationer

Mærke:	Pioneer
Kategori:	Bilradio
Model:	DEH-1100MPB
Produktfarve:	Sort
Skærmtype:	LCD
Fjernbetjening inkluderet:	Ingen
Klar til iPod:	Ingen
RDS Tuner inkluderet:	Ja
MP3-afspilning:	Ja
CD-R-afspilning:	Ja
CD-RW-afspilning:	Ja
Belysningsfarve:	Blå
I/O-porte:	1 x Aux-in (Front)\n1 x RCA Preout (Rear)\n1 x Hard-wired Remote In
Antal forudindstillede stationer:	18
CD-tekst:	Ja
Vigtig belysningsfarve:	Rød
Audio D/A-konverter (DAC):	1 bit
Udgangseffekt (DIN):	4 x 50 W
Filtype:	MP3, WMA, WAV