Planet WGS-818HP Manual

Planet Bryter WGS-818HP

Læs nedenfor 📖 manual på dansk for Planet WGS-818HP (3 sider) i kategorien Bryter. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 8-port 10/100/1000T Wall-

mounted Gigabit Ethernet Switch. The table below shows the

models with the number of ports:

Model Name 10/100/1000T

Copper Ports

802.3at PoE+

Ports Power Adapter

WGS-814HP DC 54V, 1.33A8 4

WGS-818HP DC 54V, 2.4A8 8

In the following section, unless specied, the term “Wall-mount

Gigabit Switch” mentioned in this user’s manual refers to the

above models.

Open the box of the Wall-mount Gigabit Switch and carefully

unpack it. The box should contain the following items:

The Wall-mount Gigabit Switch x 1 User’s Manual x 1

 WGS-814HP Front View

PoE+

3 421

7 865

60W

PoE Usage

45W

30W

15W

PWR

ACTLNK

PoE-in- Use

DC Input Range

48-56V

, 1. 5A max.

Standard

VLAN

Extend

Uplink

ACTLNK

Figure 2-1: WGS-814HP

 WGS-818HP Front View

PoE+

3 421

7 865

120W

PoE Usage

90W

60W

30W

PWR

ACTLNK

PoE-in- Use

DC Input Range

48-56V

, 3A max.

Standard

VLAN

Extend

Uplink

ACTLNK

PoE-in- Use

Figure 2-2: WGS-818HP

2.5 Physical Dimensions

W x D x H: 148 x 24.2 x 134 mm

PoE+

3 421

7 865

Uplink

60W

PoE Usage

45W

30W

15W

PWR

ACTLNK

PoE-in-Use

ACTLNK

DC Input Range

48-56V

, 1.5A max.

Standard

VLAN

Extend

45 Amber

Blinks To indicate the PoE usage is around 38W

to 44W.

Lights To indicate the PoE usage is over 45-watt

PoE power budget.

60 Amber

Blinks To indicate the PoE usage is around 53W

to 59W.

Lights To indicate the PoE usage is at the

maximum.

 PoE Power Usage of WGS-818HP (Unit: Watt)

LED Color Function

30 Amber

O To indicate the PoE usage is less than

14W.

Blinks To indicate the PoE usage is around 15W

to 29W.

Lights To indicate the PoE usage is over 30-watt

PoE power budget.

60 Amber

Blinks To indicate the PoE usage is around 45W

to 59W.

Lights To indicate the PoE usage is over 60-watt

PoE power budget.

90 Amber

Blinks To indicate the PoE usage is around 75W

to 89W.

Lights To indicate the PoE usage is over 90-watt

PoE power budget.

120 Amber

Blinks To indicate the PoE usage is around 105W

to 119W.

Lights To indicate the PoE usage is at the

maximum.

Wall-mounted Kit x 1 Magnet Kit x 1 RJ45 Dust Cap x 8

Power Adapter x 1 Power Cord x 1 DIN-rail Kit x 1

If any item is found missing or damaged, please contact your local

reseller for replacement.

2. Hardware Description

2.1 Switch Front View

The front panel of the Wall-mount Gigabit Switch consists of 8

Auto-Sensing 10/100/1000Mbps Ethernet RJ45 Ports. The LED

Indicators are also located on the RJ45 ports of the Wall-mount

Gigabit Switch.

2.2 LED Indicators

 System and Ports

LED Color Function

PWR Green Lights to indicate that the Switch has power.

LNK/

ACT Green

Lights To indicate the link through that port is

successfully established.

Blinks

To indicate that the switch is actively

sending or receiving data over that

port.

PoE-in-

Use Amber

Lights To indicate the port is providing DC

in-line power.

O To indicate the connected device is not

a PoE powered device (PD).

 PoE Power Usage of WGS-814HP (Unit: Watt)

LED Color Function

15 Amber

O To indicate the PoE usage is less than 7W.

Blinks To indicate the PoE usage is around 8W

to 14W.

Lights To indicate the PoE usage is over 15-watt

PoE power budget.

30 Amber

Blinks To indicate the PoE usage is around 23W

to 29W.

Lights To indicate the PoE usage is over 30-watt

PoE power budget.

2.4 DIP Switch

The front panel of Wall-mount Gigabit Switch provides one DIP

switch for and mode selections. The Standard, VLAN Extend

detailed descriptions are shown in the following table.

DIP Switch Mode Function

Standard

VLAN

Extend

This mode makes the Wall-mount Gigabit

Switch operate as a general switch and all

ports operate at 10/100/1000Mbps auto-

negotiation.

Standard

VLAN

Extend

This mode makes the Wall-mount Gigabit

Switch operate as a switch VLAN isolation

and

1. Port 1 to port 6 will isolate respectively.

2. Port 1 to port 6 can only communicate

with port 7 and port 8 (uplink port).

Standard

VLAN

Extend

This mode makes the Wall-mount Gigabit

Switch operate as a VLAN isolation switch and

1. Port 1 to port 6 will isolate respectively.

2. Port 1 to port 6 can only communicate

with port 7 and port 8 (uplink port).

3. 22~25-watt PoE transmit distance of 250m

at speed of 10Mbps.

Note

Please reboot the Wall-mount Gigabit Switch after

adjusting the DIP switch.

3. Installation

3.1 Wall-mount Installation

To install the Wall-mount Gigabit Switch on the wall, simply follow

the following steps:

Step 1: Place the Wall-mount Gigabit Switch on the wall and

mark the four holes with a pencil.

133mm

Ø4mm

Ø8mm

6mm

Step 2-1: Hammer the anchors provided into the four holes and

use the four screws to tightly x the switch onto the

wall by screwing them.

PoE+

7 8

Uplink

60W

PoE Usage

45W

30W

15W

PWR

CTLNK

Po n-U

ACTLNK

DC Input Range

48-56V

, 1.5A max.

Standard

VLAN

Extend

Produkt Specifikationer

Mærke:	Planet
Kategori:	Bryter
Model:	WGS-818HP
Bredde:	148 mm
Dybde:	25 mm
Højde:	134 mm
Vægt:	474 g
Opbevaringstemperatur (T-T):	-20 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 95 %
Driftstemperatur (T-T):	-20 - 60 °C
Netværksstandarder:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G understøttelse:	Ingen
Basis omskiftning RJ-45 Ethernet porte, antal:	8
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Stativ-montering:	Ja
Strømforsyning inkluderet:	Ingen
Stabelbar:	Ja