Posiflex SA-405Z Manual


Læs nedenfor 📖 manual på dansk for Posiflex SA-405Z (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Page 1
SA-405
USER’S MANUAL
Rev. : Original
I. FEATURES
Slim design to fit the new XT series: SA- - 405 for XT
3015/4015/3017.
Support optional 3G, MSR, and Finger Print Recognition Sensor.
ISO 7811 Magnetic Stripe Reader 3 tracks/JIS II MSR head in USB full speed
HID/KB wedge interface.
Single MSR head, 3 tracks, virtual COM interface.
Option ISO ID-Tech encrypted Magnetic Stripe Reader.
Can read AAMVA and CA DMV card.
Included with Posiflex USB MSR manager to fit customized needs.
For integration in Posiflex XT series POS touch terminal system.
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions manual, may cause interference to radio communications. It has been tested and found
to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required
to take whatever measures to correct the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the equipment is opened by any person other than the authorized
technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not
follow the instructions in application of this merchandise. The manufacturer is by no means responsible for any
damage or hazard caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS ISwithout warranty of any
kind. Posiflex Technology Inc. further disclaims all implied warranties including without limitation any implied
warranties of merchantability or of fitness for a particular purpose. The entire risk arising out of the use or performance
of the software and documentation remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the security upgrade kit SA-
405 for the Posiflex touch terminal systems. This series of products incorporate 2 delicately designed POS peripherals
each can be used as an excellent tool to accommodate the required security specially involved in POS business, kiosk
and hospitality operation. This manual covers the conceptual and operational aspects of these units. For technical
aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.
The manufacturer of the SA-405 heartily apologizes to the user for reserving the right to change or to modify
this manual without notice due to the rapid and constant progress and improvement on science and technology. The
user may always obtain the most up to date information through any of our web sites: http://www.posiflex.com or
http://www.posiflex.com.tw.
Copyright Posiflex Technology Inc. 2013
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system,
or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior
written consent of Posiflex Technology Inc. the publisher of this documentation
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Technology Inc., an ISO-9001
and ISO-14001 certified manufacturer. Other brand and product names are trademarks
and registered trademarks and service marks of
their respective owners.
II. INSTALLATION
1. HARDWARE INSTALLATION
You may find two screw holes on back of the right side of the display screen of XT series.
Align the washers included in your kit.
For installation, you may also take down the side cover firstly, connect tightly with the
cabled wire, and find two screw holes on back of the right side of the display screen of XT
series. Aim these 2 screws into the 2 holes with MSR then connect it with XT.
1.1 SA-405 ordered with XT-3015/4015/3017 series
In A) picture, remove the 2 screws on the side mount cover is on the back of the which
right side of main unit. In B) picture, connect the wired cable of SA-405 to the white
connector which is inside the side cover of XT 3015/4015/3017. If there are 2 devices
available, it is necessary to connect them to the 2 white connectors as illustrated below.
Similarly, connect with only one white connector thru the main hub on MSR to the desired
main unit if there are 3 devices or more available.
In C) picture, gently arrange the excessive length of this cable and -screw fit the SA- 405
back to the position which is occupied by the cover originally. Please reserve the cover if
there is a chance to have the side mount kit removed in the future.
A) B) C)
III DRIVER INSTALLATION
1. 405 For MSR: -The magnetic stripe reader in SA connects to the host through the
proprietary internal USB connecter ( connects to the USB poSA- 405 rt in I/O plate) working
as a USB KB and therefore requires no driver installation. The included Posiflex USB
MSR Manager helps configure the entire SA-405 MSR functionality. For a pplication in
OS other than Windows (such as MS- mDOS or Linux), some technical internal odifications
will be required and it is most advised to specify such conditions clearly when ordering the
SA- - 405. For application in MS DOS, please enable the USB keyboard and set USB
operation mode to Full/Low Speed in system CMOS setup. Refer toOperation Guide
for manipulation over the reader configuration.
P/N: 18630900010
警告使用者
警告使用者
警告使用者
警告使用者警告使用者 T31454
是甲產品住的
境中使用時,可能會造成射頻干
,在下,使會被
求採取某些適當的對


Produkt Specifikationer

Mærke: Posiflex
Kategori: Ikke kategoriseret
Model: SA-405Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Posiflex SA-405Z stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Posiflex Manualer

Posiflex

Posiflex PS-3616 Manual

9 December 2024
Posiflex

Posiflex PP-8800 Manual

9 December 2024
Posiflex

Posiflex TX-6100E Manual

19 September 2024
Posiflex

Posiflex MT-6210W Manual

18 September 2024
Posiflex

Posiflex PD-2610UE Manual

17 September 2024
Posiflex

Posiflex MR-2106 Manual

17 September 2024
Posiflex

Posiflex HC-1521P Manual

17 September 2024
Posiflex

Posiflex TX-2300-G2 Manual

6 September 2024
Posiflex

Posiflex TX-1000AE Manual

6 September 2024
Posiflex

Posiflex TX-5500 Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer