Posiflex SD-866W Manual

Posiflex Ikke kategoriseret SD-866W

Læs nedenfor 📖 manual på dansk for Posiflex SD-866W (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Page 1

SD-860/866/870/876 Series

Upgrade Kit

User’s Manual

Rev.: A0

I. FEATURES

 Upgrade kit for KS series (SD-860/866) and Jiva series (SD-870/876)

 Magnetic Stripe Reader in USB full speed HID interface

 Options for MSR heads covering ISO single head & dual head or JIS I/II

 3 tracks type MSR can read also AAMVA and CA DMV card

 Build-in RFID Reader with HID class (RF-300) in USB interface.

 Customization Options:

▪ MSR, Wi-Fi and RF300

▪ RF300

▪ MSR, RF300

▪ MSR and Wi-Fi.

▪ MSR.

▪ MSR and RFID/RFID-HID

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause

interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC

Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult his/her

dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by no

means responsible for any damage or hazard caused by improper application.

The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Technology, Inc. further disclaims

all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire risk arising out of

the use or performance of the software and documentation remains with you.

ABOUT THIS MANUAL

This manual is written in an attempt with full strength to assist the user to utilize the upgrade kit SD-860/866/870/876 for the Posiflex fan free touch

terminals

KS & TP series systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to accommodate the

required security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational aspects of these units.

For technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.

The manufacturer of the SD-860/866/870/876 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice

due to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any

of our web sites: http://www.posiflex.com or http://www.posiflex.com.tw.

 Copyright Posiflex Technology Inc. 2013

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,

electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Technology, Inc. the publisher of this documentation

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Posiflex Technology, Inc. an ISO-9001 and ISO-14001 certified manufacturer.